| products/sources/formale sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: xts749.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML099. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "DML099.SCO") calling SQL * procedures in file "DML099.MCO". **************************************************************** * * COMMENT SECTION * * DATE 1993/07/19 STANDARD COBOL LANGUAGE * NIST SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML099.SCO * WRITTEN BY: David W. Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * This routine tests FIPS sizing for Dynamic SQL character * strings and also tests feature 9 of Transitional SQL, * implicit numeric casting. Features 1 and 3 are required as * part of "baseline" TSQL. * * REFERENCES * FIPS PUB 127-2 14.1 Transitional SQL * 16.6 Sizing for database constructs * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 x1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 x2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 x3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 s1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE. 01 f1 PIC S9(4)V9(4) DISPLAY SIGN LEADING SEPARATE. 01 str240 PIC X(240). 01 str241 PIC X(240). 01 dstmt PIC X(50). * EXEC SQL END DECLARE SECTION END-EXEC 01 VVVVV. 05 V1 PIC X(48). 05 V2 PIC X(48). 05 V3 PIC X(48). 05 V4 PIC X(48). 05 V5 PIC X(48). 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid " expected. User ", uidx " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, dml099.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0581 ******************* MOVE 1 TO flag DISPLAY " TEST0581 " DISPLAY "Implicit numeric casting (feature 9) dynamic" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features - " 1, 3, 9" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "dstmt=""CREATE TABLE ICAST (C1 INT, C2 REAL, C3 - " DEC(6,2))""" MOVE "CREATE TABLE ICAST (C1 INT, C2 REAL, C3 DEC(6,2)) " TO dstmt DISPLAY "EXECUTE IMMEDIATE :dstmt;" * EXEC SQL EXECUTE IMMEDIATE :dstmt; CALL "SUB3" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB4" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "dstmt=""INSERT INTO ICAST VALUES (.31416E+1, 3, - " .3141593E+1)""" MOVE "INSERT INTO ICAST VALUES - " (.31416E+1,3,.3141593E+1)" TO dstmt DISPLAY "EXECUTE IMMEDIATE :dstmt;" * EXEC SQL EXECUTE IMMEDIATE :dstmt; CALL "SUB5" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "dstmt=""SELECT C1, C2, C3 FROM ICAST""" MOVE "SELECT C1, C2, C3 FROM ICAST " TO dstmt DISPLAY "PREPARE IC1 FROM :dstmt" * EXEC SQL PREPARE IC1 FROM :dstmt; CALL "SUB6" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DECLARE CIC1 CURSOR FOR IC1;" * EXEC SQL DECLARE CIC1 CURSOR FOR IC1 END-EXEC DISPLAY " " DISPLAY "OPEN CIC1;" * EXEC SQL OPEN CIC1; CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE x3 = -1 DISPLAY "FETCH CIC1 INTO :x1, :x2, :x3;" * EXEC SQL FETCH CIC1 INTO :x1, :x2, :x3; CALL "SUB8" USING SQLCODE SQLSTATE x1 x2 x3 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "x1 should be 3; its value is ", x1 DISPLAY "x2 should be 3; its value is ", x2 DISPLAY "x3 should be 3; its value is ", x3 if (x1 NOT = 3 OR x2 NOT = 3 OR x3 NOT = 3) then MOVE 0 TO flag END-IF *The following <dynamic update statement: positioned> contains *what is effectively a static reference to a table which will *not exist at compile time and which is dynamically created abov MOVE 5.24 TO f1 DISPLAY "f1 = 5.24" DISPLAY "UPDATE ICAST" DISPLAY " SET C1 = 5.2413E+0, C2 = 5.2413E+0, C3 = :f1" DISPLAY " WHERE CURRENT OF CIC1;" * EXEC SQL UPDATE ICAST * SET C1 = 5.2413E+0, C2 = 5.2413E+0, C3 = :f1 * WHERE CURRENT OF CIC1; CALL "SUB9" USING SQLCODE SQLSTATE f1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE f1 = -1 DISPLAY "CLOSE CIC1;" DISPLAY "OPEN CIC1;" DISPLAY "FETCH CIC1 INTO :f1, :x1, :x2;" * EXEC SQL CLOSE CIC1; CALL "SUB10" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL OPEN CIC1; CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH CIC1 INTO :f1, :x1, :x2; CALL "SUB12" USING SQLCODE SQLSTATE f1 x1 x2 MOVE SQLCODE TO SQL-COD COMPUTE x3 = 100 * f1 PERFORM CHCKOK DISPLAY "f1*100 should be 500; its value is ", x3 DISPLAY "x1 should be 5; its value is ", x1 DISPLAY "x2 should be 5; its value is ", x2 if (x3 NOT = 500 OR x1 NOT = 5 OR x2 NOT = 5) then MOVE 0 TO flag END-IF *Avoid possible cursor operation conflict DISPLAY "CLOSE CIC1;" * EXEC SQL CLOSE CIC1; CALL "SUB13" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD MOVE 6.28 TO f1 DISPLAY "dstmt=""UPDATE ICAST SET C1 = ?, C2 = 6.29E+0, C3 - " = 6.29E+0""" MOVE "UPDATE ICAST SET C1 = ?, C2 =6.29E+0, C3 = - " 6.29E+0" TO dstmt DISPLAY "PREPARE F1 FROM :dstmt;" * EXEC SQL PREPARE F1 FROM :dstmt; CALL "SUB14" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD DISPLAY "EXECUTE F1 USING :f1;" * EXEC SQL EXECUTE F1 USING :f1; CALL "SUB15" USING SQLCODE SQLSTATE f1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE f1 = -1 DISPLAY "OPEN CIC1;" DISPLAY "FETCH CIC1 INTO :x1, :x2, :f1;" * EXEC SQL OPEN CIC1; CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH CIC1 INTO :x1, :x2, :f1; CALL "SUB17" USING SQLCODE SQLSTATE x1 x2 f1 MOVE SQLCODE TO SQL-COD COMPUTE x3 = 100 * f1 PERFORM CHCKOK DISPLAY "x1 should be 6; its value is ", x1 DISPLAY "x2 should be 6; its value is ", x2 DISPLAY "f1 * 100 should be 628 or 629; its value is ", x3 if (x1 NOT = 6 OR x2 NOT = 6 OR x3 < 628 OR x3 > 629) then MOVE 0 TO flag END-IF *FINIS DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD DISPLAY "dstmt=""DROP TABLE ICAST CASCADE""" MOVE "DROP TABLE ICAST CASCADE " TO dstmt DISPLAY "EXECUTE IMMEDIATE :dstmt;" * EXEC SQL EXECUTE IMMEDIATE :dstmt; CALL "SUB19" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB20" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0581','pass','MCO'); CALL "SUB21" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml099.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0581','fail','MCO'); CALL "SUB22" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB23" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0581 ******************** ******************** BEGIN TEST0582 ******************* MOVE 1 TO flag DISPLAY " TEST0582 " DISPLAY "Implicit numeric casting (feature 9) static" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature - " 9" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE ICAST2" DISPLAY " (C1 SMALLINT, C2 DOUBLE PRECISION, C3 - " NUMERIC(5,3));" * EXEC SQL CREATE TABLE ICAST2 * (C1 SMALLINT, C2 DOUBLE PRECISION, C3 NUMERIC(5,3)) * ; CALL "SUB24" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB25" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO ICAST2 VALUES (.31416E+1, 3, - " .3141593E+1);" * EXEC SQL INSERT INTO ICAST2 VALUES (.31416E+1, 3, * .3141593E+1); CALL "SUB26" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE f1 = -1 COMPUTE s1 = -1 COMPUTE x2 = -1 DISPLAY "SELECT C1, C2, C3 INTO :f1, :s1, :x2 FROM ICAST2;" * EXEC SQL SELECT C1, C2, C3 INTO :f1, :s1, :x2 FROM ICAST2 * ; CALL "SUB27" USING SQLCODE SQLSTATE f1 s1 x2 MOVE SQLCODE TO SQL-COD COMPUTE x3 = f1 * 100 PERFORM CHCKOK DISPLAY "f1 * 100 should be 300; its value is ", x3 DISPLAY "s1 should be 3; its value is ", s1 DISPLAY "x2 should be 3; its value is ", x2 if (x3 NOT = 300 OR s1 NOT = 3 OR x2 NOT = 3) then MOVE 0 TO flag END-IF DISPLAY "DECLARE CIC2 CURSOR FOR" DISPLAY " SELECT C1, C2, C3 FROM ICAST2;" * EXEC SQL DECLARE CIC2 CURSOR FOR * SELECT C1, C2, C3 FROM ICAST2 END-EXEC DISPLAY " " DISPLAY "OPEN CIC2;" * EXEC SQL OPEN CIC2; CALL "SUB28" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE f1 = -1 DISPLAY "FETCH CIC2 INTO :x1, :x2, :f1;" * EXEC SQL FETCH CIC2 INTO :x1, :x2, :f1; CALL "SUB29" USING SQLCODE SQLSTATE x1 x2 f1 MOVE SQLCODE TO SQL-COD COMPUTE x3 = f1 * 100 PERFORM CHCKOK DISPLAY "x1 should be 3; its value is ", x1 DISPLAY "x2 should be 3; its value is ", x2 DISPLAY "f1 * 100 should be 314; its value is ", x3 if (x1 NOT = 3 OR x2 NOT = 3 OR x3 NOT = 314) then MOVE 0 TO flag END-IF MOVE 5.24 TO f1 DISPLAY "UPDATE ICAST2" DISPLAY " SET C1 = :f1, C2 = 5, C3 = 5.2413E+0" DISPLAY " WHERE CURRENT OF CIC2;" * EXEC SQL UPDATE ICAST2 * SET C1 = :f1, C2 = 5, C3 = 5.2413E+0 * WHERE CURRENT OF CIC2; CALL "SUB30" USING SQLCODE SQLSTATE f1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE f1 = -1 DISPLAY "CLOSE CIC2;" DISPLAY "OPEN CIC2;" DISPLAY "FETCH CIC2 INTO :x1, :x2, :f1;" * EXEC SQL CLOSE CIC2; CALL "SUB31" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL OPEN CIC2; CALL "SUB28" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH CIC2 INTO :x1, :x2, :f1; CALL "SUB33" USING SQLCODE SQLSTATE x1 x2 f1 MOVE SQLCODE TO SQL-COD COMPUTE x3 = 100 * f1 PERFORM CHCKOK DISPLAY "x1 should be 5; its value is ", x1 DISPLAY "x2 should be 5; its value is ", x2 DISPLAY "f1 * 100 should be 524; its value is ", x3 if (x1 NOT = 5 OR x2 NOT = 5 OR x3 NOT = 524) then MOVE 0 TO flag END-IF *Avoid possible cursor operation conflict DISPLAY "CLOSE CIC2;" * EXEC SQL CLOSE CIC2; CALL "SUB34" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD MOVE 7.03 TO f1 DISPLAY "f1 = 7.03" DISPLAY "UPDATE ICAST2 SET C1 = 6.28E+0, C2 = 2.1E+0, C3 = - " :f1;" * EXEC SQL UPDATE ICAST2 SET C1 = 6.28E+0, C2 = 2.1E+0, C3 = * :f1; CALL "SUB35" USING SQLCODE SQLSTATE f1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "UPDATE ICAST2 SET C1 = C2, C3 = C3 + C2;" * EXEC SQL UPDATE ICAST2 SET C1 = C2, C3 = C3 + C2; CALL "SUB36" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE x1 = -1 COMPUTE x2 = -1 COMPUTE f1 = -1 DISPLAY "OPEN CIC2;" DISPLAY "FETCH CIC2 INTO :f1, :x1, :x2;" * EXEC SQL OPEN CIC2; CALL "SUB28" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD * EXEC SQL FETCH CIC2 INTO :f1, :x1, :x2; CALL "SUB38" USING SQLCODE SQLSTATE f1 x1 x2 MOVE SQLCODE TO SQL-COD COMPUTE x3 = 100 * f1 PERFORM CHCKOK DISPLAY "f1 * 100 should be 200; its value is ", x3 DISPLAY "x1 should be 2; its value is ", x1 DISPLAY "x2 should be 9; its value is ", x2 if (x3 NOT = 200 OR x1 NOT = 2 OR x2 NOT = 9) then MOVE 0 TO flag END-IF *FINIS DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB39" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD DISPLAY "DROP TABLE ICAST2 CASCADE;" * EXEC SQL DROP TABLE ICAST2 CASCADE; CALL "SUB40" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB41" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0582','pass','MCO'); CALL "SUB42" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml099.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0582','fail','MCO'); CALL "SUB43" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB44" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0582 ******************** ******************** BEGIN TEST0583 ******************* MOVE 1 TO flag DISPLAY " TEST0583 " DISPLAY " FIPS sizing, Dynamic SQL character strings" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features - " 1, 3" DISPLAY " 16.6 Sizing for database - " constructs" DISPLAY " Test 0222 (DML047)" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "dstmt=""CREATE TABLE T240 (STR240 CHAR (240))""" MOVE "CREATE TABLE T240 (STR240 CHAR (240)) " TO dstmt DISPLAY "EXECUTE IMMEDIATE :dstmt;" * EXEC SQL EXECUTE IMMEDIATE :dstmt; CALL "SUB45" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB46" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE "NOTE: Additional SQL language is planned for la" TO V1 MOVE "ter addenda to this standard. Major topics unde" TO V2 MOVE "r consideration for such addenda include deducti" TO V3 MOVE "ve logic, Einsteinian relativity for datetime ar" TO V4 MOVE "ithmetic, and real time constraints on joins ;->" TO V5 MOVE VVVVV TO str240 DISPLAY "str240=", str240 " " DISPLAY "dstmt=""INSERT INTO T240 VALUES (?)""" MOVE "INSERT INTO T240 VALUES (?) " TO dstmt DISPLAY "PREPARE PT240 FROM :dstmt;" * EXEC SQL PREPARE PT240 FROM :dstmt; CALL "SUB47" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "EXECUTE PT240 USING :str240;" * EXEC SQL EXECUTE PT240 USING :str240; CALL "SUB48" USING SQLCODE SQLSTATE str240 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "dstmt=""SELECT * FROM T240""" MOVE "SELECT * FROM T240 - " " TO dstmt DISPLAY "PREPARE UT240 FROM :dstmt;" * EXEC SQL PREPARE UT240 FROM :dstmt; CALL "SUB49" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DECLARE CT240 CURSOR FOR UT240;" * EXEC SQL DECLARE CT240 CURSOR FOR UT240 END-EXEC DISPLAY " " MOVE "xxxxxx" TO str241 DISPLAY "OPEN CT240;" * EXEC SQL OPEN CT240; CALL "SUB50" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "FETCH CT240 INTO :str241;" * EXEC SQL FETCH CT240 INTO :str241; CALL "SUB51" USING SQLCODE SQLSTATE str241 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " str241=", str241 " " DISPLAY "Should be identical to str240 above." if (str240 NOT = str241) then MOVE 0 TO flag END-IF *FINIS DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB52" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD DISPLAY "dstmt=""DROP TABLE T240 CASCADE""" MOVE "DROP TABLE T240 CASCADE " TO dstmt DISPLAY "EXECUTE IMMEDIATE :dstmt;" * EXEC SQL EXECUTE IMMEDIATE :dstmt; CALL "SUB53" USING SQLCODE SQLSTATE dstmt MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB54" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0583','pass','MCO'); CALL "SUB55" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml099.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0583','fail','MCO'); CALL "SUB56" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB57" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0583 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.45 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
