struct iwl_tlv_ucode_header { /* * The TLV style ucode header is distinguished from * the v1/v2 style header by first four bytes being * zero, as such is an invalid combination of * major/minor/API/serial versions.
*/
__le32 zero;
__le32 magic;
u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; /* major/minor/API/serial or major in new format */
__le32 ver;
__le32 build;
__le64 ignore; /* * The data contained herein has a TLV layout, * see above for the TLV header and types. * Note that each TLV is padded to a length * that is a multiple of 4 for alignment.
*/
u8 data[];
};
/* * ucode TLVs * * ability to get extension for: flags & capabilities from ucode binaries files
*/ struct iwl_ucode_api {
__le32 api_index;
__le32 api_flags;
} __packed;
/** * enum iwl_ucode_tlv_flag - ucode API flags * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, * treats good CRC threshold as a boolean * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of block list instead of 64 in scan * offload profile config command. * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
*/ enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
};
typedefunsignedint __bitwise iwl_ucode_tlv_api_t;
/** * enum iwl_ucode_tlv_api - ucode api * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan * iteration complete notification, and the timestamp reported for RX * received during scan, are reported in TSF of the mac specified in the * scan request. * @IWL_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of * ADD_MODIFY_STA_KEY_API_S_VER_2. * @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement. * @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2 * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL: support for adaptive dwell in scanning * @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used * @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field * indicating low latency direction. * @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is * deprecated. * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2: This ucode supports version 8 * of scan request: SCAN_REQUEST_CMD_UMAC_API_S_VER_8 * @IWL_UCODE_TLV_API_FRAG_EBS: This ucode supports fragmented EBS * @IWL_UCODE_TLV_API_REDUCE_TX_POWER: This ucode supports v5 of * the REDUCE_TX_POWER_CMD. * @IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF: This ucode supports the short * version of the beacon notification. * @IWL_UCODE_TLV_API_BEACON_FILTER_V4: This ucode supports v4 of * BEACON_FILTER_CONFIG_API_S_VER_4. * @IWL_UCODE_TLV_API_REGULATORY_NVM_INFO: This ucode supports v4 of * REGULATORY_NVM_GET_INFO_RSP_API_S. * @IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ: This ucode supports v7 of * LOCATION_RANGE_REQ_CMD_API_S and v6 of LOCATION_RANGE_RESP_NTFY_API_S. * @IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS: This ucode supports v2 of * SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S and v3 of * SCAN_OFFLOAD_PROFILES_QUERY_RSP_S. * @IWL_UCODE_TLV_API_MBSSID_HE: This ucode supports v2 of * STA_CONTEXT_DOT11AX_API_S * @IWL_UCODE_TLV_API_FTM_RTT_ACCURACY: version 7 of the range response API * is supported by FW, this indicates the RTT confidence value * @IWL_UCODE_TLV_API_SAR_TABLE_VER: This ucode supports different sar * version tables. * @IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG: This ucode supports v3 of * SCAN_CONFIG_DB_CMD_API_S. * @IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP: support for setting adaptive dwell * number of APs in the 5 GHz band * @IWL_UCODE_TLV_API_BAND_IN_RX_DATA: FW reports band number in RX notification * @IWL_UCODE_TLV_API_NO_HOST_DISABLE_TX: Firmware offloaded the station disable tx * logic. * @IWL_UCODE_TLV_API_INT_DBG_BUF_CLEAR: Firmware supports clearing the debug * internal buffer * @IWL_UCODE_TLV_API_SMART_FIFO_OFFLOAD: Firmware doesn't need the host to * configure the smart fifo * * @NUM_IWL_UCODE_TLV_API: number of bits used
*/ enum iwl_ucode_tlv_api { /* API Set 0 */
IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8,
IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18,
IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20,
IWL_UCODE_TLV_API_SCAN_TSF_REPORT = (__force iwl_ucode_tlv_api_t)28,
IWL_UCODE_TLV_API_TKIP_MIC_KEYS = (__force iwl_ucode_tlv_api_t)29,
IWL_UCODE_TLV_API_STA_TYPE = (__force iwl_ucode_tlv_api_t)30,
IWL_UCODE_TLV_API_NAN2_VER2 = (__force iwl_ucode_tlv_api_t)31, /* API Set 1 */
IWL_UCODE_TLV_API_ADAPTIVE_DWELL = (__force iwl_ucode_tlv_api_t)32,
IWL_UCODE_TLV_API_OCE = (__force iwl_ucode_tlv_api_t)33,
IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE = (__force iwl_ucode_tlv_api_t)34,
IWL_UCODE_TLV_API_NEW_RX_STATS = (__force iwl_ucode_tlv_api_t)35,
IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL = (__force iwl_ucode_tlv_api_t)36,
IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY = (__force iwl_ucode_tlv_api_t)38,
IWL_UCODE_TLV_API_DEPRECATE_TTAK = (__force iwl_ucode_tlv_api_t)41,
IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2 = (__force iwl_ucode_tlv_api_t)42,
IWL_UCODE_TLV_API_FRAG_EBS = (__force iwl_ucode_tlv_api_t)44,
IWL_UCODE_TLV_API_REDUCE_TX_POWER = (__force iwl_ucode_tlv_api_t)45,
IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF = (__force iwl_ucode_tlv_api_t)46,
IWL_UCODE_TLV_API_BEACON_FILTER_V4 = (__force iwl_ucode_tlv_api_t)47,
IWL_UCODE_TLV_API_REGULATORY_NVM_INFO = (__force iwl_ucode_tlv_api_t)48,
IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ = (__force iwl_ucode_tlv_api_t)49,
IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS = (__force iwl_ucode_tlv_api_t)50,
IWL_UCODE_TLV_API_MBSSID_HE = (__force iwl_ucode_tlv_api_t)52,
IWL_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE = (__force iwl_ucode_tlv_api_t)53,
IWL_UCODE_TLV_API_FTM_RTT_ACCURACY = (__force iwl_ucode_tlv_api_t)54,
IWL_UCODE_TLV_API_SAR_TABLE_VER = (__force iwl_ucode_tlv_api_t)55,
IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG = (__force iwl_ucode_tlv_api_t)56,
IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP = (__force iwl_ucode_tlv_api_t)57,
IWL_UCODE_TLV_API_SCAN_EXT_CHAN_VER = (__force iwl_ucode_tlv_api_t)58,
IWL_UCODE_TLV_API_BAND_IN_RX_DATA = (__force iwl_ucode_tlv_api_t)59, /* API Set 2 */
IWL_UCODE_TLV_API_NO_HOST_DISABLE_TX = (__force iwl_ucode_tlv_api_t)66,
IWL_UCODE_TLV_API_INT_DBG_BUF_CLEAR = (__force iwl_ucode_tlv_api_t)67,
IWL_UCODE_TLV_API_SMART_FIFO_OFFLOAD = (__force iwl_ucode_tlv_api_t)68,
NUM_IWL_UCODE_TLV_API /* * This construction make both sparse (which cannot increment the previous * member due to its bitwise type) and kernel-doc (which doesn't understand * the ifdef/else properly) work.
*/ #ifdef __CHECKER__ #define __CHECKER_NUM_IWL_UCODE_TLV_API 128
= (__force iwl_ucode_tlv_api_t)__CHECKER_NUM_IWL_UCODE_TLV_API, #define NUM_IWL_UCODE_TLV_API __CHECKER_NUM_IWL_UCODE_TLV_API #endif
};
/** * enum iwl_ucode_tlv_capa - ucode capabilities * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report * action frame * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current * channel in DS parameter set element in probe requests. * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in * probe requests. * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), * which also implies support for the scheduler configuration command * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it * is standalone or with a BSS station interface in the same binding. * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different * sources for the MCC. This TLV bit is a future replacement to * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR * is supported. * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used) * @IWL_UCODE_TLV_CAPA_FRAGMENTED_PNVM_IMG: supports fragmented PNVM image * @IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT: the firmware supports setting * stabilization latency for SoCs. * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related * @IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2: firmware implements Coex Schema 2 * IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD: firmware supports CSA command * @IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band * (6 GHz). * @IWL_UCODE_TLV_CAPA_CS_MODIFY: firmware supports modify action CSA command * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA * countdown offloading. Beacon notifications are not sent to the host. * The fw also offloads TBTT alignment. * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what * antenna the beacon should be transmitted * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon * from AP and will send it upon d0i3 exit. * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3: support LAR API V3 * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature * thresholds reporting * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in * regular image. * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared * memory addresses from the firmware. * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger * command size (command version 4) that supports toggling ACK TX * power reduction. * @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3 * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax * capability. * @IWL_UCODE_TLV_CAPA_CSI_REPORTING: firmware is capable of being configured * to report the CSI information with (certain) RX frames * @IWL_UCODE_TLV_CAPA_FTM_CALIBRATED: has FTM calibrated and thus supports both * initiator and responder * @IWL_UCODE_TLV_CAPA_BIOS_OVERRIDE_UNII4_US_CA: supports (de)activating UNII-4 * for US/CA/WW from BIOS * @IWL_UCODE_TLV_CAPA_PROTECTED_TWT: Supports protection of TWT action frames * @IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE: Supports the firmware handshake in * reset flow * @IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN: Support for passive scan on 6GHz PSC * channels even when these are not enabled. * @IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT: Support for indicating dump collection * complete to FW. * @IWL_UCODE_TLV_CAPA_SPP_AMSDU_SUPPORT: Support SPP (signaling and payload * protected) A-MSDU. * @IWL_UCODE_TLV_CAPA_SECURE_LTF_SUPPORT: Support secure LTF measurement. * @IWL_UCODE_TLV_CAPA_MONITOR_PASSIVE_CHANS: Support monitor mode on otherwise * passive channels * @IWL_UCODE_TLV_CAPA_BIOS_OVERRIDE_5G9_FOR_CA: supports (de)activating 5G9 * for CA from BIOS. * @IWL_UCODE_TLV_CAPA_UHB_CANADA_TAS_SUPPORT: supports %TAS_UHB_ALLOWED_CANADA * @IWL_UCODE_TLV_CAPA_EXT_FSEQ_IMAGE_SUPPORT: external FSEQ image support * @IWL_UCODE_TLV_CAPA_FW_ACCEPTS_RAW_DSM_TABLE: Firmware has capability of * handling raw DSM table data. * * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
*/ enum iwl_ucode_tlv_capa { /* set 0 */
IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0,
IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1,
IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2,
IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3,
IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6,
IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8,
IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9,
IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10,
IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11,
IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12,
IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13,
IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = (__force iwl_ucode_tlv_capa_t)17,
IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18,
IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21,
IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22,
IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD = (__force iwl_ucode_tlv_capa_t)26,
IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28,
IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
/* set 4 */ /** * @IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT: FW reset handshake is needed * during assert handling even if the dump isn't split
*/
IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT = (__force iwl_ucode_tlv_capa_t)(4 * 32 + 0),
IWL_UCODE_TLV_CAPA_FW_ACCEPTS_RAW_DSM_TABLE = (__force iwl_ucode_tlv_capa_t)(4 * 32 + 1),
NUM_IWL_UCODE_TLV_CAPA /* * This construction make both sparse (which cannot increment the previous * member due to its bitwise type) and kernel-doc (which doesn't understand * the ifdef/else properly) work.
*/ #ifdef __CHECKER__ #define __CHECKER_NUM_IWL_UCODE_TLV_CAPA 128
= (__force iwl_ucode_tlv_capa_t)__CHECKER_NUM_IWL_UCODE_TLV_CAPA, #define NUM_IWL_UCODE_TLV_CAPA __CHECKER_NUM_IWL_UCODE_TLV_CAPA #endif
};
/* The default calibrate table size if not specified by firmware file */ #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
/* The default max probe length if not specified by the firmware file */ #define IWL_DEFAULT_MAX_PROBE_LENGTH 200
/* * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address.
*/ #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC #define PAGING_SEPARATOR_SECTION 0xAAAABBBB
/** * struct iwl_tlv_calib_ctrl - Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers.
*/ struct iwl_tlv_calib_ctrl {
__le32 flow_trigger;
__le32 event_trigger;
} __packed;
/** * struct iwl_fw_dbg_reg_op - an operation on a register * * @op: &enum iwl_fw_dbg_reg_operator * @reserved: reserved * @addr: offset of the register * @val: value
*/ struct iwl_fw_dbg_reg_op {
u8 op;
u8 reserved[3];
__le32 addr;
__le32 val;
} __packed;
/** * enum iwl_fw_dbg_monitor_mode - available monitor recording modes * * @SMEM_MODE: monitor stores the data in SMEM * @EXTERNAL_MODE: monitor stores the data in allocated DRAM * @MARBH_MODE: monitor stores the data in MARBH buffer * @MIPI_MODE: monitor outputs the data through the MIPI interface
*/ enum iwl_fw_dbg_monitor_mode {
SMEM_MODE = 0,
EXTERNAL_MODE = 1,
MARBH_MODE = 2,
MIPI_MODE = 3,
};
/** * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments * * @data_type: the memory segment type to record * @ofs: the memory segment offset * @len: the memory segment length, in bytes * * This parses IWL_UCODE_TLV_FW_MEM_SEG
*/ struct iwl_fw_dbg_mem_seg_tlv {
__le32 data_type;
__le32 ofs;
__le32 len;
} __packed;
/** * struct iwl_fw_dbg_dest_tlv_v1 - configures the destination of the debug data * * @version: version of the TLV - currently 0 * @monitor_mode: &enum iwl_fw_dbg_monitor_mode * @size_power: buffer size will be 2^(size_power + 11) * @reserved: reserved * @base_reg: addr of the base addr register (PRPH) * @end_reg: addr of the end addr register (PRPH) * @write_ptr_reg: the addr of the reg of the write pointer * @wrap_count: the addr of the reg of the wrap_count * @base_shift: shift right of the base addr reg * @end_shift: shift right of the end addr reg * @reg_ops: array of registers operations * * This parses IWL_UCODE_TLV_FW_DBG_DEST
*/ struct iwl_fw_dbg_dest_tlv_v1 {
u8 version;
u8 monitor_mode;
u8 size_power;
u8 reserved;
__le32 base_reg;
__le32 end_reg;
__le32 write_ptr_reg;
__le32 wrap_count;
u8 base_shift;
u8 end_shift; struct iwl_fw_dbg_reg_op reg_ops[];
} __packed;
/* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */ #define IWL_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000 /* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */ #define IWL_LDBG_M2S_BUF_BA_MSK 0x00000fff /* The smem buffer chunks are in units of 256 bits */ #define IWL_M2S_UNIT_SIZE 0x100
/** * enum iwl_fw_dbg_trigger_mode - triggers functionalities * * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to * collect only monitor data
*/ enum iwl_fw_dbg_trigger_mode {
IWL_FW_DBG_TRIGGER_START = BIT(0),
IWL_FW_DBG_TRIGGER_STOP = BIT(1),
IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
};
/** * enum iwl_fw_dbg_trigger_flags - the flags supported by wrt triggers * @IWL_FW_DBG_FORCE_RESTART: force a firmware restart
*/ enum iwl_fw_dbg_trigger_flags {
IWL_FW_DBG_FORCE_RESTART = BIT(0),
};
/** * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger * @IWL_FW_DBG_CONF_VIF_ANY: any vif type * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode * @IWL_FW_DBG_CONF_VIF_AP: AP mode * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
*/ enum iwl_fw_dbg_trigger_vif_type {
IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
};
/** * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger * @id: &enum iwl_fw_dbg_trigger * @vif_type: &enum iwl_fw_dbg_trigger_vif_type * @stop_conf_ids: bitmap of configurations this trigger relates to. * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding * to the currently running configuration is set, the data should be * collected. * @stop_delay: how many milliseconds to wait before collecting the data * after the STOP trigger fires. * @mode: &enum iwl_fw_dbg_trigger_mode - can be stop / start of both * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what * configuration should be applied when the triggers kicks in. * @occurrences: number of occurrences. 0 means the trigger will never fire. * @trig_dis_ms: the time, in milliseconds, after an occurrence of this * trigger in which another occurrence should be ignored. * @flags: &enum iwl_fw_dbg_trigger_flags * @reserved: reserved (for alignment) * @data: trigger data
*/ struct iwl_fw_dbg_trigger_tlv {
__le32 id;
__le32 vif_type;
__le32 stop_conf_ids;
__le32 stop_delay;
u8 mode;
u8 start_conf_id;
__le16 occurrences;
__le16 trig_dis_ms;
u8 flags;
u8 reserved[5];
/** * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons * @stop_consec_missed_bcon: stop recording if threshold is crossed. * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. * @start_consec_missed_bcon: start recording if threshold is crossed. * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. * @reserved1: reserved * @reserved2: reserved
*/ struct iwl_fw_dbg_trigger_missed_bcon {
__le32 stop_consec_missed_bcon;
__le32 stop_consec_missed_bcon_since_rx;
__le32 reserved2[2];
__le32 start_consec_missed_bcon;
__le32 start_consec_missed_bcon_since_rx;
__le32 reserved1[2];
} __packed;
/** * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW. * @cmds: the list of commands to trigger the collection on
*/ struct iwl_fw_dbg_trigger_cmd { struct cmd {
u8 cmd_id;
u8 group_id;
} __packed cmds[16];
} __packed;
/** * struct iwl_fw_dbg_trigger_stats - configures trigger for statistics * @stop_offset: the offset of the value to be monitored * @stop_threshold: the threshold above which to collect * @start_offset: the offset of the value to be monitored * @start_threshold: the threshold above which to start recording
*/ struct iwl_fw_dbg_trigger_stats {
__le32 stop_offset;
__le32 stop_threshold;
__le32 start_offset;
__le32 start_threshold;
} __packed;
/** * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI * @rssi: RSSI value to trigger at
*/ struct iwl_fw_dbg_trigger_low_rssi {
__le32 rssi;
} __packed;
/** * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events * @stop_auth_denied: number of denied authentication to collect * @stop_auth_timeout: number of authentication timeout to collect * @stop_rx_deauth: number of Rx deauth before to collect * @stop_tx_deauth: number of Tx deauth before to collect * @stop_assoc_denied: number of denied association to collect * @stop_assoc_timeout: number of association timeout to collect * @stop_connection_loss: number of connection loss to collect * @start_auth_denied: number of denied authentication to start recording * @start_auth_timeout: number of authentication timeout to start recording * @start_rx_deauth: number of Rx deauth to start recording * @start_tx_deauth: number of Tx deauth to start recording * @start_assoc_denied: number of denied association to start recording * @start_assoc_timeout: number of association timeout to start recording * @start_connection_loss: number of connection loss to start recording
*/ struct iwl_fw_dbg_trigger_mlme {
u8 stop_auth_denied;
u8 stop_auth_timeout;
u8 stop_rx_deauth;
u8 stop_tx_deauth;
/** * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer * @command_queue: timeout for the command queue in ms * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms * @softap: timeout for the queues of a softAP in ms * @p2p_go: timeout for the queues of a P2P GO in ms * @p2p_client: timeout for the queues of a P2P client in ms * @p2p_device: timeout for the queues of a P2P device in ms * @ibss: timeout for the queues of an IBSS in ms * @tdls: timeout for the queues of a TDLS station in ms
*/ struct iwl_fw_dbg_trigger_txq_timer {
__le32 command_queue;
__le32 bss;
__le32 softap;
__le32 p2p_go;
__le32 p2p_client;
__le32 p2p_device;
__le32 ibss;
__le32 tdls;
__le32 reserved[4];
} __packed;
/** * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a * trigger each time a time event notification that relates to time event * id with one of the actions in the bitmap is received and * BIT(notif->status) is set in status_bitmap. *
*/ struct iwl_fw_dbg_trigger_time_event { struct {
__le32 id;
__le32 action_bitmap;
__le32 status_bitmap;
} __packed time_events[16];
} __packed;
/** * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger * rx_ba_start: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is started. * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is stopped. * tx_ba_start: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is started. * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is stopped. * rx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is received (for a Tx BlockAck session). * tx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is send (for an Rx BlocAck session). * frame_timeout: tid bitmap to configure on what tid the trigger should occur * when a frame times out in the reordering buffer.
*/ struct iwl_fw_dbg_trigger_ba {
__le16 rx_ba_start;
__le16 rx_ba_stop;
__le16 tx_ba_start;
__le16 tx_ba_stop;
__le16 rx_bar;
__le16 tx_bar;
__le16 frame_timeout;
} __packed;
/** * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events. * @action_bitmap: the TDLS action to trigger the collection upon * @peer_mode: trigger on specific peer or all * @peer: the TDLS peer to trigger the collection on
*/ struct iwl_fw_dbg_trigger_tdls {
u8 action_bitmap;
u8 peer_mode;
u8 peer[ETH_ALEN];
u8 reserved[4];
} __packed;
/** * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response * status. * @statuses: the list of statuses to trigger the collection on
*/ struct iwl_fw_dbg_trigger_tx_status { struct tx_status {
u8 status;
u8 reserved[3];
} __packed statuses[16];
__le32 reserved[2];
} __packed;
/** * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. * @id: conf id * @usniffer: should the uSniffer image be used * @num_of_hcmds: how many HCMDs to send are present here * @hcmd: a variable length host command to be sent to apply the configuration. * If there is more than one HCMD to send, they will appear one after the * other and be sent in the order that they appear in. * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to * %FW_DBG_CONF_MAX configuration per run.
*/ struct iwl_fw_dbg_conf_tlv {
u8 id;
u8 usniffer;
u8 reserved;
u8 num_of_hcmds; struct iwl_fw_dbg_conf_hcmd hcmd;
} __packed;
#define IWL_FW_CMD_VER_UNKNOWN 99
/** * struct iwl_fw_cmd_version - firmware command version entry * @cmd: command ID * @group: group ID * @cmd_ver: command version * @notif_ver: notification version
*/ struct iwl_fw_cmd_version {
u8 cmd;
u8 group;
u8 cmd_ver;
u8 notif_ver;
} __packed;
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.