Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/clk/pxa/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 15 kB image not shown  

Quelle  clk-pxa3xx.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Marvell PXA3xxx family clocks
 *
 * Copyright (C) 2014 Robert Jarzmik
 *
 * Heavily inspired from former arch/arm/mach-pxa/pxa3xx.c
 *
 * For non-devicetree platforms. Once pxa is fully converted to devicetree, this
 * should go away.
 */

#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/soc/pxa/cpu.h>
#include <linux/soc/pxa/smemc.h>
#include <linux/clk/pxa.h>

#include <dt-bindings/clock/pxa-clock.h>
#include "clk-pxa.h"

#define KHz 1000
#define MHz (1000 * 1000)

#define ACCR   (0x0000) /* Application Subsystem Clock Configuration Register */
#define ACSR   (0x0004) /* Application Subsystem Clock Status Register */
#define AICSR   (0x0008) /* Application Subsystem Interrupt Control/Status Register */
#define CKENA   (0x000C) /* A Clock Enable Register */
#define CKENB   (0x0010) /* B Clock Enable Register */
#define CKENC   (0x0024) /* C Clock Enable Register */
#define AC97_DIV  (0x0014) /* AC97 clock divisor value register */

#define ACCR_XPDIS  (1 << 31) /* Core PLL Output Disable */
#define ACCR_SPDIS  (1 << 30) /* System PLL Output Disable */
#define ACCR_D0CS  (1 << 26) /* D0 Mode Clock Select */
#define ACCR_PCCE  (1 << 11) /* Power Mode Change Clock Enable */
#define ACCR_DDR_D0CS  (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */

#define ACCR_SMCFS_MASK  (0x7 << 23) /* Static Memory Controller Frequency Select */
#define ACCR_SFLFS_MASK  (0x3 << 18) /* Frequency Select for Internal Memory Controller */
#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
#define ACCR_HSS_MASK  (0x3 << 14) /* System Bus-Clock Frequency Select */
#define ACCR_DMCFS_MASK  (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
#define ACCR_XN_MASK  (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
#define ACCR_XL_MASK  (0x1f)  /* Core PLL Run-Mode-to-Oscillator Ratio */

#define ACCR_SMCFS(x)  (((x) & 0x7) << 23)
#define ACCR_SFLFS(x)  (((x) & 0x3) << 18)
#define ACCR_XSPCLK(x)  (((x) & 0x3) << 16)
#define ACCR_HSS(x)  (((x) & 0x3) << 14)
#define ACCR_DMCFS(x)  (((x) & 0x3) << 12)
#define ACCR_XN(x)  (((x) & 0x7) << 8)
#define ACCR_XL(x)  ((x) & 0x1f)

/*
 * Clock Enable Bit
 */

#define CKEN_LCD 1 /* < LCD Clock Enable */
#define CKEN_USBH 2 /* < USB host clock enable */
#define CKEN_CAMERA 3 /* < Camera interface clock enable */
#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
#define CKEN_BOOT 11 /* < Boot rom clock enable */
#define CKEN_MMC1 12 /* < MMC1 Clock enable */
#define CKEN_MMC2 13 /* < MMC2 clock enable */
#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
#define CKEN_TPM 19 /* < TPM clock enable */
#define CKEN_UDC 20 /* < UDC clock enable */
#define CKEN_BTUART 21 /* < BTUART clock enable */
#define CKEN_FFUART 22 /* < FFUART clock enable */
#define CKEN_STUART 23 /* < STUART clock enable */
#define CKEN_AC97 24 /* < AC97 clock enable */
#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
#define CKEN_SSP1 26 /* < SSP1 clock enable */
#define CKEN_SSP2 27 /* < SSP2 clock enable */
#define CKEN_SSP3 28 /* < SSP3 clock enable */
#define CKEN_SSP4 29 /* < SSP4 clock enable */
#define CKEN_MSL0 30 /* < MSL0 clock enable */
#define CKEN_PWM0 32 /* < PWM[0] clock enable */
#define CKEN_PWM1 33 /* < PWM[1] clock enable */
#define CKEN_I2C 36 /* < I2C clock enable */
#define CKEN_INTC 38 /* < Interrupt controller clock enable */
#define CKEN_GPIO 39 /* < GPIO clock enable */
#define CKEN_1WIRE 40 /* < 1-wire clock enable */
#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
#define CKEN_MINI_IM 48 /* < Mini-IM */
#define CKEN_MINI_LCD 49 /* < Mini LCD */

#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
#define CKEN_MVED 43 /* < MVED clock enable */

/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
#define CKEN_PXA300_GCU  42 /* Graphics controller clock enable */
#define CKEN_PXA320_GCU  7 /* Graphics controller clock enable */


enum {
 PXA_CORE_60Mhz = 0,
 PXA_CORE_RUN,
 PXA_CORE_TURBO,
};

enum {
 PXA_BUS_60Mhz = 0,
 PXA_BUS_HSS,
};

/* crystal frequency to HSIO bus frequency multiplier (HSS) */
static unsigned char hss_mult[4] = { 8, 12, 16, 24 };

/* crystal frequency to static memory controller multiplier (SMCFS) */
static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
static const char * const get_freq_khz[] = {
 "core""ring_osc_60mhz""run""cpll""system_bus"
};

static void __iomem *clk_regs;

/*
 * Get the clock frequency as reflected by ACSR and the turbo flag.
 * We assume these values have been applied via a fcs.
 * If info is not 0 we also display the current settings.
 */

unsigned int pxa3xx_get_clk_frequency_khz(int info)
{
 struct clk *clk;
 unsigned long clks[5];
 int i;

 for (i = 0; i < 5; i++) {
  clk = clk_get(NULL, get_freq_khz[i]);
  if (IS_ERR(clk)) {
   clks[i] = 0;
  } else {
   clks[i] = clk_get_rate(clk);
   clk_put(clk);
  }
 }
 if (info) {
  pr_info("RO Mode clock: %ld.%02ldMHz\n",
   clks[1] / 1000000, (clks[0] % 1000000) / 10000);
  pr_info("Run Mode clock: %ld.%02ldMHz\n",
   clks[2] / 1000000, (clks[1] % 1000000) / 10000);
  pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
   clks[3] / 1000000, (clks[2] % 1000000) / 10000);
  pr_info("System bus clock: %ld.%02ldMHz\n",
   clks[4] / 1000000, (clks[4] % 1000000) / 10000);
 }
 return (unsigned int)clks[0] / KHz;
}

void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask)
{
 u32 accr = readl(clk_regs + ACCR);

 accr &= ~disable;
 accr |= enable;

 writel(accr, clk_regs + ACCR);
 if (xclkcfg)
  __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));

 while ((readl(clk_regs + ACSR) & mask) != (accr & mask))
  cpu_relax();
}

static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
          unsigned long parent_rate)
{
 unsigned long ac97_div, rate;

 ac97_div = readl(clk_regs + AC97_DIV);

 /* This may loose precision for some rates but won't for the
 * standard 24.576MHz.
 */

 rate = parent_rate / 2;
 rate /= ((ac97_div >> 12) & 0x7fff);
 rate *= (ac97_div & 0xfff);

 return rate;
}
PARENTS(clk_pxa3xx_ac97) = { "spll_624mhz" };
RATE_RO_OPS(clk_pxa3xx_ac97, "ac97");

static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw,
           unsigned long parent_rate)
{
 unsigned long acsr = readl(clk_regs + ACSR);

 return (parent_rate / 48)  * smcfs_mult[(acsr >> 23) & 0x7] /
  pxa3xx_smemc_get_memclkdiv();

}
PARENTS(clk_pxa3xx_smemc) = { "spll_624mhz" };
RATE_RO_OPS(clk_pxa3xx_smemc, "smemc");

static bool pxa3xx_is_ring_osc_forced(void)
{
 unsigned long acsr = readl(clk_regs + ACSR);

 return acsr & ACCR_D0CS;
}

PARENTS(pxa3xx_pbus) = { "ring_osc_60mhz""spll_624mhz" };
PARENTS(pxa3xx_32Khz_bus) = { "osc_32_768khz""osc_32_768khz" };
PARENTS(pxa3xx_13MHz_bus) = { "osc_13mhz""osc_13mhz" };
PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz""ac97" };
PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz""system_bus" };
PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz""smemc" };

#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA)
#define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp, \
      div_hp, bit, is_lp, flags)    \
 PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp,  \
   mult_hp, div_hp, is_lp,  CKEN_AB(bit),   \
   (CKEN_ ## bit % 32), flags)
#define PXA3XX_PBUS_CKEN(dev_id, con_id, bit, mult_lp, div_lp,  \
    mult_hp, div_hp, delay)   \
 PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp, \
      div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, 0)
#define PXA3XX_CKEN_1RATE(dev_id, con_id, bit, parents)   \
 PXA_CKEN_1RATE(dev_id, con_id, bit, parents,   \
         CKEN_AB(bit), (CKEN_ ## bit % 32), 0)

static struct desc_clk_cken pxa3xx_clocks[] __initdata = {
 PXA3XX_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 4, 1, 42, 1),
 PXA3XX_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 4, 1, 42, 1),
 PXA3XX_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 4, 1, 42, 1),
 PXA3XX_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 5, 1, 19, 0),
 PXA3XX_PBUS_CKEN("pxa27x-udc", NULL, UDC, 1, 4, 1, 13, 5),
 PXA3XX_PBUS_CKEN("pxa27x-ohci", NULL, USBH, 1, 4, 1, 13, 0),
 PXA3XX_PBUS_CKEN("pxa3xx-u2d", NULL, USB2, 1, 4, 1, 13, 0),
 PXA3XX_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 6, 1, 48, 0),
 PXA3XX_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 6, 1, 48, 0),
 PXA3XX_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC1, 1, 4, 1, 24, 0),
 PXA3XX_PBUS_CKEN("pxa2xx-mci.1", NULL, MMC2, 1, 4, 1, 24, 0),
 PXA3XX_PBUS_CKEN("pxa2xx-mci.2", NULL, MMC3, 1, 4, 1, 24, 0),

 PXA3XX_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD,
     pxa3xx_32Khz_bus_parents),
 PXA3XX_CKEN_1RATE("pxa3xx-ssp.0", NULL, SSP1, pxa3xx_13MHz_bus_parents),
 PXA3XX_CKEN_1RATE("pxa3xx-ssp.1", NULL, SSP2, pxa3xx_13MHz_bus_parents),
 PXA3XX_CKEN_1RATE("pxa3xx-ssp.2", NULL, SSP3, pxa3xx_13MHz_bus_parents),
 PXA3XX_CKEN_1RATE("pxa3xx-ssp.3", NULL, SSP4, pxa3xx_13MHz_bus_parents),

 PXA3XX_CKEN(NULL, "AC97CLK", pxa3xx_ac97_bus_parents, 1, 4, 1, 1, AC97,
      pxa3xx_is_ring_osc_forced, 0),
 PXA3XX_CKEN(NULL, "CAMCLK", pxa3xx_sbus_parents, 1, 2, 1, 1, CAMERA,
      pxa3xx_is_ring_osc_forced, 0),
 PXA3XX_CKEN("pxa2xx-fb", NULL, pxa3xx_sbus_parents, 1, 1, 1, 1, LCD,
      pxa3xx_is_ring_osc_forced, 0),
 PXA3XX_CKEN("pxa2xx-pcmcia", NULL, pxa3xx_smemcbus_parents, 1, 4,
      1, 1, SMC, pxa3xx_is_ring_osc_forced, CLK_IGNORE_UNUSED),
};

static struct desc_clk_cken pxa300_310_clocks[] __initdata = {

 PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
 PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
 PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
};

static struct desc_clk_cken pxa320_clocks[] __initdata = {
 PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 6, 0),
 PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA320_GCU, 1, 1, 1, 1, 0),
 PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
};

static struct desc_clk_cken pxa93x_clocks[] __initdata = {

 PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
 PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
 PXA3XX_CKEN_1RATE("pxa93x-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
};

static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw,
         unsigned long parent_rate)
{
 unsigned long acsr = readl(clk_regs + ACSR);
 unsigned int hss = (acsr >> 14) & 0x3;

 if (pxa3xx_is_ring_osc_forced())
  return parent_rate;
 return parent_rate / 48 * hss_mult[hss];
}

static u8 clk_pxa3xx_system_bus_get_parent(struct clk_hw *hw)
{
 if (pxa3xx_is_ring_osc_forced())
  return PXA_BUS_60Mhz;
 else
  return PXA_BUS_HSS;
}

PARENTS(clk_pxa3xx_system_bus) = { "ring_osc_60mhz""spll_624mhz" };
MUX_RO_RATE_RO_OPS(clk_pxa3xx_system_bus, "system_bus");

static unsigned long clk_pxa3xx_core_get_rate(struct clk_hw *hw,
           unsigned long parent_rate)
{
 return parent_rate;
}

static u8 clk_pxa3xx_core_get_parent(struct clk_hw *hw)
{
 unsigned long xclkcfg;
 unsigned int t;

 if (pxa3xx_is_ring_osc_forced())
  return PXA_CORE_60Mhz;

 /* Read XCLKCFG register turbo bit */
 __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
 t = xclkcfg & 0x1;

 if (t)
  return PXA_CORE_TURBO;
 return PXA_CORE_RUN;
}
PARENTS(clk_pxa3xx_core) = { "ring_osc_60mhz""run""cpll" };
MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core");

static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw,
          unsigned long parent_rate)
{
 unsigned long acsr = readl(clk_regs + ACSR);
 unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
 unsigned int t, xclkcfg;

 /* Read XCLKCFG register turbo bit */
 __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
 t = xclkcfg & 0x1;

 return t ? (parent_rate / xn) * 2 : parent_rate;
}
PARENTS(clk_pxa3xx_run) = { "cpll" };
RATE_RO_OPS(clk_pxa3xx_run, "run");

static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw,
 unsigned long parent_rate)
{
 unsigned long acsr = readl(clk_regs + ACSR);
 unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
 unsigned int xl = acsr & ACCR_XL_MASK;
 unsigned int t, xclkcfg;

 /* Read XCLKCFG register turbo bit */
 __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
 t = xclkcfg & 0x1;

 pr_info("RJK: parent_rate=%lu, xl=%u, xn=%u\n", parent_rate, xl, xn);
 return t ? parent_rate * xl * xn : parent_rate * xl;
}
PARENTS(clk_pxa3xx_cpll) = { "osc_13mhz" };
RATE_RO_OPS(clk_pxa3xx_cpll, "cpll");

static void __init pxa3xx_register_core(void)
{
 clk_register_clk_pxa3xx_cpll();
 clk_register_clk_pxa3xx_run();

 clkdev_pxa_register(CLK_CORE, "core", NULL,
       clk_register_clk_pxa3xx_core());
}

static void __init pxa3xx_register_plls(void)
{
 clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
    CLK_GET_RATE_NOCACHE,
    13 * MHz);
 clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
       clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
          CLK_GET_RATE_NOCACHE,
          32768));
 clk_register_fixed_rate(NULL, "ring_osc_120mhz", NULL,
    CLK_GET_RATE_NOCACHE,
    120 * MHz);
 clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
 clk_register_fixed_factor(NULL, "spll_624mhz""osc_13mhz", 0, 48, 1);
 clk_register_fixed_factor(NULL, "ring_osc_60mhz""ring_osc_120mhz",
      0, 1, 2);
}

#define DUMMY_CLK(_con_id, _dev_id, _parent) \
 { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
struct dummy_clk {
 const char *con_id;
 const char *dev_id;
 const char *parent;
};
static struct dummy_clk dummy_clks[] __initdata = {
 DUMMY_CLK(NULL, "pxa93x-gpio""osc_13mhz"),
 DUMMY_CLK(NULL, "sa1100-rtc""osc_32_768khz"),
 DUMMY_CLK("UARTCLK""pxa2xx-ir""STUART"),
 DUMMY_CLK(NULL, "pxa3xx-pwri2c.1""osc_13mhz"),
};

static void __init pxa3xx_dummy_clocks_init(void)
{
 struct clk *clk;
 struct dummy_clk *d;
 const char *name;
 int i;

 for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
  d = &dummy_clks[i];
  name = d->dev_id ? d->dev_id : d->con_id;
  clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
  clk_register_clkdev(clk, d->con_id, d->dev_id);
 }
}

static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg)
{
 struct clk *clk;

 pxa3xx_register_plls();
 pxa3xx_register_core();
 clk_register_clk_pxa3xx_system_bus();
 clk_register_clk_pxa3xx_ac97();
 clk_register_clk_pxa3xx_smemc();
 clk = clk_register_gate(NULL, "CLK_POUT",
    "osc_13mhz", 0, oscc_reg, 11, 0, NULL);
 clk_register_clkdev(clk, "CLK_POUT", NULL);
 clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
       clk_register_fixed_factor(NULL, "os-timer0",
            "osc_13mhz", 0, 1, 4));
}

int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg)
{
 int ret;

 clk_regs = regs;
 pxa3xx_base_clocks_init(oscc_reg);
 pxa3xx_dummy_clocks_init();
 ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs);
 if (ret)
  return ret;
 if (cpu_is_pxa320())
  return clk_pxa_cken_init(pxa320_clocks,
      ARRAY_SIZE(pxa320_clocks), regs);
 if (cpu_is_pxa300() || cpu_is_pxa310())
  return clk_pxa_cken_init(pxa300_310_clocks,
      ARRAY_SIZE(pxa300_310_clocks), regs);
 return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs);
}

static void __init pxa3xx_dt_clocks_init(struct device_node *np)
{
 pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4));
 clk_pxa_dt_common_init(np);
}
CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init);

Messung V0.5
C=93 H=91 G=91

¤ Dauer der Verarbeitung: 0.4 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.