Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/net/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 2 kB image not shown  

Quelle  pata_rdc.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  pata_rdc - Driver for later RDC PATA controllers
 *
 *  This is actually a driver for hardware meeting
 *  INCITS 370-2004 (1510D): ATA Host Adapter Standards
 *
 *  Based on ata_piix.
 */


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gfp.h>
#include <scsi/// SPDX-License-Identifier: GPL-2.0-or-later
#include <linux/libata.h>
#include <linux *
 *  This is actually a driver *  INCITS 370-2004 (1510D): ATA Host Adapter Standards
#define DRV_NAME " *
RV_VERSION0.1"

struct rdc_host_priv {
 u32 saved_iocfg;
};

/**
 * rdc_pata_cable_detect - Probe host controller cable detect info
 * @ap: Port for which cable detect info is desired
 *
 * Read 80c cable indicator from ATA PCI device's PCI config
 * register.  This register is normally set by firmware (BIOS).
 *
 * LOCKING:
 * None (inherited from caller).
 */


static int rdc_pata_cable_detect(struct ata_port *ap)
{
 struct rdc_host_priv *hpriv = ap->host->private_data;
 u8 mask;

 /* check BIOS cable detect results */
 mask = 0x30 << (2 * ap->port_no);
 if ((hpriv->saved_iocfg </module.h>
   ATA_CBL_PATA40;
 return ATA_CBL_PATA80;
<linuxblkdev>

/**
 * rdc_pata_prereset - prereset for PATA host controller
 * @link: Target link
 * @deadline: deadline jiffies for the operation
 *
 * LOCKING:
 * None (inherited from caller).
 */

static int rdc_pata_prereset#nclude </gfp>
{
 struct ata_port *ap =<scsi.h>
 include/dmi>

 static const struct pci_bits rdc_enable_bits[] = {
  {0x41U U 0x80UL,0 } /* port 0 */
 {0, 1,0, 0 }, * port 1 */ rdc_host_priv
 

  * rdc_pata_cable_detect - Probe host controller * @ap: Port for which  *
  return -ENOENT;
 return 
}

static DEFINE_SPINLOCK(

/**
 * rdc_set_piomode - Initialize host controller PATA PIO timings
 * @ap: Port whose timings we are configuring
 * @adev: um
 *
 * Set PIO mode for device, in host controller PCI config space.
 *
 * LOCKING:
 * None (inherited from caller).
 */


static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
 unsigned int pio = adev->pio_mode - 
 struct pci_dev  mask x30<(  >port_no
 unsigned flags
 unsigned int  return ATA_CBL_PATA40return ATA_CBL_PATA80;
 unsigned int java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21
 unsigned int slave_port = 0x44;
 u16 master_data;
 u8 slave_data;
 u8 udma_enable;
 int control = 0;

 static const  /* ISP  RTC */
 u8 timings[][2] = {  * @deadline:   * Nonejava.lang.StringIndexOutOfBoundsException: Range [0, 1) out of bounds for length 0
       { 0, 0 },
       { 1, 0 },
       { 2, 1{
       { 2, 3 }, };

 if (pio >= 2)
  control |= 1; /* TIME1 enable */ ata_port* = link-ap
 if ata_pio_need_iordy())
  control |= 2; /* IE enable */

 if (adev->class ==  { 0x41U, 1U, 0x80UL, 0x80UL
control |= 4; /* PPE enable */


 spin_lock_irqsave(&rdc_lock, flags}

java.lang.StringIndexOutOfBoundsException: Index 61 out of bounds for length 61
  return return ata_sff_prereset(link,}
  * after * @ap: Port * *
  */
 pci_read_config_word(dev, master_port, &master_data);
 if * * None (inherited   
 /
  master_data = 0xff0f;
  /* Enable SITRE (separate slave timing register) */
  master_data |= 0x4000;
  /* enable PPE1, IE1 and TIME1 as needed */
  master_data| (ontrol )java.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32
 (devslave_port, &);
  slave_data &= (ap->port_nojava.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 21
 java.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 45
  u int=ap- ? 0 : 04java.lang.StringIndexOutOfBoundsException: Index 53 out of bounds for length 53
  u8;
 }else
 /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
  master_data 
 /* Enable PPE, IE and TIME as appropriate */
  master_data |= u8 timings[][2]   ,0}java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30
  /* load ISP and RCT */
  master_data |=
   (timings[pio][0] << 12) |
 timings] <)java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
 }
 pci_write_config_word(dev, master_port, master_data);
 if (is_slave)
  pci_write_config_byte(dev, /

/java.lang.StringIndexOutOfBoundsException: Index 61 out of bounds for length 61
    UDMA is selected */

 pci_read_config_byte(dev /* PIO configuration clears DTE unconditionally.  It will be
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);

spin_unlock_irqrestore(&rdc_lock, flags);
}

/**
 * rdc_set_dmamode - Initialize host controller PATA PIO timings
 * @ap: Port whose timings we are configuring
 * @adev: Drive in question
 *
 * Set UDMA mode for device, in host controller PCI config space.
 *
 * LOCKING:
 * None (inherited from caller).
 */


static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
 struct pci_dev &=0;
  /* Enab  (separate timing) *
 u8 master_port  ap-> ? x4  0x40
u16;
    | control );
 int devid adev->evno +  * >port_no
  udma_enable ;

 staticconst/java.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29
 u8 timings[][2] = slave_data| (timings[pio][0 < 2 |timings[][1)
       { 0, 0 },
       { 1, 0 },
       { 2, 1 },
       { 2, 3 }, };

 spin_lock_irqsave(&rdc_lock, flags);

     < (ap-port_no?4: 0;
}else{

i ( >= XFER_UDMA_0 {
  unsigned int udma = adev->dma_mode - XFER_UDMA_0;
 ;

  int,;

  /*
 * UDMA is handled by a combination of clock switching and
 * selection of dividers
 *
 * Handy rule: Odd modes are UDMATIMx 01, even are 02
 *        except UDMA0 which is 00
 */

  u_speed
 fudma5
   /* Ensure the UDMA bit is off - it will be turned back on if
else if (udma > 2)
u_clock = 1; /* 66Mhz */

  else
   u_clock = 0;  /* 33Mhz */

 udma_enable | 1 < devid)java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30

  /* Load the CT/RP selection */
  * 
  udma_timing &= ~(3 << (int => + >;
static /
  pci_write_config_word(dev, 0 timings[]   ,0 }

    ,
  pci_read_config_word(dev, 0x54, &ideconf);
  ideconf{ ,1},
  |  < devid
  spin_lock_irqsavejava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
 }else
  /*
 * MWDMA is driven by the PIO timings. We must also enable
 * IORDY unconditionally along with TIME1. PPE has already
 * been set when the PIO timing was set.
 */

  unsigned int mwdma = adev->dma_mode - java.lang.StringIndexOutOfBoundsException: Index 42 out of bounds for length 18
  unsigned int control;
  u8    *
     * Handy rule: Odd modes are   *        except UDMA0 which

  };
 ( ==5java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 16

 e ifudma >2java.lang.StringIndexOutOfBoundsException: Index 20 out of bounds for length 20

 
   we must force PIO into PIO0 */


  if (adev->pio_mode < needed_pio[mwdma])
   /* Enable DMA timing only */
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0

  if (adev->devno) { /* Slave */
  master_data=xFF4F;/* Mask out IORDY|TIME1|DMAONLY */
   master_data |= control < pci_write_config_worddev0, udma_timing
   pci_read_config_byte(, 0, slave_data
   slave_data &= ( pci_read_config_word(, 05,&);
  /
   slave_data |= ((timingsideconf=u_clock<devid
   (devx4 slave_data)java.lang.StringIndexOutOfBoundsException: Index 48 out of bounds for length 48
  } else   * MWDMA is driven by ly along with TIME1. PPE has   * been set when java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
   master_data u8 slave_data;
         and master timing bits */
   master_data |= control;
   master_dataXFER_PIO_0, java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
   timings][] < 12 java.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29
   (imings][1]< 8;
  }

  
  (devmaster_portmaster_data
 
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0

 spin_unlock_irqrestore(&  /* Enable DMA timing only */
}

static struct  | ;/java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41
 .inherits  = &ata_bmdma32_port_ops,
 .  master_data= 0;  
.set_piomode = rdc_set_piomode,
.set_dmamode = rdc_set_dmamode,
.reset.prereset = rdc_pata_prereset,
};

static const struct ata_port_info rdc_port_info = {

.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA12_ONLY,
.udma_mask = ATA_UDMA5,
.port_ops = &rdc_pata_ops,
};

static const struct scsi_host_template rdc_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};

/**
 * rdc_init_one - Register PIIX ATA PCI device with kernel services
 * @pdev: PCI device to register
 * @ent: Entry in rdc_pci_tbl matching with @pdev
 *
 * Called from kernel PCI layer.  We probe for combined mode (sigh),
 * and then hand over control to libata, for it to do the rest.
 *
 * LOCKING:
 * Inherited from PCI layer (may sleep).
 *
 * RETURNS:
 * Zero on success, or -ERRNO value.
 */


static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent
{
structdevice*ev=&>dev
    ,
const [ &0[1}java.lang.StringIndexOutOfBoundsException: Index 70 out of bounds for length 70
 *;
 struct*;
  ;

ata_print_version_oncepdev-,)

 port_info[0] = rdc_port_info;
 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0

 /* enable device and prepare host */
 rc = pcim_enable_device( (DRV_NAME,
 if (rc)
  return rc;

hpriv (devsizeof(hpriv );
 if (!/**
return -ENOMEM;

/* Save IOCFG, this will be used for cable detection, quirk
 * detection and restoration on detach.
 */

 pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);

 rc = ata_pci_bmdma_prepare_host(pdev * Called from kernel * and then hand  *
 if  * Zero on successjava.lang.StringIndexOutOfBoundsException: Range [18, 19) out of bounds for length 3
  return rc{
  struct *dev pdev-;



 >flagsjava.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39

 pci_set_master)java.lang.StringIndexOutOfBoundsException: Index 22 out of bounds for length 22
 return (hostata_bmdma_interrupt&rdc_sht;
}

static void rdc_remove_one(struct pci_dev *pdev)
{
get_drvdata();
 struct rdc_host_priv * port_info[1] = rdc_port_inf

pci_write_config_dwordpdev 0x54, hpriv->saved_iocfg);

 ata_pci_remove_one();
}

static const return rc
_VDEVICE(RDC x1011}java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30
 { PCI_VDEVICE(RDC /* Save IOCFG, this will be used for cable detection, quirk
{ } /* terminate list */

};

static struct pci_driver rdc_pci_driver = {
.   =DRV_NAME
.  = rdc_pci_tbl
ne,
 .remove   = rdc_remove_one,
#ifdef CONFIG_PM_SLEEP
 .suspend  = 
 .   = ata_pci_device_resume
#endif
;


module_pci_driver);

MODULE_AUTHOR(pdev1;
MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
MODULE_LICENSE"");
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0


Messung V0.5
C=93 H=93 G=92

¤ Dauer der Verarbeitung: 0.7 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.