Quelle  sdview3.cxx   Sprache: C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <View.hxx>
#include <com/sun/star/embed/XEmbedObjectClipboardCreator.hpp>
#include <com/sun/star/embed/NoVisualAreaSizeException.hpp>
#include <com/sun/star/embed/MSOLEObjectSystemCreator.hpp>
#include <com/sun/star/lang/XComponent.hpp>
#include <sot/filelist.hxx>
#include <editeng/editdata.hxx>
#include <svx/xfillit0.hxx>
#include <svx/xflclit.hxx>
#include <svx/xlnclit.hxx>
#include <svx/svdpagv.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/mieclip.hxx>
#include <svx/svdoole2.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdundo.hxx>
#include <svl/itempool.hxx>
#include <sot/formats.hxx>
#include <editeng/outliner.hxx>
#include <svx/obj3d.hxx>
#include <svx/e3dundo.hxx>
#include <svx/unomodel.hxx>
#include <svx/ImageMapInfo.hxx>
#include <unotools/streamwrap.hxx>
#include <vcl/graph.hxx>
#include <vcl/metaact.hxx>
#include <vcl/pdfread.hxx>
#include <vcl/TypeSerializer.hxx>
#include <svx/svxids.hrc>
#include <toolkit/helper/vclunohelper.hxx>
#include <svtools/embedhlp.hxx>
#include <osl/diagnose.h>
#include <DrawDocShell.hxx>
#include <fupoor.hxx>
#include <tablefunction.hxx>
#include <Window.hxx>
#include <sdxfer.hxx>
#include <sdpage.hxx>
#include <drawdoc.hxx>
#include <sdmod.hxx>
#include <sdresid.hxx>
#include <strings.hrc>
#include <NotesPanelViewShell.hxx>
#include <SlideSorterViewShell.hxx>
#include <unomodel.hxx>
#include <ViewClipboard.hxx>
#include <sfx2/ipclient.hxx>
#include <sfx2/classificationhelper.hxx>
#include <comphelper/scopeguard.hxx>
#include <comphelper/sequenceashashmap.hxx>
#include <comphelper/storagehelper.hxx>
#include <comphelper/processfactory.hxx>
#include <svx/sdrhittesthelper.hxx>
#include <svx/xbtmpit.hxx>
#include <memory>
#include <SlideSorter.hxx>
#include <controller/SlideSorterController.hxx>
#include <controller/SlsClipboard.hxx>

using namespace ::com::sun::star;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::io;
using namespace ::com::sun::star::datatransfer;

namespace sd {

/*************************************************************************
|*
|* Paste
|*
\************************************************************************/

namespace {

struct ImpRememberOrigAndClone
{
    SdrObject*      pOrig;
    SdrObject*      pClone;
};

}

static SdrObject* ImpGetClone(std::vector<ImpRememberOrigAndClone>& aConnectorContainer, SdrObject const * pConnObj)
{
    for(const ImpRememberOrigAndClone& rImp : aConnectorContainer)
    {
        if(pConnObj == rImp.pOrig)
            return rImp.pClone;
    }
    return nullptr;
}

// restrict movement to WorkArea
static void ImpCheckInsertPos(Point& rPos, const Size& rSize, const ::tools::Rectangle& rWorkArea)
{
    if(rWorkArea.IsEmpty())
        return;

    ::tools::Rectangle aMarkRect(Point(rPos.X() - (rSize.Width() / 2), rPos.Y() - (rSize.Height() / 2)), rSize);

    if(aMarkRect.Contains(rWorkArea))
        return;

    if(aMarkRect.Left() < rWorkArea.Left())
    {
        rPos.AdjustX(rWorkArea.Left() - aMarkRect.Left() );
    }

    if(aMarkRect.Right() > rWorkArea.Right())
    {
        rPos.AdjustX( -(aMarkRect.Right() - rWorkArea.Right()) );
    }

    if(aMarkRect.Top() < rWorkArea.Top())
    {
        rPos.AdjustY(rWorkArea.Top() - aMarkRect.Top() );
    }

    if(aMarkRect.Bottom() > rWorkArea.Bottom())
    {
        rPos.AdjustY( -(aMarkRect.Bottom() - rWorkArea.Bottom()) );
    }
}

bool View::InsertMetaFile( const TransferableDataHelper& rDataHelper, const Point&&nbsp;rPos, ImageMap const * pImageMap, bool bOptimize )
{
    GDIMetaFile aMtf;

    if( !rDataHelper.GetGDIMetaFile( SotClipboardFormatId::GDIMETAFILE, aMtf ) )
        return false;

    bool bVector = false;
    Graphic aGraphic;

    // check if metafile only contains a pixel image, if so insert a bitmap instead
    if( bOptimize )
    {
        MetaAction* pAction = aMtf.FirstAction();
        while( pAction && !bVector )
        {
            switch( pAction->GetType() )
            {
                case MetaActionType::POINT:
                case MetaActionType::LINE:
                case MetaActionType::RECT:
                case MetaActionType::ROUNDRECT:
                case MetaActionType::ELLIPSE:
                case MetaActionType::ARC:
                case MetaActionType::PIE:
                case MetaActionType::CHORD:
                case MetaActionType::POLYLINE:
                case MetaActionType::POLYGON:
                case MetaActionType::POLYPOLYGON:
                case MetaActionType::TEXT:
                case MetaActionType::TEXTARRAY:
                case MetaActionType::STRETCHTEXT:
                case MetaActionType::TEXTRECT:
                case MetaActionType::GRADIENT:
                case MetaActionType::HATCH:
                case MetaActionType::WALLPAPER:
                case MetaActionType::EPS:
                case MetaActionType::TEXTLINE:
                case MetaActionType::FLOATTRANSPARENT:
                case MetaActionType::GRADIENTEX:
                case MetaActionType::BMPSCALEPART:
                case MetaActionType::BMPEXSCALEPART:
                    bVector = true;
                    break;
                case MetaActionType::BMP:
                case MetaActionType::BMPSCALE:
                case MetaActionType::BMPEX:
                case MetaActionType::BMPEXSCALE:
                    if( aGraphic.GetType() != GraphicType::NONE )
                    {
                        bVector = true;
                    }
                    else switch( pAction->GetType() )
                    {
                        case MetaActionType::BMP:
                            {
                                MetaBmpAction* pBmpAction = dynamic_cast< MetaBmpAction* >( pAction );
                                if( pBmpAction )
                                    aGraphic = Graphic(BitmapEx(pBmpAction->GetBitmap()));
                            }
                            break;
                        case MetaActionType::BMPSCALE:
                            {
                                MetaBmpScaleAction* pBmpScaleAction = dynamic_cast< MetaBmpScaleAction* >( pAction );
                                if( pBmpScaleAction )
                                    aGraphic = Graphic(BitmapEx(pBmpScaleAction->GetBitmap()));
                            }
                            break;
                        case MetaActionType::BMPEX:
                            {
                                MetaBmpExAction* pBmpExAction = dynamic_cast< MetaBmpExAction* >( pAction );
                                if( pBmpExAction )
                                    aGraphic = Graphic(pBmpExAction->GetBitmapEx() );
                            }
                            break;
                        case MetaActionType::BMPEXSCALE:
                            {
                                MetaBmpExScaleAction* pBmpExScaleAction = dynamic_cast< MetaBmpExScaleAction* >( pAction );
                                if( pBmpExScaleAction )
                                    aGraphic = Graphic( pBmpExScaleAction->GetBitmapEx() );
                            }
                            break;
                        default: break;
                    }
                    break;
                default: break;
            }

            pAction = aMtf.NextAction();
        }
    }

    // it is not a vector metafile but it also has no graphic?
    if( !bVector && (aGraphic.GetType() == GraphicType::NONE) )
        bVector = true;

    // restrict movement to WorkArea
    Point aInsertPos( rPos );
    Size aImageSize = bVector ? aMtf.GetPrefSize() : aGraphic.GetSizePixel();
    ImpCheckInsertPos(aInsertPos, aImageSize, GetWorkArea());

    if( bVector )
        aGraphic = Graphic( aMtf );

    aGraphic.SetPrefMapMode( aMtf.GetPrefMapMode() );
    aGraphic.SetPrefSize( aMtf.GetPrefSize() );
    InsertGraphic( aGraphic, mnAction, aInsertPos, nullptr, pImageMap );

    return true;
}

bool View::InsertData( const TransferableDataHelper& rDataHelper,
                         const Point& rPos, sal_Int8& rDnDAction, bool bDrag,
                         SotClipboardFormatId nFormat, sal_uInt16 nPage, SdrLayerID nLayer )
{
    maDropPos = rPos;
    mnAction = rDnDAction;
    mbIsDropAllowed = false;

    bool                    bLink = ( ( mnAction & DND_ACTION_LINK ) != 0 );
    bool                    bCopy = ( ( ( mnAction & DND_ACTION_COPY ) != 0 ) || bLink );
    SdrInsertFlags          nPasteOptions = SdrInsertFlags::SETDEFLAYER;

    if (mpViewSh != nullptr)
    {
        OSL_ASSERT (mpViewSh->GetViewShell()!=nullptr);
        SfxInPlaceClient* pIpClient = mpViewSh->GetViewShell()->GetIPClient();
        if( dynamic_cast< ::sd::slidesorter::SlideSorterViewShell *>( mpViewSh ) !=  nullptr
            || (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive()))
            nPasteOptions |= SdrInsertFlags::DONTMARK;
    }

    SdrObject* pPickObj = nullptr;
    if( bDrag )
    {
        SdrPageView* pPV = nullptr;
        pPickObj = PickObj(rPos, getHitTolLog(), pPV);
    }

    SdPage* pPage = nullptr;
    if( nPage != SDRPAGE_NOTFOUND )
        pPage = static_cast<SdPage*>( mrDoc.GetPage( nPage ) );

    SdTransferable* pOwnData = nullptr;
    SdTransferable* pImplementation = SdTransferable::getImplementation( rDataHelper.GetTransferable() );

    if(pImplementation && (rDnDAction & DND_ACTION_LINK))
    {
        // suppress own data when it's intention is to use it as fill information
        pImplementation = nullptr;
    }

    bool bSelfDND = false;

    // try to get own transfer data
    if( pImplementation )
    {
        SdModule* mod = SdModule::get();
        if (mod->pTransferClip == pImplementation)
            pOwnData = mod->pTransferClip;
        else if (mod->pTransferDrag == pImplementation)
        {
            pOwnData = mod->pTransferDrag;
            bSelfDND = true;
        }
        else if (mod->pTransferSelection == pImplementation)
            pOwnData = mod->pTransferSelection;
    }

    const bool bGroupUndoFromDragWithDrop = bSelfDND && mpDragSrcMarkList && IsUndoEnabled();
    if (bGroupUndoFromDragWithDrop)
    {
        OUString aStr(SdResId(STR_UNDO_DRAGDROP));
        BegUndo(aStr + " " + mpDragSrcMarkList->GetMarkDescription());
    }

    // ImageMap?
    std::unique_ptr<ImageMap> pImageMap;
    if (!pOwnData && rDataHelper.HasFormat(SotClipboardFormatId::SVIM))
    {
        if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream( SotClipboardFormatId::SVIM ) )
        {
            pImageMap.reset(new ImageMap);
            // mba: clipboard always must contain absolute URLs (could be from alien source)
            pImageMap->Read( *xStm );
        }
    }

    bool bTable = false;
    // check special cases for pasting table formats as RTL
    if( !bLink && (nFormat == SotClipboardFormatId::NONE || (nFormat == SotClipboardFormatId::RTF) || (nFormat == SotClipboardFormatId::RICHTEXT)) )
    {
        // if the object supports rtf and there is a table involved, default is to create a table
        bool bIsRTF = rDataHelper.HasFormat(SotClipboardFormatId::RTF);
        if( ( bIsRTF || rDataHelper.HasFormat( SotClipboardFormatId::RICHTEXT ) )
            && ! rDataHelper.HasFormat( SotClipboardFormatId::DRAWING ) )
        {
            auto nFormatId = bIsRTF ? SotClipboardFormatId::RTF : SotClipboardFormatId::RICHTEXT;
            if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream(nFormatId))
            {
                xStm->Seek( 0 );

                OStringBuffer aLine;
                while (xStm->ReadLine(aLine))
                {
                    size_t x = std::string_view(aLine).find( "\\trowd" );
                    if (x != std::string_view::npos)
                    {
                        bTable = true;
                        nFormat = bIsRTF ? SotClipboardFormatId::RTF : SotClipboardFormatId::RICHTEXT;
                        break;
                    }
                }
            }
        }
    }

    comphelper::ScopeGuard cleanupGuard(
        [this, &rDnDAction, bGroupUndoFromDragWithDrop]
        {
            MarkListHasChanged();
            mbIsDropAllowed = true;
            rDnDAction = mnAction;

            if (bGroupUndoFromDragWithDrop)
            {
                // this is called eventually by the underlying toolkit anyway in the case of a self-dnd
                // but we call it early in this case to group its undo actions into this open dnd undo group
                // and rely on that repeated calls to View::DragFinished are safe to do
                DragFinished(mnAction);
                EndUndo();
            }
        });

    auto ShouldTry = [nFormat, &rDataHelper](SotClipboardFormatId _def_Type)
    {
        return (nFormat == _def_Type || nFormat == SotClipboardFormatId::NONE)
               && rDataHelper.HasFormat(_def_Type);
    };

    if (pOwnData)
    {
        // Paste only if SfxClassificationHelper recommends so.
        const SfxObjectShellRef& pSource = pOwnData->GetDocShell();
        SfxObjectShell* pDestination = mrDoc.GetDocSh();
        if (pSource.is() && pDestination)
        {
            SfxClassificationCheckPasteResult eResult = SfxClassificationHelper::CheckPaste(pSource->getDocProperties(), pDestination->getDocProperties());
            if (!SfxClassificationHelper::ShowPasteInfo(eResult))
                return true;
        }
    }

    if (pOwnData && nFormat == SotClipboardFormatId::NONE)
    {
        const View* pSourceView = pOwnData->GetView();

        if( pOwnData->GetDocShell().is() && pOwnData->IsPageTransferable() )
        {
            mpClipboard->HandlePageDrop (*pOwnData);
            return true;
        }
        else if( pSourceView )
        {
            if( pSourceView == this )
            {
                // same view
                if( nLayer != SDRLAYER_NOTFOUND )
                {
                    // drop on layer tab bar
                    SdrLayerAdmin&  rLayerAdmin = mrDoc.GetLayerAdmin();
                    SdrLayer*       pLayer = rLayerAdmin.GetLayerPerID( nLayer );
                    SdrPageView*    pPV = GetSdrPageView();
                    OUString        aLayer = pLayer->GetName();

                    if( !pPV->IsLayerLocked( aLayer ) )
                    {
                        pOwnData->SetInternalMove( true );
                        const SdrMarkList& rMarkList = GetMarkedObjectList();
                        rMarkList.ForceSort();

                        for( size_t nM = 0; nM < rMarkList.GetMarkCount(); ++nM )
                        {
                            SdrMark*    pM = rMarkList.GetMark( nM );
                            SdrObject*  pO = pM->GetMarkedSdrObj();

                            if( pO )
                            {
                                // #i11702#
                                if( IsUndoEnabled() )
                                {
                                    BegUndo(SdResId(STR_MODIFYLAYER));
                                    AddUndo(GetModel().GetSdrUndoFactory().CreateUndoObjectLayerChange(*pO, pO->GetLayer(), nLayer));
                                    EndUndo();
                                }

                                pO->SetLayer( nLayer );
                            }
                        }

                        return true;
                    }
                }
                else
                {
                    SdrPageView*    pPV = GetSdrPageView();
                    bool            bDropOnTabBar = true;

                    if( !pPage && pPV->GetPage()->GetPageNum() != mnDragSrcPgNum )
                    {
                        pPage = static_cast<SdPage*>( pPV->GetPage() );
                        bDropOnTabBar = false;
                    }

                    if( pPage )
                    {
                        // drop on other page
                        OUString aActiveLayer = GetActiveLayer();

                        if( !pPV->IsLayerLocked( aActiveLayer ) )
                        {
                            if( !IsPresObjSelected() )
                            {
                                SdrMarkList* pMarkList;

                                if( (mnDragSrcPgNum != SDRPAGE_NOTFOUND) && (mnDragSrcPgNum != pPV->GetPage()->GetPageNum()) )
                                {
                                    pMarkList = mpDragSrcMarkList.get();
                                }
                                else
                                {
                                    // actual mark list is used
                                    pMarkList = new SdrMarkList( GetMarkedObjectList());
                                }

                                pMarkList->ForceSort();

                                // stuff to remember originals and clones
                                std::vector<ImpRememberOrigAndClone> aConnectorContainer;
                                size_t nConnectorCount = 0;
                                Point       aCurPos;

                                // calculate real position of current
                                // source objects, if necessary (#103207)
                                if (pOwnData == SdModule::get()->pTransferSelection)
                                {
                                    ::tools::Rectangle aCurBoundRect;

                                    if( pMarkList->TakeBoundRect( pPV, aCurBoundRect ) )
                                        aCurPos = aCurBoundRect.TopLeft();
                                    else
                                        aCurPos = pOwnData->GetStartPos();
                                }
                                else
                                    aCurPos = pOwnData->GetStartPos();

                                const Size aVector( maDropPos.X() - aCurPos.X(), maDropPos.Y() - aCurPos.Y() );

                                std::unordered_set<rtl::OUString> aNameSet;
                                for(size_t a = 0; a < pMarkList->GetMarkCount(); ++a)
                                {
                                    SdrMark* pM = pMarkList->GetMark(a);
                                    rtl::Reference<SdrObject> pObj(pM->GetMarkedSdrObj()->CloneSdrObject(pPage->getSdrModelFromSdrPage()));

                                    if(pObj)
                                    {
                                        if(!bDropOnTabBar)
                                        {
                                            // do a NbcMove(...) instead of setting SnapRects here
                                            pObj->NbcMove(aVector);
                                        }

                                        SdrObject* pMarkParent = pM->GetMarkedSdrObj()->getParentSdrObjectFromSdrObject();
                                        if (bCopy || (pMarkParent && pMarkParent->IsGroupObject()))
                                            pPage->InsertObjectThenMakeNameUnique(pObj.get(), aNameSet);
                                        else
                                            pPage->InsertObject(pObj.get());

                                        if( IsUndoEnabled() )
                                        {
                                            BegUndo(SdResId(STR_UNDO_DRAGDROP));
                                            AddUndo(GetModel().GetSdrUndoFactory().CreateUndoNewObject(*pObj));
                                            EndUndo();
                                        }

                                        ImpRememberOrigAndClone aRem;
                                        aRem.pOrig = pM->GetMarkedSdrObj();
                                        aRem.pClone = pObj.get();
                                        aConnectorContainer.push_back(aRem);

                                        if(dynamic_cast< SdrEdgeObj *>( pObj.get() ) !=  nullptr)
                                            nConnectorCount++;
                                    }
                                }

                                // try to re-establish connections at clones
                                if(nConnectorCount)
                                {
                                    for(size_t a = 0; a < aConnectorContainer.size(); ++a)
                                    {
                                        ImpRememberOrigAndClone* pRem = &aConnectorContainer[a];

                                        if(auto pCloneEdge = dynamic_cast<SdrEdgeObj *>( pRem->pClone ))
                                        {
                                            SdrEdgeObj* pOrigEdge = static_cast<SdrEdgeObj*>(pRem->pOrig);

                                            // test first connection
                                            SdrObjConnection& rConn0 = pOrigEdge->GetConnection(false);
                                            SdrObject* pConnObj = rConn0.GetSdrObject();
                                            if(pConnObj)
                                            {
                                                SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj);
                                                if(pConnClone)
                                                {
                                                    // if dest obj was cloned, too, re-establish connection
                                                    pCloneEdge->ConnectToNode(false, pConnClone);
                                                    pCloneEdge->GetConnection(false).SetConnectorId(rConn0.GetConnectorId());
                                                }
                                                else
                                                {
                                                    // set position of connection point of original connected object
                                                    const SdrGluePointList* pGlueList = pConnObj->GetGluePointList();
                                                    if(pGlueList)
                                                    {
                                                        sal_uInt16 nInd = pGlueList->FindGluePoint(rConn0.GetConnectorId());

                                                        if(SDRGLUEPOINT_NOTFOUND != nInd)
                                                        {
                                                            const SdrGluePoint& rGluePoint = (*pGlueList)[nInd];
                                                            Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj);
                                                            aPosition.AdjustX(aVector.Width() );
                                                            aPosition.AdjustY(aVector.Height() );
                                                            pCloneEdge->SetTailPoint(false, aPosition);
                                                        }
                                                    }
                                                }
                                            }

                                            // test second connection
                                            SdrObjConnection& rConn1 = pOrigEdge->GetConnection(true);
                                            pConnObj = rConn1.GetSdrObject();
                                            if(pConnObj)
                                            {
                                                SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj);
                                                if(pConnClone)
                                                {
                                                    // if dest obj was cloned, too, re-establish connection
                                                    pCloneEdge->ConnectToNode(true, pConnClone);
                                                    pCloneEdge->GetConnection(true).SetConnectorId(rConn1.GetConnectorId());
                                                }
                                                else
                                                {
                                                    // set position of connection point of original connected object
                                                    const SdrGluePointList* pGlueList = pConnObj->GetGluePointList();
                                                    if(pGlueList)
                                                    {
                                                        sal_uInt16 nInd = pGlueList->FindGluePoint(rConn1.GetConnectorId());

                                                        if(SDRGLUEPOINT_NOTFOUND != nInd)
                                                        {
                                                            const SdrGluePoint& rGluePoint = (*pGlueList)[nInd];
                                                            Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj);
                                                            aPosition.AdjustX(aVector.Width() );
                                                            aPosition.AdjustY(aVector.Height() );
                                                            pCloneEdge->SetTailPoint(true, aPosition);
                                                        }
                                                    }
                                                }
                                            }
                                        }
                                    }
                                }

                                if( pMarkList != mpDragSrcMarkList.get() )
                                    delete pMarkList;

                                return true;
                            }
                            else
                            {
                                maDropErrorIdle.Start();
                            }
                        }
                    }
                    else
                    {
                        pOwnData->SetInternalMove( true );
                        MoveAllMarked( Size( maDropPos.X() - pOwnData->GetStartPos().X(),
                                             maDropPos.Y() - pOwnData->GetStartPos().Y() ), bCopy );
                        return true;
                    }
                }
            }
            else
            {
                // different views
                if( !pSourceView->IsPresObjSelected() )
                {
                    // model is owned by from AllocModel() created DocShell
                    SdDrawDocument* pSourceDoc = static_cast<SdDrawDocument*>(&pSourceView->GetModel());
                    pSourceDoc->CreatingDataObj( pOwnData );
                    SdDrawDocument* pModel = static_cast<SdDrawDocument*>( pSourceView->CreateMarkedObjModel().release() );
                    bool bReturn = Paste(*pModel, maDropPos, pPage, nPasteOptions);

                    if( !pPage )
                        pPage = static_cast<SdPage*>( GetSdrPageView()->GetPage() );

                    OUString aLayout = pPage->GetLayoutName();
                    sal_Int32 nPos = aLayout.indexOf(SD_LT_SEPARATOR);
                    if (nPos != -1)
                        aLayout = aLayout.copy(0, nPos);
                    pPage->SetPresentationLayout( aLayout, false, false );
                    pSourceDoc->CreatingDataObj( nullptr );
                    if (bReturn)
                        return true;
                }
                else
                {
                    maDropErrorIdle.Start();
                }
            }
        }
        else
        {
            SdDrawDocument* pWorkModel = const_cast<SdDrawDocument*>(pOwnData->GetWorkDocument());
            SdPage*         pWorkPage = pWorkModel->GetSdPage( 0, PageKind::Standard );

            pWorkPage->SetSdrObjListRectsDirty();

            // tdf#118171 - snap rectangles of objects without line width
            const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

            maDropPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
            maDropPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );

            // delete pages, that are not of any interest for us
            for( ::tools::Long i = pWorkModel->GetPageCount() - 1; i >= 0; i-- )
            {
                SdPage* pP = static_cast< SdPage* >( pWorkModel->GetPage( static_cast<sal_uInt16>(i) ) );

                if( pP->GetPageKind() != PageKind::Standard )
                    pWorkModel->DeletePage( static_cast<sal_uInt16>(i) );
            }

            bool bReturn = Paste(*pWorkModel, maDropPos, pPage, nPasteOptions);

            if( !pPage )
                pPage = static_cast<SdPage*>( GetSdrPageView()->GetPage() );

            OUString aLayout = pPage->GetLayoutName();
            sal_Int32 nPos = aLayout.indexOf(SD_LT_SEPARATOR);
            if (nPos != -1)
                aLayout = aLayout.copy(0, nPos);
            pPage->SetPresentationLayout( aLayout, false, false );
            if (bReturn)
                return true;
        }
    }

    if (ShouldTry(SotClipboardFormatId::PDF))
    {
        if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream( SotClipboardFormatId::PDF ))
        {
            Point aInsertPos(rPos);
            Graphic aGraphic;
            if (vcl::ImportPDF(*xStm, aGraphic))
            {
                const sal_uInt64 nGraphicContentSize(xStm->Tell());
                xStm->Seek(0);
                BinaryDataContainer aGraphicContent(*xStm, nGraphicContentSize);
                aGraphic.SetGfxLink(std::make_shared<GfxLink>(aGraphicContent, GfxLinkType::NativePdf));

                InsertGraphic(aGraphic, mnAction, aInsertPos, nullptr, nullptr);
                return true;
            }
        }
    }

    if (ShouldTry(SotClipboardFormatId::EMBED_SOURCE))
    {
        if (::sd::slidesorter::SlideSorterViewShell* pSlideSorterViewShell =
                ::sd::slidesorter::SlideSorterViewShell::GetSlideSorter(
                    mrDoc.GetDocSh()->GetViewShell()->GetViewShellBase()))
        {
            if (pSlideSorterViewShell->GetSlideSorter().GetController().GetClipboard().PasteSlidesFromSystemClipboard())
                return true;
        }
    }

    if (ShouldTry(SotClipboardFormatId::DRAWING))
    {
        if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream( SotClipboardFormatId::DRAWING ))
        {
            DrawDocShellRef xShell = new DrawDocShell(SfxObjectCreateMode::INTERNAL, false, DocumentType::Impress);
            xShell->DoInitNew();

            SdDrawDocument* pModel = xShell->GetDoc();
            pModel->InsertPage(pModel->AllocPage(false).get());

            Reference< XComponent > xComponent = xShell->GetModel();
            xStm->Seek( 0 );

            css::uno::Reference< css::io::XInputStream > xInputStream( new utl::OInputStreamWrapper( *xStm ) );
            bool bReturn = SvxDrawingLayerImport( pModel, xInputStream, xComponent, "com.sun.star.comp.Impress.XMLOasisImporter" );

            if( pModel->GetPageCount() == 0 )
            {
                OSL_FAIL("empty or invalid drawing xml document on clipboard!" );
            }
            else
            {
                bool bChanged = false;

                if (bReturn && (mnAction & (DND_ACTION_MOVE | DND_ACTION_LINK)))
                {
                    if( pModel->GetSdPage( 0, PageKind::Standard )->GetObjCount() == 1 )
                    {
                        // only one object
                        SdrObject*      pObj = pModel->GetSdPage( 0, PageKind::Standard )->GetObj( 0 );
                        SdrPageView*    pPV = nullptr;
                        SdrObject* pPickObj2 = PickObj(rPos, getHitTolLog(), pPV);

                        if( ( mnAction & DND_ACTION_MOVE ) && pPickObj2 && pObj )
                        {
                            // replace object
                            SdrPage* pWorkPage = GetSdrPageView()->GetPage();
                            rtl::Reference<SdrObject> pNewObj(pObj->CloneSdrObject(pWorkPage->getSdrModelFromSdrPage()));
                            ::tools::Rectangle   aPickObjRect( pPickObj2->GetCurrentBoundRect() );
                            Size        aPickObjSize( aPickObjRect.GetSize() );
                            Point       aVec( aPickObjRect.TopLeft() );
                            ::tools::Rectangle   aObjRect( pNewObj->GetCurrentBoundRect() );
                            Size        aObjSize( aObjRect.GetSize() );

                            Fraction aScaleWidth( aPickObjSize.Width(), aObjSize.Width() );
                            Fraction aScaleHeight( aPickObjSize.Height(), aObjSize.Height() );
                            pNewObj->NbcResize( aObjRect.TopLeft(), aScaleWidth, aScaleHeight );

                            aVec -= aObjRect.TopLeft();
                            pNewObj->NbcMove( Size( aVec.X(), aVec.Y() ) );

                            const bool bUndo = IsUndoEnabled();

                            if( bUndo )
                                BegUndo(SdResId(STR_UNDO_DRAGDROP));
                            pNewObj->NbcSetLayer( pPickObj2->GetLayer() );
                            pWorkPage->InsertObject( pNewObj.get() );
                            if( bUndo )
                            {
                                AddUndo( mrDoc.GetSdrUndoFactory().CreateUndoNewObject( *pNewObj ) );
                                AddUndo( mrDoc.GetSdrUndoFactory().CreateUndoDeleteObject( *pPickObj2 ) );
                            }
                            pWorkPage->RemoveObject( pPickObj2->GetOrdNum() );

                            if( bUndo )
                            {
                                EndUndo();
                            }

                            bChanged = true;
                            mnAction = DND_ACTION_COPY;
                        }
                        else if( ( mnAction & DND_ACTION_LINK ) && pPickObj2 && pObj &&
                            dynamic_cast< const SdrGrafObj *>( pPickObj2 ) ==  nullptr &&
                                dynamic_cast< const SdrOle2Obj *>( pPickObj2 ) ==  nullptr )
                        {
                            SfxItemSet aSet( mrDoc.GetPool() );

                            // set new attributes to object
                            const bool bUndo = IsUndoEnabled();
                            if( bUndo )
                            {
                                BegUndo( SdResId(STR_UNDO_DRAGDROP) );
                                AddUndo( mrDoc.GetSdrUndoFactory().CreateUndoAttrObject( *pPickObj2 ) );
                            }

                            aSet.Put( pObj->GetMergedItemSet() );

                            /* Do not take over corner radius. There are
                               gradients (rectangles) in the gallery with corner
                               radius of 0. We should not use that on the
                               object. */
                            aSet.ClearItem( SDRATTR_CORNER_RADIUS );

                            const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);

                            if(pSdrGrafObj)
                            {
                                // If we have a graphic as source object, use its graphic
                                // content as fill style
                                aSet.Put(XFillStyleItem(drawing::FillStyle_BITMAP));
                                aSet.Put(XFillBitmapItem(pSdrGrafObj->GetGraphic()));
                            }

                            pPickObj2->SetMergedItemSetAndBroadcast( aSet );

                            if( DynCastE3dObject( pPickObj2 ) && DynCastE3dObject( pObj ) )
                            {
                                // handle 3D attribute in addition
                                SfxItemSetFixed<SID_ATTR_3D_START, SID_ATTR_3D_END> aNewSet( mrDoc.GetPool() );
                                SfxItemSetFixed<SID_ATTR_3D_START, SID_ATTR_3D_END> aOldSet( mrDoc.GetPool() );

                                aOldSet.Put(pPickObj2->GetMergedItemSet());
                                aNewSet.Put( pObj->GetMergedItemSet() );

                                if( bUndo )
                                    AddUndo(
                                        std::make_unique<E3dAttributesUndoAction>(
                                            *static_cast< E3dObject* >(pPickObj2),
                                            aNewSet,
                                            aOldSet));
                                pPickObj2->SetMergedItemSetAndBroadcast( aNewSet );
                            }

                            if( bUndo )
                                EndUndo();
                            bChanged = true;
                        }
                    }
                }

                if( !bChanged )
                {
                    SdrPage* pWorkPage = pModel->GetSdPage( 0, PageKind::Standard );

                    pWorkPage->SetSdrObjListRectsDirty();

                    if( pOwnData )
                    {
                        // tdf#118171 - snap rectangles of objects without line width
                        const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

                        maDropPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
                        maDropPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );
                    }

                    bReturn = Paste(*pModel, maDropPos, pPage, nPasteOptions);
                }

                xShell->DoClose();
            }
            if (bReturn)
                return true;
        }
    }

    if (ShouldTry(SotClipboardFormatId::SBA_FIELDDATAEXCHANGE))
    {
        OUString aOUString;

        if (rDataHelper.GetString(SotClipboardFormatId::SBA_FIELDDATAEXCHANGE, aOUString))
        {
            rtl::Reference<SdrObject> pObj = CreateFieldControl( aOUString );

            if( pObj )
            {
                ::tools::Rectangle   aRect( pObj->GetLogicRect() );
                Size        aSize( aRect.GetSize() );

                maDropPos.AdjustX( -( aSize.Width() >> 1 ) );
                maDropPos.AdjustY( -( aSize.Height() >> 1 ) );

                aRect.SetPos( maDropPos );
                pObj->SetLogicRect( aRect );
                InsertObjectAtView( pObj.get(), *GetSdrPageView(), SdrInsertFlags::SETDEFLAYER );
                return true;
            }
        }
    }

    if (!bLink &&
        (ShouldTry(SotClipboardFormatId::EMBED_SOURCE) || ShouldTry(SotClipboardFormatId::EMBEDDED_OBJ))  &&
        rDataHelper.HasFormat(SotClipboardFormatId::OBJECTDESCRIPTOR))
    {
        //TODO/LATER: is it possible that this format is binary?! (from old versions of SO)
        uno::Reference < io::XInputStream > xStm;
        TransferableObjectDescriptor    aObjDesc;

        if (rDataHelper.GetTransferableObjectDescriptor(SotClipboardFormatId::OBJECTDESCRIPTOR, aObjDesc))
        {
            OUString aDocShellID = SfxObjectShell::CreateShellID(mrDoc.GetDocSh());
            xStm = rDataHelper.GetInputStream(nFormat != SotClipboardFormatId::NONE ? nFormat : SotClipboardFormatId::EMBED_SOURCE, aDocShellID);
            if (!xStm.is())
                xStm = rDataHelper.GetInputStream(SotClipboardFormatId::EMBEDDED_OBJ, aDocShellID);
        }

        if (xStm.is())
        {
            if( mrDoc.GetDocSh() && ( mrDoc.GetDocSh()->GetClassName() == aObjDesc.maClassName ) )
            {
                bool bReturn = false;
                uno::Reference < embed::XStorage > xStore( ::comphelper::OStorageHelper::GetStorageFromInputStream( xStm ) );
                ::sd::DrawDocShellRef xDocShRef( new ::sd::DrawDocShell( SfxObjectCreateMode::EMBEDDED, true, mrDoc.GetDocumentType() ) );

                // mba: BaseURL doesn't make sense for clipboard functionality
                SfxMedium *pMedium = new SfxMedium( xStore, OUString() );
                if( xDocShRef->DoLoad( pMedium ) )
                {
                    SdDrawDocument* pModel = xDocShRef->GetDoc();
                    SdPage*         pWorkPage = pModel->GetSdPage( 0, PageKind::Standard );

                    pWorkPage->SetSdrObjListRectsDirty();

                    if( pOwnData )
                    {
                        // tdf#118171 - snap rectangles of objects without line width
                        const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

                        maDropPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
                        maDropPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );
                    }

                    // delete pages, that are not of any interest for us
                    for( ::tools::Long i = pModel->GetPageCount() - 1; i >= 0; i-- )
                    {
                        SdPage* pP = static_cast< SdPage* >( pModel->GetPage( static_cast<sal_uInt16>(i) ) );

                        if( pP->GetPageKind() != PageKind::Standard )
                            pModel->DeletePage( static_cast<sal_uInt16>(i) );
                    }

                    bReturn = Paste(*pModel, maDropPos, pPage, nPasteOptions);

                    if( !pPage )
                        pPage = static_cast<SdPage*>(GetSdrPageView()->GetPage());

                    OUString aLayout = pPage->GetLayoutName();
                    sal_Int32 nPos = aLayout.indexOf(SD_LT_SEPARATOR);
                    if (nPos != -1)
                        aLayout = aLayout.copy(0, nPos);
                    pPage->SetPresentationLayout( aLayout, false, false );
                }

                xDocShRef->DoClose();
                xDocShRef.clear();
                if (bReturn)
                    return true;
            }
            else
            {
                OUString aName;
                uno::Reference < embed::XEmbeddedObject > xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName );
                if ( xObj.is() )
                {
                    svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect );

                    Size aSize;
                    if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON )
                    {
                        if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
                            aSize = aObjDesc.maSize;
                        else
                        {
                            MapMode aMapMode( MapUnit::Map100thMM );
                            aSize = aObjRef.GetSize( &aMapMode );
                        }
                    }
                    else
                    {
                        awt::Size aSz;
                        MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) );
                        if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
                        {
                            Size aTmp(OutputDevice::LogicToLogic(aObjDesc.maSize, MapMode(MapUnit::Map100thMM), MapMode(aMapUnit)));
                            aSz.Width = aTmp.Width();
                            aSz.Height = aTmp.Height();
                            xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
                        }

                        try
                        {
                            aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect );
                        }
                        catch( embed::NoVisualAreaSizeException& )
                        {
                            // if the size still was not set the default size will be set later
                        }

                        aSize = Size( aSz.Width, aSz.Height );

                        if( !aSize.Width() || !aSize.Height() )
                        {
                            aSize.setWidth( 14100 );
                            aSize.setHeight( 10000 );
                            aSize = OutputDevice::LogicToLogic(Size(14100, 10000), MapMode(MapUnit::Map100thMM), MapMode(aMapUnit));
                            aSz.Width = aSize.Width();
                            aSz.Height = aSize.Height();
                            xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
                        }

                        aSize = OutputDevice::LogicToLogic(aSize, MapMode(aMapUnit), MapMode(MapUnit::Map100thMM));
                    }

                    Size aMaxSize( mrDoc.GetMaxObjSize() );

                    maDropPos.AdjustX( -(std::min( aSize.Width(), aMaxSize.Width() ) >> 1) );
                    maDropPos.AdjustY( -(std::min( aSize.Height(), aMaxSize.Height() ) >> 1) );

                    ::tools::Rectangle       aRect( maDropPos, aSize );
                    rtl::Reference<SdrOle2Obj> pObj = new SdrOle2Obj(
                        getSdrModelFromSdrView(),
                        aObjRef,
                        aName,
                        aRect);
                    SdrPageView*    pPV = GetSdrPageView();
                    SdrInsertFlags  nOptions = SdrInsertFlags::SETDEFLAYER;

                    if (mpViewSh!=nullptr)
                    {
                        OSL_ASSERT (mpViewSh->GetViewShell()!=nullptr);
                        SfxInPlaceClient* pIpClient
                            = mpViewSh->GetViewShell()->GetIPClient();
                        if (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive())
                            nOptions |= SdrInsertFlags::DONTMARK;
                    }

                    // bInserted of false means that pObj has been deleted
                    bool bInserted = InsertObjectAtView( pObj.get(), *pPV, nOptions );

                    if (bInserted && pImageMap)
                        pObj->AppendUserData( std::unique_ptr<SdrObjUserData>(new SvxIMapInfo( *pImageMap )) );

                    if (bInserted && pObj->IsChart())
                    {
                        bool bDisableDataTableDialog = false;
                        svt::EmbeddedObjectRef::TryRunningState( xObj );
                        uno::Reference< beans::XPropertySet > xProps( xObj->getComponent(), uno::UNO_QUERY );
                        if ( xProps.is() &&
                             ( xProps->getPropertyValue( u"DisableDataTableDialog"_ustr ) >>= bDisableDataTableDialog ) &&
                             bDisableDataTableDialog )
                        {
                            xProps->setPropertyValue( u"DisableDataTableDialog"_ustr , uno::Any( false ) );
                            xProps->setPropertyValue( u"DisableComplexChartTypes"_ustr , uno::Any( false ) );
                            uno::Reference< util::XModifiable > xModifiable( xProps, uno::UNO_QUERY );
                            if ( xModifiable.is() )
                            {
                                xModifiable->setModified( true );
                            }
                        }
                    }

                    return true;
                }
            }
        }
    }

    if (!bLink &&
        (ShouldTry(SotClipboardFormatId::EMBEDDED_OBJ_OLE) || ShouldTry(SotClipboardFormatId::EMBED_SOURCE_OLE)) &&
        rDataHelper.HasFormat(SotClipboardFormatId::OBJECTDESCRIPTOR_OLE))
    {
        // online insert ole if format is forced or no gdi metafile is available
        if( (nFormat != SotClipboardFormatId::NONE) || !rDataHelper.HasFormat( SotClipboardFormatId::GDIMETAFILE ) )
        {
            uno::Reference < io::XInputStream > xStm;
            TransferableObjectDescriptor    aObjDesc;

            if ( rDataHelper.GetTransferableObjectDescriptor( SotClipboardFormatId::OBJECTDESCRIPTOR_OLE, aObjDesc ) )
            {
                uno::Reference < embed::XEmbeddedObject > xObj;
                OUString aName;

                xStm = rDataHelper.GetInputStream(nFormat != SotClipboardFormatId::NONE ? nFormat : SotClipboardFormatId::EMBED_SOURCE_OLE, OUString());
                if (!xStm.is())
                    xStm = rDataHelper.GetInputStream(SotClipboardFormatId::EMBEDDED_OBJ_OLE, OUString());

                if (xStm.is())
                {
                    xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName );
                }
                else
                {
                    try
                    {
                        uno::Reference< embed::XStorage > xTmpStor = ::comphelper::OStorageHelper::GetTemporaryStorage();
                        uno::Reference < embed::XEmbedObjectClipboardCreator > xClipboardCreator =
                            embed::MSOLEObjectSystemCreator::create( ::comphelper::getProcessComponentContext() );

                        embed::InsertedObjectInfo aInfo = xClipboardCreator->createInstanceInitFromClipboard(
                                                                xTmpStor,
                                                                u"DummyName"_ustr ,
                                                                uno::Sequence< beans::PropertyValue >() );

                        // TODO/LATER: in future InsertedObjectInfo will be used to get container related information
                        // for example whether the object should be an iconified one
                        xObj = aInfo.Object;
                        if ( xObj.is() )
                            mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xObj, aName );
                    }
                    catch( uno::Exception& )
                    {}
                }

                if ( xObj.is() )
                {
                    svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect );

                    // try to get the replacement image from the clipboard
                    Graphic aGraphic;
                    SotClipboardFormatId nGrFormat = SotClipboardFormatId::NONE;

// (for Selection Manager in Trusted Solaris)
#ifndef __sun
                    if (rDataHelper.GetGraphic(SotClipboardFormatId::SVXB, aGraphic))
                        nGrFormat = SotClipboardFormatId::SVXB;
                    else if (rDataHelper.GetGraphic(SotClipboardFormatId::GDIMETAFILE, aGraphic))
                        nGrFormat = SotClipboardFormatId::GDIMETAFILE;
                    else if (rDataHelper.GetGraphic(SotClipboardFormatId::BITMAP, aGraphic))
                        nGrFormat = SotClipboardFormatId::BITMAP;
#endif

                    // insert replacement image ( if there is one ) into the object helper
                    if ( nGrFormat != SotClipboardFormatId::NONE )
                    {
                        datatransfer::DataFlavor aDataFlavor;
                        SotExchange::GetFormatDataFlavor( nGrFormat, aDataFlavor );
                        aObjRef.SetGraphic( aGraphic, aDataFlavor.MimeType );
                    }

                    Size aSize;
                    if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON )
                    {
                        if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
                            aSize = aObjDesc.maSize;
                        else
                        {
                            MapMode aMapMode( MapUnit::Map100thMM );
                            aSize = aObjRef.GetSize( &aMapMode );
                        }
                    }
                    else
                    {
                        MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) );

                        awt::Size aSz;
                        try{
                            aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect );
                        }
                        catch( embed::NoVisualAreaSizeException& )
                        {
                            // the default size will be set later
                        }

                        if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
                        {
                            Size aTmp(OutputDevice::LogicToLogic(aObjDesc.maSize, MapMode(MapUnit::Map100thMM), MapMode(aMapUnit)));
                            if ( aSz.Width != aTmp.Width() || aSz.Height != aTmp.Height() )
                            {
                                aSz.Width = aTmp.Width();
                                aSz.Height = aTmp.Height();
                                xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
                            }
                        }

                        aSize = Size( aSz.Width, aSz.Height );

                        if( !aSize.Width() || !aSize.Height() )
                        {
                            aSize = OutputDevice::LogicToLogic(Size(14100, 10000), MapMode(MapUnit::Map100thMM), MapMode(aMapUnit));
                            aSz.Width = aSize.Width();
                            aSz.Height = aSize.Height();
                            xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
                        }

                        aSize = OutputDevice::LogicToLogic(aSize, MapMode(aMapUnit), MapMode(MapUnit::Map100thMM));
                    }

                    Size aMaxSize( mrDoc.GetMaxObjSize() );

                    maDropPos.AdjustX( -(std::min( aSize.Width(), aMaxSize.Width() ) >> 1) );
                    maDropPos.AdjustY( -(std::min( aSize.Height(), aMaxSize.Height() ) >> 1) );

                    ::tools::Rectangle       aRect( maDropPos, aSize );
                    rtl::Reference<SdrOle2Obj> pObj = new SdrOle2Obj(
                        getSdrModelFromSdrView(),
                        aObjRef,
                        aName,
                        aRect);
                    SdrPageView*    pPV = GetSdrPageView();
                    SdrInsertFlags  nOptions = SdrInsertFlags::SETDEFLAYER;

                    if (mpViewSh!=nullptr)
                    {
                        OSL_ASSERT (mpViewSh->GetViewShell()!=nullptr);
                        SfxInPlaceClient* pIpClient
                            = mpViewSh->GetViewShell()->GetIPClient();
                        if (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive())
                            nOptions |= SdrInsertFlags::DONTMARK;
                    }

                    if (InsertObjectAtView(pObj.get(), *pPV, nOptions))
                    {
                        if( pImageMap )
                            pObj->AppendUserData( std::unique_ptr<SdrObjUserData>(new SvxIMapInfo( *pImageMap )) );

                        // let the object stay in loaded state after insertion
                        pObj->Unload();
                        return true;
                    }
                }
            }
        }

        if (rDataHelper.HasFormat(SotClipboardFormatId::GDIMETAFILE))
        {
            // if no object was inserted, insert a picture
            InsertMetaFile(rDataHelper, rPos, pImageMap.get(), true);
            return true;
        }
    }

    if ((!bLink || pPickObj) && ShouldTry(SotClipboardFormatId::SVXB))
    {
        if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream( SotClipboardFormatId::SVXB ))
        {
            Point   aInsertPos( rPos );
            Graphic aGraphic;

            TypeSerializer aSerializer(*xStm);
            aSerializer.readGraphic(aGraphic);

            if( pOwnData && pOwnData->GetWorkDocument() )
            {
                const SdDrawDocument*   pWorkModel = pOwnData->GetWorkDocument();
                SdrPage*                pWorkPage = const_cast<SdrPage*>( ( pWorkModel->GetPageCount() > 1 ) ?
                                                    pWorkModel->GetSdPage( 0, PageKind::Standard ) :
                                                    pWorkModel->GetPage( 0 ) );

                pWorkPage->SetSdrObjListRectsDirty();

                // tdf#118171 - snap rectangles of objects without line width
                const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

                aInsertPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
                aInsertPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );
            }

            // restrict movement to WorkArea
            Size aImageMapSize = OutputDevice::LogicToLogic(aGraphic.GetPrefSize(),
                aGraphic.GetPrefMapMode(), MapMode(MapUnit::Map100thMM));

            ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea());

            InsertGraphic( aGraphic, mnAction, aInsertPos, nullptr, pImageMap.get() );
            return true;
        }
    }

    if ((!bLink || pPickObj) && ShouldTry(SotClipboardFormatId::GDIMETAFILE))
    {
        Point aInsertPos( rPos );

        if( pOwnData && pOwnData->GetWorkDocument() )

        {
            const SdDrawDocument*   pWorkModel = pOwnData->GetWorkDocument();
            SdrPage*                pWorkPage = const_cast<SdrPage*>( ( pWorkModel->GetPageCount() > 1 ) ?
                                                pWorkModel->GetSdPage( 0, PageKind::Standard ) :
                                                pWorkModel->GetPage( 0 ) );

            pWorkPage->SetSdrObjListRectsDirty();

            // tdf#118171 - snap rectangles of objects without line width
            const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

            aInsertPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
            aInsertPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );
        }

        if (InsertMetaFile( rDataHelper, aInsertPos, pImageMap.get(), nFormat == SotClipboardFormatId::NONE ))
            return true;
    }

    if ((!bLink || pPickObj) && ShouldTry(SotClipboardFormatId::BITMAP))
    {
        BitmapEx aBmpEx;

        // get basic Bitmap data
        rDataHelper.GetBitmapEx(SotClipboardFormatId::BITMAP, aBmpEx);

        if(aBmpEx.IsEmpty())
        {
            // if this did not work, try to get graphic formats and convert these to bitmap
            Graphic aGraphic;

            if (rDataHelper.GetGraphic(SotClipboardFormatId::GDIMETAFILE, aGraphic))
            {
                aBmpEx = aGraphic.GetBitmapEx();
            }
            else if (rDataHelper.GetGraphic(SotClipboardFormatId::SVXB, aGraphic))
            {
                aBmpEx = aGraphic.GetBitmapEx();
            }
            else if (rDataHelper.GetGraphic(SotClipboardFormatId::BITMAP, aGraphic))
            {
                aBmpEx = aGraphic.GetBitmapEx();
            }
        }

        if(!aBmpEx.IsEmpty())
        {
            Point aInsertPos( rPos );

            if( pOwnData && pOwnData->GetWorkDocument() )
            {
                const SdDrawDocument*   pWorkModel = pOwnData->GetWorkDocument();
                SdrPage*                pWorkPage = const_cast<SdrPage*>( ( pWorkModel->GetPageCount() > 1 ) ?
                                                    pWorkModel->GetSdPage( 0, PageKind::Standard ) :
                                                    pWorkModel->GetPage( 0 ) );

                pWorkPage->SetSdrObjListRectsDirty();

                // tdf#118171 - snap rectangles of objects without line width
                const Size aSize(pWorkPage->GetAllObjSnapRect().GetSize());

                aInsertPos.setX( pOwnData->GetBoundStartPos().X() + ( aSize.Width() >> 1 ) );
                aInsertPos.setY( pOwnData->GetBoundStartPos().Y() + ( aSize.Height() >> 1 ) );
            }

            // restrict movement to WorkArea
            Size aImageMapSize(aBmpEx.GetPrefSize());
            ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea());

            InsertGraphic( aBmpEx, mnAction, aInsertPos, nullptr, pImageMap.get() );
            return true;
        }
    }

    if (pPickObj && ShouldTry(SotClipboardFormatId::XFA))
    {
        uno::Any const data(rDataHelper.GetAny(SotClipboardFormatId::XFA, u""_ustr));
        uno::Sequence<beans::NamedValue> props;
        if (data >>= props)
        {
            if( IsUndoEnabled() )
            {
                BegUndo( SdResId(STR_UNDO_DRAGDROP) );
                AddUndo(GetModel().GetSdrUndoFactory().CreateUndoAttrObject(*pPickObj));
                EndUndo();
            }

            ::comphelper::SequenceAsHashMap const map(props);
            drawing::FillStyle eFill(drawing::FillStyle_BITMAP); // default to something that's ignored
            Color aColor(COL_BLACK);
            auto it = map.find(u"FillStyle"_ustr);
            if (it != map.end())
            {
                XFillStyleItem style;
                style.PutValue(it->second, 0);
                eFill = style.GetValue();
            }
            it = map.find(u"FillColor"_ustr);
            if (it != map.end())
            {
                XFillColorItem color;
                color.PutValue(it->second, 0);
                aColor = color.GetColorValue();
            }

            if( eFill == drawing::FillStyle_SOLID || eFill == drawing::FillStyle_NONE )
            {
                SfxItemSet              aSet( mrDoc.GetPool() );
                bool                    bClosed = pPickObj->IsClosedObj();
                ::sd::Window* pWin = mpViewSh->GetActiveWindow();
                double fHitLog = pWin->PixelToLogic(Size(FuPoor::HITPIX, 0 ) ).Width();
                const ::tools::Long              n2HitLog = fHitLog * 2;
                Point                   aHitPosR( rPos );
                Point                   aHitPosL( rPos );
                Point                   aHitPosT( rPos );
                Point                   aHitPosB( rPos );
                const SdrLayerIDSet*        pVisiLayer = &GetSdrPageView()->GetVisibleLayers();

                aHitPosR.AdjustX(n2HitLog );
                aHitPosL.AdjustX( -n2HitLog );
                aHitPosT.AdjustY(n2HitLog );
                aHitPosB.AdjustY( -n2HitLog );

                if( bClosed &&
                    SdrObjectPrimitiveHit(*pPickObj, aHitPosR, {fHitLog, fHitLog}, *GetSdrPageView(), pVisiLayer, false) &&
                    SdrObjectPrimitiveHit(*pPickObj, aHitPosL, {fHitLog, fHitLog}, *GetSdrPageView(), pVisiLayer, false) &&
                    SdrObjectPrimitiveHit(*pPickObj, aHitPosT, {fHitLog, fHitLog}, *GetSdrPageView(), pVisiLayer, false) &&
                    SdrObjectPrimitiveHit(*pPickObj, aHitPosB, {fHitLog, fHitLog}, *GetSdrPageView(), pVisiLayer, false) )
                {
                    // area fill
                    if(eFill == drawing::FillStyle_SOLID )
                        aSet.Put(XFillColorItem(u""_ustr, aColor));

                    aSet.Put( XFillStyleItem( eFill ) );
                }
                else
                    aSet.Put( XLineColorItem( u""_ustr, aColor ) );

                // add text color
                pPickObj->SetMergedItemSetAndBroadcast( aSet );
            }
            return true;
        }
    }

    if (!bLink && ShouldTry(SotClipboardFormatId::HTML))
    {
        if (std::unique_ptr<SvStream> xStm = rDataHelper.GetSotStorageStream( SotClipboardFormatId::HTML ))
        {
            xStm->Seek( 0 );

            OStringBuffer aLine;
            while (xStm->ReadLine(aLine))
            {
                if (std::string_view(aLine).find( "" ) != std::string_view::npos ||
                    std::string_view(aLine).find( " ) != std::string_view::npos)
                {
                    bTable = true;
                    break;
                }
            }

            xStm->Seek( 0 );
            if (bTable)
            {
                if (PasteHTMLTable(*xStm, pPage, nPasteOptions))
                    return true;
            }
            else
            {
                OutlinerView* pOLV = GetTextEditOutlinerView();

                if (pOLV)
                {
                    ::tools::Rectangle aRect(pOLV->GetOutputArea());
--> --------------------

--> maximum size reached

--> --------------------

Messung V0.5