Quelle  qcom-cpufreq-hw.c   Sprache: unbekannt

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
 */

#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/interconnect.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/units.h>

#define LUT_MAX_ENTRIES   40U
#define LUT_SRC    GENMASK(31, 30)
#define LUT_L_VAL   GENMASK(7, 0)
#define LUT_CORE_COUNT   GENMASK(18, 16)
#define LUT_VOLT   GENMASK(11, 0)
#define CLK_HW_DIV   2
#define LUT_TURBO_IND   1

#define GT_IRQ_STATUS   BIT(2)

#define MAX_FREQ_DOMAINS  4

struct qcom_cpufreq_soc_data {
 u32 reg_enable;
 u32 reg_domain_state;
 u32 reg_dcvs_ctrl;
 u32 reg_freq_lut;
 u32 reg_volt_lut;
 u32 reg_intr_clr;
 u32 reg_current_vote;
 u32 reg_perf_state;
 u8 lut_row_size;
};

struct qcom_cpufreq_data {
 void __iomem *base;

 /*
 * Mutex to synchronize between de-init sequence and re-starting LMh
 * polling/interrupts
 */
 struct mutex throttle_lock;
 int throttle_irq;
 char irq_name[15];
 bool cancel_throttle;
 struct delayed_work throttle_work;
 struct cpufreq_policy *policy;
 struct clk_hw cpu_clk;

 bool per_core_dcvs;
};

static struct {
 struct qcom_cpufreq_data *data;
 const struct qcom_cpufreq_soc_data *soc_data;
} qcom_cpufreq;

static unsigned long cpu_hw_rate, xo_rate;
static bool icc_scaling_enabled;

static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy,
          unsigned long freq_khz)
{
 unsigned long freq_hz = freq_khz * 1000;
 struct dev_pm_opp *opp;
 struct device *dev;
 int ret;

 dev = get_cpu_device(policy->cpu);
 if (!dev)
  return -ENODEV;

 opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true);
 if (IS_ERR(opp))
  return PTR_ERR(opp);

 ret = dev_pm_opp_set_opp(dev, opp);
 dev_pm_opp_put(opp);
 return ret;
}

static int qcom_cpufreq_update_opp(struct device *cpu_dev,
       unsigned long freq_khz,
       unsigned long volt)
{
 unsigned long freq_hz = freq_khz * 1000;
 int ret;

 /* Skip voltage update if the opp table is not available */
 if (!icc_scaling_enabled)
  return dev_pm_opp_add(cpu_dev, freq_hz, volt);

 ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt);
 if (ret) {
  dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz);
  return ret;
 }

 return dev_pm_opp_enable(cpu_dev, freq_hz);
}

static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
     unsigned int index)
{
 struct qcom_cpufreq_data *data = policy->driver_data;
 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
 unsigned long freq = policy->freq_table[index].frequency;
 unsigned int i;

 writel_relaxed(index, data->base + soc_data->reg_perf_state);

 if (data->per_core_dcvs)
  for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
   writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);

 if (icc_scaling_enabled)
  qcom_cpufreq_set_bw(policy, freq);

 return 0;
}

static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
{
 unsigned int lval;

 if (qcom_cpufreq.soc_data->reg_current_vote)
  lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_current_vote) & 0x3ff;
 else
  lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_domain_state) & 0xff;

 return lval * xo_rate;
}

/* Get the frequency requested by the cpufreq core for the CPU */
static unsigned int qcom_cpufreq_get_freq(struct cpufreq_policy *policy)
{
 struct qcom_cpufreq_data *data;
 const struct qcom_cpufreq_soc_data *soc_data;
 unsigned int index;

 if (!policy)
  return 0;

 data = policy->driver_data;
 soc_data = qcom_cpufreq.soc_data;

 index = readl_relaxed(data->base + soc_data->reg_perf_state);
 index = min(index, LUT_MAX_ENTRIES - 1);

 return policy->freq_table[index].frequency;
}

static unsigned int __qcom_cpufreq_hw_get(struct cpufreq_policy *policy)
{
 struct qcom_cpufreq_data *data;

 if (!policy)
  return 0;

 data = policy->driver_data;

 if (data->throttle_irq >= 0)
  return qcom_lmh_get_throttle_freq(data) / HZ_PER_KHZ;

 return qcom_cpufreq_get_freq(policy);
}

static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
{
 return __qcom_cpufreq_hw_get(cpufreq_cpu_get_raw(cpu));
}

static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
      unsigned int target_freq)
{
 struct qcom_cpufreq_data *data = policy->driver_data;
 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
 unsigned int index;
 unsigned int i;

 index = policy->cached_resolved_idx;
 writel_relaxed(index, data->base + soc_data->reg_perf_state);

 if (data->per_core_dcvs)
  for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
   writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);

 return policy->freq_table[index].frequency;
}

static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
        struct cpufreq_policy *policy)
{
 u32 data, src, lval, i, core_count, prev_freq = 0, freq;
 u32 volt;
 struct cpufreq_frequency_table *table;
 struct dev_pm_opp *opp;
 unsigned long rate;
 int ret;
 struct qcom_cpufreq_data *drv_data = policy->driver_data;
 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;

 table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
 if (!table)
  return -ENOMEM;

 ret = dev_pm_opp_of_add_table(cpu_dev);
 if (!ret) {
  /* Disable all opps and cross-validate against LUT later */
  icc_scaling_enabled = true;
  for (rate = 0; ; rate++) {
   opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
   if (IS_ERR(opp))
    break;

   dev_pm_opp_put(opp);
   dev_pm_opp_disable(cpu_dev, rate);
  }
 } else if (ret != -ENODEV) {
  dev_err(cpu_dev, "Invalid opp table in device tree\n");
  kfree(table);
  return ret;
 } else {
  policy->fast_switch_possible = true;
  icc_scaling_enabled = false;
 }

 for (i = 0; i < LUT_MAX_ENTRIES; i++) {
  data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
          i * soc_data->lut_row_size);
  src = FIELD_GET(LUT_SRC, data);
  lval = FIELD_GET(LUT_L_VAL, data);
  core_count = FIELD_GET(LUT_CORE_COUNT, data);

  data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
          i * soc_data->lut_row_size);
  volt = FIELD_GET(LUT_VOLT, data) * 1000;

  if (src)
   freq = xo_rate * lval / 1000;
  else
   freq = cpu_hw_rate / 1000;

  if (freq != prev_freq && core_count != LUT_TURBO_IND) {
   if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) {
    table[i].frequency = freq;
    dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
    freq, core_count);
   } else {
    dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq);
    table[i].frequency = CPUFREQ_ENTRY_INVALID;
   }

  } else if (core_count == LUT_TURBO_IND) {
   table[i].frequency = CPUFREQ_ENTRY_INVALID;
  }

  /*
 * Two of the same frequencies with the same core counts means
 * end of table
 */
  if (i > 0 && prev_freq == freq) {
   struct cpufreq_frequency_table *prev = &table[i - 1];

   /*
 * Only treat the last frequency that might be a boost
 * as the boost frequency
 */
   if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
    if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) {
     prev->frequency = prev_freq;
     prev->flags = CPUFREQ_BOOST_FREQ;
    } else {
     dev_warn(cpu_dev, "failed to update OPP for freq=%d\n",
       freq);
    }
   }

   break;
  }

  prev_freq = freq;
 }

 table[i].frequency = CPUFREQ_TABLE_END;
 policy->freq_table = table;
 dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);

 return 0;
}

static void qcom_get_related_cpus(int index, struct cpumask *m)
{
 struct device_node *cpu_np;
 struct of_phandle_args args;
 int cpu, ret;

 for_each_present_cpu(cpu) {
  cpu_np = of_cpu_device_node_get(cpu);
  if (!cpu_np)
   continue;

  ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
       "#freq-domain-cells", 0,
       &args);
  of_node_put(cpu_np);
  if (ret < 0)
   continue;

  if (index == args.args[0])
   cpumask_set_cpu(cpu, m);
 }
}

static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
{
 struct cpufreq_policy *policy = data->policy;
 int cpu = cpumask_first(policy->related_cpus);
 struct device *dev = get_cpu_device(cpu);
 unsigned long freq_hz, throttled_freq;
 struct dev_pm_opp *opp;

 /*
 * Get the h/w throttled frequency, normalize it using the
 * registered opp table and use it to calculate thermal pressure.
 */
 freq_hz = qcom_lmh_get_throttle_freq(data);

 opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
 if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
  opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);

 if (IS_ERR(opp)) {
  dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp);
 } else {
  dev_pm_opp_put(opp);
 }

 throttled_freq = freq_hz / HZ_PER_KHZ;

 /* Update HW pressure (the boost frequencies are accepted) */
 arch_update_hw_pressure(policy->related_cpus, throttled_freq);

 /*
 * In the unlikely case policy is unregistered do not enable
 * polling or h/w interrupt
 */
 mutex_lock(&data->throttle_lock);
 if (data->cancel_throttle)
  goto out;

 /*
 * If h/w throttled frequency is higher than what cpufreq has requested
 * for, then stop polling and switch back to interrupt mechanism.
 */
 if (throttled_freq >= qcom_cpufreq_get_freq(cpufreq_cpu_get_raw(cpu)))
  enable_irq(data->throttle_irq);
 else
  mod_delayed_work(system_highpri_wq, &data->throttle_work,
     msecs_to_jiffies(10));

out:
 mutex_unlock(&data->throttle_lock);
}

static void qcom_lmh_dcvs_poll(struct work_struct *work)
{
 struct qcom_cpufreq_data *data;

 data = container_of(work, struct qcom_cpufreq_data, throttle_work.work);
 qcom_lmh_dcvs_notify(data);
}

static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
{
 struct qcom_cpufreq_data *c_data = data;

 /* Disable interrupt and enable polling */
 disable_irq_nosync(c_data->throttle_irq);
 schedule_delayed_work(&c_data->throttle_work, 0);

 if (qcom_cpufreq.soc_data->reg_intr_clr)
  writel_relaxed(GT_IRQ_STATUS,
          c_data->base + qcom_cpufreq.soc_data->reg_intr_clr);

 return IRQ_HANDLED;
}

static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 .reg_enable = 0x0,
 .reg_dcvs_ctrl = 0xbc,
 .reg_freq_lut = 0x110,
 .reg_volt_lut = 0x114,
 .reg_current_vote = 0x704,
 .reg_perf_state = 0x920,
 .lut_row_size = 32,
};

static const struct qcom_cpufreq_soc_data epss_soc_data = {
 .reg_enable = 0x0,
 .reg_domain_state = 0x20,
 .reg_dcvs_ctrl = 0xb0,
 .reg_freq_lut = 0x100,
 .reg_volt_lut = 0x200,
 .reg_intr_clr = 0x308,
 .reg_perf_state = 0x320,
 .lut_row_size = 4,
};

static const struct of_device_id qcom_cpufreq_hw_match[] = {
 { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
 { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data },
 {}
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);

static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
{
 struct qcom_cpufreq_data *data = policy->driver_data;
 struct platform_device *pdev = cpufreq_get_driver_data();
 int ret;

 /*
 * Look for LMh interrupt. If no interrupt line is specified /
 * if there is an error, allow cpufreq to be enabled as usual.
 */
 data->throttle_irq = platform_get_irq_optional(pdev, index);
 if (data->throttle_irq == -ENXIO)
  return 0;
 if (data->throttle_irq < 0)
  return data->throttle_irq;

 data->cancel_throttle = false;

 mutex_init(&data->throttle_lock);
 INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);

 snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu);
 ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
       IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data);
 if (ret) {
  dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret);
  return 0;
 }

 ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
 if (ret)
  dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
   data->irq_name, data->throttle_irq);

 return 0;
}

static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy)
{
 struct qcom_cpufreq_data *data = policy->driver_data;
 struct platform_device *pdev = cpufreq_get_driver_data();
 int ret;

 if (data->throttle_irq <= 0)
  return 0;

 mutex_lock(&data->throttle_lock);
 data->cancel_throttle = false;
 mutex_unlock(&data->throttle_lock);

 ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
 if (ret)
  dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
   data->irq_name, data->throttle_irq);

 return ret;
}

static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy)
{
 struct qcom_cpufreq_data *data = policy->driver_data;

 if (data->throttle_irq <= 0)
  return 0;

 mutex_lock(&data->throttle_lock);
 data->cancel_throttle = true;
 mutex_unlock(&data->throttle_lock);

 cancel_delayed_work_sync(&data->throttle_work);
 irq_set_affinity_and_hint(data->throttle_irq, NULL);
 disable_irq_nosync(data->throttle_irq);

 return 0;
}

static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data)
{
 if (data->throttle_irq <= 0)
  return;

 free_irq(data->throttle_irq, data);
}

static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
{
 struct platform_device *pdev = cpufreq_get_driver_data();
 struct device *dev = &pdev->dev;
 struct of_phandle_args args;
 struct device_node *cpu_np;
 struct device *cpu_dev;
 struct qcom_cpufreq_data *data;
 int ret, index;

 cpu_dev = get_cpu_device(policy->cpu);
 if (!cpu_dev) {
  pr_err("%s: failed to get cpu%d device\n", __func__,
         policy->cpu);
  return -ENODEV;
 }

 cpu_np = of_cpu_device_node_get(policy->cpu);
 if (!cpu_np)
  return -EINVAL;

 ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
      "#freq-domain-cells", 0, &args);
 of_node_put(cpu_np);
 if (ret)
  return ret;

 index = args.args[0];
 data = &qcom_cpufreq.data[index];

 /* HW should be in enabled state to proceed */
 if (!(readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_enable) & 0x1)) {
  dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
  return -ENODEV;
 }

 if (readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_dcvs_ctrl) & 0x1)
  data->per_core_dcvs = true;

 qcom_get_related_cpus(index, policy->cpus);

 policy->driver_data = data;
 policy->dvfs_possible_from_any_cpu = true;
 data->policy = policy;

 ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
 if (ret) {
  dev_err(dev, "Domain-%d failed to read LUT\n", index);
  return ret;
 }

 ret = dev_pm_opp_get_opp_count(cpu_dev);
 if (ret <= 0) {
  dev_err(cpu_dev, "Failed to add OPPs\n");
  return -ENODEV;
 }

 return qcom_cpufreq_hw_lmh_init(policy, index);
}

static void qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
{
 struct device *cpu_dev = get_cpu_device(policy->cpu);
 struct qcom_cpufreq_data *data = policy->driver_data;

 dev_pm_opp_remove_all_dynamic(cpu_dev);
 dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
 qcom_cpufreq_hw_lmh_exit(data);
 kfree(policy->freq_table);
 kfree(data);
}

static void qcom_cpufreq_ready(struct cpufreq_policy *policy)
{
 struct qcom_cpufreq_data *data = policy->driver_data;

 if (data->throttle_irq >= 0)
  enable_irq(data->throttle_irq);
}

static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 .flags  = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
     CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
     CPUFREQ_IS_COOLING_DEV,
 .verify  = cpufreq_generic_frequency_table_verify,
 .target_index = qcom_cpufreq_hw_target_index,
 .get  = qcom_cpufreq_hw_get,
 .init  = qcom_cpufreq_hw_cpu_init,
 .exit  = qcom_cpufreq_hw_cpu_exit,
 .online  = qcom_cpufreq_hw_cpu_online,
 .offline = qcom_cpufreq_hw_cpu_offline,
 .register_em = cpufreq_register_em_with_opp,
 .fast_switch    = qcom_cpufreq_hw_fast_switch,
 .name  = "qcom-cpufreq-hw",
 .ready  = qcom_cpufreq_ready,
 .set_boost = cpufreq_boost_set_sw,
};

static unsigned long qcom_cpufreq_hw_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
 struct qcom_cpufreq_data *data = container_of(hw, struct qcom_cpufreq_data, cpu_clk);

 return __qcom_cpufreq_hw_get(data->policy) * HZ_PER_KHZ;
}

/*
 * Since we cannot determine the closest rate of the target rate, let's just
 * return the actual rate at which the clock is running at. This is needed to
 * make clk_set_rate() API work properly.
 */
static int qcom_cpufreq_hw_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
 req->rate = qcom_cpufreq_hw_recalc_rate(hw, 0);

 return 0;
}

static const struct clk_ops qcom_cpufreq_hw_clk_ops = {
 .recalc_rate = qcom_cpufreq_hw_recalc_rate,
 .determine_rate = qcom_cpufreq_hw_determine_rate,
};

static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
{
 struct clk_hw_onecell_data *clk_data;
 struct device *dev = &pdev->dev;
 struct device *cpu_dev;
 struct clk *clk;
 int ret, i, num_domains;

 clk = clk_get(dev, "xo");
 if (IS_ERR(clk))
  return PTR_ERR(clk);

 xo_rate = clk_get_rate(clk);
 clk_put(clk);

 clk = clk_get(dev, "alternate");
 if (IS_ERR(clk))
  return PTR_ERR(clk);

 cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
 clk_put(clk);

 cpufreq_qcom_hw_driver.driver_data = pdev;

 /* Check for optional interconnect paths on CPU0 */
 cpu_dev = get_cpu_device(0);
 if (!cpu_dev)
  return -EPROBE_DEFER;

 ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL);
 if (ret)
  return dev_err_probe(dev, ret, "Failed to find icc paths\n");

 for (num_domains = 0; num_domains < MAX_FREQ_DOMAINS; num_domains++)
  if (!platform_get_resource(pdev, IORESOURCE_MEM, num_domains))
   break;

 qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
      GFP_KERNEL);
 if (!qcom_cpufreq.data)
  return -ENOMEM;

 qcom_cpufreq.soc_data = of_device_get_match_data(dev);
 if (!qcom_cpufreq.soc_data)
  return -ENODEV;

 clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, num_domains), GFP_KERNEL);
 if (!clk_data)
  return -ENOMEM;

 clk_data->num = num_domains;

 for (i = 0; i < num_domains; i++) {
  struct qcom_cpufreq_data *data = &qcom_cpufreq.data[i];
  struct clk_init_data clk_init = {};
  void __iomem *base;

  base = devm_platform_ioremap_resource(pdev, i);
  if (IS_ERR(base)) {
   dev_err(dev, "Failed to map resource index %d\n", i);
   return PTR_ERR(base);
  }

  data->base = base;

  /* Register CPU clock for each frequency domain */
  clk_init.name = kasprintf(GFP_KERNEL, "qcom_cpufreq%d", i);
  if (!clk_init.name)
   return -ENOMEM;

  clk_init.flags = CLK_GET_RATE_NOCACHE;
  clk_init.ops = &qcom_cpufreq_hw_clk_ops;
  data->cpu_clk.init = &clk_init;

  ret = devm_clk_hw_register(dev, &data->cpu_clk);
  if (ret < 0) {
   dev_err(dev, "Failed to register clock %d: %d\n", i, ret);
   kfree(clk_init.name);
   return ret;
  }

  clk_data->hws[i] = &data->cpu_clk;
  kfree(clk_init.name);
 }

 ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
 if (ret < 0) {
  dev_err(dev, "Failed to add clock provider\n");
  return ret;
 }

 ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
 if (ret)
  dev_err(dev, "CPUFreq HW driver failed to register\n");
 else
  dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");

 return ret;
}

static void qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
{
 cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
}

static struct platform_driver qcom_cpufreq_hw_driver = {
 .probe = qcom_cpufreq_hw_driver_probe,
 .remove = qcom_cpufreq_hw_driver_remove,
 .driver = {
  .name = "qcom-cpufreq-hw",
  .of_match_table = qcom_cpufreq_hw_match,
 },
};

static int __init qcom_cpufreq_hw_init(void)
{
 return platform_driver_register(&qcom_cpufreq_hw_driver);
}
postcore_initcall(qcom_cpufreq_hw_init);

static void __exit qcom_cpufreq_hw_exit(void)
{
 platform_driver_unregister(&qcom_cpufreq_hw_driver);
}
module_exit(qcom_cpufreq_hw_exit);

MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver");
MODULE_LICENSE("GPL v2");