Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/media/pci/bt8xx/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 3 kB image not shown  

Quelle  bt878.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
    bt878.h - Bt878 audio module (register offsets)

    Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>

*/


#ifndef _BT878_H_
#define _BT878_H_

#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>

#include "bt848.h"
#include "bttv.h"

#define BT878_VERSION_CODE 0x000000

#define BT878_AINT_STAT  0x100
#define BT878_ARISCS  (0xf<<28)
#define BT878_ARISC_EN  (1<<27)
#define BT878_ASCERR  (1<<19)
#define BT878_AOCERR  (1<<18)
#define BT878_APABORT  (1<<17)
#define BT878_ARIPERR  (1<<16)
#define BT878_APPERR  (1<<15)
#define BT878_AFDSR  (1<<14)
#define BT878_AFTRGT  (1<<13)
#define BT878_AFBUS  (1<<12)
#define BT878_ARISCI  (1<<11)
#define BT878_AOFLOW  (1<<3)

#define BT878_AINT_MASK  0x104

#define BT878_AGPIO_DMA_CTL 0x10c
#define BT878_A_GAIN  (0xf<<28)
#define BT878_A_G2X  (1<<27)
#define BT878_A_PWRDN  (1<<26)
#define BT878_A_SEL  (3<<24)
#define BT878_DA_SCE  (1<<23)
#define BT878_DA_LRI  (1<<22)
#define BT878_DA_MLB  (1<<21)
#define BT878_DA_LRD  (0x1f<<16)
#define BT878_DA_DPM  (1<<15)
#define BT878_DA_SBR  (1<<14)
#define BT878_DA_ES2  (1<<13)
#define BT878_DA_LMT  (1<<12)
#define BT878_DA_SDR  (0xf<<8)
#define BT878_DA_IOM  (3<<6)
#define BT878_DA_APP  (1<<5)
#define BT878_ACAP_EN  (1<<4)
#define BT878_PKTP  (3<<2)
#define BT878_RISC_EN  (1<<1)
#define BT878_FIFO_EN  1

#define BT878_APACK_LEN  0x110
#define BT878_AFP_LEN  (0xff<<16)
#define BT878_ALP_LEN  0xfff

#define BT878_ARISC_START 0x114

#define BT878_ARISC_PC  0x120

/* BT878 FUNCTION 0 REGISTERS */
#define BT878_GPIO_DMA_CTL 0x10c

/* Interrupt register */
#define BT878_INT_STAT  0x100
#define BT878_INT_MASK  0x104
#define BT878_I2CRACK  (1<<25)
#define BT878_I2CDONE  (1<<8)

#define BT878_MAX 4

#define BT878_RISC_SYNC_MASK (1 << 15)


#define BTTV_BOARD_UNKNOWN                 0x00
#define BTTV_BOARD_PINNACLESAT             0x5e
#define BTTV_BOARD_NEBULA_DIGITV           0x68
#define BTTV_BOARD_PC_HDTV                 0x70
#define BTTV_BOARD_TWINHAN_DST             0x71
#define BTTV_BOARD_AVDVBT_771              0x7b
#define BTTV_BOARD_AVDVBT_761              0x7c
#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87

extern int bt878_num;

struct bt878 {
 struct mutex gpio_lock;
 unsigned int nr;
 unsigned int bttv_nr;
 struct i2c_adapter *adapter;
 struct pci_dev *dev;
 unsigned int id;
 unsigned int TS_Size;
 unsigned char revision;
 unsigned int irq;
 unsigned long bt878_adr;
 volatile void __iomem *bt878_mem; /* function 1 */

 volatile u32 finished_block;
 volatile u32 last_block;
 u32 block_count;
 u32 block_bytes;
 u32 line_bytes;
 u32 line_count;

 u32 buf_size;
 u8 *buf_cpu;
 dma_addr_t buf_dma;

 u32 risc_size;
 __le32 *risc_cpu;
 dma_addr_t risc_dma;
 u32 risc_pos;

 struct work_struct bh_work;
 int shutdown;
};

extern struct bt878 bt878[BT878_MAX];

void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
  u32 irq_err_ignore);
void bt878_stop(struct bt878 *bt);

#define bmtwrite(dat,adr)  writel((dat), (adr))
#define bmtread(adr)       readl(adr)

#endif

Messung V0.5
C=97 H=100 G=98

¤ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.