Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/LibreOffice/sc/qa/uitest/statistics/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 10 kB image not shown  

SSL etherh.c   Interaktion und
PortierbarkeitC

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/drivers/acorn/net/etherh.c
 *
 *  Copyright (C) 2000-2002 Russell King
 *
 * NS8390 I-cubed EtherH and ANT EtherM specific driver
 * Thanks to I-Cubed for information on their cards.
 * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
 * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
 * EtherM integration re-engineered by Russell King.
 *
 * Changelog:
 *  08-12-1996 RMK 1.00 Created
 * RMK 1.03 Added support for EtherLan500 cards
 *  23-11-1997 RMK 1.04 Added media autodetection
 *  16-04-1998 RMK 1.05 Improved media autodetection
 *  10-02-2000 RMK 1.06 Updated for 2.3.43
 *  13-05-2000 RMK 1.07 Updated for 2.3.99-pre8
 *  12-10-1999  CK/TEW EtherM driver first release
 *  21-12-2000 TTC EtherH/EtherM integration
 *  25-12-2000 RMK 1.08 Clean integration of EtherM into this driver.
 *  03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot.
 */


#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>

#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/system_info.h>

#define EI_SHIFT(x) (ei_local->reg_offset[x])

#define ei_inb(_p)  readb((void __iomem *)_p)
#define ei_outb(_v,_p)  writeb(_v,(void __iomem *)_p)
#define ei_inb_p(_p)  readb((void __iomem *)_p)
#define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p)

#define DRV_NAME "etherh"
#define DRV_VERSION "1.11"

static char version[] =
 "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";

#include "lib8390.c"

struct etherh_priv {
 void __iomem *ioc_fast;
 void __iomem *memc;
 void __iomem *dma_base;
 unsigned int id;
 void __iomem *ctrl_port;
 unsigned char ctrl;
 u32  supported;
};

struct etherh_data {
 unsigned long ns8390_offset;
 unsigned long dataport_offset;
 unsigned long ctrlport_offset;
 int  ctrl_ioc;
 const char name[16];
 u32  supported;
 unsigned char tx_start_page;
 unsigned char stop_page;
};

MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("EtherH/EtherM driver");
MODULE_LICENSE("GPL");

#define ETHERH500_DATAPORT 0x800 /* MEMC */
#define ETHERH500_NS8390 0x000 /* MEMC */
#define ETHERH500_CTRLPORT 0x800 /* IOC  */

#define ETHERH600_DATAPORT 0x040 /* MEMC */
#define ETHERH600_NS8390 0x800 /* MEMC */
#define ETHERH600_CTRLPORT 0x200 /* MEMC */

#define ETHERH_CP_IE  1
#define ETHERH_CP_IF  2
#define ETHERH_CP_HEARTBEAT 2

#define ETHERH_TX_START_PAGE 1
#define ETHERH_STOP_PAGE 127

/*
 * These came from CK/TEW
 */

#define ETHERM_DATAPORT  0x200 /* MEMC */
#define ETHERM_NS8390  0x800 /* MEMC */
#define ETHERM_CTRLPORT  0x23c /* MEMC */

#define ETHERM_TX_START_PAGE 64
#define ETHERM_STOP_PAGE 127

/* ------------------------------------------------------------------------ */

#define etherh_priv(dev) \
 ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))

static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
{
 unsigned char ctrl = eh->ctrl | mask;
 eh->ctrl = ctrl;
 writeb(ctrl, eh->ctrl_port);
}

static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
{
 unsigned char ctrl = eh->ctrl & ~mask;
 eh->ctrl = ctrl;
 writeb(ctrl, eh->ctrl_port);
}

static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
{
 return readb(eh->ctrl_port);
}




static void etherh_irq_enable(ecard_t *ec, int irqnr)
{
 struct etherh_priv *eh = ec->irq_data;

 etherh_set_ctrl(eh, ETHERH_CP_IE);
}

static void etherh_irq_disable(ecard_t *ec, int irqnr)
{
 struct etherh_priv *eh = ec->irq_data;

 etherh_clr_ctrl(eh, ETHERH_CP_IE);
}

static expansioncard_ops_t etherh_ops = {
 .irqenable = etherh_irq_enable,
 .irqdisable = etherh_irq_disable,
};




static void
etherh_setif(struct net_device *dev)
{
 struct ei_device *ei_local = netdev_priv(dev);
 unsigned long flags;
 void __iomem *addr;

 local_irq_save(flags);

 /* set the interface type */
 switch (etherh_priv(dev)->id) {
 case PROD_I3_ETHERLAN600:
 case PROD_I3_ETHERLAN600A:
  addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;

  switch (dev->if_port) {
  case IF_PORT_10BASE2:
   writeb((readb(addr) & 0xf8) | 1, addr);
   break;
  case IF_PORT_10BASET:
   writeb((readb(addr) & 0xf8), addr);
   break;
  }
  break;

 case PROD_I3_ETHERLAN500:
  switch (dev->if_port) {
  case IF_PORT_10BASE2:
   etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
   break;

  case IF_PORT_10BASET:
   etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
   break;
  }
  break;

 default:
  break;
 }

 local_irq_restore(flags);
}

static int
etherh_getifstat(struct net_device *dev)
{
 struct ei_device *ei_local = netdev_priv(dev);
 void __iomem *addr;
 int stat = 0;

 switch (etherh_priv(dev)->id) {
 case PROD_I3_ETHERLAN600:
 case PROD_I3_ETHERLAN600A:
  addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
  switch (dev->if_port) {
  case IF_PORT_10BASE2:
   stat = 1;
   break;
  case IF_PORT_10BASET:
   stat = readb(addr) & 4;
   break;
  }
  break;

 case PROD_I3_ETHERLAN500:
  switch (dev->if_port) {
  case IF_PORT_10BASE2:
   stat = 1;
   break;
  case IF_PORT_10BASET:
   stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
   break;
  }
  break;

 default:
  stat = 0;
  break;
 }

 return stat != 0;
}

/*
 * Configure the interface.  Note that we ignore the other
 * parts of ifmap, since its mostly meaningless for this driver.
 */

static int etherh_set_config(struct net_device *dev, struct ifmap *map)
{
 switch (map->port) {
 case IF_PORT_10BASE2:
 case IF_PORT_10BASET:
  /*
 * If the user explicitly sets the interface
 * media type, turn off automedia detection.
 */

  dev->flags &= ~IFF_AUTOMEDIA;
  WRITE_ONCE(dev->if_port, map->port);
  break;

 default:
  return -EINVAL;
 }

 etherh_setif(dev);

 return 0;
}

/*
 * Reset the 8390 (hard reset).  Note that we can't actually do this.
 */

static void
etherh_reset(struct net_device *dev)
{
 struct ei_device *ei_local = netdev_priv(dev);
 void __iomem *addr = (void __iomem *)dev->base_addr;

 writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);

 /*
 * See if we need to change the interface type.
 * Note that we use 'interface_num' as a flag
 * to indicate that we need to change the media.
 */

 if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
  ei_local->interface_num = 0;

  if (dev->if_port == IF_PORT_10BASET)
   dev->if_port = IF_PORT_10BASE2;
  else
   dev->if_port = IF_PORT_10BASET;

  etherh_setif(dev);
 }
}

/*
 * Write a block of data out to the 8390
 */

static void
etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
{
 struct ei_device *ei_local = netdev_priv(dev);
 unsigned long dma_start;
 void __iomem *dma_base, *addr;

 if (ei_local->dmaing) {
  netdev_err(dev, "DMAing conflict in etherh_block_input: "
      " DMAstat %d irqlock %d\n",
      ei_local->dmaing, ei_local->irqlock);
  return;
 }

 /*
 * Make sure we have a round number of bytes if we're in word mode.
 */

 if (count & 1 && ei_local->word16)
  count++;

 ei_local->dmaing = 1;

 addr = (void __iomem *)dev->base_addr;
 dma_base = etherh_priv(dev)->dma_base;

 count = (count + 1) & ~1;
 writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);

 writeb (0x42, addr + EN0_RCNTLO);
 writeb (0x00, addr + EN0_RCNTHI);
 writeb (0x42, addr + EN0_RSARLO);
 writeb (0x00, addr + EN0_RSARHI);
 writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);

 udelay (1);

 writeb (ENISR_RDC, addr + EN0_ISR);
 writeb (count, addr + EN0_RCNTLO);
 writeb (count >> 8, addr + EN0_RCNTHI);
 writeb (0, addr + EN0_RSARLO);
 writeb (start_page, addr + EN0_RSARHI);
 writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);

 if (ei_local->word16)
  writesw (dma_base, buf, count >> 1);
 else
  writesb (dma_base, buf, count);

 dma_start = jiffies;

 while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
  if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
   netdev_warn(dev, "timeout waiting for TX RDC\n");
   etherh_reset (dev);
   __NS8390_init (dev, 1);
   break;
  }

 writeb (ENISR_RDC, addr + EN0_ISR);
 ei_local->dmaing = 0;
}

/*
 * Read a block of data from the 8390
 */

static void
etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
{
 struct ei_device *ei_local = netdev_priv(dev);
 unsigned char *buf;
 void __iomem *dma_base, *addr;

 if (ei_local->dmaing) {
  netdev_err(dev, "DMAing conflict in etherh_block_input: "
      " DMAstat %d irqlock %d\n",
      ei_local->dmaing, ei_local->irqlock);
  return;
 }

 ei_local->dmaing = 1;

 addr = (void __iomem *)dev->base_addr;
 dma_base = etherh_priv(dev)->dma_base;

 buf = skb->data;
 writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
 writeb (count, addr + EN0_RCNTLO);
 writeb (count >> 8, addr + EN0_RCNTHI);
 writeb (ring_offset, addr + EN0_RSARLO);
 writeb (ring_offset >> 8, addr + EN0_RSARHI);
 writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);

 if (ei_local->word16) {
  readsw (dma_base, buf, count >> 1);
  if (count & 1)
   buf[count - 1] = readb (dma_base);
 } else
  readsb (dma_base, buf, count);

 writeb (ENISR_RDC, addr + EN0_ISR);
 ei_local->dmaing = 0;
}

/*
 * Read a header from the 8390
 */

static void
etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
{
 struct ei_device *ei_local = netdev_priv(dev);
 void __iomem *dma_base, *addr;

 if (ei_local->dmaing) {
  netdev_err(dev, "DMAing conflict in etherh_get_header: "
      " DMAstat %d irqlock %d\n",
      ei_local->dmaing, ei_local->irqlock);
  return;
 }

 ei_local->dmaing = 1;

 addr = (void __iomem *)dev->base_addr;
 dma_base = etherh_priv(dev)->dma_base;

 writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
 writeb (sizeof (*hdr), addr + EN0_RCNTLO);
 writeb (0, addr + EN0_RCNTHI);
 writeb (0, addr + EN0_RSARLO);
 writeb (ring_page, addr + EN0_RSARHI);
 writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);

 if (ei_local->word16)
  readsw (dma_base, hdr, sizeof (*hdr) >> 1);
 else
  readsb (dma_base, hdr, sizeof (*hdr));

 writeb (ENISR_RDC, addr + EN0_ISR);
 ei_local->dmaing = 0;
}

/*
 * Open/initialize the board.  This is called (in the current kernel)
 * sometime after booting when the 'ifconfig' program is run.
 *
 * This routine should set everything up anew at each open, even
 * registers that "should" only need to be set once at boot, so that
 * there is non-reboot way to recover if something goes wrong.
 */

static int
etherh_open(struct net_device *dev)
{
 struct ei_device *ei_local = netdev_priv(dev);

 if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev))
  return -EAGAIN;

 /*
 * Make sure that we aren't going to change the
 * media type on the next reset - we are about to
 * do automedia manually now.
 */

 ei_local->interface_num = 0;

 /*
 * If we are doing automedia detection, do it now.
 * This is more reliable than the 8390's detection.
 */

 if (dev->flags & IFF_AUTOMEDIA) {
  dev->if_port = IF_PORT_10BASET;
  etherh_setif(dev);
  mdelay(1);
  if (!etherh_getifstat(dev)) {
   dev->if_port = IF_PORT_10BASE2;
   etherh_setif(dev);
  }
 } else
  etherh_setif(dev);

 etherh_reset(dev);
 __ei_open(dev);

 return 0;
}

/*
 * The inverse routine to etherh_open().
 */

static int
etherh_close(struct net_device *dev)
{
 __ei_close (dev);
 free_irq (dev->irq, dev);
 return 0;
}

/*
 * Read the ethernet address string from the on board rom.
 * This is an ascii string...
 */

static int etherh_addr(char *addr, struct expansion_card *ec)
{
 struct in_chunk_dir cd;
 char *s;
 
 if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
  printk(KERN_ERR "%s: unable to read module description string\n",
         dev_name(&ec->dev));
  goto no_addr;
 }

 s = strchr(cd.d.string, '(');
 if (s) {
  int i;

  for (i = 0; i < 6; i++) {
   addr[i] = simple_strtoul(s + 1, &s, 0x10);
   if (*s != (i == 5? ')' : ':'))
    break;
  }

  if (i == 6)
   return 0;
 }

 printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
        dev_name(&ec->dev), cd.d.string);

 no_addr:
 return -ENODEV;
}

/*
 * Create an ethernet address from the system serial number.
 */

static int __init etherm_addr(char *addr)
{
 unsigned int serial;

 if (system_serial_low == 0 && system_serial_high == 0)
  return -ENODEV;

 serial = system_serial_low | system_serial_high;

 addr[0] = 0;
 addr[1] = 0;
 addr[2] = 0xa4;
 addr[3] = 0x10 + (serial >> 24);
 addr[4] = serial >> 16;
 addr[5] = serial >> 8;
 return 0;
}

static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
 strscpy(info->driver, DRV_NAME, sizeof(info->driver));
 strscpy(info->version, DRV_VERSION, sizeof(info->version));
 strscpy(info->bus_info, dev_name(dev->dev.parent),
  sizeof(info->bus_info));
}

static int etherh_get_link_ksettings(struct net_device *dev,
         struct ethtool_link_ksettings *cmd)
{
 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
      etherh_priv(dev)->supported);
 cmd->base.speed = SPEED_10;
 cmd->base.duplex = DUPLEX_HALF;
 cmd->base.port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
 cmd->base.autoneg = (dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE :
         AUTONEG_DISABLE);
 return 0;
}

static int etherh_set_link_ksettings(struct net_device *dev,
         const struct ethtool_link_ksettings *cmd)
{
 switch (cmd->base.autoneg) {
 case AUTONEG_ENABLE:
  dev->flags |= IFF_AUTOMEDIA;
  break;

 case AUTONEG_DISABLE:
  switch (cmd->base.port) {
  case PORT_TP:
   dev->if_port = IF_PORT_10BASET;
   break;

  case PORT_BNC:
   dev->if_port = IF_PORT_10BASE2;
   break;

  default:
   return -EINVAL;
  }
  dev->flags &= ~IFF_AUTOMEDIA;
  break;

 default:
  return -EINVAL;
 }

 etherh_setif(dev);

 return 0;
}

static u32 etherh_get_msglevel(struct net_device *dev)
{
 struct ei_device *ei_local = netdev_priv(dev);

 return ei_local->msg_enable;
}

static void etherh_set_msglevel(struct net_device *dev, u32 v)
{
 struct ei_device *ei_local = netdev_priv(dev);

 ei_local->msg_enable = v;
}

static const struct ethtool_ops etherh_ethtool_ops = {
 .get_drvinfo  = etherh_get_drvinfo,
 .get_ts_info  = ethtool_op_get_ts_info,
 .get_msglevel  = etherh_get_msglevel,
 .set_msglevel  = etherh_set_msglevel,
 .get_link_ksettings = etherh_get_link_ksettings,
 .set_link_ksettings = etherh_set_link_ksettings,
};

static const struct net_device_ops etherh_netdev_ops = {
 .ndo_open  = etherh_open,
 .ndo_stop  = etherh_close,
 .ndo_set_config  = etherh_set_config,
 .ndo_start_xmit  = __ei_start_xmit,
 .ndo_tx_timeout  = __ei_tx_timeout,
 .ndo_get_stats  = __ei_get_stats,
 .ndo_set_rx_mode = __ei_set_multicast_list,
 .ndo_validate_addr = eth_validate_addr,
 .ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
 .ndo_poll_controller = __ei_poll,
#endif
};

static u32 etherh_regoffsets[16];
static u32 etherm_regoffsets[16];

static int
etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
{
 const struct etherh_data *data = id->data;
 struct ei_device *ei_local;
 struct net_device *dev;
 struct etherh_priv *eh;
 u8 addr[ETH_ALEN];
 int ret;

 ret = ecard_request_resources(ec);
 if (ret)
  goto out;

 dev = ____alloc_ei_netdev(sizeof(struct etherh_priv));
 if (!dev) {
  ret = -ENOMEM;
  goto release;
 }

 SET_NETDEV_DEV(dev, &ec->dev);

 dev->netdev_ops  = ðerh_netdev_ops;
 dev->irq  = ec->irq;
 dev->ethtool_ops = ðerh_ethtool_ops;

 if (data->supported & SUPPORTED_Autoneg)
  dev->flags |= IFF_AUTOMEDIA;
 if (data->supported & SUPPORTED_TP) {
  dev->flags |= IFF_PORTSEL;
  dev->if_port = IF_PORT_10BASET;
 } else if (data->supported & SUPPORTED_BNC) {
  dev->flags |= IFF_PORTSEL;
  dev->if_port = IF_PORT_10BASE2;
 } else
  dev->if_port = IF_PORT_UNKNOWN;

 eh = etherh_priv(dev);
 eh->supported  = data->supported;
 eh->ctrl  = 0;
 eh->id   = ec->cid.product;
 eh->memc  = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE);
 if (!eh->memc) {
  ret = -ENOMEM;
  goto free;
 }

 eh->ctrl_port = eh->memc;
 if (data->ctrl_ioc) {
  eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE);
  if (!eh->ioc_fast) {
   ret = -ENOMEM;
   goto free;
  }
  eh->ctrl_port = eh->ioc_fast;
 }

 dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
 eh->dma_base = eh->memc + data->dataport_offset;
 eh->ctrl_port += data->ctrlport_offset;

 /*
 * IRQ and control port handling - only for non-NIC slot cards.
 */

 if (ec->slot_no != 8) {
  ecard_setirq(ec, ðerh_ops, eh);
 } else {
  /*
 * If we're in the NIC slot, make sure the IRQ is enabled
 */

  etherh_set_ctrl(eh, ETHERH_CP_IE);
 }

 ei_local = netdev_priv(dev);
 spin_lock_init(&ei_local->page_lock);

 if (ec->cid.product == PROD_ANT_ETHERM) {
  etherm_addr(addr);
  ei_local->reg_offset = etherm_regoffsets;
 } else {
  etherh_addr(addr, ec);
  ei_local->reg_offset = etherh_regoffsets;
 }
 eth_hw_addr_set(dev, addr);

 ei_local->name          = dev->name;
 ei_local->word16        = 1;
 ei_local->tx_start_page = data->tx_start_page;
 ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
 ei_local->stop_page     = data->stop_page;
 ei_local->reset_8390    = etherh_reset;
 ei_local->block_input   = etherh_block_input;
 ei_local->block_output  = etherh_block_output;
 ei_local->get_8390_hdr  = etherh_get_header;
 ei_local->interface_num = 0;

 etherh_reset(dev);
 __NS8390_init(dev, 0);

 ret = register_netdev(dev);
 if (ret)
  goto free;

 netdev_info(dev, "%s in slot %d, %pM\n",
      data->name, ec->slot_no, dev->dev_addr);

 ecard_set_drvdata(ec, dev);

 return 0;

 free:
 free_netdev(dev);
 release:
 ecard_release_resources(ec);
 out:
 return ret;
}

static void etherh_remove(struct expansion_card *ec)
{
 struct net_device *dev = ecard_get_drvdata(ec);

 ecard_set_drvdata(ec, NULL);

 unregister_netdev(dev);

 free_netdev(dev);

 ecard_release_resources(ec);
}

static struct etherh_data etherm_data = {
 .ns8390_offset  = ETHERM_NS8390,
 .dataport_offset = ETHERM_NS8390 + ETHERM_DATAPORT,
 .ctrlport_offset = ETHERM_NS8390 + ETHERM_CTRLPORT,
 .name   = "ANT EtherM",
 .supported  = SUPPORTED_10baseT_Half,
 .tx_start_page  = ETHERM_TX_START_PAGE,
 .stop_page  = ETHERM_STOP_PAGE,
};

static struct etherh_data etherlan500_data = {
 .ns8390_offset  = ETHERH500_NS8390,
 .dataport_offset = ETHERH500_NS8390 + ETHERH500_DATAPORT,
 .ctrlport_offset = ETHERH500_CTRLPORT,
 .ctrl_ioc  = 1,
 .name   = "i3 EtherH 500",
 .supported  = SUPPORTED_10baseT_Half,
 .tx_start_page  = ETHERH_TX_START_PAGE,
 .stop_page  = ETHERH_STOP_PAGE,
};

static struct etherh_data etherlan600_data = {
 .ns8390_offset  = ETHERH600_NS8390,
 .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT,
 .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
 .name   = "i3 EtherH 600",
 .supported  = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
 .tx_start_page  = ETHERH_TX_START_PAGE,
 .stop_page  = ETHERH_STOP_PAGE,
};

static struct etherh_data etherlan600a_data = {
 .ns8390_offset  = ETHERH600_NS8390,
 .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT,
 .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
 .name   = "i3 EtherH 600A",
 .supported  = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
 .tx_start_page  = ETHERH_TX_START_PAGE,
 .stop_page  = ETHERH_STOP_PAGE,
};

static const struct ecard_id etherh_ids[] = {
 { MANU_ANT, PROD_ANT_ETHERM,      ðerm_data       },
 { MANU_I3,  PROD_I3_ETHERLAN500,  ðerlan500_data  },
 { MANU_I3,  PROD_I3_ETHERLAN600,  ðerlan600_data  },
 { MANU_I3,  PROD_I3_ETHERLAN600A, ðerlan600a_data },
 { 0xffff,   0xffff }
};

static struct ecard_driver etherh_driver = {
 .probe  = etherh_probe,
 .remove  = etherh_remove,
 .id_table = etherh_ids,
 .drv = {
  .name = DRV_NAME,
 },
};

static int __init etherh_init(void)
{
 int i;

 for (i = 0; i < 16; i++) {
  etherh_regoffsets[i] = i << 2;
  etherm_regoffsets[i] = i << 5;
 }

 return ecard_register_driver(ðerh_driver);
}

static void __exit etherh_exit(void)
{
 ecard_remove_driver(ðerh_driver);
}

module_init(etherh_init);
module_exit(etherh_exit);

Messung V0.5
C=95 H=93 G=93

¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.2Angebot  Wie Sie bei der Firma Beratungs- und Dienstleistungen beauftragen können  ¤

*Eine klare Vorstellung vom Zielzustand






Versionsinformation zu Columbo

Bemerkung:

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Anfrage:

Dauer der Verarbeitung:

Sekunden

sprechenden Kalenders