| products/sources/formale Sprachen/Cobol/Test-Suite/SQL P/dml100-186/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: dml160.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML131. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * EMBEDDED COBOL (file "DML131.PCO") **************************************************************** * * COMMENT SECTION * * DATE 1994/8/16 EMBEDDED COBOL LANGUAGE * NIST SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML131.PCO * WRITTEN BY: David W. Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE * * This routine tests the Information Schema. * * REFERENCES * FIPS PUB 127-2 14.1 Transitional SQL * ANSI SQL-1992 * **************************************************************** EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC MOVE SQLCODE TO SQL-COD EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid " expected. User ", uidx " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, dml131.pco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0683 ******************* MOVE 1 TO flag DISPLAY " TEST0683 " DISPLAY " INFO_SCHEM: Changes are visible" DISPLAY "References:" DISPLAY " F# 2 -- Basic information schema" DISPLAY " F# 3 -- Basic schema manipulation" DISPLAY " FIPS Change Notice #1 -- Shortened - " identifiers" DISPLAY " in INFO_SCHEM" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *Table should not exist yet COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE TABLE VISCHANGE (C1 INT, C2 FLOAT);" EXEC SQL CREATE TABLE VISCHANGE (C1 INT, C2 FLOAT) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Table should exist COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE'" DISPLAY " AND TABLE_TYPE = 'BASE TABLE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' AND TABLE_TYPE = 'BASE TABLE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 2; its value is ", int1 if (int1 NOT = 2) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "ALTER TABLE VISCHANGE DROP C1 RESTRICT;" EXEC SQL ALTER TABLE VISCHANGE DROP C1 RESTRICT END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Deleted column should not exist MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE'" DISPLAY " AND COLUMN_NAME = 'C2';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' AND COLUMN_NAME = 'C2' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE VISCHANGE CASCADE;" EXEC SQL DROP TABLE VISCHANGE CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Table should not exist COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VISCHANGE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VISCHANGE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0683','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml131.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0683','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0683 ******************** ******************** BEGIN TEST0684 ******************* MOVE 1 TO flag DISPLAY " TEST0684 " DISPLAY " INFO_SCHEM: Visibility to other users" DISPLAY "References:" DISPLAY " F# 2 -- Basic information schema" DISPLAY " FIPS Change Notice #1 -- Shortened - " identifiers" DISPLAY " in INFO_SCHEM" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *This test checks for the correct levels of visibility in the *Information Schema when the user has different levels of *access to the target table. *FLATER has SELECT on HU.WORKS COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'WORKS'" DISPLAY " AND TABLE_TYPE = 'BASE TABLE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'WORKS' AND TABLE_TYPE = 'BASE TABLE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'WORKS';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'WORKS' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 3; its value is ", int1 if (int1 NOT = 3) then MOVE 0 TO flag END-IF *PUBLIC has INSERT on HU.TESTREPORT COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT'" DISPLAY " AND TABLE_TYPE = 'VIEW';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' AND TABLE_TYPE = 'VIEW' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.VIEWS" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.VIEWS WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 3; its value is ", int1 if (int1 NOT = 3) then MOVE 0 TO flag END-IF *FLATER has UPDATE (COL1) on HU.VTABLE COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'VTABLE'" DISPLAY " AND TABLE_TYPE = 'BASE TABLE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'VTABLE' AND TABLE_TYPE = 'BASE TABLE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'VTABLE';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'VTABLE' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF *FLATER has ZILCH on HU.FF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM - " INFO_SCHEM.COLUMNS" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0684','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml131.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0684','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0684 ******************** ******************** BEGIN TEST0685 ******************* MOVE 1 TO flag DISPLAY " TEST0685 " DISPLAY " INFO_SCHEM: Privileges and privilege views" DISPLAY "References:" DISPLAY " F# 2 -- Basic information schema" DISPLAY " F# 3 -- Basic schema manipulation" DISPLAY " F# 23 -- Privilege tables" DISPLAY " FIPS Change Notice #1 -- Shortened - " identifiers" DISPLAY " in INFO_SCHEM" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *11.3 GR.4: owner privs are granted by _SYSTEM COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND GRANTOR <> - " '_SYSTEM'" DISPLAY " AND GRANTEE = 'FLATER';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND GRANTOR <> '_SYSTEM' AND GRANTEE = 'FLATER' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND GRANTOR <> - " '_SYSTEM'" DISPLAY " AND GRANTEE = 'FLATER';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND GRANTOR <> '_SYSTEM' AND GRANTEE = 'FLATER' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF *This one was a GRANT ALL TO SCHANZLE. Five rows: *SELECT, INSERT, UPDATE, DELETE, REFERENCES MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VS1'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'SCHANZLE'" DISPLAY " AND IS_GRANTABLE = 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VS1' AND GRANTOR = 'FLATER' AND GRANTEE = 'SCHANZLE' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 5; its value is ", int1 if (int1 NOT = 5) then MOVE 0 TO flag END-IF *5 times degree of view = 10 MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'VS1'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'SCHANZLE'" DISPLAY " AND IS_GRANTABLE = 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'VS1' AND GRANTOR = 'FLATER' AND GRANTEE = 'SCHANZLE' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 10; its value is ", int1 if (int1 NOT = 10) then MOVE 0 TO flag END-IF *This one was GRANT SELECT TO PUBLIC MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'PROJ'" DISPLAY " AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC'" DISPLAY " AND IS_GRANTABLE = 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'PROJ' AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'PROJ'" DISPLAY " AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC'" DISPLAY " AND IS_GRANTABLE = 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'PROJ' AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 5; its value is ", int1 if (int1 NOT = 5) then MOVE 0 TO flag END-IF *GRANT INSERT TO PUBLIC WITH GRANT OPTION MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT'" DISPLAY " AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC'" DISPLAY " AND IS_GRANTABLE = 'YES' AND PRIVILEGE_TYPE = - " 'INSERT';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC' AND IS_GRANTABLE = 'YES' AND PRIVILEGE_TYPE = 'INSERT' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -153 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT'" DISPLAY " AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC'" DISPLAY " AND IS_GRANTABLE = 'YES' AND PRIVILEGE_TYPE = - " 'INSERT';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' AND GRANTOR = 'HU' AND GRANTEE = 'PUBLIC' AND IS_GRANTABLE = 'YES' AND PRIVILEGE_TYPE = 'INSERT' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 3; its value is ", int1 if (int1 NOT = 3) then MOVE 0 TO flag END-IF MOVE 62 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'TESTREPORT'" DISPLAY " AND GRANTOR = 'HU' AND (GRANTEE <> 'PUBLIC'" DISPLAY " OR IS_GRANTABLE <> 'YES' OR PRIVILEGE_TYPE <> - " 'INSERT');" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'TESTREPORT' AND GRANTOR = 'HU' AND (GRANTEE <> 'PUBLIC' OR IS_GRANTABLE <> 'YES' OR PRIVILEGE_TYPE <> 'INSERT') END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF *GRANT UPDATE (COL1) ON VTABLE TO FLATER *The syntax for column-specific privileges is hidden in *10.3 <privileges> instead of 11.36 <grant statement> COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'VTABLE'" DISPLAY " AND GRANTOR = 'HU';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'VTABLE' AND GRANTOR = 'HU' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'VTABLE'" DISPLAY " AND GRANTOR = 'HU';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'VTABLE' AND GRANTOR = 'HU' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = - " 'VTABLE'" DISPLAY " AND GRANTOR = 'HU' AND COLUMN_NAME = 'COL1'" DISPLAY " AND PRIVILEGE_TYPE = 'UPDATE' AND" DISPLAY " IS_GRANTABLE = 'NO' AND GRANTEE = 'FLATER';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'VTABLE' AND GRANTOR = 'HU' AND COLUMN_NAME = 'COL1' AND PRIVILEGE_TYPE = 'UPDATE' AND IS_GRANTABLE = 'NO' AND GRANTEE = 'FLATER' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF *This should not be visible. COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'HU' AND TABLE_NAME = 'FF' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF *Check future grant not yet reflected COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Check visibility of new grant DISPLAY "GRANT DELETE ON BASE_WCOV TO CUGINI;" EXEC SQL GRANT DELETE ON BASE_WCOV TO CUGINI END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI'" DISPLAY " AND PRIVILEGE_TYPE = 'DELETE' AND IS_GRANTABLE = - " 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' AND PRIVILEGE_TYPE = 'DELETE' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI'" DISPLAY " AND PRIVILEGE_TYPE = 'DELETE' AND IS_GRANTABLE = - " 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' AND PRIVILEGE_TYPE = 'DELETE' AND IS_GRANTABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "REVOKE DELETE ON BASE_WCOV FROM CUGINI CASCADE;" EXEC SQL REVOKE DELETE ON BASE_WCOV FROM CUGINI CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Check that revoke also worked COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.TABLE_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.TABLE_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMN_PRIVILEGES" DISPLAY " WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = - " 'BASE_WCOV'" DISPLAY " AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMN_PRIVILEGES WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'BASE_WCOV' AND GRANTOR = 'FLATER' AND GRANTEE = 'CUGINI' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0685','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml131.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0685','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0685 ******************** ******************** BEGIN TEST0686 ******************* MOVE 1 TO flag DISPLAY " TEST0686 " DISPLAY "INFO_SCHEM: Primary key enh. is not null" DISPLAY "References:" DISPLAY " F# 2 -- Basic information schema" DISPLAY " F# 3 -- Basic schema manipulation" DISPLAY " F# 16 -- PRIMARY KEY enhancement" DISPLAY " FIPS Change Notice #1 -- Shortened - " identifiers" DISPLAY " in INFO_SCHEM" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE FEAT16 (" DISPLAY " EMPNUM INT PRIMARY KEY," DISPLAY " PNUM INT UNIQUE);" EXEC SQL CREATE TABLE FEAT16 ( EMPNUM INT PRIMARY KEY, PNUM INT UNIQUE) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *PRIMARY KEY implies NOT NULL but UNIQUE does not MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = - " 'FLATER'" DISPLAY " AND TABLE_NAME = 'FEAT16' AND COLUMN_NAME = - " 'EMPNUM'" DISPLAY " AND IS_NULLABLE = 'NO';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'FEAT16' AND COLUMN_NAME = 'EMPNUM' AND IS_NULLABLE = 'NO' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = - " 'FLATER'" DISPLAY " AND TABLE_NAME = 'FEAT16' AND COLUMN_NAME = - " 'PNUM'" DISPLAY " AND IS_NULLABLE = 'YES';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.COLUMNS WHERE TABLE_SCHEM = 'FLATER' AND TABLE_NAME = 'FEAT16' AND COLUMN_NAME = 'PNUM' AND IS_NULLABLE = 'YES' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE FEAT16 CASCADE;" EXEC SQL DROP TABLE FEAT16 CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0686','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml131.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0686','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0686 ******************** ******************** BEGIN TEST0687 ******************* MOVE 1 TO flag DISPLAY " TEST0687 " DISPLAY " INFO_SCHEM: Multiple schemas per user" DISPLAY "References:" DISPLAY " F# 2 -- Basic information schema" DISPLAY " F# 17 -- Multiple schemas per user" DISPLAY " FIPS Change Notice #1 -- Shortened - " identifiers" DISPLAY " in INFO_SCHEM" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.SCHEMATA" DISPLAY " WHERE SCHEM_NAME = 'SHIRLEY_HURWITZ' AND" DISPLAY " SCHEM_OWNER = 'FLATER';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.SCHEMATA WHERE SCHEM_NAME = 'SHIRLEY_HURWITZ' AND SCHEM_OWNER = 'FLATER' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFO_SCHEM.SCHEMATA" DISPLAY " WHERE SCHEM_NAME = 'LEN_GALLAGHER' AND" DISPLAY " SCHEM_OWNER = 'FLATER';" EXEC SQL SELECT COUNT(*) INTO :int1 FROM INFO_SCHEM.SCHEMATA WHERE SCHEM_NAME = 'LEN_GALLAGHER' AND SCHEM_OWNER = 'FLATER' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0687','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml131.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0687','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0687 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.78 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
