| products/sources/formale sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: sdl030.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. SDL030. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "SDL030.SCO") calling SQL * procedures in file "SDL030.MCO". * STANDARD COBOL (file "SDL030.SCO") **************************************************************** * * COMMENT SECTION * * DATE 1992/06/11 STANDARD COBOL LANGUAGE * NIST SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * SDL030.SCO * WRITTEN BY: DAVID W. FLATER * * THIS ROUTINE TESTS THE SCHEMA DEFINITION LANGUAGE FOR SQL. * * REFERENCES * ANSI SQL-1992 * 11.36 <grant statement> * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 tmpint PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 uid PIC X(18). 01 uidx PIC X(18). 01 tmpcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "SCHANZLE" TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO; CALL "SUB1" USING SQLCODE uidx MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid " expected. User ", uidx " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Standard COBOL, sdl030. - "pco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0464 ******************* MOVE 1 TO flag DISPLAY " TEST0464 " DISPLAY " Priv.violation: GRANT only SELECT to PUBLIC" DISPLAY "Reference ANSI SQL-1992 11.36 DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE tmpint = -99 DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.EE;" * EXEC SQL SELECT INTTEST * INTO :tmpint FROM CUGINI.EE; CALL "SUB2" USING SQLCODE tmpint MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be 0; its value is ", ii DISPLAY "tmpint should be 0; its value is ", tmpint if (ii NOT = 0 OR tmpint NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "INSERT INTO CUGINI.EE VALUES (9);" * EXEC SQL INSERT INTO CUGINI.EE * VALUES (9); CALL "SUB3" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;" COMPUTE tmpcnt = -1 * EXEC SQL SELECT COUNT(*) INTO :tmpcnt * FROM CUGINI.EE; CALL "SUB4" USING SQLCODE tmpcnt MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be 0; its value is ", ii DISPLAY "COUNT should be 1; its value is ", tmpcnt if (ii NOT = 0 OR tmpcnt NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "UPDATE CUGINI.EE" DISPLAY " SET INTTEST = 1;" * EXEC SQL UPDATE CUGINI.EE * SET INTTEST = 1; CALL "SUB5" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SELECT COUNT(*) FROM CUGINI.EE WHERE INTTEST = 1;" COMPUTE tmpcnt = -1 * EXEC SQL SELECT COUNT(*) INTO :tmpcnt * FROM CUGINI.EE WHERE INTTEST = 1; CALL "SUB6" USING SQLCODE tmpcnt MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be 0; its value is ", ii DISPLAY "COUNT should be 0; its value is ", tmpcnt if (ii NOT = 0 OR tmpcnt NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "DELETE FROM CUGINI.EE;" * EXEC SQL DELETE FROM CUGINI.EE; CALL "SUB7" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;" COMPUTE tmpcnt = -1 * EXEC SQL SELECT COUNT(*) INTO :tmpcnt FROM CUGINI.EE * ; CALL "SUB8" USING SQLCODE tmpcnt MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be 0; its value is ", ii DISPLAY "COUNT should be 1; its value is ", tmpcnt if (ii NOT = 0 OR tmpcnt NOT = 1) then MOVE 0 TO flag END-IF * EXEC SQL ROLLBACK WORK; CALL "SUB9" USING SQLCODE MOVE SQLCODE TO SQL-COD if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0464','pass','MCO'); CALL "SUB10" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " sdl030.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0464','fail','MCO'); CALL "SUB11" USING SQLCODE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB12" USING SQLCODE MOVE SQLCODE TO SQL-COD ******************** END TEST0464 ******************** ******************** BEGIN TEST0465 ******************* MOVE 1 TO flag DISPLAY " TEST0465 " DISPLAY " Priv.violation: GRANT only INSERT to PUBLIC" DISPLAY "Reference ANSI SQL-1992 11.36 DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY "INSERT INTO CUGINI.FF VALUES (-99);" * EXEC SQL INSERT INTO CUGINI.FF * VALUES (-99); CALL "SUB13" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be = 0; its value is ", ii if (ii NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO tmpint DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.FF;" * EXEC SQL SELECT INTTEST INTO :tmpint FROM CUGINI.FF * ; CALL "SUB14" USING SQLCODE tmpint MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii DISPLAY "tmpint should NOT be -99; its value is ", tmpint if (ii NOT < 0 OR tmpint = -99) then MOVE 0 TO flag END-IF DISPLAY "UPDATE CUGINI.FF SET INTTEST = 1;" * EXEC SQL UPDATE CUGINI.FF * SET INTTEST = 1; CALL "SUB15" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "DELETE FROM CUGINI.FF;" * EXEC SQL DELETE FROM CUGINI.FF; CALL "SUB16" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF * EXEC SQL ROLLBACK WORK; CALL "SUB17" USING SQLCODE MOVE SQLCODE TO SQL-COD if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0465','pass','MCO'); CALL "SUB18" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " sdl030.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0465','fail','MCO'); CALL "SUB19" USING SQLCODE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB20" USING SQLCODE MOVE SQLCODE TO SQL-COD ******************** END TEST0465 ******************** ******************** BEGIN TEST0466 ******************* MOVE 1 TO flag DISPLAY " TEST0466 " DISPLAY " Priv.violation: GRANT only UPDATE to PUBLIC" DISPLAY "Reference ANSI SQL-1992 11.36 DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY "UPDATE CUGINI.GG" DISPLAY " SET C1 = 3;" * EXEC SQL UPDATE CUGINI.GG * SET C1 = 3; CALL "SUB21" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be = 0; its value is ", ii if (ii NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "SELECT C1 INTO :tmpint FROM CUGINI.GG;" COMPUTE tmpint = -1 * EXEC SQL SELECT C1 * INTO :tmpint FROM CUGINI.GG; CALL "SUB22" USING SQLCODE tmpint MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii DISPLAY "tmpint should NOT be 1 or 3; its value is ", tmpint if (ii NOT < 0 OR tmpint = 1 OR tmpint = 3) then MOVE 0 TO flag END-IF DISPLAY "INSERT INTO CUGINI.GG VALUES (-99);" * EXEC SQL INSERT INTO CUGINI.GG * VALUES (-99); CALL "SUB23" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "DELETE FROM CUGINI.GG;" * EXEC SQL DELETE FROM CUGINI.GG; CALL "SUB24" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF * EXEC SQL ROLLBACK WORK; CALL "SUB25" USING SQLCODE MOVE SQLCODE TO SQL-COD if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0466','pass','MCO'); CALL "SUB26" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " sdl030.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0466','fail','MCO'); CALL "SUB27" USING SQLCODE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB28" USING SQLCODE MOVE SQLCODE TO SQL-COD ******************** END TEST0466 ******************** ******************** BEGIN TEST0467 ******************* MOVE 1 TO flag DISPLAY " TEST0467 " DISPLAY " Priv.violation: GRANT only DELETE to PUBLIC" DISPLAY "Reference ANSI SQL-1992 11.36 DISPLAY " - - - - - - - - - - - - - - - - - - -" DISPLAY "DELETE FROM CUGINI.HH;" * EXEC SQL DELETE FROM CUGINI.HH; CALL "SUB29" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be = 0; its value is ", ii if (ii NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "INSERT INTO CUGINI.HH VALUES (99);" * EXEC SQL INSERT INTO CUGINI.HH * VALUES (99); CALL "SUB30" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF COMPUTE tmpint = -1 DISPLAY "SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH;" * EXEC SQL SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH * ; CALL "SUB31" USING SQLCODE tmpint MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii DISPLAY "tmpint should NOT be 2 or 99; its value is ", tmpint if (ii NOT < 0 OR tmpint = 2 OR tmpint = 99) then MOVE 0 TO flag END-IF DISPLAY "UPDATE CUGINI.HH SET SMALLTEST = -99;" * EXEC SQL UPDATE CUGINI.HH * SET SMALLTEST = -99; CALL "SUB32" USING SQLCODE MOVE SQLCODE TO SQL-COD MOVE SQLCODE TO ii DISPLAY "SQLCODE should be < 0; its value is ", ii if (ii NOT < 0) then MOVE 0 TO flag END-IF * EXEC SQL ROLLBACK WORK; CALL "SUB33" USING SQLCODE MOVE SQLCODE TO SQL-COD if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0467','pass','MCO'); CALL "SUB34" USING SQLCODE MOVE SQLCODE TO SQL-COD else DISPLAY " sdl030.sco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0467','fail','MCO'); CALL "SUB35" USING SQLCODE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB36" USING SQLCODE MOVE SQLCODE TO SQL-COD ******************** END TEST0467 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements ¤ Dauer der Verarbeitung: 0.26 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
