Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: yts800.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS800.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "YTS800.SCO") calling SQL
      * procedures in file "YTS800.MCO".

      *Copyright 1996 National Computing Centre Ltd,
      *and Computer Logic R&D S.A
      *on behalf of CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * YTS800.SCO
      * WRITTEN BY:  Susan Watters
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * <null pred>-<interval value exp> as <row value constructor>
      *
      *
      * REFERENCES
      *   8.6 GR2 <null predicate> - IS NULL
      *   8.6 GR3 <null predicate> - IS NOT NULL
      *   6.15    <interval value expression>
      *   F#48    Expanded null predicate
      *   F#5     DATETIME data types
      *
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-03-26
      *   Added rollback after authid
      *   Removed EXEC SQL from printf
      *   Removed confusing printout
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  col1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts800.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7532 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7532 "
             DISPLAY " as
      -    " cons>"
             DISPLAY "References:"
             DISPLAY " 8.6 GR2 IS NULL"
             DISPLAY " 8.6 GR3 IS NOT NULL"
             DISPLAY " 6.15 "
             DISPLAY " F#48 Expanded null predicate"
             DISPLAY " F#5 DATETIME data types"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             MOVE 1 TO flag1
             MOVE 1 TO flag2
             MOVE 1 TO flag3

      *declare cursor to find null cols

             DISPLAY "DECLARE CRA CURSOR FOR"
             DISPLAY "SELECT TTA FROM TT2 WHERE"
             DISPLAY "TTB+CAST(TTC AS INTERVAL MONTH) IS NULL;"

      *  EXEC SQL DECLARE CRA CURSOR FOR
      *    SELECT TTA FROM TT2
      *    WHERE TTB+CAST(TTC AS INTERVAL MONTH) IS NULL END-EXEC

             DISPLAY "OPEN CRA;"
      *  EXEC SQL OPEN CRA;
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "We should get 2, 3, and 4 (in any order)."

      *Fetch all values of CRA
             MOVE 0 TO i
             PERFORM P50 UNTIL i > 2

             if (flag1  NOT =  0  OR  flag2  NOT =  0  OR  flag3  NOT =
             0) then
               DISPLAY "Incorrect rows fetched"
               MOVE 0 TO flag
             END-IF

      *find all rows of TT2 where there is no null

             MOVE 99 TO co
             DISPLAY "SELECT COUNT (*) INTO :co FROM TT2"
             DISPLAY "WHERE NOT TTB+CAST(TTC AS INTERVAL MONTH) IS
      -    " NULL;"
      *  EXEC SQL SELECT COUNT (*) INTO :co FROM TT2
      *    WHERE NOT TTB+CAST(TTC AS INTERVAL MONTH) IS NULL
      * ;
             CALL "SUB4" USING SQLCODE SQLSTATE co
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "co should be 2; its value is ", co
             if (co  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE CRA;"
      *  EXEC SQL CLOSE CRA;
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts800.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7532','pass','MCO');
               CALL "SUB7" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts800.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7532','fail','MCO');
               CALL "SUB8" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7532 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

        P50.
               MOVE 99 TO col1
               DISPLAY "FETCH CRA INTO :col1;"
      *    EXEC SQL FETCH CRA INTO :col1;
               CALL "SUB10" USING SQLCODE SQLSTATE col1
               MOVE SQLCODE TO SQL-COD
               if (col1  =  2  AND  flag1  =  1) then
                 MOVE 0 TO flag1
               END-IF
               if (col1  =  3  AND  flag2  =  1) then
                 MOVE 0 TO flag2
               END-IF
               if (col1  =  4  AND  flag3  =  1) then
                 MOVE 0 TO flag3
               END-IF
           PERFORM CHCKOK
               DISPLAY "col1 is ", col1
             ADD 1 TO i
           .

¤ Dauer der Verarbeitung: 0.21 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.