Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: nativeInst_s390.cpp Sprache: C

/*
* Copyright (c) 2016, 2022, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2016 SAP SE. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*
*/

// Major contributions by JL, LS

#include "precompiled.hpp"
#include "asm/macroAssembler.inline.hpp"
#include "memory/resourceArea.hpp"
#include "nativeInst_s390.hpp"
#include "oops/oop.inline.hpp"
#include "runtime/handles.hpp"
#include "runtime/sharedRuntime.hpp"
#include "runtime/stubRoutines.hpp"
#include "utilities/ostream.hpp"
#ifdef COMPILER1
#include "c1/c1_Runtime1.hpp"
#endif

#define LUCY_DBG

//-------------------------------------
//  N a t i v e I n s t r u c t i o n
//-------------------------------------

// Define this switch to prevent identity updates.
// In high-concurrency scenarios, it is beneficial to prevent
// identity updates. It has a positive effect on cache line steals.
// and invalidations.
// Test runs of JVM98, JVM2008, and JBB2005 show a very low frequency
// of identity updates. Detection is therefore disabled.
#undef SUPPRESS_IDENTITY_UPDATE

void NativeInstruction::verify() {
  // Make sure code pattern is actually an instruction address.
  // Do not allow:
  //  - NULL
  //  - any address in first page (0x0000 .. 0x0fff)
  //  - odd address (will cause a "specification exception")
  address addr = addr_at(0);
  if ((addr == 0) || (((unsigned long)addr & ~0x0fff) == 0) || ((intptr_t)addr & 1) != 0) {
    tty->print_cr(INTPTR_FORMAT ": bad instruction address", p2i(addr));
    fatal("not an instruction address");
  }
}

// Print location and value (hex representation) of current NativeInstruction
void NativeInstruction::print(const char* msg) const {
  int len = Assembler::instr_len(addr_at(0));
  if (msg == NULL) { // Output line without trailing blanks.
    switch (len) {
      case 2: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x",             p2i(addr_at(0)), len, halfword_at(0));                                 break;
      case 4: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x %4.4x",       p2i(addr_at(0)), len, halfword_at(0), halfword_at(2));                 break;
      case 6: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x %4.4x %4.4x", p2i(addr_at(0)), len, halfword_at(0), halfword_at(2), halfword_at(4)); break;
      default: // Never reached. instr_len() always returns one of the above values. Keep the compiler happy.
        ShouldNotReachHere();
        break;
    }
  } else { // Output line with filler blanks to have msg aligned.
    switch (len) {
      case 2: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x %s",   p2i(addr_at(0)), len, halfword_at(0), msg);                                 break;
      case 4: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x %4.4x %s",  p2i(addr_at(0)), len, halfword_at(0), halfword_at(2), msg);                 break;
      case 6: tty->print_cr(INTPTR_FORMAT "(len=%d): %4.4x %4.4x %4.4x %s", p2i(addr_at(0)), len, halfword_at(0), halfword_at(2), halfword_at(4), msg); break;
      default: // Never reached. instr_len() always returns one of the above values. Keep the compiler happy.
        ShouldNotReachHere();
        break;
    }
  }
}
void NativeInstruction::print() const {
  print(NULL);
}

// Hex-Dump of storage around current NativeInstruction. Also try disassembly.
void NativeInstruction::dump(const unsigned int range, const char* msg) const {
  Assembler::dump_code_range(tty, addr_at(0), range, (msg == NULL) ? "":msg);
}

void NativeInstruction::dump(const unsigned int range) const {
  dump(range, NULL);
}

void NativeInstruction::dump() const {
  dump(32, NULL);
}

void NativeInstruction::set_halfword_at(int offset, short i) {
  address addr = addr_at(offset);
#ifndef SUPPRESS_IDENTITY_UPDATE
  *(short*)addr = i;
#else
  if (*(short*)addr != i) {
    *(short*)addr = i;
  }
#endif
  ICache::invalidate_word(addr);
}

void NativeInstruction::set_word_at(int offset, int i) {
  address addr = addr_at(offset);
#ifndef SUPPRESS_IDENTITY_UPDATE
  *(int*)addr = i;
#else
  if (*(int*)addr != i) {
    *(int*)addr = i;
  }
#endif
  ICache::invalidate_word(addr);
}

void NativeInstruction::set_jlong_at(int offset, jlong i) {
  address addr = addr_at(offset);
#ifndef SUPPRESS_IDENTITY_UPDATE
  *(jlong*)addr = i;
#else
  if (*(jlong*)addr != i) {
    *(jlong*)addr = i;
  }
#endif
  // Don't need to invalidate 2 words here, because
  // the flush instruction operates on doublewords.
  ICache::invalidate_word(addr);
}

#undef  SUPPRESS_IDENTITY_UPDATE

//------------------------------------------------------------

int NativeInstruction::illegal_instruction() {
  return 0;
}

bool NativeInstruction::is_illegal() {
  // An instruction with main opcode 0x00 (leftmost byte) is not a valid instruction
  // (and will never be) and causes a SIGILL where the pc points to the next instruction.
  // The caller of this method wants to know if such a situation exists at the current pc.
  //
  // The result of this method is unsharp with respect to the following facts:
  // - Stepping backwards in the instruction stream is not possible on z/Architecture.
  // - z/Architecture instructions are 2, 4, or 6 bytes in length.
  // - The instruction length is coded in the leftmost two bits of the main opcode.
  // - The result is exact if the caller knows by some other means that the
  //   instruction is of length 2.
  //
  // If this method returns false, then the 2-byte instruction at *-2 is not a 0x00 opcode.
  // If this method returns true, then the 2-byte instruction at *-2 is a 0x00 opcode.
  return halfword_at(-2) == illegal_instruction();
}

// We use an illtrap for marking a method as not_entrant.
bool NativeInstruction::is_sigill_not_entrant() {
  if (!is_illegal()) return false; // Just a quick path.

  // One-sided error of is_illegal tolerable here
  // (see implementation of is_illegal() for details).

  CodeBlob* cb = CodeCache::find_blob(addr_at(0));
  if (cb == NULL || !cb->is_nmethod()) {
    return false;
  }

  nmethod *nm = (nmethod *)cb;
  // This method is not_entrant if the illtrap instruction
  // is located at the verified entry point.
  // BE AWARE: the current pc (this) points to the instruction after the
  // "illtrap" location.
  address sig_addr = ((address) this) - 2;
  return nm->verified_entry_point() == sig_addr;
}

bool NativeInstruction::is_jump() {
  unsigned long inst;
  Assembler::get_instruction((address)this, &inst);
  return MacroAssembler::is_branch_pcrelative_long(inst);
}

//---------------------------------------------------
//  N a t i v e I l l e g a l I n s t r u c t i o n
//---------------------------------------------------

void NativeIllegalInstruction::insert(address code_pos) {
  NativeIllegalInstruction* nii = (NativeIllegalInstruction*) nativeInstruction_at(code_pos);
  nii->set_halfword_at(0, illegal_instruction());
}

//-----------------------
//  N a t i v e C a l l
//-----------------------

void NativeCall::verify() {
  if (NativeCall::is_call_at(addr_at(0))) return;

  fatal("this is not a `NativeCall' site");
}

address NativeCall::destination() const {
  if (MacroAssembler::is_call_far_pcrelative(instruction_address())) {
    address here = addr_at(MacroAssembler::nop_size());
    return MacroAssembler::get_target_addr_pcrel(here);
  }

  return (address)((NativeMovConstReg *)this)->data();
}

// Similar to replace_mt_safe, but just changes the destination. The
// important thing is that free-running threads are able to execute this
// call instruction at all times. Thus, the displacement field must be
// 4-byte-aligned. We enforce this on z/Architecture by inserting a nop
// instruction in front of 'brasl' when needed.
//
// Used in the runtime linkage of calls; see class CompiledIC.
void NativeCall::set_destination_mt_safe(address dest) {
  if (MacroAssembler::is_call_far_pcrelative(instruction_address())) {
    address iaddr = addr_at(MacroAssembler::nop_size());
    // Ensure that patching is atomic hence mt safe.
    assert(((long)addr_at(MacroAssembler::call_far_pcrelative_size()) & (call_far_pcrelative_displacement_alignment-1)) == 0,
           "constant must be 4-byte aligned");
    set_word_at(MacroAssembler::call_far_pcrelative_size() - 4, Assembler::z_pcrel_off(dest, iaddr));
  } else {
    assert(MacroAssembler::is_load_const_from_toc(instruction_address()), "unsupported instruction");
    nativeMovConstReg_at(instruction_address())->set_data(((intptr_t)dest));
  }
}

//-----------------------------
//  N a t i v e F a r C a l l
//-----------------------------

void NativeFarCall::verify() {
  NativeInstruction::verify();
  if (NativeFarCall::is_far_call_at(addr_at(0))) return;
  fatal("not a NativeFarCall");
}

address NativeFarCall::destination() {
  assert(MacroAssembler::is_call_far_patchable_at((address)this), "unexpected call type");
  address ctable = NULL;
  return MacroAssembler::get_dest_of_call_far_patchable_at((address)this, ctable);
}

// Handles both patterns of patchable far calls.
void NativeFarCall::set_destination(address dest, int toc_offset) {
  address inst_addr = (address)this;

  // Set new destination (implementation of call may change here).
  assert(MacroAssembler::is_call_far_patchable_at(inst_addr), "unexpected call type");

  if (!MacroAssembler::is_call_far_patchable_pcrelative_at(inst_addr)) {
    address ctable = CodeCache::find_blob(inst_addr)->ctable_begin();
    // Need distance of TOC entry from current instruction.
    toc_offset = (ctable + toc_offset) - inst_addr;
    // Call is via constant table entry.
    MacroAssembler::set_dest_of_call_far_patchable_at(inst_addr, dest, toc_offset);
  } else {
    // Here, we have a pc-relative call (brasl).
    // Be aware: dest may have moved in this case, so really patch the displacement,
    // when necessary!
    // This while loop will also consume the nop which always precedes a call_far_pcrelative.
    // We need to revert this after the loop. Pc-relative calls are always assumed to have a leading nop.
    unsigned int nop_sz    = MacroAssembler::nop_size();
    unsigned int nop_bytes = 0;
    while(MacroAssembler::is_z_nop(inst_addr+nop_bytes)) {
      nop_bytes += nop_sz;
    }
    if (nop_bytes > 0) {
      inst_addr += nop_bytes - nop_sz;
    }

    assert(MacroAssembler::is_call_far_pcrelative(inst_addr), "not a pc-relative call");
    address target = MacroAssembler::get_target_addr_pcrel(inst_addr + nop_sz);
    if (target != dest) {
      NativeCall *call = nativeCall_at(inst_addr);
      call->set_destination_mt_safe(dest);
    }
  }
}

//-------------------------------------
//  N a t i v e M o v C o n s t R e g
//-------------------------------------

// Do not use an assertion here. Let clients decide whether they only
// want this when assertions are enabled.
void NativeMovConstReg::verify() {
  address   loc = addr_at(0);

  // This while loop will also consume the nop which always precedes a
  // call_far_pcrelative.  We need to revert this after the
  // loop. Pc-relative calls are always assumed to have a leading nop.
  unsigned int nop_sz    = MacroAssembler::nop_size();
  unsigned int nop_bytes = 0;
  while(MacroAssembler::is_z_nop(loc+nop_bytes)) {
    nop_bytes += nop_sz;
  }

  if (nop_bytes > 0) {
    if (MacroAssembler::is_call_far_pcrelative(loc+nop_bytes-nop_sz)) return;
    loc += nop_bytes;
  }

  if (!MacroAssembler::is_load_const_from_toc(loc)            &&    // Load const from TOC.
      !MacroAssembler::is_load_const(loc)                     &&    // Load const inline.
      !MacroAssembler::is_load_narrow_oop(loc)                &&    // Load narrow oop.
      !MacroAssembler::is_load_narrow_klass(loc)              &&    // Load narrow Klass ptr.
      !MacroAssembler::is_compare_immediate_narrow_oop(loc)   &&    // Compare immediate narrow.
      !MacroAssembler::is_compare_immediate_narrow_klass(loc) &&    // Compare immediate narrow.
      !MacroAssembler::is_pcrelative_instruction(loc)) {            // Just to make it run.
    tty->cr();
    tty->print_cr("NativeMovConstReg::verify(): verifying addr %p(0x%x), %d leading nops", loc, *(uint*)loc, nop_bytes/nop_sz);
    tty->cr();
    ((NativeMovConstReg*)loc)->dump(64, "NativeMovConstReg::verify()");
#ifdef LUCY_DBG
    VM_Version::z_SIGSEGV();
#endif
    fatal("this is not a `NativeMovConstReg' site");
  }
}

address NativeMovConstReg::next_instruction_address(int offset) const  {
  address inst_addr = addr_at(offset);

  // Load address (which is a constant) pc-relative.
  if (MacroAssembler::is_load_addr_pcrel(inst_addr))                  { return addr_at(offset+MacroAssembler::load_addr_pcrel_size()); }

  // Load constant from TOC.
  if (MacroAssembler::is_load_const_from_toc(inst_addr))              { return addr_at(offset+MacroAssembler::load_const_from_toc_size()); }

  // Load constant inline.
  if (MacroAssembler::is_load_const(inst_addr))                       { return addr_at(offset+MacroAssembler::load_const_size()); }

  // Load constant narrow inline.
  if (MacroAssembler::is_load_narrow_oop(inst_addr))                  { return addr_at(offset+MacroAssembler::load_narrow_oop_size()); }
  if (MacroAssembler::is_load_narrow_klass(inst_addr))                { return addr_at(offset+MacroAssembler::load_narrow_klass_size()); }

  // Compare constant narrow inline.
  if (MacroAssembler::is_compare_immediate_narrow_oop(inst_addr))     { return addr_at(offset+MacroAssembler::compare_immediate_narrow_oop_size()); }
  if (MacroAssembler::is_compare_immediate_narrow_klass(inst_addr))   { return addr_at(offset+MacroAssembler::compare_immediate_narrow_klass_size()); }

  if (MacroAssembler::is_call_far_patchable_pcrelative_at(inst_addr)) { return addr_at(offset+MacroAssembler::call_far_patchable_size()); }

  if (MacroAssembler::is_pcrelative_instruction(inst_addr))           { return addr_at(offset+Assembler::instr_len(inst_addr)); }

  ((NativeMovConstReg*)inst_addr)->dump(64, "NativeMovConstReg site is not recognized as such");
#ifdef LUCY_DBG
  VM_Version::z_SIGSEGV();
#else
  guarantee(false, "Not a NativeMovConstReg site");
#endif
  return NULL;
}

intptr_t NativeMovConstReg::data() const {
  address loc = addr_at(0);
  if (MacroAssembler::is_load_const(loc)) {
    return MacroAssembler::get_const(loc);
  } else if (MacroAssembler::is_load_narrow_oop(loc)              ||
             MacroAssembler::is_compare_immediate_narrow_oop(loc) ||
             MacroAssembler::is_load_narrow_klass(loc)            ||
             MacroAssembler::is_compare_immediate_narrow_klass(loc)) {
    ((NativeMovConstReg*)loc)->dump(32, "NativeMovConstReg::data(): cannot extract data from narrow ptr (oop or klass)");
#ifdef LUCY_DBG
    VM_Version::z_SIGSEGV();
#else
    ShouldNotReachHere();
#endif
    return *(intptr_t *)NULL;
  } else {
    // Otherwise, assume data resides in TOC. Is asserted in called method.
    return MacroAssembler::get_const_from_toc(loc);
  }
}

// Patch in a new constant.
//
// There are situations where we have multiple (hopefully two at most)
// relocations connected to one instruction. Loading an oop from CP
// using pcrelative addressing would one such example. Here we have an
// oop relocation, modifying the oop itself, and an internal word relocation,
// modifying the relative address.
//
// NativeMovConstReg::set_data is then called once for each relocation. To be
// able to distinguish between the relocations, we use a rather dirty hack:
//
// All calls that deal with an internal word relocation to fix their relative
// address are on a faked, odd instruction address. The instruction can be
// found on the next lower, even address.
//
// All other calls are "normal", i.e. on even addresses.
address NativeMovConstReg::set_data_plain(intptr_t src, CodeBlob *cb) {
  unsigned long x = (unsigned long)src;
  address loc = instruction_address();
  address next_address;

  if (MacroAssembler::is_load_addr_pcrel(loc)) {
    MacroAssembler::patch_target_addr_pcrel(loc, (address)src);
    ICache::invalidate_range(loc, MacroAssembler::load_addr_pcrel_size());
    next_address = next_instruction_address();
  } else if (MacroAssembler::is_load_const_from_toc(loc)) {  // Load constant from TOC.
    MacroAssembler::set_const_in_toc(loc, src, cb);
    next_address = next_instruction_address();
  } else if (MacroAssembler::is_load_const(loc)) {
    // Not mt safe, ok in methods like CodeBuffer::copy_code().
    MacroAssembler::patch_const(loc, x);
    ICache::invalidate_range(loc, MacroAssembler::load_const_size());
    next_address = next_instruction_address();
  }
  // cOops
  else if (MacroAssembler::is_load_narrow_oop(loc)) {
    MacroAssembler::patch_load_narrow_oop(loc, cast_to_oop((void*) x));
    ICache::invalidate_range(loc, MacroAssembler::load_narrow_oop_size());
    next_address = next_instruction_address();
  }
  // compressed klass ptrs
  else if (MacroAssembler::is_load_narrow_klass(loc)) {
    MacroAssembler::patch_load_narrow_klass(loc, (Klass*)x);
    ICache::invalidate_range(loc, MacroAssembler::load_narrow_klass_size());
    next_address = next_instruction_address();
  }
  // cOops
  else if (MacroAssembler::is_compare_immediate_narrow_oop(loc)) {
    MacroAssembler::patch_compare_immediate_narrow_oop(loc, cast_to_oop((void*) x));
    ICache::invalidate_range(loc, MacroAssembler::compare_immediate_narrow_oop_size());
    next_address = next_instruction_address();
  }
  // compressed klass ptrs
  else if (MacroAssembler::is_compare_immediate_narrow_klass(loc)) {
    MacroAssembler::patch_compare_immediate_narrow_klass(loc, (Klass*)x);
    ICache::invalidate_range(loc, MacroAssembler::compare_immediate_narrow_klass_size());
    next_address = next_instruction_address();
  }
  else if (MacroAssembler::is_call_far_patchable_pcrelative_at(loc)) {
    assert(ShortenBranches, "Wait a minute! A pc-relative call w/o ShortenBranches?");
    // This NativeMovConstReg site does not need to be patched. It was
    // patched when it was converted to a call_pcrelative site
    // before. The value of the src argument is not related to the
    // branch target.
    next_address = next_instruction_address();
  }

  else {
    tty->print_cr("WARNING: detected an unrecognized code pattern at loc = %p -> 0x%8.8x %8.8x",
                  loc, *((unsigned int*)loc), *((unsigned int*)(loc+4)));
    next_address = next_instruction_address(); // Failure should be handled in next_instruction_address().
#ifdef LUCY_DBG
    VM_Version::z_SIGSEGV();
#endif
  }

  return next_address;
}

// Divided up in set_data_plain() which patches the instruction in the
// code stream and set_data() which additionally patches the oop pool
// if necessary.
void NativeMovConstReg::set_data(intptr_t data, relocInfo::relocType expected_type) {
  // Also store the value into an oop_Relocation cell, if any.
  CodeBlob *cb = CodeCache::find_blob(instruction_address());
  address next_address = set_data_plain(data, cb);

  // 'RelocIterator' requires an nmethod
  nmethod* nm = cb ? cb->as_nmethod_or_null() : NULL;
  if (nm != NULL) {
    RelocIterator iter(nm, instruction_address(), next_address);
    oop* oop_addr = NULL;
    Metadata** metadata_addr = NULL;
    while (iter.next()) {
      if (iter.type() == relocInfo::oop_type) {
        oop_Relocation *r = iter.oop_reloc();
        if (oop_addr == NULL) {
          oop_addr = r->oop_addr();
          *oop_addr = cast_to_oop(data);
        } else {
          assert(oop_addr == r->oop_addr(), "must be only one set-oop here");
        }
      }
      if (iter.type() == relocInfo::metadata_type) {
        metadata_Relocation *r = iter.metadata_reloc();
        if (metadata_addr == NULL) {
          metadata_addr = r->metadata_addr();
          *metadata_addr = (Metadata*)data;
        } else {
          assert(metadata_addr == r->metadata_addr(), "must be only one set-metadata here");
        }
      }
    }
    assert(expected_type == relocInfo::none ||
          (expected_type == relocInfo::metadata_type && metadata_addr != NULL) ||
          (expected_type == relocInfo::oop_type && oop_addr != NULL),
          "%s relocation not found", expected_type == relocInfo::oop_type ? "oop" : "metadata");
  }
}

void NativeMovConstReg::set_narrow_oop(intptr_t data) {
  const address start = addr_at(0);
  int           range = 0;
  if (MacroAssembler::is_load_narrow_oop(start)) {
    range = MacroAssembler::patch_load_narrow_oop(start, cast_to_oop <intptr_t> (data));
  } else if (MacroAssembler::is_compare_immediate_narrow_oop(start)) {
    range = MacroAssembler::patch_compare_immediate_narrow_oop(start, cast_to_oop <intptr_t>(data));
  } else {
    fatal("this is not a `NativeMovConstReg::narrow_oop' site");
  }
  ICache::invalidate_range(start, range);
}

// Compressed klass ptrs. patch narrow klass constant.
void NativeMovConstReg::set_narrow_klass(intptr_t data) {
  const address start = addr_at(0);
  int           range = 0;
  if (MacroAssembler::is_load_narrow_klass(start)) {
    range = MacroAssembler::patch_load_narrow_klass(start, (Klass*)data);
  } else if (MacroAssembler::is_compare_immediate_narrow_klass(start)) {
    range = MacroAssembler::patch_compare_immediate_narrow_klass(start, (Klass*)data);
  } else {
    fatal("this is not a `NativeMovConstReg::narrow_klass' site");
  }
  ICache::invalidate_range(start, range);
}

void NativeMovConstReg::set_pcrel_addr(intptr_t newTarget, CompiledMethod *passed_nm /* = NULL */) {
  address next_address;
  address loc = addr_at(0);

  if (MacroAssembler::is_load_addr_pcrel(loc)) {
    address oldTarget = MacroAssembler::get_target_addr_pcrel(loc);
    MacroAssembler::patch_target_addr_pcrel(loc, (address)newTarget);

    ICache::invalidate_range(loc, MacroAssembler::load_addr_pcrel_size());
    next_address = loc + MacroAssembler::load_addr_pcrel_size();
  } else if (MacroAssembler::is_load_const_from_toc_pcrelative(loc) ) {  // Load constant from TOC.
    address oldTarget = MacroAssembler::get_target_addr_pcrel(loc);
    MacroAssembler::patch_target_addr_pcrel(loc, (address)newTarget);

    ICache::invalidate_range(loc, MacroAssembler::load_const_from_toc_size());
    next_address = loc + MacroAssembler::load_const_from_toc_size();
  } else if (MacroAssembler::is_call_far_patchable_pcrelative_at(loc)) {
    assert(ShortenBranches, "Wait a minute! A pc-relative call w/o ShortenBranches?");
    next_address = next_instruction_address();
  } else {
    assert(false, "Not a NativeMovConstReg site for set_pcrel_addr");
    next_address = next_instruction_address(); // Failure should be handled in next_instruction_address().
  }
}

void NativeMovConstReg::set_pcrel_data(intptr_t newData, CompiledMethod *passed_nm /* = NULL */) {
  address  next_address;
  address  loc = addr_at(0);

  if (MacroAssembler::is_load_const_from_toc(loc) ) {  // Load constant from TOC.
    // Offset is +/- 2**32 -> use long.
    long     offset  = MacroAssembler::get_load_const_from_toc_offset(loc);
    address  target  = MacroAssembler::get_target_addr_pcrel(loc);
    intptr_t oldData = *(intptr_t*)target;
    if (oldData != newData) { // Update only if data changes. Prevents cache invalidation.
      *(intptr_t *)(target) = newData;
    }

    // ICache::invalidate_range(target, sizeof(unsigned long));  // No ICache invalidate for CP data.
    next_address = loc + MacroAssembler::load_const_from_toc_size();
  } else if (MacroAssembler::is_call_far_pcrelative(loc)) {
    ((NativeMovConstReg*)loc)->dump(64, "NativeMovConstReg::set_pcrel_data() has a problem: setting data for a pc-relative call?");
#ifdef LUCY_DBG
    VM_Version::z_SIGSEGV();
#else
    assert(false, "Ooooops: setting data for a pc-relative call");
#endif
    next_address = next_instruction_address();
  } else {
    assert(false, "Not a NativeMovConstReg site for set_pcrel_data");
    next_address = next_instruction_address(); // Failure should be handled in next_instruction_address().
  }
}

#ifdef COMPILER1
//--------------------------------
//  N a t i v e M o v R e g M e m
//--------------------------------

void NativeMovRegMem::verify() {
  address l1 = addr_at(0);

  if (!MacroAssembler::is_load_const(l1)) {
    tty->cr();
    tty->print_cr("NativeMovRegMem::verify(): verifying addr " PTR_FORMAT, p2i(l1));
    tty->cr();
    ((NativeMovRegMem*)l1)->dump(64, "NativeMovConstReg::verify()");
    fatal("this is not a `NativeMovRegMem' site");
  }
}
#endif // COMPILER1

//-----------------------
//  N a t i v e J u m p
//-----------------------

void NativeJump::verify() {
  if (NativeJump::is_jump_at(addr_at(0))) return;
  fatal("this is not a `NativeJump' site");
}

// Patch atomically with an illtrap.
void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) {
  ResourceMark rm;
  int code_size = 2;
  CodeBuffer cb(verified_entry, code_size + 1);
  MacroAssembler* a = new MacroAssembler(&cb);
#ifdef COMPILER2
  assert(dest == SharedRuntime::get_handle_wrong_method_stub(), "expected fixed destination of patch");
#endif
  a->z_illtrap();
  ICache::invalidate_range(verified_entry, code_size);
}

#undef LUCY_DBG

//-------------------------------------
//  N a t i v e G e n e r a l J u m p
//-------------------------------------

#ifndef PRODUCT
void NativeGeneralJump::verify() {
  unsigned long inst;
  Assembler::get_instruction((address)this, &inst);
  assert(MacroAssembler::is_branch_pcrelative_long(inst), "not a general jump instruction");
}
#endif

void NativeGeneralJump::insert_unconditional(address code_pos, address entry) {
  uint64_t instr = BRCL_ZOPC |
                   Assembler::uimm4(Assembler::bcondAlways, 8, 48) |
                   Assembler::simm32(RelAddr::pcrel_off32(entry, code_pos), 16, 48);
  *(uint64_t*) code_pos = (instr << 16); // Must shift into big end, then the brcl will be written to code_pos.
  ICache::invalidate_range(code_pos, instruction_size);
}

void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) {
  assert(((intptr_t)instr_addr & (BytesPerWord-1)) == 0, "requirement for mt safe patching");
  // Bytes_after_jump cannot change, because we own the Patching_lock.
  assert(Patching_lock->owned_by_self(), "must hold lock to patch instruction");
  intptr_t bytes_after_jump = (*(intptr_t*)instr_addr)  & 0x000000000000ffffL; // 2 bytes after jump.
  intptr_t load_const_bytes = (*(intptr_t*)code_buffer) & 0xffffffffffff0000L;
  *(intptr_t*)instr_addr = load_const_bytes | bytes_after_jump;
  ICache::invalidate_range(instr_addr, 6);
}

¤ Dauer der Verarbeitung: 0.31 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.