| products/sources/formale sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: dml157.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS739. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "XTS739.SCO") calling SQL * procedures in file "XTS739.MCO". *Copyright 1995 National Computing Centre Limited *and Computer Logic R&D S.A *on behalf of the CTS5 SQL2 Project. *All rights reserved. *The CTS5 SQL2 Project is sponsored by the European Community. * *The National Computing Centre Limited and Computer Logic R&D *have given permission to NIST to distribute this program *over the World Wide Web in order to promote SQL standards. *DISCLAIMER: *This program was reviewed by employees of NIST for *conformance to the SQL standards. *NIST assumes no responsibility for any party's use of *this program. **************************************************************** * * COMMENT SECTION * * SQL VALIDATION TEST SUITE V6.0 * * XTS739.SCO TEST7039 * WRITTEN BY: Nickos Backalidis * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * Scrolled cursor with ORDER BY int, name ASC, * FETCH FIRST, FETCH LAST * * REFERENCES * 13.1 -- <Declare cursor> * 13.1 SR.10b * 13.1 GR.3 * 13.3 -- <fetch statement> * 13.3 GR.2b * 13.3 GR.2c * F#43 -- Scrolled cursors * F#24 -- Keyword relaxations * * DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test * * Cleanups and fixes by V. Kogakis 07/12/95 * Print timestamp * Include Files * Define NOSUBCLASS/CHCKOK at test beginning * * QA STATUS : FC * * Revised by DWF 1996-02-09 * Removed status checks after cursor declarations * Fixed checks for wrong SQLCODE * Fixed char string lengths **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 varnm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 varch1 PIC X(10). 01 varnm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 varch2 PIC X(10). * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "CTS1 " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts739.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST7039 ******************* MOVE 1 TO flag DISPLAY " TEST7039" DISPLAY " Scrolled cursor with ORDER BY int, name ASC," DISPLAY "FETCH FIRST,FETCH LAST" DISPLAY "References " DISPLAY " 13.1 -- DISPLAY " 13.1 SR.10b" DISPLAY " 13.1 GR.3 " DISPLAY " 13.3 -- DISPLAY " 13.3 GR.2b " DISPLAY " 13.3 GR.2c " DISPLAY " F#43 -- Scrolled cursors" DISPLAY " F#24 -- Keyword relaxations " DISPLAY " - - - - - - - - - - - - - - - - - - -" *initialise error reporting variables COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *USE table CTS1.CL_STANDARD from the standard schema *declare a scrolled cursor with ORDER BY int,name *ASC and FETCH FIRST, FETCH LAST DISPLAY "DECLARE a SCROLL CURSOR " DISPLAY "FOR SELECT COL_NUM1, COL_CH1, COL_NUM2, COL_CH2" DISPLAY "FROM CL_STANDARD ORDER BY 4, COL_CH1 ASC;" * EXEC SQL DECLARE a SCROLL CURSOR * FOR SELECT COL_NUM1,COL_CH1,COL_NUM2,COL_CH2 * FROM CL_STANDARD ORDER BY 4, COL_CH1 ASC END-EXEC DISPLAY "OPEN a;" * EXEC SQL OPEN a; CALL "SUB3" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *start fetching rows in the cursor 5 in total *in reverse order *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch last row from CL_STANDARD DISPLAY "FETCH LAST FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH LAST FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB4" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB5" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB6" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1002; its value is ", varnm1 DISPLAY "COL_CH1 should be MAKIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4002; its value is ", varnm2 DISPLAY "COL_CH2 should be HANIA; its value is ", varch2 if (varnm1 NOT = 1002 OR varnm2 NOT = 4002) then MOVE 0 TO flag END-IF if (varch2 NOT = "HANIA" OR varch1 NOT = "MAKIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB7" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1000; its value is ", varnm1 DISPLAY "COL_CH1 should be NICKOS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4000; its value is ", varnm2 DISPLAY "COL_CH2 should be ATHENS; its value is ", varch2 if (varnm1 NOT = 1000 OR varnm2 NOT = 4000) then MOVE 0 TO flag END-IF if (varch2 NOT = "ATHENS" OR varch1 NOT = "NICKOS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB8" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1003; its value is ", varnm1 DISPLAY "COL_CH1 should be GEORGE; its value is ", varch1 DISPLAY "COL_NUM2 should be 4003; its value is ", varnm2 DISPLAY "COL_CH2 should be ARTA; its value is ", varch2 if (varnm1 NOT = 1003 OR varnm2 NOT = 4003) then MOVE 0 TO flag END-IF if (varch2 NOT = "ARTA" OR varch1 NOT = "GEORGE") then MOVE 0 TO flag END-IF DISPLAY " " *** attempt to read the row before the first row *** and check that a completion condition of no data *** will be raised indicated by SQLSTATE = "02000" DISPLAY "FETCH PRIOR FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB9" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD if (SQLCODE NOT = 100) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *** FETCH LAST ROW again ** DISPLAY "FETCH LAST FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH LAST FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB10" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *Now retrieve the first row of the table DISPLAY "FETCH FIRST FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH FIRST FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB11" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1003; its value is ", varnm1 DISPLAY "COL_CH1 should be GEORGE; its value is ", varch1 DISPLAY "COL_NUM2 should be 4003; its value is ", varnm2 DISPLAY "COL_CH2 should be ARTA; its value is ", varch2 if (varnm1 NOT = 1003 OR varnm2 NOT = 4003) then MOVE 0 TO flag END-IF if (varch2 NOT = "ARTA" OR varch1 NOT = "GEORGE") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *now retrieve the rest of the rows but from first to last *fetch orientation. Fetch the second row DISPLAY "FETCH NEXT FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB12" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1000; its value is ", varnm1 DISPLAY "COL_CH1 should be NICKOS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4000; its value is ", varnm2 DISPLAY "COL_CH2 should be ATHENS; its value is ", varch2 if (varnm1 NOT = 1000 OR varnm2 NOT = 4000) then MOVE 0 TO flag END-IF if (varch2 NOT = "ATHENS" OR varch1 NOT = "NICKOS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch next row DISPLAY "FETCH NEXT FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB13" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1002; its value is ", varnm1 DISPLAY "COL_CH1 should be MAKIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4002; its value is ", varnm2 DISPLAY "COL_CH2 should be HANIA; its value is ", varch2 if (varnm1 NOT = 1002 OR varnm2 NOT = 4002) then MOVE 0 TO flag END-IF if (varch2 NOT = "HANIA" OR varch1 NOT = "MAKIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch next row DISPLAY "FETCH NEXT FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB14" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch final row DISPLAY "FETCH NEXT FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB15" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *** attempt to read the next row after the last row *** and check that a completion condition of no data *** will be raised indicated by SQLSTATE = "02000" DISPLAY "FETCH NEXT FROM a INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM a INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB16" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD if (SQLCODE NOT = 100) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "CLOSE a;" * EXEC SQL CLOSE a; CALL "SUB17" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *********** Start tests with numeric cursor ********** *USE table CTS1.CL_STANDARD from the standard schema *declare a scrolled cursor with ORDER BY int,name *ASC and FETCH FIRST, FETCH LAST *with numeric sort key this time DISPLAY "DECLARE b SCROLL CURSOR " DISPLAY "FOR SELECT COL_NUM1, COL_CH1, COL_NUM2, COL_CH2" DISPLAY "FROM CL_STANDARD" DISPLAY "ORDER BY 3, COL_NUM1 ASC;" * EXEC SQL DECLARE b SCROLL CURSOR * FOR SELECT COL_NUM1,COL_CH1,COL_NUM2,COL_CH2 * FROM CL_STANDARD * ORDER BY 3, COL_NUM1 ASC END-EXEC DISPLAY "OPEN b;" * EXEC SQL OPEN b; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *start fetching rows in the cursor 5 in total *in reverse order *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch last row from CL_STANDARD DISPLAY "FETCH LAST FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH LAST FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB19" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB20" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1003; its value is ", varnm1 DISPLAY "COL_CH1 should be GEORGE; its value is ", varch1 DISPLAY "COL_NUM2 should be 4003; its value is ", varnm2 DISPLAY "COL_CH2 should be ARTA; its value is ", varch2 if (varnm1 NOT = 1003 OR varnm2 NOT = 4003) then MOVE 0 TO flag END-IF if (varch2 NOT = "ARTA" OR varch1 NOT = "GEORGE") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB21" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1002; its value is ", varnm1 DISPLAY "COL_CH1 should be MAKIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4002; its value is ", varnm2 DISPLAY "COL_CH2 should be HANIA; its value is ", varch2 if (varnm1 NOT = 1002 OR varnm2 NOT = 4002) then MOVE 0 TO flag END-IF if (varch2 NOT = "HANIA" OR varch1 NOT = "MAKIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB22" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch previous row DISPLAY "FETCH PRIOR FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB23" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1000; its value is ", varnm1 DISPLAY "COL_CH1 should be NICKOS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4000; its value is ", varnm2 DISPLAY "COL_CH2 should be ATHENS; its value is ", varch2 if (varnm1 NOT = 1000 OR varnm2 NOT = 4000) then MOVE 0 TO flag END-IF if (varch2 NOT = "ATHENS" OR varch1 NOT = "NICKOS") then MOVE 0 TO flag END-IF DISPLAY " " *** attempt to read the row before the first row *** and check that a completion condition of no data *** will be raised indicated by SQLSTATE = "02000" DISPLAY "FETCH PRIOR FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH PRIOR FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB24" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD if (SQLCODE NOT = 100) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *** FETCH LAST ROW again ** DISPLAY "FETCH LAST FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH LAST FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB25" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *Now retrieve the first row of the table DISPLAY "FETCH FIRST FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH FIRST FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB26" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1000; its value is ", varnm1 DISPLAY "COL_CH1 should be NICKOS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4000; its value is ", varnm2 DISPLAY "COL_CH2 should be ATHENS; its value is ", varch2 if (varnm1 NOT = 1000 OR varnm2 NOT = 4000) then MOVE 0 TO flag END-IF if (varch2 NOT = "ATHENS" OR varch1 NOT = "NICKOS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *now retrieve the rest of the rows but from first to last *fetch orientation. Fetch the second row DISPLAY "FETCH NEXT FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB27" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch next row DISPLAY "FETCH NEXT FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB28" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1002; its value is ", varnm1 DISPLAY "COL_CH1 should be MAKIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4002; its value is ", varnm2 DISPLAY "COL_CH2 should be HANIA; its value is ", varch2 if (varnm1 NOT = 1002 OR varnm2 NOT = 4002) then MOVE 0 TO flag END-IF if (varch2 NOT = "HANIA" OR varch1 NOT = "MAKIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch next row DISPLAY "FETCH NEXT FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB29" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1003; its value is ", varnm1 DISPLAY "COL_CH1 should be GEORGE; its value is ", varch1 DISPLAY "COL_NUM2 should be 4003; its value is ", varnm2 DISPLAY "COL_CH2 should be ARTA; its value is ", varch2 if (varnm1 NOT = 1003 OR varnm2 NOT = 4003) then MOVE 0 TO flag END-IF if (varch2 NOT = "ARTA" OR varch1 NOT = "GEORGE") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch final row DISPLAY "FETCH NEXT FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB30" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " *** attempt to read the next row after the last row *** and check that a completion condition of no data *** will be raised indicated by SQLSTATE = "02000" DISPLAY "FETCH NEXT FROM b INTO - " :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH NEXT FROM b INTO * :varnm1,:varch1,:varnm2,:varch2; CALL "SUB31" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD if (SQLCODE NOT = 100) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "CLOSE b;" * EXEC SQL CLOSE b; CALL "SUB32" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *declare a third cursor and check that all the rows *of table CTS1.CL_STANDARD have remained unaffected DISPLAY "DECLARE Z CURSOR FOR SELECT - " COL_NUM1,COL_CH1,COL_NUM2,COL_CH2 " DISPLAY "FROM CL_STANDARD ORDER BY COL_NUM1;" * EXEC SQL DECLARE Z CURSOR * FOR SELECT COL_NUM1,COL_CH1,COL_NUM2,COL_CH2 * FROM CL_STANDARD ORDER BY COL_NUM1 END-EXEC DISPLAY "OPEN Z;" * EXEC SQL OPEN Z; CALL "SUB33" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *start fetching rows in the cursor 5 in total *fetch first row from CL_STANDARD DISPLAY "FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2 * ; CALL "SUB34" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1000; its value is ", varnm1 DISPLAY "COL_CH1 should be NICKOS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4000; its value is ", varnm2 DISPLAY "COL_CH2 should be ATHENS; its value is ", varch2 if (varnm1 NOT = 1000 OR varnm2 NOT = 4000) then MOVE 0 TO flag END-IF if (varch2 NOT = "ATHENS" OR varch1 NOT = "NICKOS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch second row DISPLAY "FETCH Z INTO :varnm1,varch1,varnm2,varch2;" * EXEC SQL FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2 * ; CALL "SUB35" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1001; its value is ", varnm1 DISPLAY "COL_CH1 should be MARIA; its value is ", varch1 DISPLAY "COL_NUM2 should be 4001; its value is ", varnm2 DISPLAY "COL_CH2 should be RHODES; its value is ", varch2 if (varnm1 NOT = 1001 OR varnm2 NOT = 4001) then MOVE 0 TO flag END-IF if (varch2 NOT = "RHODES" OR varch1 NOT = "MARIA") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch third row DISPLAY "FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2 * ; CALL "SUB36" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1002; its value is ", varnm1 DISPLAY "COL_CH1 should be MAKIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4002; its value is ", varnm2 DISPLAY "COL_CH2 should be HANIA; its value is ", varch2 if (varnm1 NOT = 1002 OR varnm2 NOT = 4002) then MOVE 0 TO flag END-IF if (varch2 NOT = "HANIA" OR varch1 NOT = "MAKIS") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch fourth row DISPLAY "FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2 * ; CALL "SUB37" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1003; its value is ", varnm1 DISPLAY "COL_CH1 should be GEORGE; its value is ", varch1 DISPLAY "COL_NUM2 should be 4003; its value is ", varnm2 DISPLAY "COL_CH2 should be ARTA; its value is ", varch2 if (varnm1 NOT = 1003 OR varnm2 NOT = 4003) then MOVE 0 TO flag END-IF if (varch2 NOT = "ARTA" OR varch1 NOT = "GEORGE") then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO varnm1 MOVE 0 TO varnm2 MOVE "xxxxxxxxxx" TO varch1 MOVE "xxxxxxxxxx" TO varch2 *fetch fifth row DISPLAY "FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2;" * EXEC SQL FETCH Z INTO :varnm1,:varch1,:varnm2,:varch2 * ; CALL "SUB38" USING SQLCODE SQLSTATE varnm1 varch1 varnm2 varch2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL_NUM1 should be 1004; its value is ", varnm1 DISPLAY "COL_CH1 should be MORRIS; its value is ", varch1 DISPLAY "COL_NUM2 should be 4004; its value is ", varnm2 DISPLAY "COL_CH2 should be PARGA; its value is ", varch2 if (varnm1 NOT = 1004 OR varnm2 NOT = 4004) then MOVE 0 TO flag END-IF if (varch2 NOT = "PARGA" OR varch1 NOT = "MORRIS") then MOVE 0 TO flag END-IF DISPLAY " " DISPLAY "CLOSE Z;" * EXEC SQL CLOSE Z; CALL "SUB39" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB40" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " xts739.mco *** pass *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7039','pass','MCO'); CALL "SUB41" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " xts739.mco *** fail *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7039','fail','MCO'); CALL "SUB42" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "========================================" * EXEC SQL COMMIT WORK; CALL "SUB43" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST7039 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.71 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
