/* pointers to the mm structs for each task in each
context. 0xffffffff is a marker for kernel context */ staticstruct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
[0] = (struct mm_struct *)0xffffffff
};
/* has this context been mmdrop'd? */ staticunsignedchar ctx_avail = CONTEXTS_NUM-1;
/* array of pages to be marked off for the rom when we do mem_init later */ /* 256 pages lets the rom take up to 2mb of physical ram.. I really
hope it never wants mote than that. */ unsignedlong rom_pages[256];
/* Print a PTE value in symbolic form. For debugging. */ staticvoid print_pte(pte_t pte)
{ #if 0 /* Verbose version. */ unsignedlong val = pte_val (pte);
pr_cont(" pte=%lx [addr=%lx",
val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT); if (val & SUN3_PAGE_VALID) pr_cont(" valid"); if (val & SUN3_PAGE_WRITEABLE) pr_cont(" write"); if (val & SUN3_PAGE_SYSTEM) pr_cont(" sys"); if (val & SUN3_PAGE_NOCACHE) pr_cont(" nocache"); if (val & SUN3_PAGE_ACCESSED) pr_cont(" accessed"); if (val & SUN3_PAGE_MODIFIED) pr_cont(" modified"); switch (val & SUN3_PAGE_TYPE_MASK) { case SUN3_PAGE_TYPE_MEMORY: pr_cont(" memory"); break; case SUN3_PAGE_TYPE_IO: pr_cont(" io"); break; case SUN3_PAGE_TYPE_VME16: pr_cont(" vme16"); break; case SUN3_PAGE_TYPE_VME32: pr_cont(" vme32"); break;
}
pr_cont("]\n"); #else /* Terse version. More likely to fit on a line. */ unsignedlong val = pte_val (pte); char flags[7], *type;
switch (val & SUN3_PAGE_TYPE_MASK) { case SUN3_PAGE_TYPE_MEMORY: type = "memory"; break; case SUN3_PAGE_TYPE_IO: type = "io" ; break; case SUN3_PAGE_TYPE_VME16: type = "vme16" ; break; case SUN3_PAGE_TYPE_VME32: type = "vme32" ; break; default: type = "unknown?"; break;
}
/* Print the PTE value for a given virtual address. For debugging. */ void print_pte_vaddr (unsignedlong vaddr)
{
pr_cont(" vaddr=%lx [%02lx]", vaddr, sun3_get_segmap (vaddr));
print_pte (__pte (sun3_get_pte (vaddr)));
}
/* * Initialise the MMU emulator.
*/ void __init mmu_emu_init(unsignedlong bootmem_end)
{ unsignedlong seg, num; int i,j;
/* pmeg align the end of bootmem, adding another pmeg,
* later bootmem allocations will likely need it */
bootmem_end = (bootmem_end + (2 * SUN3_PMEG_SIZE)) & ~SUN3_PMEG_MASK;
/* mark all of the pmegs used thus far as reserved */ for (i=0; i < __pa(bootmem_end) / SUN3_PMEG_SIZE ; ++i)
pmeg_alloc[i] = 2;
/* I'm thinking that most of the top pmeg's are going to be
used for something, and we probably shouldn't risk it */ for(num = 0xf0; num <= 0xff; num++)
pmeg_alloc[num] = 2;
/* liberate all existing mappings in the rest of kernel space */ for(seg = bootmem_end; seg < 0x0f800000; seg += SUN3_PMEG_SIZE) {
i = sun3_get_segmap(seg);
j = 0; for (num=0, seg=0x0F800000; seg<0x10000000; seg+=16*PAGE_SIZE) { if (sun3_get_segmap (seg) != SUN3_INVALID_PMEG) { #ifdef DEBUG_PROM_MAPS for(i = 0; i < 16; i++) {
pr_info("mapped:");
print_pte_vaddr (seg + (i*PAGE_SIZE)); break;
} #endif // the lowest mapping here is the end of our // vmalloc region if (!m68k_vmalloc_end)
m68k_vmalloc_end = seg;
// mark the segmap alloc'd, and reserve any // of the first 0xbff pages the hardware is // already using... does any sun3 support > 24mb?
pmeg_alloc[sun3_get_segmap(seg)] = 2;
}
}
dvma_init();
/* blank everything below the kernel, and we've got the base
mapping to start all the contexts off with... */ for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE)
sun3_put_segmap(seg, SUN3_INVALID_PMEG);
set_fc(3); for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) {
i = sun3_get_segmap(seg); for(j = 1; j < CONTEXTS_NUM; j++)
(*(romvec->pv_setctxt))(j, (void *)seg, i);
}
set_fc(USER_DATA);
}
/* erase the mappings for a dead context. Uses the pg_dir for hints as the pmeg tables proved somewhat unreliable, and unmapping all of
TASK_SIZE was much slower and no more stable. */ /* todo: find a better way to keep track of the pmegs used by a
context for when they're cleared */ void clear_context(unsignedlong context)
{ unsignedchar oldctx; unsignedlong i;
if (context) { if (!ctx_alloc[context])
panic("%s: context not allocated\n", __func__);
for (i = 0; i < SUN3_INVALID_PMEG; i++) { if ((pmeg_ctx[i] == context) && (pmeg_alloc[i] == 1)) {
sun3_put_segmap(pmeg_vaddr[i], SUN3_INVALID_PMEG);
pmeg_ctx[i] = 0;
pmeg_alloc[i] = 0;
pmeg_vaddr[i] = 0;
}
}
sun3_put_context(oldctx);
}
/* gets an empty context. if full, kills the next context listed to
die first */ /* This context invalidation scheme is, well, totally arbitrary, I'm sure it could be much more intelligent... but it gets the job done
for now without much overhead in making it's decision. */ /* todo: come up with optimized scheme for flushing contexts */ unsignedlong get_free_context(struct mm_struct *mm)
{ unsignedlongnew = 1; staticunsignedchar next_to_die = 1;
if(!ctx_avail) { /* kill someone to get our context */ new = next_to_die;
clear_context(new);
next_to_die = (next_to_die + 1) & 0x7; if(!next_to_die)
next_to_die++;
} else { while(new < CONTEXTS_NUM) { if(ctx_alloc[new]) new++; else break;
} // check to make sure one was really free... if(new == CONTEXTS_NUM)
panic("%s: failed to find free context", __func__);
}
ctx_alloc[new] = mm;
ctx_avail--;
returnnew;
}
/* * Dynamically select a `spare' PMEG and use it to map virtual `vaddr' in * `context'. Maintain internal PMEG management structures. This doesn't * actually map the physical address, but does clear the old mappings.
*/ //todo: better allocation scheme? but is extra complexity worthwhile? //todo: only clear old entries if necessary? how to tell?
inlinevoid mmu_emu_map_pmeg (int context, int vaddr)
{ staticunsignedchar curr_pmeg = 128; int i;
/* Round address to PMEG boundary. */
vaddr &= ~SUN3_PMEG_MASK;
/* Find a spare one. */ while (pmeg_alloc[curr_pmeg] == 2)
++curr_pmeg;
/* Invalidate old mapping for the pmeg, if any */ if (pmeg_alloc[curr_pmeg] == 1) {
sun3_put_context(pmeg_ctx[curr_pmeg]);
sun3_put_segmap (pmeg_vaddr[curr_pmeg], SUN3_INVALID_PMEG);
sun3_put_context(context);
}
/* Update PMEG management structures. */ // don't take pmeg's away from the kernel... if(vaddr >= PAGE_OFFSET) { /* map kernel pmegs into all contexts */ unsignedchar i;
/* Set hardware mapping and clear the old PTE entries. */ for (i=0; i<SUN3_PMEG_SIZE; i+=SUN3_PTE_SIZE)
sun3_put_pte (vaddr + i, SUN3_PAGE_SYSTEM);
/* Consider a different one next time. */
++curr_pmeg;
}
/* * Handle a pagefault at virtual address `vaddr'; check if there should be a * page there (specifically, whether the software pagetables indicate that * there is). This is necessary due to the limited size of the second-level * Sun3 hardware pagetables (256 groups of 16 pages). If there should be a * mapping present, we select a `spare' PMEG and use it to create a mapping. * `read_flag' is nonzero for a read fault; zero for a write. Returns nonzero * if we successfully handled the fault.
*/ //todo: should we bump minor pagefault counter? if so, here or in caller? //todo: possibly inline this into bus_error030 in <asm/buserror.h> ?
// kernel_fault is set when a kernel page couldn't be demand mapped, // and forces another try using the kernel page table. basically a // hack so that vmalloc would work correctly.
int mmu_emu_handle_fault (unsignedlong vaddr, int read_flag, int kernel_fault)
{ unsignedlong segment, offset; unsignedchar context;
pte_t *pte;
pgd_t * crp;
/* Make sure this is a valid page */ if (!(pte_val (*pte) & SUN3_PAGE_VALID)) return 0;
/* Make sure there's a pmeg allocated for the page */ if (sun3_get_segmap (vaddr&~SUN3_PMEG_MASK) == SUN3_INVALID_PMEG)
mmu_emu_map_pmeg (context, vaddr);
/* Write the pte value to hardware MMU */
sun3_put_pte (vaddr&PAGE_MASK, pte_val (*pte));
/* Update software copy of the pte value */ // I'm not sure this is necessary. If this is required, we ought to simply // copy this out when we reuse the PMEG or at some other convenient time. // Doing it here is fairly meaningless, anyway, as we only know about the // first access to a given page. --m if (!read_flag) { if (pte_val (*pte) & SUN3_PAGE_WRITEABLE)
pte_val (*pte) |= (SUN3_PAGE_ACCESSED
| SUN3_PAGE_MODIFIED); else return 0; /* Write-protect error. */
} else
pte_val (*pte) |= SUN3_PAGE_ACCESSED;
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.