Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/thermal/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  dove_thermal.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Dove thermal sensor driver
 *
 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
 */

#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>

#define DOVE_THERMAL_TEMP_OFFSET 1
#define DOVE_THERMAL_TEMP_MASK  0x1FF

/* Dove Thermal Manager Control and Status Register */
#define PMU_TM_DISABLE_OFFS  0
#define PMU_TM_DISABLE_MASK  (0x1 << PMU_TM_DISABLE_OFFS)

/* Dove Theraml Diode Control 0 Register */
#define PMU_TDC0_SW_RST_MASK  (0x1 << 1)
#define PMU_TDC0_SEL_VCAL_OFFS  5
#define PMU_TDC0_SEL_VCAL_MASK  (0x3 << PMU_TDC0_SEL_VCAL_OFFS)
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
#define PMU_TDC0_AVG_NUM_OFFS  25
#define PMU_TDC0_AVG_NUM_MASK  (0x7 << PMU_TDC0_AVG_NUM_OFFS)

/* Dove Thermal Diode Control 1 Register */
#define PMU_TEMP_DIOD_CTRL1_REG  0x04
#define PMU_TDC1_TEMP_VALID_MASK (0x1 << 10)

/* Dove Thermal Sensor Dev Structure */
struct dove_thermal_priv {
 void __iomem *sensor;
 void __iomem *control;
};

static int dove_init_sensor(const struct dove_thermal_priv *priv)
{
 u32 reg;
 u32 i;

 /* Configure the Diode Control Register #0 */
 reg = readl_relaxed(priv->control);

 /* Use average of 2 */
 reg &= ~PMU_TDC0_AVG_NUM_MASK;
 reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);

 /* Reference calibration value */
 reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
 reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);

 /* Set the high level reference for calibration */
 reg &= ~PMU_TDC0_SEL_VCAL_MASK;
 reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
 writel(reg, priv->control);

 /* Reset the sensor */
 reg = readl_relaxed(priv->control);
 writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
 writel(reg, priv->control);

 /* Enable the sensor */
 reg = readl_relaxed(priv->sensor);
 reg &= ~PMU_TM_DISABLE_MASK;
 writel(reg, priv->sensor);

 /* Poll the sensor for the first reading */
 for (i = 0; i < 1000000; i++) {
  reg = readl_relaxed(priv->sensor);
  if (reg & DOVE_THERMAL_TEMP_MASK)
   break;
 }

 if (i == 1000000)
  return -EIO;

 return 0;
}

static int dove_get_temp(struct thermal_zone_device *thermal,
     int *temp)
{
 unsigned long reg;
 struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);

 /* Valid check */
 reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
 if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
  return -EIO;

 /*
 * Calculate temperature. According to Marvell internal
 * documentation the formula for this is:
 * Celsius = (322-reg)/1.3625
 */

 reg = readl_relaxed(priv->sensor);
 reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
 *temp = ((3220000000UL - (10000000UL * reg)) / 13625);

 return 0;
}

static const struct thermal_zone_device_ops ops = {
 .get_temp = dove_get_temp,
};

static const struct of_device_id dove_thermal_id_table[] = {
 { .compatible = "marvell,dove-thermal" },
 {}
};

static int dove_thermal_probe(struct platform_device *pdev)
{
 struct thermal_zone_device *thermal = NULL;
 struct dove_thermal_priv *priv;
 int ret;

 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 if (!priv)
  return -ENOMEM;

 priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 if (IS_ERR(priv->sensor))
  return PTR_ERR(priv->sensor);

 priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
 if (IS_ERR(priv->control))
  return PTR_ERR(priv->control);

 ret = dove_init_sensor(priv);
 if (ret) {
  dev_err(&pdev->dev, "Failed to initialize sensor\n");
  return ret;
 }

 thermal = thermal_tripless_zone_device_register("dove_thermal", priv,
       &ops, NULL);
 if (IS_ERR(thermal)) {
  dev_err(&pdev->dev,
   "Failed to register thermal zone device\n");
  return PTR_ERR(thermal);
 }

 ret = thermal_zone_device_enable(thermal);
 if (ret) {
  thermal_zone_device_unregister(thermal);
  return ret;
 }

 platform_set_drvdata(pdev, thermal);

 return 0;
}

static void dove_thermal_exit(struct platform_device *pdev)
{
 struct thermal_zone_device *dove_thermal =
  platform_get_drvdata(pdev);

 thermal_zone_device_unregister(dove_thermal);
}

MODULE_DEVICE_TABLE(of, dove_thermal_id_table);

static struct platform_driver dove_thermal_driver = {
 .probe = dove_thermal_probe,
 .remove = dove_thermal_exit,
 .driver = {
  .name = "dove_thermal",
  .of_match_table = dove_thermal_id_table,
 },
};

module_platform_driver(dove_thermal_driver);

MODULE_AUTHOR("Andrew Lunn ");
MODULE_DESCRIPTION("Dove thermal driver");
MODULE_LICENSE("GPL");

Messung V0.5
C=97 H=97 G=96

¤ Dauer der Verarbeitung: 0.9 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.