Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: IBM930_OLD.java Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS775.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "YTS775.SCO") calling SQL
      * procedures in file "YTS775.MCO".

      *Copyright 1996 National Computing Centre Ltd,
      *and Computer Logic R&D S.A
      *on behalf of CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * YTS775.SCO
      * WRITTEN BY:  Susan Watters
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * SQL host program with duplicate local variable names
      *
      *
      * REFERENCES
      * COBOL standard, X3.23-1985
      *   SECTION X: INTER-PROGRAM COMMUNICATION MODULE, level 2
      *   This test requires compiler support for high subset of COBOL
      *        inter-program communication, level 2.
      *
      *   19.1      <embedded SQL host program>
      *   19.1 SR1  multiple SQL <embedded SQL declare section>s
      *                          permitted
      *   19.1 LR2b)
      *   F#36      Subprogram support
      *
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-03-14
      *   Added rollback after authid
      *   Removed EXEC SQL from inside printfs
      *   Changed printouts
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  x1 PIC  X(3).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  y1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  y2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts775.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7557 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7557 "
             DISPLAY " SQL host prog. with duplicate local variable
      -    " names"
             DISPLAY "References:"
             DISPLAY " 19.1 "
             DISPLAY " 19.1 SR1 multiple SQL
      -    " sections>"
             DISPLAY " permitted"
             DISPLAY " 19.1 LR2b)"
             DISPLAY " F#36 Subprogram support"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "* IN MAIN PROGRAM *"

      *Initialise global variables
             MOVE "yyy" TO x1
             MOVE 100000 TO y1
             MOVE 999999 TO y2

      *assign val to x1 in main program

             DISPLAY "Assign val to global variable x1"
             DISPLAY "SELECT EMPNUM INTO :x1 FROM CTS1.STAFF"
             DISPLAY "WHERE EMPNAME = 'Alice';"
      *    EXEC SQL SELECT EMPNUM INTO :x1 FROM CTS1.STAFF
      *    WHERE EMPNAME = 'Alice';
               CALL "SUB3" USING SQLCODE SQLSTATE x1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "x1 should be E1; its value is ", x1
             if (x1  NOT  =   "E1") then
               MOVE 0 TO flag
             END-IF

             MOVE -777 to SQLCODE
             MOVE "77777" TO SQLSTATE
             CALL "SUB-ONE" USING SQLCODE y1 SQLSTATE

             DISPLAY "* IN MAIN PROGRAM *"

             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE and SQLSTATE should be changed."
             DISPLAY "SQLCODE should be -111; its value is ",SQL-COD
             DISPLAY
               "SQLSTATE should be 11111; its value is ",SQLSTATE
             if (SQLCODE NOT = -111 OR SQLSTATE NOT = "11111") then
               MOVE 0 to flag
             END-IF

             DISPLAY
                  "Check global variable x1 not changed by subroutine"
             DISPLAY "x1 should be E1; its value is ", x1
             if (x1  NOT  =   "E1") then
               MOVE 0 TO flag
             END-IF

             MOVE -777 to SQLCODE
             MOVE "77777" TO SQLSTATE
             CALL "SUB-TWO" USING y2

             DISPLAY "* IN MAIN PROGRAM *"

             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE and SQLSTATE should NOT be changed."
             DISPLAY "SQLCODE should be -777; its value is ",SQL-COD
             DISPLAY "SQLSTATE should be 77777; its value is ",SQLSTATE
             if (SQLCODE NOT = -777 OR SQLSTATE NOT = "77777") then
               MOVE 0 to flag
             END-IF

           DISPLAY "Value returned from first subroutine should be 15"
           DISPLAY "Value is ", y1
           DISPLAY "Value returned from second subroutine should be 30"
           DISPLAY "Value is ", y2
             if (y1  NOT =  15  OR  y2  NOT =  30) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts775.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7557','pass','MCO');
               CALL "SUB5" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts775.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7557','fail','MCO');
               CALL "SUB6" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7557 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

      *   This test requires compiler support for high subset of COBOL
      *        inter-program communication, level 2.

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  SUB-ONE.
       ENVIRONMENT DIVISION.
       DATA DIVISION.
       WORKING-STORAGE SECTION.
      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  x1 PIC  X(3).
      * EXEC SQL END DECLARE SECTION END-EXEC
       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       LINKAGE SECTION.
      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLSTATE PIC  X(5).
       01  y3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  SQLCODE PIC S9(9) COMP.
      * EXEC SQL END DECLARE SECTION END-EXEC
       PROCEDURE DIVISION USING SQLCODE, y3, SQLSTATE.
       P0.
               DISPLAY "* In SUBPROGRAM 1*"

      *initialise variables y3, SQLCODE, SQLSTATE
               MOVE 99 TO y3
               MOVE -111 to SQLCODE
               MOVE "11111" to SQLSTATE
               DISPLAY "Initialize linkage variables:"
               DISPLAY " y3, SQLCODE, SQLSTATE"
               DISPLAY "SELECT HOURS INTO :y3"
               DISPLAY "FROM CTS1.STAFFa"
               DISPLAY "WHERE EMPNUM = 'E9'"
      *    EXEC SQL SELECT HOURS INTO :y3
      *      FROM CTS1.STAFFa
      *      WHERE EMPNUM = 'E9';
               CALL "SUB8" USING SQLCODE SQLSTATE y3
               MOVE SQLCODE TO SQL-COD
               DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
               DISPLAY
                 "SQLSTATE should be 00000; its value is ", SQLSTATE
               DISPLAY "y3 should be 15; its value is ", y3
               if SQLCODE = -111 or SQLSTATE = '11111'
                 then MOVE -444 TO y3
               END-IF

      *initialise subroutine var x1

               MOVE "zzz" TO x1

           DISPLAY "Declare cursor to assign val to subroutine
      -    " variable x1"
               DISPLAY "DECLARE func1 CURSOR FOR"
               DISPLAY "SELECT EMPNUM FROM CTS1.STAFF"
               DISPLAY "WHERE EMPNAME = 'Betty';"
      *    EXEC SQL DECLARE func1 CURSOR FOR
      *      SELECT EMPNUM FROM CTS1.STAFF
      *      WHERE EMPNAME = 'Betty' END-EXEC

               DISPLAY "OPEN func1;"
      *    EXEC SQL OPEN func1;
               CALL "SUB9" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               DISPLAY  " "

      *fetch cursor vals
               DISPLAY "FETCH func1 INTO :x1;"
      *    EXEC SQL FETCH func1 INTO :x1;
               CALL "SUB10" USING SQLCODE SQLSTATE x1
               MOVE SQLCODE TO SQL-COD
               DISPLAY "x1 should be E2; its value is ", x1
               if (x1  NOT  =   "E2") then
                 MOVE -555 TO y3
               END-IF

      *close cursor
               DISPLAY "CLOSE func1"
      *    EXEC SQL CLOSE func1;
               CALL "SUB11" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               DISPLAY  " "
               MOVE -111 to SQLCODE
               MOVE "11111" to SQLSTATE

               DISPLAY "EXIT SUBROUTINE 1"
       .
       SUB-ONE-EXIT.
           EXIT PROGRAM.
       END PROGRAM SUB-ONE.

      *   This test requires compiler support for high subset of COBOL
      *        inter-program communication, level 2.

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  SUB-TWO.
       ENVIRONMENT DIVISION.
       DATA DIVISION.
       WORKING-STORAGE SECTION.
      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
      * EXEC SQL END DECLARE SECTION END-EXEC
       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       LINKAGE SECTION.
      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  y3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      * EXEC SQL END DECLARE SECTION END-EXEC
       PROCEDURE DIVISION USING y3.
       P0.
                 DISPLAY "* IN SUBROUTINE 2 *"

      *initialise variables y3, SQLCODE, SQLSTATE
               MOVE -222 to SQLCODE
               MOVE "22222" to SQLSTATE
               MOVE 100 TO y3

           DISPLAY "declare cursor to assign value to linkage var
      -    " y3"

                 DISPLAY "DECLARE func2 CURSOR FOR"
                 DISPLAY "SELECT HOURS FROM CTS1.STAFFa"
                 DISPLAY "WHERE EMPNUM = 'E8';"
      *      EXEC SQL DECLARE func2 CURSOR FOR
      *        SELECT HOURS FROM CTS1.STAFFa
      *        WHERE EMPNUM = 'E8' END-EXEC

                 DISPLAY "OPEN func2;"
      *      EXEC SQL OPEN func2;
                 CALL "SUB12" USING SQLCODE SQLSTATE
                 MOVE SQLCODE TO SQL-COD
                 DISPLAY  " "

      *fetch value in cursor

                 DISPLAY "FETCH func2 INTO :y3;"
      *      EXEC SQL FETCH func2 INTO :y3;
                 CALL "SUB13" USING SQLCODE SQLSTATE y3
                 MOVE SQLCODE TO SQL-COD
               DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
               DISPLAY
                 "SQLSTATE should be 00000; its value is ", SQLSTATE
                 DISPLAY "y3 should be 30; its value is ", y3
               if SQLCODE = -222 or SQLSTATE = '22222'
                 then MOVE -555 TO y3
               END-IF

      *close cursor
                 DISPLAY "CLOSE func2;"
      *      EXEC SQL CLOSE func2;
                 CALL "SUB14" USING SQLCODE SQLSTATE
                 MOVE SQLCODE TO SQL-COD
                 DISPLAY  " "

                 DISPLAY "EXIT SUBROUTINE 2"
       .
       SUB-TWO-EXIT.
           EXIT PROGRAM.
       END PROGRAM SUB-TWO.
       END PROGRAM YTS775.

¤ Dauer der Verarbeitung: 0.37 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.