Quelle  sc7180-trogdor-r1.dts   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Google Trogdor board device tree source
 *
 * Copyright 2020 Google LLC.
 */

/dts-v1/;

#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-clamshell.dtsi"
#include "sc7180-trogdor-rt5682i-sku.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"

/ {
 model = "Google Trogdor (rev1+)";
 compatible = "google,trogdor", "qcom,sc7180";
};

&ap_tp_i2c {
 status = "okay";
};

ap_ts_pen_1v8: &i2c4 {
 status = "okay";
 clock-frequency = <400000>;

 ap_ts: touchscreen@10 {
  compatible = "elan,ekth3500";
  reg = <0x10>;
  pinctrl-names = "default";
  pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;

  interrupt-parent = <&tlmm>;
  interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

  vcc33-supply = <&pp3300_ts>;

  reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 };
};

&panel {
 compatible = "auo,b116xa01";
};

&sdhc_2 {
 status = "okay";
};

&trackpad {
 interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
};

&usb_hub_2_x {
  vdd-supply = <&pp3300_l7c>;
};

&usb_hub_3_x {
  vdd-supply = <&pp3300_l7c>;
};

/* PINCTRL - modifications to sc7180-trogdor.dtsi */

&trackpad_int_1v8_odl {
 pins = "gpio58";
};

/* PINCTRL - board-specific pinctrl */

&tlmm {
 gpio-line-names = "ESIM_MISO",
     "ESIM_MOSI",
     "ESIM_CLK",
     "ESIM_CS_L",
     "FP_TO_AP_IRQ_L",
     "FP_RST_L",
     "AP_TP_I2C_SDA",
     "AP_TP_I2C_SCL",
     "TS_RESET_L",
     "TS_INT_L",
     "FPMCU_BOOT0",
     "EDP_BRIJ_IRQ",
     "AP_EDP_BKLTEN",
     "",
     "",
     "EDP_BRIJ_I2C_SDA",
     "EDP_BRIJ_I2C_SCL",
     "HUB_RST_L",
     "PEN_RST_ODL",
     "AP_RAM_ID1",
     "AP_RAM_ID2",
     "PEN_IRQ_L",
     "FPMCU_SEL",
     "AMP_EN",
     "P_SENSOR_INT_L",
     "AP_SAR_SENSOR_SDA",
     "AP_SAR_SENSOR_SCL",
     "",
     "HP_IRQ",
     "AP_RAM_ID0",
     "EN_PP3300_DX_EDP",
     "AP_BRD_ID2",
     "BRIJ_SUSPEND",
     "AP_BRD_ID0",
     "AP_H1_SPI_MISO",
     "AP_H1_SPI_MOSI",
     "AP_H1_SPI_CLK",
     "AP_H1_SPI_CS_L",
     "",
     "",
     "",
     "",
     "H1_AP_INT_ODL",
     "",
     "UART_AP_TX_DBG_RX",
     "UART_DBG_TX_AP_RX",
     "HP_I2C_SDA",
     "HP_I2C_SCL",
     "FORCED_USB_BOOT",
     "",
     "",
     "AMP_DIN",
     "PEN_PDCT_L",
     "HP_BCLK",
     "HP_LRCLK",
     "HP_DOUT",
     "HP_DIN",
     "HP_MCLK",
     "TRACKPAD_INT_1V8_ODL",
     "AP_EC_SPI_MISO",
     "AP_EC_SPI_MOSI",
     "AP_EC_SPI_CLK",
     "AP_EC_SPI_CS_L",
     "AP_SPI_CLK",
     "AP_SPI_MOSI",
     "AP_SPI_MISO",
     /*
      * AP_FLASH_WP_L is crossystem ABI. Schematics
      * call it BIOS_FLASH_WP_L.
      */
     "AP_FLASH_WP_L",
     "DBG_SPI_HOLD_L",
     "AP_SPI_CS0_L",
     "SD_CD_ODL",
     "",
     "",
     "",
     "",
     "",
     "UIM2_DATA",
     "UIM2_CLK",
     "UIM2_RST",
     "UIM2_PRESENT",
     "UIM1_DATA",
     "UIM1_CLK",
     "UIM1_RST",
     "",
     "EN_PP3300_CODEC",
     "EN_PP3300_HUB",
     "",
     "AP_SPI_FP_MISO",
     "AP_SPI_FP_MOSI",
     "AP_SPI_FP_CLK",
     "AP_SPI_FP_CS_L",
     "AP_SKU_ID1",
     "AP_RST_REQ",
     "",
     "AP_BRD_ID1",
     "AP_EC_INT_L",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "EDP_BRIJ_EN",
     "AP_SKU_ID0",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "AP_TS_PEN_I2C_SDA",
     "AP_TS_PEN_I2C_SCL",
     "DP_HOT_PLUG_DET",
     "EC_IN_RW_ODL";
};