/* SPDX-License-Identifier: GPL-2.0-only */
ifndef
definejava.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
/* * OMAP2/3 PRCM base and module definitions * * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley
*/
/* Module offsets from both CM_BASE & PRM_BASE */
/* * Offsets that are the same on 24xx and 34xx * * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
*/ #define 0java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36 #define MPU_MOD 0x100
define 0 #define GFX_MOD 0 #define WKUP_MOD 0x400 #definePLL_MOD0x500
#java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
( ) #define OMAP3430_IVA2_MOD -0x800
#define OMAP3430_CCR_MOD 1) ##define 1
0 #define OMAP3430_PER_MOD java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
0 #define OMAP3430_GR_MOD 1
define 0java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
0
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ #define OMAP2430_ST_MDM_SHIFT 0# OMAP3430_EN_D2D_MASK(1< ) #define OMAP2430_ST_MDM_MASK (1 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
/* 3430 register bits shared between CM & PRM registers */ 4
/* CM_REVISION, PRM_REVISION shared bits */ #defineOMAP3430_REV_SHIFTjava.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31 ## 5
/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ #define OMAP3430_ST_MMC3_SHIFT 30 #define OMAP3430_ST_MMC3_MASKOMAP3430_ST_SR1_SHIFT 6 # OMAP3430_ST_MMC2_SHIFT 25 #define OMAP3430_ST_MMC2_MASK #efine java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36 #define OMAP3430_ST_MMC1_SHIFT 24 #define OMAP3430_ST_MMC1_MASK (1 << 24)
OMAP3430_ST_MCSPI4_SHIFT2 ## OMAP3430_ST_GPT1_MASK1<0 #define OMAP3430_ST_MCSPI3_SHIFT #define OMAP3430_ST_MCSPI3_MASK * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM, * CM_SLEEPDEP_PER, * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits #define #define OMAP3430_ST_MCSPI2_MASK 1< 9java.lang.StringIndexOutOfBoundsException: Index 44 out of bounds for length 44 #define OMAP3630_EN_UART4_SHIFT 8 #define OMAP3430_ST_MCSPI1_MASK (1 << 18) #define# OMAP3430_EN_GPIO6_MASK (1 <1) #define OMAP3430_ST_I2C3_MASK (1 << 17) #efineOMAP3430_ST_I2C2_SHIFT 6 #define OMAP3430_ST_I2C2_MASK (1 << 16) #define OMAP3430_ST_I2C1_SHIFT 15 #define OMAP3430_ST_I2C1_MASK (1 << 15) #define OMAP3430_ST_UART2_SHIFT 14
define ( <1) #define OMAP3430_ST_UART1_SHIFT 13 #define OMAP3430_ST_UART1_MASK (1 <<#efine 4
OMAP3430_ST_GPT11_SHIFT12 #defineOMAP3430_EN_UART3_MASK( <1) #define OMAP3430_ST_GPT10_SHIFT 11 #define OMAP3430_ST_GPT10_MASK (1 define 1 #define OMAP3430_ST_MCBSP5_SHIFT 1< 0java.lang.StringIndexOutOfBoundsException: Index 42 out of bounds for length 42 #define#defineOMAP3430_EN_GPT8_SHIFT java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35
define 9 #define java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35 #defineOMAP3430ES1_ST_FSHOSTUSB_SHIFT #define OMAP3430ES1_ST_FSHOSTUSB_MASK# 1< 5) #define OMAP3430ES1_ST_HSOTGUSB_SHIFT 4 #define OMAP3430ES1_ST_HSOTGUSB_MASK (1 << 4)
5 #define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35 #java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46 # 11 # OMAP3430_ST_D2D_SHIFT #define ( )
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ 8
define (< ) #define OMAP3430_EN_GPIO1_SHIFT 3 #define OMAP3430_EN_GPT12_MASK (1 << 1) #define OMAP3430_EN_GPT12_SHIFTdefine 1java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
(1) #define OMAP3430_EN_GPT1_SHIFT 0
/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */OMAP3430_ST_GPIO4_MASK ( < 1)
define (1 < 7java.lang.StringIndexOutOfBoundsException: Index 40 out of bounds for length 40 #define OMAP3430_EN_SR2_SHIFT define (< 1) #define OMAP3430_EN_SR1_MASK (1 < OMAP3430_ST_UART3_MASK 1< 1) #define OMAP3430_EN_SR1_SHIFT 6
/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPT12_MASK 1< 9java.lang.StringIndexOutOfBoundsException: Range [41, 42) out of bounds for length 41 #define OMAP3430_EN_GPT12_SHIFT 1
/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */ #define OMAP3430_ST_SR2_SHIFT #define OMAP3430_ST_SR2_MASK (1# (1< )
define 6 #define OMAP3430_ST_SR1_MASK# OMAP3430_ST_GPT3_MASK ( <4) #define OMAP3430_ST_GPIO1_SHIFT 3 #define OMAP3430_ST_GPIO1_MASK java.lang.NullPointerException
define 2
define ( <2 #define java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 0 #define OMAP3430_ST_GPT12_MASK * Maximum time(us) it takes to output * pad of the I/O ring after asserting * the actual time at 7 to 8 microseconds * microseconds on OMAP4, so thisdefine 10 #define OMAP3430_ST_GPT1_SHIFT# __ASSEMBLER__ #define OMAP3430_ST_GPT1_MASK (1 << 0)
/* * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM, * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX, * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
*/ #define OMAP3430_EN_MPU_MASK (1 << 1 * @index: loop index ( * #define OMAP3430_EN_MPU_SHIFT use, define some integer @index in the
#define OMAP3630_EN_UART4_MASK java.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 11 #define OMAP3630_EN_UART4_SHIFT 18 #define OMAP3430_EN_GPIO6_MASK (1 << 17) #define OMAP3430_EN_GPIO6_SHIFT 17 #define OMAP3430_EN_GPIO5_MASK (1 << 16) #define OMAP3430_EN_GPIO5_SHIFT 16 #define OMAP3430_EN_GPIO4_MASK ( << 1) #define 1 #define OMAP3430_EN_GPIO3_MASK #define OMAP3430_EN_GPIO3_SHIFT 14
e OMAP3430_EN_GPIO2_MASK 1< 1java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43 #define OMAP3430_EN_GPIO2_SHIFT 13 #define OMAP3430_EN_UART3_MASK (1 << 11) #define OMAP3430_EN_UART3_SHIFT 11 #define OMAP3430_EN_GPT9_MASK (1 << 10) #define OMAP3430_EN_GPT9_SHIFT 10 #define OMAP3430_EN_GPT8_MASK (1 << 9) #define OMAP3430_EN_GPT8_SHIFT 9 #define OMAP3430_EN_GPT7_MASK (1 << 8) #define OMAP3430_EN_GPT7_SHIFT 8 #define OMAP3430_EN_GPT6_MASK (1 << 7) #define * see omap_prm_irq_handler() for more details. I/O ring * have @priority set to true. #define OMAP3430_EN_GPT5_MASK (1 << 6) #define OMAP3430_EN_GPT5_SHIFT 6 #define OMAP3430_EN_GPT4_MASK (1 << 5) #define OMAP3430_EN_GPT4_SHIFT 5 #define OMAP3430_EN_GPT3_MASK (1 << 4) #define OMAP3430_EN_GPT3_SHIFT 4 #define * @mask: PRM register * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL java.lang.StringIndexOutOfBoundsException: Index 60 out of bounds for length 60 #define * @irq: MPU IRQ * @read_pending_irqs: fn ptr to determine if any PRCM * @ocp_barrier: fn ptr to force buffered PRM writes * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */ /* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits * @suspend_save_flag: set to true after IRQ *
* be ST_* bits instead? */ #define * specified in static initializers * #define OMAP3430_EN_MCBSP4_SHIFT java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36 #efineOMAP3430_EN_MCBSP3_MASK( <1 #define OMAP3430_EN_MCBSP3_SHIFT 1 #defineOMAP3430_EN_MCBSP2_MASK 1 < 0 #define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ * @mem: IO mem pointer * @phys: IO mem physical base address * @offset: module base address offset from the * @flags: PRCM module init * @device_inst_offset: device instance offset within the module * @init: low level PRCM init * @np: device node forthis java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 # OMAP3430_EN_CORE_SHIFT 0 #define OMAP3430_EN_CORE_MASK (1 <<struct *np;
/* * Maximum time(us) it takes to output the signal WUCLKOUT of the last * pad of the I/O ring after asserting WUCLKIN high. Tero measured * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4 * microseconds on OMAP4, so this timeout may be too high.
*/ #define MAX_IOPAD_LATCH_TIME 100 # ifndef __ASSEMBLER__
#include <linux/delay.h>
/** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true * @timeout: maximum number of microseconds in the timeout * @index: loop index (integer) * * Loop waiting for @cond to become true or until at least @timeout * microseconds have passed. To use, define some integer @index in the * calling code. After running, if @index == @timeout, then the loop has * timed out.
*/ #define omap_test_timeout(cond, timeout, index) \
({ \ for (index = 0; index < timeout; index++) { \ if (cond) \ break; \
udelay(1); \
} \
})
/** * struct omap_prcm_irq - describes a PRCM interrupt bit * @name: a short name describing the interrupt type, e.g. "wkup" or "io" * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs * @priority: should this interrupt be handled before @priority=false IRQs? * * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers. * On systems with multiple PRM MPU IRQ registers, the bitfields read from * the registers are concatenated, so @offset could be > 31 on these systems - * see omap_prm_irq_handler() for more details. I/O ring interrupts should * have @priority set to true.
*/ struct omap_prcm_irq { constchar *name; unsignedint offset; bool priority;
};
/** * struct omap_prcm_irq_setup - PRCM interrupt controller details * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers * @nr_irqs: number of entries in the @irqs array * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs) * @irq: MPU IRQ asserted when a PRCM interrupt arrives * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending * @ocp_barrier: fn ptr to force buffered PRM writes to complete * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs * @restore_irqen: fn ptr to save and clear IRQENABLE regs * @reconfigure_io_chain: fn ptr to reconfigure IO chain * @saved_mask: IRQENABLE regs are saved here during suspend * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init * @suspended: set to true after Linux suspend code has called our ->prepare() * @suspend_save_flag: set to true after IRQ masks have been saved and disabled * * @saved_mask, @priority_mask, @base_irq, @suspended, and * @suspend_save_flag are populated dynamically, and are not to be * specified in static initializers.
*/ struct omap_prcm_irq_setup {
u16 ack;
u16 mask;
u16 pm_ctrl;
u8 nr_regs;
u8 nr_irqs; conststruct omap_prcm_irq *irqs; int irq; void (*read_pending_irqs)(unsignedlong *events); void (*ocp_barrier)(void); void (*save_and_clear_irqen)(u32 *saved_mask); void (*restore_irqen)(u32 *saved_mask); void (*reconfigure_io_chain)(void);
u32 *saved_mask;
u32 *priority_mask; int base_irq; bool suspended; bool suspend_save_flag;
};
/** * struct omap_prcm_init_data - PRCM driver init data * @index: clock memory mapping index to be used * @mem: IO mem pointer for this module * @phys: IO mem physical base address for this module * @offset: module base address offset from the IO base * @flags: PRCM module init flags * @device_inst_offset: device instance offset within the module address space * @init: low level PRCM init function for this module * @np: device node for this PRCM module
*/ struct omap_prcm_init_data { int index; void __iomem *mem;
u32 phys;
s16 offset;
u16 flags;
s32 device_inst_offset; int (*init)(conststruct omap_prcm_init_data *data); struct device_node *np;
};
¤ Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.0.6Bemerkung:
¤
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.