// SPDX-License-Identifier: GPL-2.0 /* * This driver enables Trace Buffer Extension (TRBE) as a per-cpu coresight * sink device could then pair with an appropriate per-cpu coresight source * device (ETE) thus generating required trace data. Trace can be enabled * via the perf framework. * * The AUX buffer handling is inspired from Arm SPE PMU driver. * * Copyright (C) 2020 ARM Ltd. * * Author: Anshuman Khandual <anshuman.khandual@arm.com>
*/ #define DRVNAME "arm_trbe"
/* * A padding packet that will help the user space tools * in skipping relevant sections in the captured trace * data which could not be decoded. TRBE doesn't support * formatting the trace data, unlike the legacy CoreSight * sinks and thus we use ETE trace packets to pad the * sections of the buffer.
*/ #define ETE_IGNORE_PACKET 0x70
/* * Minimum amount of meaningful trace will contain: * A-Sync, Trace Info, Trace On, Address, Atom. * This is about 44bytes of ETE trace. To be on * the safer side, we assume 64bytes is the minimum * space required for a meaningful session, before * we hit a "WRAP" event.
*/ #define TRBE_TRACE_MIN_BUF_SIZE 64
struct trbe_buf { /* * Even though trbe_base represents vmap() * mapped allocated buffer's start address, * it's being as unsigned long for various * arithmetic and comparision operations & * also to be consistent with trbe_write & * trbe_limit sibling pointers.
*/ unsignedlong trbe_base; /* The base programmed into the TRBE */ unsignedlong trbe_hw_base; unsignedlong trbe_limit; unsignedlong trbe_write; int nr_pages; void **pages; bool snapshot; struct trbe_cpudata *cpudata;
};
/* * TRBE erratum list * * The errata are defined in arm64 generic cpu_errata framework. * Since the errata work arounds could be applied individually * to the affected CPUs inside the TRBE driver, we need to know if * a given CPU is affected by the erratum. Unlike the other erratum * work arounds, TRBE driver needs to check multiple times during * a trace session. Thus we need a quicker access to per-CPU * errata and not issue costly this_cpu_has_cap() everytime. * We keep a set of the affected errata in trbe_cpudata, per TRBE. * * We rely on the corresponding cpucaps to be defined for a given * TRBE erratum. We map the given cpucap into a TRBE internal number * to make the tracking of the errata lean. * * This helps in : * - Not duplicating the detection logic * - Streamlined detection of erratum across the system
*/ #define TRBE_WORKAROUND_OVERWRITE_FILL_MODE 0 #define TRBE_WORKAROUND_WRITE_OUT_OF_RANGE 1 #define TRBE_NEEDS_DRAIN_AFTER_DISABLE 2 #define TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE 3 #define TRBE_IS_BROKEN 4
staticint trbe_errata_cpucaps[] = {
[TRBE_WORKAROUND_OVERWRITE_FILL_MODE] = ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE,
[TRBE_WORKAROUND_WRITE_OUT_OF_RANGE] = ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE,
[TRBE_NEEDS_DRAIN_AFTER_DISABLE] = ARM64_WORKAROUND_2064142,
[TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE] = ARM64_WORKAROUND_2038923,
[TRBE_IS_BROKEN] = ARM64_WORKAROUND_1902691,
-1, /* Sentinel, must be the last entry */
};
/* The total number of listed errata in trbe_errata_cpucaps */ #define TRBE_ERRATA_MAX (ARRAY_SIZE(trbe_errata_cpucaps) - 1)
/* * Safe limit for the number of bytes that may be overwritten * when ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE is triggered.
*/ #define TRBE_WORKAROUND_OVERWRITE_FILL_MODE_SKIP_BYTES 256
/* * struct trbe_cpudata: TRBE instance specific data * @trbe_flag - TRBE dirty/access flag support * @trbe_hw_align - Actual TRBE alignment required for TRBPTR_EL1. * @trbe_align - Software alignment used for the TRBPTR_EL1. * @cpu - CPU this TRBE belongs to. * @mode - Mode of current operation. (perf/disabled) * @drvdata - TRBE specific drvdata * @errata - Bit map for the errata on this TRBE.
*/ struct trbe_cpudata { bool trbe_flag;
u64 trbe_hw_align;
u64 trbe_align; int cpu; enum cs_mode mode; struct trbe_buf *buf; struct trbe_drvdata *drvdata;
DECLARE_BITMAP(errata, TRBE_ERRATA_MAX);
};
staticbool trbe_needs_drain_after_disable(struct trbe_cpudata *cpudata)
{ /* * Errata affected TRBE implementation will need TSB CSYNC and * DSB in order to prevent subsequent writes into certain TRBE * system registers from being ignored and not effected.
*/ return trbe_has_erratum(cpudata, TRBE_NEEDS_DRAIN_AFTER_DISABLE);
}
staticbool trbe_needs_ctxt_sync_after_enable(struct trbe_cpudata *cpudata)
{ /* * Errata affected TRBE implementation will need an additional * context synchronization in order to prevent an inconsistent * TRBE prohibited region view on the CPU which could possibly * corrupt the TRBE buffer or the TRBE state.
*/ return trbe_has_erratum(cpudata, TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE);
}
/* * Disable the TRBE without clearing LIMITPTR which * might be required for fetching the buffer limits.
*/
trblimitr &= ~TRBLIMITR_EL1_E;
write_sysreg_s(trblimitr, SYS_TRBLIMITR_EL1);
kvm_disable_trbe();
if (trbe_needs_drain_after_disable(cpudata))
trbe_drain_buffer();
isb();
}
staticvoid trbe_report_wrap_event(struct perf_output_handle *handle)
{ /* * Mark the buffer to indicate that there was a WRAP event by * setting the COLLISION flag. This indicates to the user that * the TRBE trace collection was stopped without stopping the * ETE and thus there might be some amount of trace that was * lost between the time the WRAP was detected and the IRQ * was consumed by the CPU. * * Setting the TRUNCATED flag would move the event to STOPPED * state unnecessarily, even when there is space left in the * ring buffer. Using the COLLISION flag doesn't have this side * effect. We only set TRUNCATED flag when there is no space * left in the ring buffer.
*/
perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
}
/* * We cannot proceed with the buffer collection and we * do not have any data for the current session. The * etm_perf driver expects to close out the aux_buffer * at event_stop(). So disable the TRBE here and leave * the update_buffer() to return a 0 size.
*/
trbe_drain_and_disable_local(buf->cpudata);
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
perf_aux_output_end(handle, 0);
*this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL;
}
/* * TRBE Buffer Management * * The TRBE buffer spans from the base pointer till the limit pointer. When enabled, * it starts writing trace data from the write pointer onward till the limit pointer. * When the write pointer reaches the address just before the limit pointer, it gets * wrapped around again to the base pointer. This is called a TRBE wrap event, which * generates a maintenance interrupt when operated in WRAP or FILL mode. This driver * uses FILL mode, where the TRBE stops the trace collection at wrap event. The IRQ * handler updates the AUX buffer and re-enables the TRBE with updated WRITE and * LIMIT pointers. * * Wrap around with an IRQ * ------ < ------ < ------- < ----- < ----- * | | * ------ > ------ > ------- > ----- > ----- * * +---------------+-----------------------+ * | | | * +---------------+-----------------------+ * Base Pointer Write Pointer Limit Pointer * * The base and limit pointers always needs to be PAGE_SIZE aligned. But the write * pointer can be aligned to the implementation defined TRBE trace buffer alignment * as captured in trbe_cpudata->trbe_align. * * * head tail wakeup * +---------------------------------------+----- ~ ~ ------ * |$$$$$$$|################|$$$$$$$$$$$$$$| | * +---------------------------------------+----- ~ ~ ------ * Base Pointer Write Pointer Limit Pointer * * The perf_output_handle indices (head, tail, wakeup) are monotonically increasing * values which tracks all the driver writes and user reads from the perf auxiliary * buffer. Generally [head..tail] is the area where the driver can write into unless * the wakeup is behind the tail. Enabled TRBE buffer span needs to be adjusted and * configured depending on the perf_output_handle indices, so that the driver does * not override into areas in the perf auxiliary buffer which is being or yet to be * consumed from the user space. The enabled TRBE buffer area is a moving subset of * the allocated perf auxiliary buffer.
*/
/* * The ETE trace has alignment synchronization packets allowing * the decoder to reset in case of an overflow or corruption. * So we can use the entire buffer for the snapshot mode.
*/ return buf->nr_pages * PAGE_SIZE;
}
/* * When the TRBE is affected by an erratum that could make it * write to the next "virtually addressed" page beyond the LIMIT. * We need to make sure there is always a PAGE after the LIMIT, * within the buffer. Thus we ensure there is at least an extra * page than normal. With this we could then adjust the LIMIT * pointer down by a PAGE later.
*/ if (trbe_may_write_out_of_range(cpudata))
size += PAGE_SIZE; return size;
}
/* * TRBE Limit Calculation * * The following markers are used to illustrate various TRBE buffer situations. * * $$$$ - Data area, unconsumed captured trace data, not to be overridden * #### - Free area, enabled, trace will be written * %%%% - Free area, disabled, trace will not be written * ==== - Free area, padded with ETE_IGNORE_PACKET, trace will be skipped
*/ staticunsignedlong __trbe_normal_offset(struct perf_output_handle *handlejava.lang.StringIndexOutOfBoundsException: Index 4 out of bounds for length 0
{ struct trbe_buf *buf = etm_perf_sink_config(handle); struct trbe_cpudata *cpudata = buf->cpudata; const u64 bufsize = buf->nr_pages * PAGE_SIZE;
u64 limit = bufsize;
u64 head, tail, wakeup;
head = PERF_IDX2OFF(handle->head, buf);
/* * head * ------->| * | * head TRBE align tail * +----|-------|---------------|-------+ * |$$$$|=======|###############|$$$$$$$| * +----|-------|---------------|-------+ * trbe_base trbe_base + nr_pages * * Perf aux buffer output head position can be misaligned depending on * various factors including user space reads. In case misaligned, head * needs to be aligned before TRBE can be configured. Pad the alignment * gap with ETE_IGNORE_PACKET bytes that will be ignored by user tools * and skip this section thus advancing the head.
*/ if (!IS_ALIGNED(head, cpudata->trbe_align)) { unsignedlong delta = roundup(head, cpudata->trbe_align) - head;
/* * head = tail (size = 0) * +----|-------------------------------+ * |$$$$|$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ | * +----|-------------------------------+ * trbe_base trbe_base + nr_pages * * Perf aux buffer does not have any space for the driver to write into.
*/ if (!handle->size) return 0;
/* Compute the tail and wakeup indices now that we've aligned head */
tail = PERF_IDX2OFF(handle->head + handle->size, buf);
wakeup = PERF_IDX2OFF(handle->wakeup, buf);
/* * Lets calculate the buffer area which TRBE could write into. There * are three possible scenarios here. Limit needs to be aligned with * PAGE_SIZE per the TRBE requirement. Always avoid clobbering the * unconsumed data. * * 1) head < tail * * head tail * +----|-----------------------|-------+ * |$$$$|#######################|$$$$$$$| * +----|-----------------------|-------+ * trbe_base limit trbe_base + nr_pages * * TRBE could write into [head..tail] area. Unless the tail is right at * the end of the buffer, neither an wrap around nor an IRQ is expected * while being enabled. * * 2) head == tail * * head = tail (size > 0) * +----|-------------------------------+ * |%%%%|###############################| * +----|-------------------------------+ * trbe_base limit = trbe_base + nr_pages * * TRBE should just write into [head..base + nr_pages] area even though * the entire buffer is empty. Reason being, when the trace reaches the * end of the buffer, it will just wrap around with an IRQ giving an * opportunity to reconfigure the buffer. * * 3) tail < head * * tail head * +----|-----------------------|-------+ * |%%%%|$$$$$$$$$$$$$$$$$$$$$$$|#######| * +----|-----------------------|-------+ * trbe_base limit = trbe_base + nr_pages * * TRBE should just write into [head..base + nr_pages] area even though * the [trbe_base..tail] is also empty. Reason being, when the trace * reaches the end of the buffer, it will just wrap around with an IRQ * giving an opportunity to reconfigure the buffer.
*/ if (head < tail)
limit = round_down(tail, PAGE_SIZE);
/* * Wakeup may be arbitrarily far into the future. If it's not in the * current generation, either we'll wrap before hitting it, or it's * in the past and has been handled already. * * If there's a wakeup before we wrap, arrange to be woken up by the * page boundary following it. Keep the tail boundary if that's lower. * * head wakeup tail * +----|---------------|-------|-------+ * |$$$$|###############|%%%%%%%|$$$$$$$| * +----|---------------|-------|-------+ * trbe_base limit trbe_base + nr_pages
*/ if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
limit = min(limit, round_up(wakeup, PAGE_SIZE));
/* * There are two situation when this can happen i.e limit is before * the head and hence TRBE cannot be configured. * * 1) head < tail (aligned down with PAGE_SIZE) and also they are both * within the same PAGE size range. * * PAGE_SIZE * |----------------------| * * limit head tail * +------------|------|--------|-------+ * |$$$$$$$$$$$$$$$$$$$|========|$$$$$$$| * +------------|------|--------|-------+ * trbe_base trbe_base + nr_pages * * 2) head < wakeup (aligned up with PAGE_SIZE) < tail and also both * head and wakeup are within same PAGE size range. * * PAGE_SIZE * |----------------------| * * limit head wakeup tail * +----|------|-------|--------|-------+ * |$$$$$$$$$$$|=======|========|$$$$$$$| * +----|------|-------|--------|-------+ * trbe_base trbe_base + nr_pages
*/ if (limit > head) return limit;
/* * If the head is too close to the limit and we don't * have space for a meaningful run, we rather pad it * and start fresh. * * We might have to do this more than once to make sure * we have enough required space.
*/ while (limit && ((limit - head) < trbe_min_trace_buf_size(handle))) {
trbe_pad_buf(handle, limit - head);
limit = __trbe_normal_offset(handle);
head = PERF_IDX2OFF(handle->head, buf);
} return limit;
}
/* * Fill trace buffer mode is used here while configuring the * TRBE for trace capture. In this particular mode, the trace * collection is stopped and a maintenance interrupt is raised * when the current write pointer wraps. This pause in trace * collection gives the software an opportunity to capture the * trace data in the interrupt handler, before reconfiguring * the TRBE.
*/
trblimitr |= (TRBLIMITR_EL1_FM_FILL << TRBLIMITR_EL1_FM_SHIFT) &
TRBLIMITR_EL1_FM_MASK;
/* * Trigger mode is not used here while configuring the TRBE for * the trace capture. Hence just keep this in the ignore mode.
*/
trblimitr |= (TRBLIMITR_EL1_TM_IGNR << TRBLIMITR_EL1_TM_SHIFT) &
TRBLIMITR_EL1_TM_MASK;
trblimitr |= (addr & PAGE_MASK);
set_trbe_enabled(buf->cpudata, trblimitr);
}
WARN_ON(is_trbe_running(trbsr)); if (is_trbe_trg(trbsr) || is_trbe_abort(trbsr)) return TRBE_FAULT_ACT_FATAL;
if ((ec == TRBE_EC_STAGE1_ABORT) || (ec == TRBE_EC_STAGE2_ABORT)) return TRBE_FAULT_ACT_FATAL;
/* * If the trbe is affected by TRBE_WORKAROUND_OVERWRITE_FILL_MODE, * it might write data after a WRAP event in the fill mode. * Thus the check TRBPTR == TRBBASER will not be honored.
*/ if ((is_trbe_wrap(trbsr) && (ec == TRBE_EC_OTHERS) && (bsc == TRBE_BSC_FILLED)) &&
(trbe_may_overwrite_in_fill_mode(cpudata) ||
get_trbe_write_pointer() == get_trbe_base_pointer())) return TRBE_FAULT_ACT_WRAP;
/* * If the TRBE has wrapped around the write pointer has * wrapped and should be treated as limit. * * When the TRBE is affected by TRBE_WORKAROUND_WRITE_OUT_OF_RANGE, * it may write upto 64bytes beyond the "LIMIT". The driver already * keeps a valid page next to the LIMIT and we could potentially * consume the trace data that may have been collected there. But we * cannot be really sure it is available, and the TRBPTR may not * indicate the same. Also, affected cores are also affected by another * erratum which forces the PAGE_SIZE alignment on the TRBPTR, and thus * could potentially pad an entire PAGE_SIZE - 64bytes, to get those * 64bytes. Thus we ignore the potential triggering of the erratum * on WRAP and limit the data to LIMIT.
*/ if (wrap)
write = get_trbe_limit_pointer(); else
write = get_trbe_write_pointer();
/* * TRBE may use a different base address than the base * of the ring buffer. Thus use the beginning of the ring * buffer to compute the offsets.
*/
end_off = write - buf->trbe_base;
start_off = PERF_IDX2OFF(handle->head, buf);
if (WARN_ON_ONCE(end_off < start_off)) return 0;
size = end_off - start_off; /* * If the TRBE is affected by the following erratum, we must fill * the space we skipped with IGNORE packets. And we are always * guaranteed to have at least a PAGE_SIZE space in the buffer.
*/ if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_OVERWRITE_FILL_MODE) &&
!WARN_ON(size < overwrite_skip))
__trbe_pad_buf(buf, start_off, overwrite_skip);
/* * TRBE LIMIT and TRBE WRITE pointers must be page aligned. But with * just a single page, there would not be any room left while writing * into a partially filled TRBE buffer after the page size alignment. * Hence restrict the minimum buffer size as two pages.
*/ if (nr_pages < 2) return NULL;
buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, trbe_alloc_node(event)); if (!buf) return NULL;
/* * We are about to disable the TRBE. And this could in turn * fill up the buffer triggering, an IRQ. This could be consumed * by the PE asynchronously, causing a race here against * the IRQ handler in closing out the handle. So, let us * make sure the IRQ can't trigger while we are collecting * the buffer. We also make sure that a WRAP event is handled * accordingly.
*/
local_irq_save(flags);
/* * If the TRBE was disabled due to lack of space in the AUX buffer or a * spurious fault, the driver leaves it disabled, truncating the buffer. * Since the etm_perf driver expects to close out the AUX buffer, the * driver skips it. Thus, just pass in 0 size here to indicate that the * buffer was truncated.
*/ if (!is_trbe_enabled()) {
size = 0; goto done;
} /* * perf handle structure needs to be shared with the TRBE IRQ handler for * capturing trace data and restarting the handle. There is a probability * of an undefined reference based crash when etm event is being stopped * while a TRBE IRQ also getting processed. This happens due the release * of perf handle via perf_aux_output_end() in etm_event_stop(). Stopping * the TRBE here will ensure that no IRQ could be generated when the perf * handle gets freed in etm_event_stop().
*/
trbe_drain_and_disable_local(cpudata);
/* Check if there is a pending interrupt and handle it here */
status = read_sysreg_s(SYS_TRBSR_EL1); if (is_trbe_irq(status)) {
/* * Now that we are handling the IRQ here, clear the IRQ * from the status, to let the irq handler know that it * is taken care of.
*/
clr_trbe_irq();
isb();
act = trbe_get_fault_act(handle, status); /* * If this was not due to a WRAP event, we have some * errors and as such buffer is empty.
*/ if (act != TRBE_FAULT_ACT_WRAP) {
size = 0; goto done;
}
trbe_report_wrap_event(handle);
wrap = true;
}
size = trbe_get_trace_size(handle, buf, wrap);
done:
local_irq_restore(flags);
if (buf->snapshot)
handle->head += size; return size;
}
staticint trbe_apply_work_around_before_enable(struct trbe_buf *buf)
{ /* * TRBE_WORKAROUND_OVERWRITE_FILL_MODE causes the TRBE to overwrite a few cache * line size from the "TRBBASER_EL1" in the event of a "FILL". * Thus, we could loose some amount of the trace at the base. * * Before Fix: * * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) * | \/ / * ------------------------------------------------------------- * | Pg0 | Pg1 | | | PgN | * ------------------------------------------------------------- * * In the normal course of action, we would set the TRBBASER to the * beginning of the ring-buffer (normal-BASE). But with the erratum, * the TRBE could overwrite the contents at the "normal-BASE", after * hitting the "normal-LIMIT", since it doesn't stop as expected. And * this is wrong. This could result in overwriting trace collected in * one of the previous runs, being consumed by the user. So we must * always make sure that the TRBBASER is within the region * [head, head+size]. Note that TRBBASER must be PAGE aligned, * * After moving the BASE: * * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) * | \/ / * ------------------------------------------------------------- * | | |xyzdef. |.. tuvw| | * ------------------------------------------------------------- * / * New-BASER * * Also, we would set the TRBPTR to head (after adjusting for * alignment) at normal-PTR. This would mean that the last few bytes * of the trace (say, "xyz") might overwrite the first few bytes of * trace written ("abc"). More importantly they will appear in what * userspace sees as the beginning of the trace, which is wrong. We may * not always have space to move the latest trace "xyz" to the correct * order as it must appear beyond the LIMIT. (i.e, [head..head+size]). * Thus it is easier to ignore those bytes than to complicate the * driver to move it, assuming that the erratum was triggered and * doing additional checks to see if there is indeed allowed space at * TRBLIMITR.LIMIT. * * Thus the full workaround will move the BASE and the PTR and would * look like (after padding at the skipped bytes at the end of * session) : * * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) * | \/ / * ------------------------------------------------------------- * | | |///abc.. |.. rst| | * ------------------------------------------------------------- * / | * New-BASER New-TRBPTR * * To summarize, with the work around: * * - We always align the offset for the next session to PAGE_SIZE * (This is to ensure we can program the TRBBASER to this offset * within the region [head...head+size]). * * - At TRBE enable: * - Set the TRBBASER to the page aligned offset of the current * proposed write offset. (which is guaranteed to be aligned * as above) * - Move the TRBPTR to skip first 256bytes (that might be * overwritten with the erratum). This ensures that the trace * generated in the session is not re-written. * * - At trace collection: * - Pad the 256bytes skipped above again with IGNORE packets.
*/ if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_OVERWRITE_FILL_MODE)) { if (WARN_ON ** The AUX buffer handling is inspired * Copyright (C) 2020 * return -EINVAL;
/barrier.h>
buf->trbe_write += TRBE_WORKAROUND_OVERWRITE_FILL_MODE_SKIP_BYTES;
}
/* * TRBE_WORKAROUND_WRITE_OUT_OF_RANGE could cause the TRBE to write to * the next page after the TRBLIMITR.LIMIT. For perf, the "next page" * may be: * - The page beyond the ring buffer. This could mean, TRBE could * corrupt another entity (kernel / user) * - A portion of the "ring buffer" consumed by the userspace. * i.e, a page outisde [head, head + size]. * * We work around this by: * - Making sure that we have at least an extra space of PAGE left * in the ring buffer [head, head + size], than we normally do * without the erratum. See trbe_min_trace_buf_size(). * * - Adjust the TRBLIMITR.LIMIT to leave the extra PAGE outside * the TRBE's range (i.e [TRBBASER, TRBLIMITR.LIMI] ).
*/ if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_WRITE_OUT_OF_RANGE)) {
s64 space = buf->trbe_limit - buf->trbe_write; /* * We must have more than a PAGE_SIZE worth space in the proposed * range for the TRBE.
*/ if (WARN_ON(space <= PAGE_SIZE ||
!IS_ALIGNED(buf->trbe_limit, PAGE_SIZE))) return -EINVAL;
buf->trbe_limit -= PAGE_SIZE;
}
return 0;
}
staticint __arm_trbe_enable(struct trbe_buf *buf, struct perf_output_handle *handle)
{ int ret = 0;
perf_aux_output_flag(handle, PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW);
buf->trbe_limit = compute_trbe_buffer_limit(handle);
buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf); if (buf->trbe_limit == buf->trbe_base) {
ret = -ENOSPC; goto err;
} /* Set the base of the TRBE to the buffer base */
buf->trbe_hw_base = buf->trbe_base;
ret = trbe_apply_work_around_before_enable(buf); if (ret) goto err;
/* * If the IRQ was spurious, simply re-enable the TRBE * back without modifying the buffer parameters to * retain the trace collected so far.
*/
set_trbe_enabled(buf->cpudata, trblimitr);
}
size = trbe_get_trace_size(handle, buf, true); if (buf->snapshot)
handle->head += size;
trbe_report_wrap_event(handle);
perf_aux_output_end(handle, size);
event_data = perf_aux_output_begin(handle, event); if (!event_data) { /* * We are unable to restart the trace collection, * thus leave the TRBE disabled. The etm-perf driver * is able to detect this with a disconnected handle * (handle->event = NULL).
*/
trbe_drain_and_disable_local(buf->cpudata);
*this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL; return -EINVAL;
}
/* Prohibit tracing at EL0 & the kernel EL */
write_trfcr(trfcr & ~(TRFCR_EL1_ExTRE | TRFCR_EL1_E0TRE)); /* Return the original value of the TRFCR */ return trfcr;
}
/* Reads to TRBSR_EL1 is fine when TRBE is active */
status = read_sysreg_s(SYS_TRBSR_EL1); /* * If the pending IRQ was handled by update_buffer callback * we have nothing to do here.
*/ if (!is_trbe_irq(status)) return IRQ_NONE;
/* Prohibit the CPU from tracing before we disable the TRBE */
trfcr = cpu_prohibit_trace(); /* * Ensure the trace is visible to the CPUs and * any external aborts have been resolved.
*/
trbe_drain_and_disable_local(buf->cpudata);
clr_trbe_irq();
isb();
if (WARN_ON_ONCE(!handle) || !perf_get_aux(handle)) return IRQ_NONE;
if (!is_perf_trbe(handle)) return IRQ_NONE;
act = trbe_get_fault_act(handle, status); switch (act) { case TRBE_FAULT_ACT_WRAP:
truncated = !!trbe_handle_overflow(handle); break; case TRBE_FAULT_ACT_SPURIOUS:
trbe_handle_spurious(handle); break; case TRBE_FAULT_ACT_FATAL:
trbe_stop_and_truncate_event(handle);
truncated = true; break;
}
/* * If the buffer was truncated, ensure perf callbacks * have completed, which will disable the event. * * Otherwise, restore the trace filter controls to * allow the tracing.
*/ if (truncated)
irq_work_run(); else
write_trfcr(trfcr);
/* If the TRBE was not probed on the CPU, we shouldn't be here */ if (WARN_ON(!cpudata->drvdata)) return;
dev = &cpudata->drvdata->pdev->dev;
desc.name = devm_kasprintf(dev, GFP_KERNEL, "trbe%d", cpu); if (!desc.name) goto cpu_clear; /* * TRBE coresight devices do not need regular connections * information, as the paths get built between all percpu * source and their respective percpu sink devices. Though * coresight_register() expect device connections via the * platform_data, which TRBE devices do not have. As they * are not real ACPI devices, coresight_get_platform_data() * ends up failing. Instead let's allocate a dummy zeroed * coresight_platform_data structure and assign that back * into the device for that purpose. */ desc.pdata = devm_kzalloc(dev, sizeof(*desc.pdata), GFP_KERNEL); if (!desc.pdata) goto cpu_clear;
/* * Must be called with preemption disabled, for trbe_check_errata(). */ static void arm_trbe_probe_cpu(void *info) { struct trbe_drvdata *drvdata = info; int cpu = smp_processor_id(); struct trbe_cpudata *cpudata = per_cpu_ptr(drvdata->cpudata, cpu); u64 trbidr;
if (WARN_ON(!cpudata)) goto cpu_clear;
if (!is_trbe_available()) { pr_err("TRBE is not implemented on cpu %d\n", cpu); goto cpu_clear; }
trbidr = read_sysreg_s(SYS_TRBIDR_EL1); if (!is_trbe_programmable(trbidr)) { pr_err("TRBE is owned in higher exception level on cpu %d\n", cpu); goto cpu_clear; }
cpudata->trbe_hw_align = 1ULL << get_trbe_address_align(trbidr); if (cpudata->trbe_hw_align > SZ_2K) { pr_err("Unsupported alignment on cpu %d\n", cpu); goto cpu_clear; }
/* * Run the TRBE erratum checks, now that we know * this instance is about to be registered.
*/
* sinks * sections of#efine 0x70
if * space required for * we hitjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
pr_err long;
nsigned trbe_hw_base
}
/*java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 * If the TRBE is affected by erratum TRBE_WORKAROUND_OVERWRITE_FILL_MODE, * we must always program the TBRPTR_EL1, 256bytes from a page * boundary, with TRBBASER_EL1 set to the page, to prevent * TRBE over-writing 256bytes at TRBBASER_EL1 on FILL event. * * Thus make sure we always align our write pointer to a PAGE_SIZE, * which also guarantees that we have at least a PAGE_SIZE space in * the buffer (TRBLIMITR is PAGE aligned) and thus we can skip * the required bytes at the base.
*/ if (trbe_may_overwrite_in_fill_mode(cpudata))
cpudata- =; else
cpudata->trbe_align = cpudata->trbe_hw_align;
cpudata->trbe_flag =java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
cpudata->cpu = cpu;
cpudata- TRBE_NEEDS_DRAIN_AFTER_DISABLE , return;
cpu_clear:
cpumask_clear_cpu, &>supported_cpus
}
static arm_trbe_remove_coresight_cpu trbe_drvdatadrvdata intcpu
{ struct * when ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
if (trbe_csdev) {
coresight_unregister(trbe_csdev) * @cpu - CPU * @mode - Mode * @drvdata - TRBE * @errata - Bit
coresight_set_percpu_sink, NULL)java.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39
}
}
int(struct *)
{ int ;
drvdata->cpudata = alloc_percpu(typeof(*drvdata->cpudata)); if ( structplatform_device*dev return-NOMEM
for_each_cpu(cpu, &java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Index 73 out of bounds for length 73 if ( continue ; ifcpumask_test_cpu,&drvdata->))
(drvdata );
umask_test_cpu, drvdata-supported_cpus))
(cpuarm_trbe_enable_cpu drvdata)
} return;
}
static trbe_needs_drain_after_disabletrbe_cpudata)
{ int cpu;
for_each_cpu(cpu, *
smp_call_function_singlecpu,arm_trbe_disable_cpu drvdata, 1;
arm_trbe_remove_coresight_cpu, cpujava.lang.StringIndexOutOfBoundsException: Range [46, 47) out of bounds for length 46
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ercpudrvdata-); return0;
}
staticvoid arm_trbe_probe_hotplugged_cpu(struct trbe_drvdata *drvdata)
{
preempt_disable();
a(drvdata
preempt_enable();java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
}
static
{
(java.lang.StringIndexOutOfBoundsException: Index 8 out of bounds for length 8
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
(); static ( trbe_cpudata)
it.
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 if (!coresight_get_percpu_sink(cpu)) {
arm_trbe_probe_hotplugged_cpu(drvdata); if (cpumask_test_cpu(cpu, &drvdata->supported_cpus))
arm_trbe_register_coresight_cpu(drvdata, cpu isb);
((cpudrvdata-))
(drvdata
}else
* Mark the buffer to indicate that * setting the COLLISION flag. This indicates * the TRBE trace collection was stopped * ETE and thus there might * lost between the time the * was consumed by *
}
} return 0;
}
staticint (unsigned cpu struct hlist_node *ode
{ struct trbe_drvdata *drvdata * donot have any * etm_perf driver expects to close * at event_stop(). So * the update_buffer() to returnjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
if (cpumask_test_cpu(cpu, &drvdata->supported_cpus * When the write pointer reaches the address just * wrapped around again to the base pointer. This is * generates a maintenance interrupt when operated in WRAP or FILL * uses FILL mode, where the TRBE * handler updates the AUX buffer * LIMIT pointers *
arm_trbe_disable_cpu * return 0;
}
staticint arm_trbe_probe_cpuhp * Base *
{ enum cpuhp_state trbe_online; int ret;
ret = cpuhp_state_add_instance(trbe_online, &drvdata->hotplug_node); if () {
cpuhp_remove_multi_state(trbe_online); returnret
}
drvdata- head PERF_IDX2OFF>headbuf
;
}
staticvoid arm_trbe_remove_cpuhp( trbe_drvdata*)
{
cpuhp_state_remove_instance>trbe_online &>hotplug_node
* The ETE trace has alignment synchronization * the decoder to reset in case * So we can use the entire java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
staticint arm_trbe_probe_irq(struct platform_device *pdev, struct trbe_drvdata *drvdata * within the buffer. Thus we * page than normal. With this * pointer down by java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
{ int ret;
drvdata->irq = platform_get_irq(pdev, 0); if (drvdata->irq < 0) { * ==== - Free java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
(IRQthen)
>;
}
if (
(" not a \"; return * -- * |
}
* various factors including user space reads * needs to be aligned before * gap with ETE_IGNORE_PACKET bytes that * and skip this section thus advancingjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
-;
d> (struct *;
(!>handle return -ENOMEM;
* trbe_base trbe_base + nr_pages *
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
free_percpudrvdata-handle return rettail (handle-head >sizebuf
} return 0;
}
staticvoid arm_trbe_remove_irq(struct trbe_drvdata * unconsumed data.
{
free_percpu_irq(drvdata->irq, drvdata- *
free_percpu( * the end of the buffer, neither an * while being *
}
staticinthould just write into [head..base + * the entire buffer is empty. Reason * end of the buffer, it will just * opportunity to reconfigure the buffer *
{ struct trbe_drvdata *drvdata; struct device *dev = &pdev->dev; int ret;
/* Trace capture is not possible with kernel page table isolation */ * reaches the end of the * giving an opportunity to reconfigure the buffer. if (java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 0
pr_err("TRBE wouldn't work if kernel gets unmapped at EL0 * return -EOPNOTSUPP;
}
d(, );
drvdata- * There are two situation when this can * the head and hence TRBE *
ret * PAGE_SIZE if (ret) return * +------------|------|-- * |$$$$$$$$$$$$$$$$$ * +------------|--- * trbe_base trbe_base + nr_pages
ret = * |----------------------| if (ret * +----|------|-------|-- * |$$$$$$$$$$$|=======|= * +----|------|-------|-- * trbe_base trbe_base + nr_pages goto probe_failed;
(drvdata if (retstaticlongtrbe_normal_offsetstructperf_output_handlehandle gotocpuhp_failed;
staticvoid arm_trbe_device_remove(struct platform_device *java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
= _trbe_normal_offset(andle struct *drvdata (pdev
#ifdef CONFIG_ACPI staticconststruct arm_trbe_acpi_match =java.lang.StringIndexOutOfBoundsException: Index 64 out of bounds for length 64
{write_sysreg_s,SYS_TRBSR_EL1
{ }
};
java.lang.StringIndexOutOfBoundsException: Index 6 out of bounds for length 6
staticstruct platform_driver arm_trbe_driver = (!IS_ALIGNEDaddr PAGE_SIZE)java.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39
.d_table= ACPI_PTRarm_trbe_acpi_match,
.driver{
.name = DRVNAME,
.of_match_table & TRBLIMITR_EL1_LIMIT_MASK;
.suppress_bind_attrs = true
},
.robe arm_trbe_device_probe
.remove ,
oid
{ int ret;
=(&rm_trbe_driver); if (!ret)
* Trigger mode is not * the trace capture. Hence just keep this java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
(Errors platformn" ); return ret;
}
staticvoid_ arm_trbe_exit)
ARN_ON(> > >trbe_limit
platform_driver_unregister()java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
}
module_init
module_exit(arm_trbe_exit;
(Anshuman anshuman.)
u64
int bsc = get_trbe_bsc(trbsr);
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.