| products/sources/formale Sprachen/Java/openjdk-20-36_src/make/common/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: JavaCompilation.gmk Sprache: Shell |
|
||||||
|
#
# Copyright (c) 2011, 2020, Oracle and/or its affiliates. All rights reserved. # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # # This code is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License version 2 only, as # published by the Free Software Foundation. Oracle designates this # particular file as subject to the "Classpath" exception as provided # by Oracle in the LICENSE file that accompanied this code. # # This code is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # version 2 for more details (a copy is included in the LICENSE file that # accompanied this code). # # You should have received a copy of the GNU General Public License version # 2 along with this work; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. # # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA # or visit www.oracle.com if you need additional information or have any # questions. # ifndef _JAVA_COMPILATION_GMK _JAVA_COMPILATION_GMK := 1 ifeq (,$(_MAKEBASE_GMK)) $(error You must include MakeBase.gmk prior to including JavaCompilation.gmk) endif # Java compilation needs SetupJarArchive and/or SetupZipArchive, if we're # generating a jar file or a source zip. include JarArchive.gmk include ZipArchive.gmk ### ### Definitions for common release targets ### # Create classes that can run on the bootjdk TARGET_RELEASE_BOOTJDK := $(BOOT_JDK_SOURCETARGET) # Create classes that can be used in (or be a part of) the new jdk we're building TARGET_RELEASE_NEWJDK := -source $(JDK_SOURCE_TARGET_VERSION) -target $(JDK_SOURCE_TA # Create classes that can be used in JDK 8, for legacy support TARGET_RELEASE_JDK8 := --release 8 # Create classes for the new jdk, relying only on the modules of the new jdk TARGET_RELEASE_NEWJDK_UPGRADED := $(TARGET_RELEASE_NEWJDK) \ --upgrade-module-path $(JDK_OUTPUTDIR)/modules --system none define add_file_to_copy # param 1 = BUILD_MYPACKAGE # parma 2 = The source file to copy. $2_TARGET:=$2 # Remove the source prefix. $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET))) # To allow for automatic overrides, do not create a rule for a target file that # already has one ifneq ($$($1_COPY_$$($2_TARGET)), 1) $1_COPY_$$($2_TARGET) := 1 # Now we can setup the dependency that will trigger the copying. $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) : $2 $$(call LogInfo, Copying $$(patsubst $$(OUTPUTDIR)/%,%, $$@)) $$(install-file) $(CHMOD) -f ug+w $$@ # And do not forget this target $1_ALL_COPY_TARGETS += $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) endif endef # This macro is used only for properties files that are to be # copied over to the classes directory in cleaned form. # # An empty echo ensures that the input to sed always ends with a newline. # Certain implementations (e.g. Solaris) will skip the last line without # it. # # The sed expression does this: # 1. Add a backslash before any :, = or ! that do not have a backslash already. # 2. Apply the file unicode2x.sed which does a whole bunch of \u00XX to \xXX # conversions. # 3. Delete all lines starting with #. # 4. Delete empty lines. # 5. Append lines ending with \ with the next line. # 6. Remove leading and trailing white space. Note that tabs must be explicit # as sed on macosx does not understand '\t'. # 7. Replace the first \= with just =. # 8. Finally it's all sorted to create a stable output. # # It is assumed that = is the character used for separating names and values. define add_file_to_clean # param 1 = BUILD_MYPACKAGE # parma 2 = The source file to copy and clean. $2_TARGET:=$2 # Remove the source prefix. $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET))) # Now we can setup the dependency that will trigger the copying. # To allow for automatic overrides, do not create a rule for a target file that # already has one ifneq ($$($1_CLEAN_$$($2_TARGET)), 1) $1_CLEAN_$$($2_TARGET) := 1 $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) : $2 $$(call LogInfo, Cleaning $$(patsubst $$(OUTPUTDIR)/%,%, $$@)) $$(call MakeTargetDir) ( $(CAT) $$< && $(ECHO) "" ) \ | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' \ -e 's/\([^\\]\)!/\1\\!/g' -e 's/^[ ]*#.*/#/g' \ | $(SED) -f "$$(TOPDIR)/make/common/support/unicode2x.sed" \ | $(SED) -e '/^#/d' -e '/^$$$$/d' \ -e :a -e '/\\$$$$/N; s/\\\n//; ta' \ -e 's/^[ ]*//;s/[ ]*$$$$//' \ -e 's/\\=/=/' \ | $(SORT) > $$@ $(CHMOD) -f ug+w $$@ # And do not forget this target $1_ALL_COPY_CLEAN_TARGETS += $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) endif endef define remove_string $2 := $$(subst $1,,$$($2)) endef # Setup make rules for compiling Java source code to class files and/or a # resulting jar file. # # Parameter 1 is the name of the rule. This name is used as variable prefix, # and the targets generated are listed in a variable by that name. # # The target for public API digest is returned in $1_API_TARGET. # # Remaining parameters are named arguments. These include: # SMALL_JAVA:=set to false to run javac as a "big" java app # COMPILER:=bootjdk or interim, the latter is default # TARGET_RELEASE:=javac flags to set the targeted jdk release (-source/-target or --release # Defaults to $(TARGET_RELEASE_NEWJDK). # JAVAC_FLAGS:=javac flags to append to the default ones. # JAVA_FLAGS:=flags to be appended to the java launching the compiler # DISABLED_WARNINGS:=list of Xlint warnings that should be disabled # SRC:=one or more directories to search for sources. The order of the source roots # is significant. The first found file of a certain name has priority. # BIN:=store classes here # MODULE:=Name of module being compiled. If set, classes are put in BIN/MODULE. # CLASSPATH:=a list of additional entries to set as classpath to javac # INCLUDES:=myapp.foo means will only compile java files in myapp.foo or any of its sub-packag # EXCLUDES:=myapp.foo means will do not compile java files in myapp.foo or any of its sub-packa # COPY:=.prp means copy all prp files to the corresponding package in BIN. # COPY_FILES:=myapp/foo/setting.txt means copy this file over to the package myapp/foo # CLEAN:=.properties means copy and clean all properties file to the corresponding package in # CLEAN_FILES:=myapp/foo/setting.txt means clean this file over to the package myapp/foo # SRCZIP:=Create a src.zip based on the found sources and copied files. # INCLUDE_FILES:="com/sun/SolarisFoobar.java" means only compile this file! # EXCLUDE_FILES:="com/sun/SolarisFoobar.java" means do not compile this particular file! # "SolarisFoobar.java" means do not compile SolarisFoobar, wherever it is found. # EXTRA_FILES:=List of extra source files to include in compilation. Can be used to # specify files that need to be generated by other rules first. # HEADERS:=path to directory where all generated c-headers are written. # DEPENDS:=Extra dependency # KEEP_DUPS:=Do not remove duplicate file names from different source roots. # FAIL_NO_SRC:=Set to false to not fail the build if no source files are found, # default is true. # CREATE_API_DIGEST:=Set to true to use a javac plugin to generate a public API # hash which can be used for down stream dependencies to only rebuild # when the API changes. # KEEP_ALL_TRANSLATIONS:=Set to true to skip translation filtering SetupJavaCompilation = $(NamedParamsMacroTemplate) define SetupJavaCompilationBody # Verify arguments ifeq ($$($1_BIN),) $$(error Must specify BIN (in $1)) endif ifneq ($$($1_MODULE), ) $1_MODULE_SUBDIR := /$$($1_MODULE) endif $1_SAFE_NAME := $$(strip $$(subst /,_, $1)) ifeq ($$($1_SMALL_JAVA), ) # If unspecified, default to true $1_SMALL_JAVA := true endif ifeq ($$($1_COMPILER), ) # If unspecified, default to interim compiler $1_COMPILER := interim endif ifeq ($$($1_COMPILER), bootjdk) # Javac server is not available when using the bootjdk compiler. $1_JAVAC_CMD := $$(JAVAC) ifeq ($$($1_SMALL_JAVA), true) $1_FLAGS += $$(addprefix -J, $$(JAVA_FLAGS_SMALL)) endif ifeq ($$($1_JAVA_FLAGS), true) $1_FLAGS += $$(addprefix -J, $$($1_JAVA_FLAGS)) endif ifeq ($$($1_TARGET_RELEASE), ) # If unspecified, default to the new jdk we're building $1_TARGET_RELEASE := $$(TARGET_RELEASE_BOOTJDK) endif else ifeq ($$($1_COMPILER), buildjdk) $1_JAVAC_CMD := $$(BUILD_JAVAC) ifeq ($$($1_TARGET_RELEASE), ) # If unspecified, default to the new jdk we're building $1_TARGET_RELEASE := $$(TARGET_RELEASE_NEWJDK) endif else ifeq ($$($1_COMPILER), interim) # Use java server if it is enabled, and the user does not want a specialized # class path. ifeq ($$(ENABLE_JAVAC_SERVER)+$$($1_CLASSPATH), true+) # Create a configuration file with the needed information for the javac # server to function properly. $1_JAVAC_SERVER_CONFIG := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$$($1_SAFE_NAME)-jav # Arguments needed to launch the javacserver client, as well as for the # client to launch the server. $1_JAVAC_SERVER_ARGS := $$(INTERIM_LANGTOOLS_ARGS) \ -cp $(BUILDTOOLS_OUTPUTDIR)/langtools_javacserver_classes # The portfile contains the tcp/ip on which the server listens # and the cookie necessary to talk to the server. $1_JAVAC_PORT_FILE := $$(call FixPath, $$(JAVAC_SERVER_DIR)/server.port) # The javacmd tells the client how to run java to launch the server. $1_JAVAC_SERVER_JAVA_CMD := $$(call FixPath, $$(JAVA) $$($1_JAVA_FLAGS) \ $$($1_JAVAC_SERVER_ARGS)) $1_CONFIG_VARDEPS := $$($1_JAVAC_PORT_FILE) $$($1_JAVAC_SERVER_JAVA_CMD) $1_CONFIG_VARDEPS_FILE := $$(call DependOnVariable, $1_CONFIG_VARDEPS, \ $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1.config_vardeps) # Write these values to a config file $$($1_JAVAC_SERVER_CONFIG): $$($1_CONFIG_VARDEPS_FILE) $(ECHO) portfile=$$($1_JAVAC_PORT_FILE) > $$@ $(ECHO) javacmd=$$($1_JAVAC_SERVER_JAVA_CMD) >> $$@ # Always use small java to launch client $1_JAVAC_CMD := $$(JAVA_SMALL) $$($1_JAVA_FLAGS) $$($1_JAVAC_SERVER_ARGS) \ javacserver.Main --conf=$$($1_JAVAC_SERVER_CONFIG) else # No javac server $1_JAVAC := $$(INTERIM_LANGTOOLS_ARGS) -m jdk.compiler.interim/com.sun.tools.javac.M ifeq ($$($1_SMALL_JAVA), true) $1_JAVAC_CMD := $$(JAVA_SMALL) $$($1_JAVA_FLAGS) $$($1_JAVAC) else $1_JAVAC_CMD := $$(JAVA) $$($1_JAVA_FLAGS) $$($1_JAVAC) endif endif ifeq ($$($1_TARGET_RELEASE), ) # If unspecified, default to the new jdk we're building $1_TARGET_RELEASE := $$(TARGET_RELEASE_NEWJDK) endif else $$(error Invalid value for COMPILER in SetupJavaCompilation for $1: '$$($1_COMPILER)') endif # Allow overriding on the command line JAVA_WARNINGS_ARE_ERRORS ?= -Werror # Tell javac to do exactly as told and no more PARANOIA_FLAGS := -implicit:none -Xprefer:source -XDignore.symbol.file=true -encoding $1_FLAGS += -g -Xlint:all $$($1_TARGET_RELEASE) $$(PARANOIA_FLAGS) $$(JAVA_WARNINGS_AR $1_FLAGS += $$($1_JAVAC_FLAGS) ifneq ($$($1_DISABLED_WARNINGS), ) $1_FLAGS += -Xlint:$$(call CommaList, $$(addprefix -, $$($1_DISABLED_WARNINGS))) endif ifneq ($$($1_CLASSPATH), ) $1_FLAGS += -cp $$(call PathList, $$($1_CLASSPATH)) endif # Make sure the dirs exist, or that one of the EXTRA_FILES, that may not # exist yet, is in it. $$(foreach d, $$($1_SRC), \ $$(if $$(wildcard $$d), , \ $$(if $$(filter $$d%, $$($1_EXTRA_FILES)), , \ $$(error SRC specified to SetupJavaCompilation $1 contains missing directory >$$d<) \ ) \ ) \ ) $$(call MakeDir,$$($1_BIN)) # Order src files according to the order of the src dirs. Correct ordering is # needed for correct overriding between different source roots. $1_ALL_SRC_RAW := $$(call FindFiles, $$($1_SRC)) $1_ALL_SRCS := $$($1_EXTRA_FILES) \ $$(foreach d, $$($1_SRC), $$(filter $$d%, $$($1_ALL_SRC_RAW))) # Extract the java files. $1_SRCS := $$(filter %.java, $$($1_ALL_SRCS)) # Translate include/exclude into patterns ifneq ($$($1_EXCLUDE_FILES), ) $1_EXCLUDE_PATTERN := $$(addprefix %, $$($1_EXCLUDE_FILES)) endif ifneq ($$($1_INCLUDE_FILES), ) $1_INCLUDE_PATTERN := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_INCLUDE_FILES) endif ifneq ($$($1_EXCLUDES), ) $1_EXCLUDE_PATTERN += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1 endif ifneq ($$($1_INCLUDES), ) $1_INCLUDE_PATTERN += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1 endif # Apply include/exclude patterns to java sources ifneq ($$($1_EXCLUDE_PATTERN), ) $1_SRCS := $$(filter-out $$($1_EXCLUDE_PATTERN), $$($1_SRCS)) endif ifneq ($$($1_INCLUDE_PATTERN), ) $1_SRCS := $$(filter $$($1_INCLUDE_PATTERN) $$($1_EXTRA_FILES), $$($1_SRCS)) endif ifneq ($$($1_KEEP_DUPS), true) # Remove duplicate source files by keeping the first found of each duplicate. # This allows for automatic overrides with custom or platform specific versions # source files. Need to call DoubleDollar as we have java classes with '$' in # their names. $1_SRCS := $$(strip $$(foreach s, $$($1_SRCS), \ $$(eval relative_src := $$(call remove-prefixes, $$($1_SRC), \ $$(call DoubleDollar, $$(s)))) \ $$(if $$($1_$$(relative_src)), \ , \ $$(eval $1_$$(relative_src) := 1) $$(s)))) endif # Filter out any excluded translations ifneq ($$($1_KEEP_ALL_TRANSLATIONS), true) $1_SRCS := $$(call FilterExcludedTranslations, $$($1_SRCS), .java) endif ifeq ($$(strip $$($1_SRCS)), ) ifneq ($$($1_FAIL_NO_SRC), false) $$(error No source files found for $1) endif else # All files below META-INF are always copied. $1_ALL_COPIES := $$(filter $$(addsuffix /META-INF%,$$($1_SRC)),$$($1_ALL_SRCS)) # Find all files to be copied from source to bin. ifneq (,$$($1_COPY)$$($1_COPY_FILES)) # Search for all files to be copied. $1_ALL_COPIES += $$(filter $$(addprefix %,$$($1_COPY)),$$($1_ALL_SRCS)) # Copy these explicitly $1_ALL_COPIES += $$($1_COPY_FILES) endif # Copy must also respect filters. ifneq (,$$($1_INCLUDE_PATTERN)) $1_ALL_COPIES := $$(filter $$($1_INCLUDE_PATTERN),$$($1_ALL_COPIES)) endif ifneq (,$$($1_EXCLUDE_PATTERN)) $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_PATTERN),$$($1_ALL_COPIES)) endif # Filter out any excluded translations ifneq ($$($1_KEEP_ALL_TRANSLATIONS), true) $1_ALL_COPIES := $$(call FilterExcludedTranslations, $$($1_ALL_COPIES), .properties) endif ifneq (,$$($1_ALL_COPIES)) # Yep, there are files to be copied! $1_ALL_COPY_TARGETS:= $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i))) # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files! endif # Find all property files to be copied and cleaned from source to bin. ifneq (,$$($1_CLEAN)$$($1_CLEAN_FILES)) # Search for all files to be copied. $1_ALL_CLEANS := $$(filter $$(addprefix %,$$($1_CLEAN)),$$($1_ALL_SRCS)) # Clean these explicitly $1_ALL_CLEANS += $$($1_CLEAN_FILES) # Copy and clean must also respect filters. ifneq (,$$($1_INCLUDE_PATTERN)) $1_ALL_CLEANS := $$(filter $$($1_INCLUDE_PATTERN),$$($1_ALL_CLEANS)) endif ifneq (,$$($1_EXCLUDE_PATTERN)) $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_PATTERN),$$($1_ALL_CLEANS)) endif # Filter out any excluded translations ifneq ($$($1_KEEP_ALL_TRANSLATIONS), true) $1_ALL_CLEANS := $$(call FilterExcludedTranslations, $$($1_ALL_CLEANS), .properties) endif ifneq (,$$($1_ALL_CLEANS)) # Yep, there are files to be copied and cleaned! $1_ALL_COPY_CLEAN_TARGETS:= $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_clean,$1,$$i))) # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files! endif endif # Create a sed expression to remove the source roots and to replace / with . # and remove .java at the end. $1_REWRITE_INTO_CLASSES:=$$(foreach i,$$($1_SRC),-e 's|$$i/||g') -e 's|/|.|g' -e 's|.j $1_COMPILE_TARGET := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_batch $1_FILELIST := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_batch.filelist $1_MODFILELIST := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_batch.modfiles $1_MODFILELIST_FIXED := $$($1_MODFILELIST).fixed $1_API_TARGET := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi $1_API_INTERNAL := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_internalapi # Put headers in a temp dir to filter out those that actually # changed before copying them to the real header dir. ifneq (,$$($1_HEADERS)) $1_HEADERS_ARG := -h $$($1_HEADERS).$1.tmp $$($1_HEADERS)/_the.$1_headers: $$($1_COMPILE_TARGET) $$(call MakeTargetDir) if [ -d "$$($1_HEADERS).$1.tmp" ]; then \ for f in `$(CD) $$($1_HEADERS).$1.tmp && $(FIND) . -type f`; do \ if [ ! -f "$$($1_HEADERS)/$$$$f" ] \ || [ "`$(DIFF) $$($1_HEADERS)/$$$$f $$($1_HEADERS).$1.tmp/$$$$f`" != "" ]; then \ $(MKDIR) -p `$(DIRNAME) $$($1_HEADERS)/$$$$f`; \ $(CP) -f $$($1_HEADERS).$1.tmp/$$$$f $$($1_HEADERS)/$$$$f; \ fi; \ done; \ fi $(RM) -r $$($1_HEADERS).$1.tmp $(TOUCH) $$@ $1_HEADER_TARGETS := $$($1_HEADERS)/_the.$1_headers endif $1_VARDEPS := $$($1_JAVAC_CMD) $$($1_FLAGS) $$($1_BIN) \ $$($1_HEADERS_ARG) $$($1_EXCLUDES) $$($1_INCLUDES) \ $$($1_EXCLUDE_FILES) $$($1_INCLUDE_FILES) $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \ $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1.vardeps) ifeq ($$($1_CREATE_API_DIGEST), true) $1_API_DIGEST_FLAGS := \ -classpath $$(BUILDTOOLS_OUTPUTDIR)/depend \ -Xplugin:"depend $$($1_API_TARGET)" \ "-XDinternalAPIPath=$$($1_API_INTERNAL)" \ "-XDLOG_LEVEL=$(LOG_LEVEL)" \ # $1_EXTRA_DEPS := $$(BUILDTOOLS_OUTPUTDIR)/depend/_the.COMPILE_DEPEND_batch endif # Create a file with all sources, to pass to javac in an @file. # $$($1_VARDEPS_FILE) is used as dependency to track changes in set of # list of files. $$($1_FILELIST): $$($1_SRCS) $$($1_VARDEPS_FILE) $$(call MakeDir, $$(@D)) $$(call LogWarn, Compiling up to $$(words $$($1_SRCS)) files for $1) $$(eval $$(call ListPathsSafely, $1_SRCS, $$($1_FILELIST))) # Create a $$($1_MODFILELIST) file with significant modified dependencies # (either sources files or the other mark dependencies). # It is then sent using a side-channel # to the custom Depend plugin. The Depend plugin will check the provided list # of modified files, and if none of the Java source files is changed in a way # observable from outside of the file, and the list of modified files does # not include a non-Java source file, it will only compile the modified files. # Otherwise, all module's sources will be compiled. If a non-Java file is included, # it will be considered to be a significant change, and all module source will # be recompiled $$($1_MODFILELIST): $$($1_SRCS) $$($1_DEPENDS) \ $$($1_VARDEPS_FILE) $$($1_EXTRA_DEPS) $$($1_JAVAC_SERVER_CONFIG) $$(eval $1_MODFILES := $$?) $$(eval $$(call ListPathsSafely, $1_MODFILES, $$($1_MODFILELIST))) # Convert the paths in the MODFILELIST file to Windows-style paths # on Windows. This is needed because javac operates on Windows-style paths # when running on Windows. On other platforms this just copies the MODFILELIST file. $$($1_MODFILELIST_FIXED): $$($1_MODFILELIST) $$(call FixPathFile, $$($1_MODFILELIST), $$($1_MODFILELIST_FIXED)) # Do the actual compilation $$($1_COMPILE_TARGET): $$($1_SRCS) $$($1_FILELIST) $$($1_DEPENDS) \ $$($1_VARDEPS_FILE) $$($1_EXTRA_DEPS) $$($1_JAVAC_SERVER_CONFIG) \ $$($1_MODFILELIST_FIXED) $$(call MakeDir, $$(@D)) $$(call ExecuteWithLog, $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$$($1_SAFE_NAME)_batch $$($1_JAVAC_CMD) $$($1_FLAGS) \ $$($1_API_DIGEST_FLAGS) \ -XDmodifiedInputs=$$($1_MODFILELIST_FIXED) \ -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_FILELIST)) && \ $(TOUCH) $$@ # Add all targets to main variable $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_COMPILE_TARGET) \ $$($1_HEADER_TARGETS) # Check if a jar file was specified, then setup the rules for the jar. ifneq (,$$($1_JAR)) # If no suffixes was explicitly set for this jar file. # Use class and the cleaned/copied properties file suffixes as the default # for the types of files to be put into the jar. ifeq (,$$($1_SUFFIXES)) $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY) endif $$(eval $$(call SetupJarArchive, ARCHIVE_$1, \ DEPENDENCIES:=$$($1), \ SRCS:=$$($1_BIN)$$($1_MODULE_SUBDIR), \ SUFFIXES:=$$($1_SUFFIXES), \ EXCLUDE:=$$($1_EXCLUDES), \ INCLUDES:=$$($1_INCLUDES), \ EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS), \ JAR:=$$($1_JAR), \ JARMAIN:=$$($1_JARMAIN), \ MANIFEST:=$$($1_MANIFEST), \ EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR), \ JARINDEX:=$$($1_JARINDEX), \ HEADERS:=$$($1_HEADERS), \ )) # Add jar to target list $1 += $$($1_JAR) endif # Check if a srczip was specified, then setup the rules for the srczip. ifneq (,$$($1_SRCZIP)) $$(eval $$(call SetupZipArchive, ZIP_ARCHIVE_$1, \ SRC:=$$($1_SRC), \ ZIP:=$$($1_SRCZIP), \ INCLUDES:=$$($1_INCLUDES), \ EXCLUDES:=$$($1_EXCLUDES), \ EXCLUDE_FILES:=$$($1_EXCLUDE_FILES))) # Add zip to target list $1 += $$($1_SRCZIP) endif endif # Source files found endef # Use this macro to find the correct target to depend on when the original # SetupJavaCompilation is declared in a different makefile, to avoid having # to declare and evaluate it again. # param 1 is for example BUILD_MYPACKAGE # param 2 is the output directory (BIN) SetupJavaCompilationCompileTarget = \ $(strip $2)/_the.$(strip $1)_batch SetupJavaCompilationApiTarget = \ $(strip $2)/_the.$(strip $1)_pubapi endif # _JAVA_COMPILATION_GMK ¤ Dauer der Verarbeitung: 0.20 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
