Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/include/dt-bindings/sound/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 2 kB image not shown  

Quelle  cs35l45.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
 * cs35l45.h -- CS35L45 ALSA SoC audio driver DT bindings header
 *
 * Copyright 2022 Cirrus Logic, Inc.
 */


#ifndef DT_CS35L45_H
#define DT_CS35L45_H

/*
 * cirrus,asp-sdout-hiz-ctrl
 *
 * TX_HIZ_UNUSED:   TX pin high-impedance during unused slots.
 * TX_HIZ_DISABLED: TX pin high-impedance when all channels disabled.
 */

#define CS35L45_ASP_TX_HIZ_UNUSED 0x1
#define CS35L45_ASP_TX_HIZ_DISABLED 0x2

/*
 * Optional GPIOX Sub-nodes:
 *  The cs35l45 node can have up to three "cirrus,gpio-ctrlX" ('X' = [1,2,3])
 *  sub-nodes for configuring the GPIO pins.
 *
 * - gpio-dir : GPIO pin direction. Valid only when 'gpio-ctrl'
 *   is 1.
 *    0 = Output
 *    1 = Input (Default)
 *
 * - gpio-lvl : GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0.
 *
 *    0 = Low (Default)
 *    1 = High
 *
 * - gpio-op-cfg : GPIO output configuration. Valid only when 'gpio-ctrl' is 1
 *   and 'gpio-dir' is 0.
 *
 *    0 = CMOS (Default)
 *    1 = Open Drain
 *
 * - gpio-pol : GPIO output polarity select. Valid only when 'gpio-ctrl' is 1
 *   and 'gpio-dir' is 0.
 *
 *    0 = Non-inverted, Active High (Default)
 *    1 = Inverted, Active Low
 *
 * - gpio-invert : Defines the polarity of the GPIO pin if configured
 *   as input.
 *
 *    0 = Not inverted (Default)
 *    1 = Inverted
 *
 * - gpio-ctrl : Defines the function of the GPIO pin.
 *
 * GPIO1:
 *   0 = High impedance input (Default)
 *   1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
 *   2 = Pin acts as MDSYNC, direction controlled by MDSYNC
 *   3-7 = Reserved
 *
 * GPIO2:
 *   0 = High impedance input (Default)
 *   1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
 *   2 = Pin acts as open drain INT
 *   3 = Reserved
 *   4 = Pin acts as push-pull output INT. Active low.
 *   5 = Pin acts as push-pull output INT. Active high.
 *   6,7 = Reserved
 *
 * GPIO3:
 *   0 = High impedance input (Default)
 *   1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
 *   2-7 = Reserved
 */

#define CS35L45_NUM_GPIOS 0x3

#endif /* DT_CS35L45_H */

¤ Dauer der Verarbeitung: 0.9 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.