|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
yts797.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS797.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS797.SCO") calling SQL
* procedures in file "YTS797.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS797.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests <scalar subquery> in SET of searched
* update
*
*
* REFERENCES
* 6.11 LR2e restriction lifted
* 7.11 <scalar subquery>, <row subquery> and <table
* subquery>
* 13.10 F <update statement : searched>
* 13.9 F4 <update source>
* F#47 Scalar subquery values
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* 12/12/95 Derived table replaced, char variables moved to
* length 2
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-25
* Added rollback after authid
* Removed EXEC SQL from printf
* Renamed variable
* Fixed expected results
* Fixed syntax errors
**************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 tv1 PIC X(1).
01 tv2 PIC X(1).
01 tv3 PIC X(1).
01 tv4 PIC X(1).
01 tv5 PIC X(1).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts797.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7558 *******************
MOVE 1 TO flag
DISPLAY " TEST7558 "
DISPLAY " in SET of searched update"
DISPLAY "References:"
DISPLAY " 6.11 LR2e restriction lifted"
DISPLAY " 7.11 , "
DISPLAY " and "
DISPLAY " 13.10 F "
DISPLAY " 13.9 F4 "
DISPLAY " F#47 Scalar subquery values"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Initialise host variables
MOVE "v" TO tv1
MOVE "w" TO tv2
MOVE "x" TO tv3
MOVE "y" TO tv4
MOVE "z" TO tv5
DISPLAY "UPDATE TV AS X"
DISPLAY " SET B = "
DISPLAY " (SELECT D FROM TV AS Y, TW AS Z"
DISPLAY " WHERE Y.A = Z.E"
DISPLAY " AND X.A = Y.A);"
* EXEC SQL UPDATE TV AS X
* SET B =
* (SELECT D FROM TV AS Y, TW AS Z
* WHERE Y.A = Z.E
* AND X.A = Y.A);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*That should generate an cardinality violation exception
*which is SQLSTATE 21000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 21000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "21000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "21000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*If scalar subquery is empty, result is NULL (6.11 GR.2)
DISPLAY "UPDATE TV AS X"
DISPLAY " SET B = "
DISPLAY " (SELECT D FROM TV AS Y, TW AS Z"
DISPLAY " WHERE Y.A = Z.E AND Z.E <> 2"
DISPLAY " AND X.A = Y.A);"
* EXEC SQL UPDATE TV AS X
* SET B =
* (SELECT D FROM TV AS Y, TW AS Z
* WHERE Y.A = Z.E AND Z.E <> 2
* AND X.A = Y.A);
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* A B
* 1 g
* 2 NULL
* 3 NULL
* 4 h
* 5 i
*check rows in TV updated as expected
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT B INTO :tv1"
DISPLAY "FROM CTS1.TV"
DISPLAY "WHERE A = 1;"
* EXEC SQL SELECT B INTO :tv1
* FROM CTS1.TV
* WHERE A = 1;
CALL "SUB5" USING SQLCODE SQLSTATE tv1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "tv1 should be g; its value is ", tv1
if (tv1 NOT = "g") then
MOVE 0 TO flag
END-IF
MOVE 99 TO indic1
DISPLAY "SELECT B INTO :tv2:indic1"
DISPLAY "FROM CTS1.TV "
DISPLAY "WHERE A = 2;"
* EXEC SQL SELECT B INTO :tv2:indic1
* FROM CTS1.TV
* WHERE A = 2;
CALL "SUB6" USING SQLCODE SQLSTATE tv2 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
MOVE 99 TO indic1
DISPLAY "SELECT B INTO :tv3:indic1"
DISPLAY "FROM CTS1.TV "
DISPLAY "WHERE A = 3;"
* EXEC SQL SELECT B INTO :tv3:indic1
* FROM CTS1.TV
* WHERE A = 3;
CALL "SUB7" USING SQLCODE SQLSTATE tv3 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT B INTO :tv4"
DISPLAY "FROM CTS1.TV"
DISPLAY "WHERE A = 4;"
* EXEC SQL SELECT B INTO :tv4
* FROM CTS1.TV
* WHERE A = 4;
CALL "SUB8" USING SQLCODE SQLSTATE tv4
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "tv4 should be h; its value is ", tv4
if (tv4 NOT = "h") then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT B INTO :tv5"
DISPLAY "FROM CTS1.TV"
DISPLAY "WHERE A = 5;"
* EXEC SQL SELECT B INTO :tv5
* FROM CTS1.TV
* WHERE A = 5;
CALL "SUB9" USING SQLCODE SQLSTATE tv5
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "tv5 should be i; its value is ", tv5
if (tv5 NOT = "i") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts797.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7558','pass','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts797.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7558','fail','MCO');
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7558 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.23 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
