Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/m68k/math-emu/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 7 kB image not shown  

Quelle  fp_movem.S   Sprache: Sparc

 
/*
 * fp_movem.S
 *
 * Copyright Roman Zippel, 1997.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, and the entire permission notice in its entirety,
 *    including the disclaimer of warranties.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.
 *
 * ALTERNATIVELY, this product may be distributed under the terms of
 * the GNU General Public License, in which case the provisions of the GPL are
 * required INSTEAD OF the above restrictions.  (This clause is
 * necessary due to a potential bad interaction between the GPL and
 * the restrictions contained in a BSD-style copyright.)
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 */


#include "fp_emu.h"
#include "fp_decode.h"

set flags for decode macros for fmovem
do_fmovem=1

 .globl fp_fmovem_fp, fp_fmovem_cr

| %d1 contains the mask and count of the register list
| for other register usage see fp_decode.h

fp_fmovem_fp:
 printf PDECODE,"fmovem.x "
 | get register list and count them
 btst #11,%d2
 jne 1f
 bfextu %d2{#24,#8},%d0  | static register list
 jra 2f
1: bfextu %d2{#25,#3},%d0  | dynamic register list
 jsr fp_get_data_reg
2: move.l %d0,%d1
 swap %d1
 jra 2f
1: addq.w #1,%d1   | count the # of registers in
2: lsr.b #1,%d0   | register list and keep it in %d1
 jcs 1b
 jne 2b
 printf PDECODE,"#%08x",1,%d1
#ifdef FPU_EMU_DEBUG
 btst #12,%d2
 jne 1f
 printf PDECODE,"-"  | decremental move
 jra 2f
1: printf PDECODE,"+"  | incremental move
2: btst #13,%d2
 jeq 1f
 printf PDECODE,"->"  | fpu -> cpu
 jra 2f
1: printf PDECODE,"<-"  | fpu <- cpu
2:
#endif

 | decode address mode
 fp_decode_addr_mode

 .long fp_ill, fp_ill
 .long fpr_indirect, fpr_postinc
 .long fpr_predecr, fpr_disp16
 .long fpr_extmode0, fpr_extmode1

 | addressing mode: address register indirect
fpr_indirect:
 fp_mode_addr_indirect
 jra fpr_do_movem

 | addressing mode: address register indirect with postincrement
fpr_postinc:
 fp_mode_addr_indirect_postinc
 jra fpr_do_movem

fpr_predecr:
 fp_mode_addr_indirect_predec
 jra fpr_do_movem

 | addressing mode: address register/programm counter indirect
 |     with 16bit displacement
fpr_disp16:
 fp_mode_addr_indirect_disp16
 jra fpr_do_movem

fpr_extmode0:
 fp_mode_addr_indirect_extmode0
 jra fpr_do_movem

fpr_extmode1:
 fp_decode_addr_reg
 jmp ([0f:w,%pc,%d0*4])

 .align 4
0:
 .long fpr_absolute_short, fpr_absolute_long
 .long fpr_disp16, fpr_extmode0
 .long fp_ill, fp_ill
 .long fp_ill, fp_ill

fpr_absolute_short:
 fp_mode_abs_short
 jra fpr_do_movem

fpr_absolute_long:
 fp_mode_abs_long
| jra fpr_do_movem

fpr_do_movem:
 swap %d1   | get fpu register list
 lea (FPD_FPREG,FPDATA),%a1
 moveq #12,%d0
 btst #12,%d2
 jne 1f
 lea (-12,%a1,%d0*8),%a1
 neg.l %d0
1: btst #13,%d2
 jne 4f
 | move register from memory into fpu
 jra 3f
1: printf PMOVEM,"(%p>%p)",2,%a0,%a1
 getuser.l (%a0)+,%d2,fp_err_ua1,%a0
 lsr.l #8,%d2
 lsr.l #7,%d2
 lsr.w #1,%d2
 move.l %d2,(%a1)+
 getuser.l (%a0)+,%d2,fp_err_ua1,%a0
 move.l %d2,(%a1)+
 getuser.l (%a0),%d2,fp_err_ua1,%a0
 move.l %d2,(%a1)
 subq.l #8,%a0
 subq.l #8,%a1
 add.l %d0,%a0
2: add.l %d0,%a1
3: lsl.b #1,%d1
 jcs 1b
 jne 2b
 jra 5f
 | move register from fpu into memory
1: printf PMOVEM,"(%p>%p)",2,%a1,%a0
 move.l (%a1)+,%d2
 lsl.w #1,%d2
 lsl.l #7,%d2
 lsl.l #8,%d2
 putuser.l %d2,(%a0)+,fp_err_ua1,%a0
 move.l (%a1)+,%d2
 putuser.l %d2,(%a0)+,fp_err_ua1,%a0
 move.l (%a1),%d2
 putuser.l %d2,(%a0),fp_err_ua1,%a0
 subq.l #8,%a1
 subq.l #8,%a0
 add.l %d0,%a0
2: add.l %d0,%a1
4: lsl.b #1,%d1
 jcs 1b
 jne 2b
5:
 printf PDECODE,"\n"
#if 0
 lea (FPD_FPREG,FPDATA),%a0
 printf PMOVEM,"fp:"
 printx PMOVEM,%a0@(0)
 printx PMOVEM,%a0@(12)
 printf PMOVEM,"\n "
 printx PMOVEM,%a0@(24)
 printx PMOVEM,%a0@(36)
 printf PMOVEM,"\n "
 printx PMOVEM,%a0@(48)
 printx PMOVEM,%a0@(60)
 printf PMOVEM,"\n "
 printx PMOVEM,%a0@(72)
 printx PMOVEM,%a0@(84)
 printf PMOVEM,"\n"
#endif
 jra fp_end

set flags for decode macros for fmovem control register
do_fmovem=1
do_fmovem_cr=1

fp_fmovem_cr:
 printf PDECODE,"fmovem.cr "
 | get register list and count them
 bfextu %d2{#19,#3},%d0
 move.l %d0,%d1
 swap %d1
 jra 2f
1: addq.w #1,%d1
2: lsr.l #1,%d0
 jcs 1b
 jne 2b
 printf PDECODE,"#%08x",1,%d1
#ifdef FPU_EMU_DEBUG
 btst #13,%d2
 jeq 1f
 printf PDECODE,"->"  | fpu -> cpu
 jra 2f
1: printf PDECODE,"<-"  | fpu <- cpu
2:
#endif

 | decode address mode
 fp_decode_addr_mode

 .long fpc_data, fpc_addr
 .long fpc_indirect, fpc_postinc
 .long fpc_predecr, fpc_disp16
 .long fpc_extmode0, fpc_extmode1

fpc_data:
 fp_mode_data_direct
 move.w %d0,%d1
 bfffo %d2{#19,#3},%d0
 sub.w #19,%d0
 lea (FPD_FPCR,FPDATA,%d0.w*4),%a1
 btst #13,%d2
 jne 1f
 move.w %d1,%d0
 jsr fp_get_data_reg
 move.l %d0,(%a1)
 jra fpc_movem_fin
1: move.l (%a1),%d0
 jsr fp_put_data_reg
 jra fpc_movem_fin

fpc_addr:
 fp_decode_addr_reg
 printf PDECODE,"a%d",1,%d0
 btst #13,%d2
 jne 1f
 jsr fp_get_addr_reg
 move.l %a0,(FPD_FPIAR,FPDATA)
 jra fpc_movem_fin
1: move.l (FPD_FPIAR,FPDATA),%a0
 jsr fp_put_addr_reg
 jra fpc_movem_fin

fpc_indirect:
 fp_mode_addr_indirect
 jra fpc_do_movem

fpc_postinc:
 fp_mode_addr_indirect_postinc
 jra fpc_do_movem

fpc_predecr:
 fp_mode_addr_indirect_predec
 jra fpc_do_movem

fpc_disp16:
 fp_mode_addr_indirect_disp16
 jra fpc_do_movem

fpc_extmode0:
 fp_mode_addr_indirect_extmode0
 jra fpc_do_movem

fpc_extmode1:
 fp_decode_addr_reg
 jmp ([0f:w,%pc,%d0*4])

 .align 4
0:
 .long fpc_absolute_short, fpc_absolute_long
 .long fpc_disp16, fpc_extmode0
 .long fpc_immediate, fp_ill
 .long fp_ill, fp_ill

fpc_absolute_short:
 fp_mode_abs_short
 jra fpc_do_movem

fpc_absolute_long:
 fp_mode_abs_long
 jra fpc_do_movem

fpc_immediate:
 fp_get_pc %a0
 lea (%a0,%d1.w*4),%a1
 fp_put_pc %a1
 printf PDECODE,"#imm"
| jra fpc_do_movem
#if 0
 swap %d1
 lsl.l #5,%d1
 lea (FPD_FPCR,FPDATA),%a0
 jra 3f
1: move.l %d0,(%a0)
2: addq.l #4,%a0
3: lsl.b #1,%d1
 jcs 1b
 jne 2b
 jra fpc_movem_fin
#endif

fpc_do_movem:
 swap %d1   | get fpu register list
 lsl.l #5,%d1
 lea (FPD_FPCR,FPDATA),%a1
1: btst #13,%d2
 jne 4f

 | move register from memory into fpu
 jra 3f
1: printf PMOVEM,"(%p>%p)",2,%a0,%a1
 getuser.l (%a0)+,%d0,fp_err_ua1,%a0
 move.l %d0,(%a1)
2: addq.l #4,%a1
3: lsl.b #1,%d1
 jcs 1b
 jne 2b
 jra fpc_movem_fin

 | move register from fpu into memory
1: printf PMOVEM,"(%p>%p)",2,%a1,%a0
 move.l (%a1),%d0
 putuser.l %d0,(%a0)+,fp_err_ua1,%a0
2: addq.l #4,%a1
4: lsl.b #1,%d1
 jcs 1b
 jne 2b

fpc_movem_fin:
 and.l #0x0000fff0,(FPD_FPCR,FPDATA)
 and.l #0x0ffffff8,(FPD_FPSR,FPDATA)
 move.l (FPD_FPCR,FPDATA),%d0
 lsr.l #4,%d0
 moveq #3,%d1
 and.l %d0,%d1
 move.w %d1,(FPD_RND,FPDATA)
 lsr.l #2,%d0
 moveq #3,%d1
 and.l %d0,%d1
 move.w %d1,(FPD_PREC,FPDATA)
 printf PDECODE,"\n"
#if 0
 printf PMOVEM,"fpcr : %08x\n",1,FPDATA@(FPD_FPCR)
 printf PMOVEM,"fpsr : %08x\n",1,FPDATA@(FPD_FPSR)
 printf PMOVEM,"fpiar: %08x\n",1,FPDATA@(FPD_FPIAR)
 clr.l %d0
 move.w (FPD_PREC,FPDATA),%d0
 printf PMOVEM,"prec : %04x\n",1,%d0
 move.w (FPD_RND,FPDATA),%d0
 printf PMOVEM,"rnd : %04x\n",1,%d0
#endif
 jra fp_end

Messung V0.5
C=92 H=94 G=92

¤ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.