Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/net/mdio/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  mdio-mux-meson-gxl.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2022 Baylibre, SAS.
 * Author: Jerome Brunet <jbrunet@baylibre.com>
 */


#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mdio-mux.h>
#include <linux/module.h>
#include <linux/platform_device.h>

#define ETH_REG2  0x0
#define  REG2_PHYID  GENMASK(21, 0)
#define   EPHY_GXL_ID  0x110181
#define  REG2_LEDACT  GENMASK(23, 22)
#define  REG2_LEDLINK  GENMASK(25, 24)
#define  REG2_DIV4SEL  BIT(27)
#define  REG2_REVERSED  BIT(28)
#define  REG2_ADCBYPASS  BIT(30)
#define  REG2_CLKINSEL  BIT(31)
#define ETH_REG3  0x4
#define  REG3_ENH  BIT(3)
#define  REG3_CFGMODE  GENMASK(6, 4)
#define  REG3_AUTOMDIX  BIT(7)
#define  REG3_PHYADDR  GENMASK(12, 8)
#define  REG3_PWRUPRST  BIT(21)
#define  REG3_PWRDOWN  BIT(22)
#define  REG3_LEDPOL  BIT(23)
#define  REG3_PHYMDI  BIT(26)
#define  REG3_CLKINEN  BIT(29)
#define  REG3_PHYIP  BIT(30)
#define  REG3_PHYEN  BIT(31)
#define ETH_REG4  0x8
#define  REG4_PWRUPRSTSIG BIT(0)

#define MESON_GXL_MDIO_EXTERNAL_ID 0
#define MESON_GXL_MDIO_INTERNAL_ID 1

struct gxl_mdio_mux {
 void __iomem *regs;
 void *mux_handle;
};

static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
{
 u32 val;

 /* Setup the internal phy */
 val = (REG3_ENH |
        FIELD_PREP(REG3_CFGMODE, 0x7) |
        REG3_AUTOMDIX |
        FIELD_PREP(REG3_PHYADDR, 8) |
        REG3_LEDPOL |
        REG3_PHYMDI |
        REG3_CLKINEN |
        REG3_PHYIP);

 writel(REG4_PWRUPRSTSIG, priv->regs + ETH_REG4);
 writel(val, priv->regs + ETH_REG3);
 mdelay(10);

 /* NOTE: The HW kept the phy id configurable at runtime.
 * The id below is arbitrary. It is the one used in the vendor code.
 * The only constraint is that it must match the one in
 * drivers/net/phy/meson-gxl.c to properly match the PHY.
 */

 writel(REG2_REVERSED | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
        priv->regs + ETH_REG2);

 /* Enable the internal phy */
 val |= REG3_PHYEN;
 writel(val, priv->regs + ETH_REG3);
 writel(0, priv->regs + ETH_REG4);

 /* The phy needs a bit of time to power up */
 mdelay(10);
}

static void gxl_enable_external_mdio(struct gxl_mdio_mux *priv)
{
 /* Reset the mdio bus mux to the external phy */
 writel(0, priv->regs + ETH_REG3);
}

static int gxl_mdio_switch_fn(int current_child, int desired_child,
         void *data)
{
 struct gxl_mdio_mux *priv = dev_get_drvdata(data);

 if (current_child == desired_child)
  return 0;

 switch (desired_child) {
 case MESON_GXL_MDIO_EXTERNAL_ID:
  gxl_enable_external_mdio(priv);
  break;
 case MESON_GXL_MDIO_INTERNAL_ID:
  gxl_enable_internal_mdio(priv);
  break;
 default:
  return -EINVAL;
 }

 return 0;
}

static const struct of_device_id gxl_mdio_mux_match[] = {
 { .compatible = "amlogic,gxl-mdio-mux", },
 {},
};
MODULE_DEVICE_TABLE(of, gxl_mdio_mux_match);

static int gxl_mdio_mux_probe(struct platform_device *pdev)
{
 struct device *dev = &pdev->dev;
 struct gxl_mdio_mux *priv;
 struct clk *rclk;
 int ret;

 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 if (!priv)
  return -ENOMEM;
 platform_set_drvdata(pdev, priv);

 priv->regs = devm_platform_ioremap_resource(pdev, 0);
 if (IS_ERR(priv->regs))
  return PTR_ERR(priv->regs);

 rclk = devm_clk_get_enabled(dev, "ref");
 if (IS_ERR(rclk))
  return dev_err_probe(dev, PTR_ERR(rclk),
         "failed to get reference clock\n");

 ret = mdio_mux_init(dev, dev->of_node, gxl_mdio_switch_fn,
       &priv->mux_handle, dev, NULL);
 if (ret)
  dev_err_probe(dev, ret, "mdio multiplexer init failed\n");

 return ret;
}

static void gxl_mdio_mux_remove(struct platform_device *pdev)
{
 struct gxl_mdio_mux *priv = platform_get_drvdata(pdev);

 mdio_mux_uninit(priv->mux_handle);
}

static struct platform_driver gxl_mdio_mux_driver = {
 .probe  = gxl_mdio_mux_probe,
 .remove  = gxl_mdio_mux_remove,
 .driver  = {
  .name = "gxl-mdio-mux",
  .of_match_table = gxl_mdio_mux_match,
 },
};
module_platform_driver(gxl_mdio_mux_driver);

MODULE_DESCRIPTION("Amlogic GXL MDIO multiplexer driver");
MODULE_AUTHOR("Jerome Brunet ");
MODULE_LICENSE("GPL");

Messung V0.5
C=90 H=89 G=89

¤ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.