Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/media/usb/dvb-usb/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 5 kB image not shown  

Quelle  cinergyT2-core.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
 *
 * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
 *
 * Based on the dvb-usb-framework code and the
 * original Terratec Cinergy T2 driver by:
 *
 * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
 *     Holger Waechtler <holger@qanu.de>
 *
 *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
 */


#include "cinergyT2.h"


/* debug */
int dvb_usb_cinergyt2_debug;

module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 (or-able)).");

DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);

struct cinergyt2_state {
 u8 rc_counter;
 unsigned char data[64];
};

/* Forward declaration */
static const struct dvb_usb_device_properties cinergyt2_properties;

static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
{
 struct dvb_usb_device *d = adap->dev;
 struct cinergyt2_state *st = d->priv;
 int ret;

 mutex_lock(&d->data_mutex);
 st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
 st->data[1] = enable ? 1 : 0;

 ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
 mutex_unlock(&d->data_mutex);

 return ret;
}

static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
{
 struct cinergyt2_state *st = d->priv;
 int ret;

 mutex_lock(&d->data_mutex);
 st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
 st->data[1] = enable ? 0 : 1;

 ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
 mutex_unlock(&d->data_mutex);

 return ret;
}

static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
{
 struct dvb_usb_device *d = adap->dev;
 struct cinergyt2_state *st = d->priv;
 int ret;

 adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);

 mutex_lock(&d->data_mutex);
 st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;

 ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 if (ret < 0) {
  if (adap->fe_adap[0].fe)
   adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe);
  deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
 }
 mutex_unlock(&d->data_mutex);

 return ret;
}

static struct rc_map_table rc_map_cinergyt2_table[] = {
 { 0x0401, KEY_POWER },
 { 0x0402, KEY_1 },
 { 0x0403, KEY_2 },
 { 0x0404, KEY_3 },
 { 0x0405, KEY_4 },
 { 0x0406, KEY_5 },
 { 0x0407, KEY_6 },
 { 0x0408, KEY_7 },
 { 0x0409, KEY_8 },
 { 0x040a, KEY_9 },
 { 0x040c, KEY_0 },
 { 0x040b, KEY_VIDEO },
 { 0x040d, KEY_REFRESH },
 { 0x040e, KEY_SELECT },
 { 0x040f, KEY_EPG },
 { 0x0410, KEY_UP },
 { 0x0414, KEY_DOWN },
 { 0x0411, KEY_LEFT },
 { 0x0413, KEY_RIGHT },
 { 0x0412, KEY_OK },
 { 0x0415, KEY_TEXT },
 { 0x0416, KEY_INFO },
 { 0x0417, KEY_RED },
 { 0x0418, KEY_GREEN },
 { 0x0419, KEY_YELLOW },
 { 0x041a, KEY_BLUE },
 { 0x041c, KEY_VOLUMEUP },
 { 0x041e, KEY_VOLUMEDOWN },
 { 0x041d, KEY_MUTE },
 { 0x041b, KEY_CHANNELUP },
 { 0x041f, KEY_CHANNELDOWN },
 { 0x0440, KEY_PAUSE },
 { 0x044c, KEY_PLAY },
 { 0x0458, KEY_RECORD },
 { 0x0454, KEY_PREVIOUS },
 { 0x0448, KEY_STOP },
 { 0x045c, KEY_NEXT }
};

/* Number of keypresses to ignore before detect repeating */
#define RC_REPEAT_DELAY 3

static int repeatable_keys[] = {
 KEY_UP,
 KEY_DOWN,
 KEY_LEFT,
 KEY_RIGHT,
 KEY_VOLUMEUP,
 KEY_VOLUMEDOWN,
 KEY_CHANNELUP,
 KEY_CHANNELDOWN
};

static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
 struct cinergyt2_state *st = d->priv;
 int i, ret;

 *state = REMOTE_NO_KEY_PRESSED;

 mutex_lock(&d->data_mutex);
 st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;

 ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
 if (ret < 0)
  goto ret;

 if (st->data[4] == 0xff) {
  /* key repeat */
  st->rc_counter++;
  if (st->rc_counter > RC_REPEAT_DELAY) {
   for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) {
    if (d->last_event == repeatable_keys[i]) {
     *state = REMOTE_KEY_REPEAT;
     *event = d->last_event;
     deb_rc("repeat key, event %x\n",
         *event);
     goto ret;
    }
   }
   deb_rc("repeated key (non repeatable)\n");
  }
  goto ret;
 }

 /* hack to pass checksum on the custom field */
 st->data[2] = ~st->data[1];
 dvb_usb_nec_rc_key_to_event(d, st->data, event, state);
 if (st->data[0] != 0) {
  if (*event != d->last_event)
   st->rc_counter = 0;

  deb_rc("key: %*ph\n", 5, st->data);
 }

ret:
 mutex_unlock(&d->data_mutex);
 return ret;
}

static int cinergyt2_usb_probe(struct usb_interface *intf,
    const struct usb_device_id *id)
{
 return dvb_usb_device_init(intf, &cinergyt2_properties,
       THIS_MODULE, NULL, adapter_nr);
}

enum {
 TERRATEC_CINERGY_T2,
};

static const struct usb_device_id cinergyt2_usb_table[] = {
 DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T2),
 { }
};

MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table);

static const struct dvb_usb_device_properties cinergyt2_properties = {
 .size_of_priv = sizeof(struct cinergyt2_state),
 .num_adapters = 1,
 .adapter = {
  {
  .num_frontends = 1,
  .fe = {{
   .streaming_ctrl   = cinergyt2_streaming_ctrl,
   .frontend_attach  = cinergyt2_frontend_attach,

   /* parameter for the MPEG2-data transfer */
   .stream = {
    .type = USB_BULK,
    .count = 5,
    .endpoint = 0x02,
    .u = {
     .bulk = {
      .buffersize = 512,
     }
    }
   },
  }},
  }
 },

 .power_ctrl       = cinergyt2_power_ctrl,

 .rc.legacy = {
  .rc_interval      = 50,
  .rc_map_table     = rc_map_cinergyt2_table,
  .rc_map_size      = ARRAY_SIZE(rc_map_cinergyt2_table),
  .rc_query         = cinergyt2_rc_query,
 },

 .generic_bulk_ctrl_endpoint = 1,

 .num_device_descs = 1,
 .devices = {
  { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver",
    .cold_ids = {NULL},
    .warm_ids = { &cinergyt2_usb_table[TERRATEC_CINERGY_T2], NULL },
  },
  { NULL },
 }
};


static struct usb_driver cinergyt2_driver = {
 .name  = "cinergyT2",
 .probe  = cinergyt2_usb_probe,
 .disconnect = dvb_usb_device_exit,
 .id_table = cinergyt2_usb_table
};

module_usb_driver(cinergyt2_driver);

MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tomi Orava");

Messung V0.5
C=99 H=93 G=95

¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.