Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/net/ppp/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  ppp_mppe.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0 */
#define MPPE_PAD                4      /* MPPE growth per frame */
#define MPPE_MAX_KEY_LEN       16      /* largest key length (128-bit) */

/* option bits for ccp_options.mppe */
#define MPPE_OPT_40            0x01    /* 40 bit */
#define MPPE_OPT_128           0x02    /* 128 bit */
#define MPPE_OPT_STATEFUL      0x04    /* stateful mode */
/* unsupported opts */
#define MPPE_OPT_56            0x08    /* 56 bit */
#define MPPE_OPT_MPPC          0x10    /* MPPC compression */
#define MPPE_OPT_D             0x20    /* Unknown */
#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
#define MPPE_OPT_UNKNOWN       0x40    /* Bits !defined in RFC 3078 were set */

/*
 * This is not nice ... the alternative is a bitfield struct though.
 * And unfortunately, we cannot share the same bits for the option
 * names above since C and H are the same bit.  We could do a u_int32
 * but then we have to do a htonl() all the time and/or we still need
 * to know which octet is which.
 */

#define MPPE_C_BIT             0x01    /* MPPC */
#define MPPE_D_BIT             0x10    /* Obsolete, usage unknown */
#define MPPE_L_BIT             0x20    /* 40-bit */
#define MPPE_S_BIT             0x40    /* 128-bit */
#define MPPE_M_BIT             0x80    /* 56-bit, not supported */
#define MPPE_H_BIT             0x01    /* Stateless (in a different byte) */

/* Does not include H bit; used for least significant octet only. */
#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)

/* Build a CI from mppe opts (see RFC 3078) */
#define MPPE_OPTS_TO_CI(opts, ci)              \
    do {                                       \
       u_char *ptr = ci; /* u_char[4] */       \
                                               \
       /* H bit */                             \
       if (opts & MPPE_OPT_STATEFUL)           \
           *ptr++ = 0x0;                       \
       else                                    \
           *ptr++ = MPPE_H_BIT;                \
       *ptr++ = 0;                             \
       *ptr++ = 0;                             \
                                               \
       /* S,L bits */                          \
       *ptr = 0;                               \
       if (opts & MPPE_OPT_128)                \
           *ptr |= MPPE_S_BIT;                 \
       if (opts & MPPE_OPT_40)                 \
           *ptr |= MPPE_L_BIT;                 \
       /* M,D,C bits not supported */          \
    } while (/* CONSTCOND */ 0)

/* The reverse of the above */
#define MPPE_CI_TO_OPTS(ci, opts)              \
    do {                                       \
       u_char *ptr = ci; /* u_char[4] */       \
                                               \
       opts = 0;                               \
                                               \
       /* H bit */                             \
       if (!(ptr[0] & MPPE_H_BIT))             \
           opts |= MPPE_OPT_STATEFUL;          \
                                               \
       /* S,L bits */                          \
       if (ptr[3] & MPPE_S_BIT)                \
           opts |= MPPE_OPT_128;               \
       if (ptr[3] & MPPE_L_BIT)                \
           opts |= MPPE_OPT_40;                \
                                               \
       /* M,D,C bits */                        \
       if (ptr[3] & MPPE_M_BIT)                \
           opts |= MPPE_OPT_56;                \
       if (ptr[3] & MPPE_D_BIT)                \
           opts |= MPPE_OPT_D;                 \
       if (ptr[3] & MPPE_C_BIT)                \
           opts |= MPPE_OPT_MPPC;              \
                                               \
       /* Other bits */                        \
       if (ptr[0] & ~MPPE_H_BIT)               \
           opts |= MPPE_OPT_UNKNOWN;           \
       if (ptr[1] || ptr[2])                   \
           opts |= MPPE_OPT_UNKNOWN;           \
       if (ptr[3] & ~MPPE_ALL_BITS)            \
           opts |= MPPE_OPT_UNKNOWN;           \
    } while (/* CONSTCOND */ 0)

Messung V0.5
C=63 H=53 G=57

¤ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.