| products/sources/formale sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: xts758.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS758. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "XTS758.SCO") calling SQL * procedures in file "XTS758.MCO". *Copyright 1995 National Computing Centre Limited *and Computer Logic R&D S.A *on behalf of the CTS5 SQL2 Project. *All rights reserved. *The CTS5 SQL2 Project is sponsored by the European Community. * *The National Computing Centre Limited and Computer Logic R&D *have given permission to NIST to distribute this program *over the World Wide Web in order to promote SQL standards. *DISCLAIMER: *This program was reviewed by employees of NIST for *conformance to the SQL standards. *NIST assumes no responsibility for any party's use of *this program. **************************************************************** * * COMMENT SECTION * * SQL VALIDATION TEST SUITE V6.0 * * XTS758.SCO * WRITTEN BY: Nickos Backalidis * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * Scrolled cursor FETCH ABSOLUTE non-literal after last row * * REFERENCES * 13.1 -- <Declare cursor> * 13.3 -- <Fetch statement> * 13.3 GR.5b * F#24 -- Keyword relaxations * F#43 -- Scrolled cursors * * DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test * * Cleanups and fixes by V. Kogakis 15/12/95 * Print timestamp * Include Files * Define NOSUBCLASS/CHCKOK at test beginning * * QA STATUS : QA CHECK * * Revised by DWF 1996-02-20 * Removed status checks after cursor definition * Shortened variable names to 6 chars * Removed field width from printf * Fixed string lengths * Fixed wrong SQLCODE expected **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 num1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 chr1 PIC X(10). 01 rowptr PIC S9(9) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "CTS1 " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts758.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST7058 ******************* MOVE 1 TO flag DISPLAY " TEST7058" DISPLAY " Scrolled cursor FETCH ABSOLUTE non-literal, - " after last row" DISPLAY " References" DISPLAY " 13.1 -- DISPLAY " 13.3 -- DISPLAY " 13.3 GR.5b " DISPLAY " F#24 -- Keyword relaxations" DISPLAY " F#43 -- Scrolled cursors " DISPLAY " - - - - - - - - - - - - - - - - - - -" *Initialise error reporting variables COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *create a table under the current schema DISPLAY "CREATE TABLE TAB758" DISPLAY "(COL1 NUMERIC(5) PRIMARY KEY UNIQUE," DISPLAY " COL2 CHAR(10));" * EXEC SQL CREATE TABLE TAB758 * (COL1 NUMERIC(5) PRIMARY KEY UNIQUE, * COL2 CHAR(10)); CALL "SUB3" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB4" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *now insert five rows in the table DISPLAY "INSERT INTO TAB758 VALUES(101,'NICKOS');" * EXEC SQL INSERT INTO TAB758 VALUES(101,'NICKOS'); CALL "SUB5" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TAB758 VALUES(103,'LUNA');" * EXEC SQL INSERT INTO TAB758 VALUES(103,'LUNA'); CALL "SUB6" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TAB758 VALUES(105,'LOLA');" * EXEC SQL INSERT INTO TAB758 VALUES(105,'LOLA'); CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TAB758 VALUES(102,'LILIAN');" * EXEC SQL INSERT INTO TAB758 VALUES(102,'LILIAN'); CALL "SUB8" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TAB758 VALUES(104,'MARION');" * EXEC SQL INSERT INTO TAB758 VALUES(104,'MARION'); CALL "SUB9" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB10" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DECLARE SCRCURS SCROLL CURSOR FOR SELECT - " COL1,COL2" DISPLAY "FROM TAB758" DISPLAY "ORDER BY COL1;" * EXEC SQL DECLARE SCRCURS SCROLL CURSOR FOR SELECT COL1,COL2 * FROM TAB758 * ORDER BY COL1 END-EXEC DISPLAY "OPEN SCRCURS;" * EXEC SQL OPEN SCRCURS; CALL "SUB11" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *initialise host variables MOVE 0 TO num1 MOVE "xxxxxxxxxx" TO chr1 MOVE 5 TO rowptr *now fetch the last row of the cursor row DISPLAY "FETCH ABSOLUTE :rowptr FROM SCRCURS INTO - " :num1,:chr1;" * EXEC SQL FETCH ABSOLUTE :rowptr FROM SCRCURS INTO * :num1,:chr1; CALL "SUB12" USING SQLCODE SQLSTATE rowptr num1 chr1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL1 should be 105; its value is ", num1 DISPLAY "COL2 should be LOLA; its value is ", chr1 if (chr1 NOT = "LOLA" OR num1 NOT = 105) then MOVE 0 TO flag END-IF DISPLAY " " *initialise host variables MOVE 0 TO num1 MOVE "xxxxxxxxxx" TO chr1 DISPLAY "Non literal is incremented by 1" COMPUTE rowptr = rowptr + 1 DISPLAY "FETCH ABSOLUTE :rowptr FROM SCRCURS INTO - " :num1,:chr1;" * EXEC SQL FETCH ABSOLUTE :rowptr FROM SCRCURS INTO * :num1,:chr1; CALL "SUB13" USING SQLCODE SQLSTATE rowptr num1 chr1 MOVE SQLCODE TO SQL-COD *Check that an exception condition no data is raised *indicated in the value of SQLSTATE which should be 02000 DISPLAY "SQLCODE should be 100; its value is ", SQL-COD DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " *now decrement the host variable by 1 *this should return the fifth row of the table *initialise host variables MOVE 0 TO num1 MOVE "xxxxxxxxxx" TO chr1 DISPLAY "Non literal host variable is decremented by 1" COMPUTE rowptr = rowptr - 1 DISPLAY "FETCH ABSOLUTE :rowptr FROM SCRCURS INTO - " :num1,:chr1;" * EXEC SQL FETCH ABSOLUTE :rowptr FROM SCRCURS INTO * :num1,:chr1; CALL "SUB14" USING SQLCODE SQLSTATE rowptr num1 chr1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "COL1 should be 105; its value is ", num1 DISPLAY "COL2 should be LOLA; its value is ", chr1 if (chr1 NOT = "LOLA" OR num1 NOT = 105) then MOVE 0 TO flag END-IF DISPLAY " " DISPLAY "CLOSE SCRCURS;" * EXEC SQL CLOSE SCRCURS; CALL "SUB15" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB16" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *restore database in its original state DISPLAY "DROP TABLE TAB758 CASCADE;" * EXEC SQL DROP TABLE TAB758 CASCADE; CALL "SUB17" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *record results if ( flag = 1 ) then DISPLAY " xts758.mco *** pass *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7058','pass','MCO'); CALL "SUB19" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " xts758.mco *** fail *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7058','fail','MCO'); CALL "SUB20" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "========================================" * EXEC SQL COMMIT WORK; CALL "SUB21" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST7058 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.25 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
