| products/sources/formale sprachen/Cobol/Test-Suite/SQL P/dml100-186/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: dml114.cob Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML114. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * EMBEDDED COBOL (file "DML114.PCO") **************************************************************** * * COMMENT SECTION * * DATE 1994/3/30 EMBEDDED COBOL LANGUAGE * NIST SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML114.PCO * WRITTEN BY: David W. Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE * * This routine tests FIPS features 13, 14, 15, and 16. * This is the non-dynamic version of DML115.PC. * * REFERENCES * FIPS PUB 127-2 14.1 Transitional SQL * ANSI SQL-1992 * **************************************************************** EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ch1 PIC X(3). 01 ch2 PIC X(20). 01 ch3 PIC X(15). 01 ch4 PIC X(3). EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ctr1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ctr2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ctr3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC MOVE SQLCODE TO SQL-COD EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid " expected. User ", uidx " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, dml114.pco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0635 ******************* MOVE 1 TO flag DISPLAY " TEST0635 " DISPLAY " Feature 13, grouped operations (static)" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature - " 13" DISPLAY " 7.3 LR.2.a" DISPLAY " 7.4 LR.2.a" DISPLAY " 7.9 LR.2.c" DISPLAY " 7.11 LR.2.a" DISPLAY " 13.5 LR.2.b" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE VIEW WORKWEEK AS" DISPLAY " SELECT EMPNUM, HOURS FROM HU.WORKS" DISPLAY " GROUP BY HOURS, EMPNUM;" EXEC SQL CREATE VIEW WORKWEEK AS SELECT EMPNUM, HOURS FROM HU.WORKS GROUP BY HOURS, EMPNUM END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Removal of leveling rule 2a of Subclause 7.3 *Removal of leveling rule 2c of Subclause 7.9 *Removal of leveling rule 2b of Subclause 13.5 MOVE "xyz" TO ch1 COMPUTE int1 = -1 DISPLAY "SELECT EMPNUM, SUM (HOURS) INTO :ch1, :int1" DISPLAY " FROM WORKWEEK" DISPLAY " WHERE HOURS > 20" DISPLAY " GROUP BY EMPNUM" DISPLAY " HAVING EMPNUM = 'E1';" EXEC SQL SELECT EMPNUM, SUM (HOURS) INTO :ch1, :int1 FROM WORKWEEK WHERE HOURS > 20 GROUP BY EMPNUM HAVING EMPNUM = 'E1' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E1 '; its value is '", ch1 "'" DISPLAY "int1 should be 120; its value is ", int1 if (ch1 NOT = "E1 " OR int1 NOT = 120) then MOVE 0 TO flag END-IF *This is more meaningful -- how many people work too hard? COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM WORKWEEK WHERE HOURS > 40;" EXEC SQL SELECT COUNT(*) INTO :int1 FROM WORKWEEK WHERE HOURS > 40 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 3; its value is ", int1 if (int1 NOT = 3) then MOVE 0 TO flag END-IF *Removal of leveling rule 2a of Subclause 7.4 MOVE "aaaaaaaaaaaaaaaaaaaa" TO ch2 DISPLAY "SELECT EMPNAME INTO :ch2" DISPLAY " FROM HU.STAFF, WORKWEEK" DISPLAY " WHERE HU.STAFF.EMPNUM = WORKWEEK.EMPNUM" DISPLAY " AND HOURS = 12;" EXEC SQL SELECT EMPNAME INTO :ch2 FROM HU.STAFF, WORKWEEK WHERE HU.STAFF.EMPNUM = WORKWEEK.EMPNUM AND HOURS = 12 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch2 should be Alice; its value is ", ch2 if (ch2 NOT = "Alice") then MOVE 0 TO flag END-IF *Removal of leveling rule 2c of Subclause 7.9 COMPUTE int1 = -1 COMPUTE int2 = -1 MOVE "xxx" TO ch1 MOVE "xxx" TO ch4 DISPLAY "SELECT COUNT(*), MAX(EMPNUM), MIN(EMPNUM), - " AVG(HOURS)" DISPLAY " INTO :int1, :ch1, :ch4, :int2" DISPLAY " FROM WORKWEEK;" EXEC SQL SELECT COUNT(*), MAX(EMPNUM), MIN(EMPNUM), AVG(HOURS) INTO :int1, :ch1, :ch4, :int2 FROM WORKWEEK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 10; its value is ", int1 DISPLAY "ch1 should be 'E4 '; its value is '", ch1 "'" DISPLAY "ch4 should be 'E1 '; its value is '", ch4 "'" DISPLAY "int2 should be 43; its value is ", int2 if (int1 NOT = 10 OR ch1 NOT = "E4 ") then MOVE 0 TO flag END-IF if (ch4 NOT = "E1 " OR int2 NOT = 43) then MOVE 0 TO flag END-IF *Removal of leveling rule 2a of Subclause 7.11 MOVE "aaaaaaaaaaaaaaaaaaaa" TO ch2 DISPLAY "SELECT EMPNAME INTO :ch2" DISPLAY " FROM HU.STAFF WHERE EMPNUM =" DISPLAY " (SELECT EMPNUM FROM WORKWEEK" DISPLAY " WHERE HOURS = 12);" EXEC SQL SELECT EMPNAME INTO :ch2 FROM HU.STAFF WHERE EMPNUM = (SELECT EMPNUM FROM WORKWEEK WHERE HOURS = 12) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch2 should be Alice; its value is ", ch2 if (ch2 NOT = "Alice") then MOVE 0 TO flag END-IF MOVE "aaaaaaaaaaaaaaaaaaaa" TO ch2 DISPLAY "SELECT EMPNAME INTO :ch2" DISPLAY " FROM HU.STAFF WHERE EMPNUM =" DISPLAY " (SELECT EMPNUM FROM HU.WORKS" DISPLAY " GROUP BY EMPNUM, HOURS" DISPLAY " HAVING HOURS = 12);" EXEC SQL SELECT EMPNAME INTO :ch2 FROM HU.STAFF WHERE EMPNUM = (SELECT EMPNUM FROM HU.WORKS GROUP BY EMPNUM, HOURS HAVING HOURS = 12) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch2 should be Alice; its value is ", ch2 if (ch2 NOT = "Alice") then MOVE 0 TO flag END-IF *Cursor operation MOVE 3 TO ctr1 MOVE 1 TO ctr2 MOVE 4 TO ctr3 DISPLAY "The following cursor scan should return 3 three - " times" DISPLAY "and 1 once, then we should get NO DATA (02000)." DISPLAY "DECLARE C11411 CURSOR FOR" DISPLAY " SELECT COUNT(*) FROM WORKWEEK" DISPLAY " GROUP BY HOURS;" EXEC SQL DECLARE C11411 CURSOR FOR SELECT COUNT(*) FROM WORKWEEK GROUP BY HOURS END-EXEC DISPLAY " " DISPLAY "OPEN C11411;" EXEC SQL OPEN C11411 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " . P100. COMPUTE int1 = -1 DISPLAY "FETCH C11411 INTO :int1;" EXEC SQL FETCH C11411 INTO :int1 END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE is ", SQL-COD DISPLAY "SQLSTATE is ", SQLSTATE if (SQLCODE NOT = 0) then GO TO P101 END-IF DISPLAY "int1 is ", int1 COMPUTE ctr3 = ctr3 - 1 if (int1 = 1) then COMPUTE ctr2 = ctr2 - 1 END-IF if (int1 = 3) then COMPUTE ctr1 = ctr1 - 1 END-IF GO TO P100 . P101. if (ctr1 NOT = 0 OR ctr2 NOT = 0 OR ctr3 NOT = 0) then MOVE 0 TO flag END-IF PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " *Let the commit close the cursor DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP VIEW WORKWEEK CASCADE;" EXEC SQL DROP VIEW WORKWEEK CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0635','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml114.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0635','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0635 ******************** ******************** BEGIN TEST0637 ******************* MOVE 1 TO flag DISPLAY " TEST0637 " DISPLAY " Feature 14, Qualified * in select list (static)" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature - " 14" DISPLAY " 7.9 LR.2.b" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE VIEW QUALSTAR AS" DISPLAY " SELECT HU.STAFF.*, HOURS FROM HU.STAFF, - " HU.WORKS" DISPLAY " WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM;" EXEC SQL CREATE VIEW QUALSTAR AS SELECT HU.STAFF.*, HOURS FROM HU.STAFF, HU.WORKS WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE VIEW CORRQUALSTAR AS" DISPLAY " SELECT BLAH.*, HOURS FROM HU.STAFF BLAH, - " HU.WORKS" DISPLAY " WHERE BLAH.EMPNUM = HU.WORKS.EMPNUM;" EXEC SQL CREATE VIEW CORRQUALSTAR AS SELECT BLAH.*, HOURS FROM HU.STAFF BLAH, HU.WORKS WHERE BLAH.EMPNUM = HU.WORKS.EMPNUM END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE VIEW SUBQ2 AS" DISPLAY " SELECT DISTINCT * FROM QUALSTAR;" EXEC SQL CREATE VIEW SUBQ2 AS SELECT DISTINCT * FROM QUALSTAR END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE VIEW CORRSUBQ2 AS" DISPLAY " SELECT DISTINCT * FROM CORRQUALSTAR;" EXEC SQL CREATE VIEW CORRSUBQ2 AS SELECT DISTINCT * FROM CORRQUALSTAR END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM QUALSTAR;" EXEC SQL SELECT COUNT(*) INTO :int1 FROM QUALSTAR END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 12; its value is ", int1 if (int1 NOT = 12) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM SUBQ2;" EXEC SQL SELECT COUNT(*) INTO :int1 FROM SUBQ2 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 10; its value is ", int1 if (int1 NOT = 10) then MOVE 0 TO flag END-IF *Subtest one: through the view MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 COMPUTE int2 = -1 DISPLAY "SELECT EMPNUM, GRADE, CITY, HOURS" DISPLAY " INTO :ch1, :int1, :ch3, :int2" DISPLAY " FROM QUALSTAR WHERE EMPNAME = 'Carmen';" EXEC SQL SELECT EMPNUM, GRADE, CITY, HOURS INTO :ch1, :int1, :ch3, :int2 FROM QUALSTAR WHERE EMPNAME = 'Carmen' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF DISPLAY "int2 should be 20; its value is ", int2 if (int2 NOT = 20) then MOVE 0 TO flag END-IF *Subtest two: with a cursor *Ordering of columns: 7.4 SR.1.b DISPLAY "DECLARE JOANS CURSOR FOR" DISPLAY " SELECT HU.STAFF.*, HOURS FROM HU.STAFF, - " HU.WORKS" DISPLAY " WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM" DISPLAY " AND EMPNAME > 'Betty'" DISPLAY " ORDER BY EMPNAME;" EXEC SQL DECLARE JOANS CURSOR FOR SELECT HU.STAFF.*, HOURS FROM HU.STAFF, HU.WORKS WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM AND EMPNAME > 'Betty' ORDER BY EMPNAME END-EXEC DISPLAY "OPEN JOANS;" EXEC SQL OPEN JOANS END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxxxxxxx" TO ch2 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 COMPUTE int2 = -1 DISPLAY "FETCH JOANS INTO :ch1, :ch2, :int1, :ch3, :int2;" EXEC SQL FETCH JOANS INTO :ch1, :ch2, :int1, :ch3, :int2 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "ch2 should be 'Carmen '; its value is - " '", ch2 "'" if (ch2 NOT = "Carmen ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF DISPLAY "int2 should be 20; its value is ", int2 if (int2 NOT = 20) then MOVE 0 TO flag END-IF DISPLAY "CLOSE JOANS;" EXEC SQL CLOSE JOANS END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Subtest three: single row select MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxxxxxxx" TO ch2 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 COMPUTE int2 = -1 DISPLAY "SELECT HU.STAFF.*, HOURS" DISPLAY " INTO :ch1, :ch2, :int1, :ch3, :int2" DISPLAY " FROM HU.STAFF, HU.WORKS" DISPLAY " WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM" DISPLAY " AND EMPNAME = 'Carmen';" EXEC SQL SELECT HU.STAFF.*, HOURS INTO :ch1, :ch2, :int1, :ch3, :int2 FROM HU.STAFF, HU.WORKS WHERE HU.STAFF.EMPNUM = HU.WORKS.EMPNUM AND EMPNAME = 'Carmen' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "ch2 should be 'Carmen '; its value is - " '", ch2 "'" if (ch2 NOT = "Carmen ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF DISPLAY "int2 should be 20; its value is ", int2 if (int2 NOT = 20) then MOVE 0 TO flag END-IF *Contiue with view testing COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM CORRQUALSTAR;" EXEC SQL SELECT COUNT(*) INTO :int1 FROM CORRQUALSTAR END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 12; its value is ", int1 if (int1 NOT = 12) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1 FROM CORRSUBQ2;" EXEC SQL SELECT COUNT(*) INTO :int1 FROM CORRSUBQ2 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 10; its value is ", int1 if (int1 NOT = 10) then MOVE 0 TO flag END-IF MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 COMPUTE int2 = -1 DISPLAY "SELECT EMPNUM, GRADE, CITY, HOURS" DISPLAY " INTO :ch1, :int1, :ch3, :int2" DISPLAY " FROM CORRQUALSTAR WHERE EMPNAME = 'Carmen';" EXEC SQL SELECT EMPNUM, GRADE, CITY, HOURS INTO :ch1, :int1, :ch3, :int2 FROM CORRQUALSTAR WHERE EMPNAME = 'Carmen' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF DISPLAY "int2 should be 20; its value is ", int2 if (int2 NOT = 20) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP VIEW QUALSTAR CASCADE;" EXEC SQL DROP VIEW QUALSTAR CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP VIEW CORRQUALSTAR CASCADE;" EXEC SQL DROP VIEW CORRQUALSTAR CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0637','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml114.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0637','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0637 ******************** ******************** BEGIN TEST0639 ******************* MOVE 1 TO flag DISPLAY " TEST0639 " DISPLAY " Feature 15, Lowercase Identifiers (static)" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature - " 15" DISPLAY " 5.2 LR.2.b" DISPLAY " 5.2 SR.15 -- Lowercase keywords are Entry SQL" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "EXEC SQL CREATE VIEW STAFF (EMPNUM, EMPNAME, - " GRADE, CITY) AS" DISPLAY " SELECT EMPNUM, EMPNAME, GRADE, CITY FROM - " HU.STAFF;" Exec SQL create view Staff (Empnum, empname, Grade, City) as select Empnum, EMPNAME, Grade, cItY from Hu.Staff END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "exec sql commit work;" exec sql commit work END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE int1 = -1 DISPLAY "exec sql SELECT Count(*) INTO :int1 FROM STAFF;" exec sql SELECT Count(*) INTO :int1 FROM STAFF END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 5; its value is ", int1 if (int1 NOT = 5) then MOVE 0 TO flag END-IF MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 DISPLAY "SELECT EMPNUM as WhatsHisNumber, GRADE, CITY" DISPLAY " INTO :ch1, :int1, :ch3" DISPLAY " FROM Flater.staff FLaterStaff_Flater" DISPLAY " WHERE EMPNAME = 'Carmen'" DISPLAY " AND FLATERstaff_fLATER.whatshisnumber = 'E3';" EXEC SQL SELECT EMPNUM as WhatsHisNumber, GRADE, CITY INTO :ch1, :int1, :ch3 FROM Flater.staff FLaterStaff_Flater WHERE EMPNAME = 'Carmen' AND FLATERstaff_fLATER.whatshisnumber = 'E3' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF DISPLAY "DECLARE c63931 CURSOR FOR" DISPLAY " SELECT EMPNUM as WhatsHisNumber, GRADE, CITY" DISPLAY " FROM Flater.staff FLaterStaff_Flater" DISPLAY " WHERE EMPNAME > 'Betty'" DISPLAY " ORDER BY whatshisnumber;" EXEC SQL DECLARE c63931 CURSOR FOR SELECT EMPNUM as WhatsHisNumber, GRADE, CITY FROM Flater.staff FLaterStaff_Flater WHERE EMPNAME > 'Betty' ORDER BY WHATSHISNUMBER END-EXEC DISPLAY "OPEN C63931;" EXEC SQL OPEN C63931 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE "xxx" TO ch1 MOVE "xxxxxxxxxxxxxxx" TO ch3 COMPUTE int1 = -1 DISPLAY "FETCH c63931 INTO :ch1, :int1, :ch3;" EXEC SQL FETCH c63931 INTO :ch1, :int1, :ch3 END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "ch1 should be 'E3 '; its value is '", ch1 "'" if (ch1 NOT = "E3 ") then MOVE 0 TO flag END-IF DISPLAY "int1 should be 13; its value is ", int1 if (int1 NOT = 13) then MOVE 0 TO flag END-IF DISPLAY "ch3 should be 'Vienna '; its value is '", ch3 "'" if (ch3 NOT = "Vienna ") then MOVE 0 TO flag END-IF *Translation note for module: change a procedure name to lower *case if host language permits it, both in module and in host *language. DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP VIEW STAFF CASCADE;" EXEC SQL DROP VIEW STAFF CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0639','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml114.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0639','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0639 ******************** ******************** BEGIN TEST0641 ******************* MOVE 1 TO flag DISPLAY " TEST0641 " DISPLAY " Feature 16, PRIMARY KEY enhancement (static)" DISPLAY "References:" DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature - " 16" DISPLAY " 11.7 LR.2.a" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE FEAT16 (" DISPLAY " EMPNUM INT PRIMARY KEY," DISPLAY " PNUM INT UNIQUE);" EXEC SQL CREATE TABLE FEAT16 ( EMPNUM INT PRIMARY KEY, PNUM INT UNIQUE) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE TABLE BARNO (" DISPLAY " P1 INT, P2 CHAR, X1 INT, X2 CHAR," DISPLAY " UNIQUE (X2, X1)," DISPLAY " PRIMARY KEY (P1, P2));" EXEC SQL CREATE TABLE BARNO ( P1 INT, P2 CHAR, X1 INT, X2 CHAR, UNIQUE (X2, X1), PRIMARY KEY (P1, P2)) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (1, 10);" EXEC SQL INSERT INTO FEAT16 VALUES (1, 10) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (2, 20);" EXEC SQL INSERT INTO FEAT16 VALUES (2, 20) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (1, 30);" EXEC SQL INSERT INTO FEAT16 VALUES (1, 30) END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (3, 20);" EXEC SQL INSERT INTO FEAT16 VALUES (3, 20) END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " *Multiple nulls are OK -- See 8.9 GR.2 DISPLAY "INSERT INTO FEAT16 VALUES (3, NULL);" EXEC SQL INSERT INTO FEAT16 VALUES (3, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (4, NULL);" EXEC SQL INSERT INTO FEAT16 VALUES (4, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO FEAT16 VALUES (5, NULL);" EXEC SQL INSERT INTO FEAT16 VALUES (5, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Start on second table DISPLAY "INSERT INTO BARNO VALUES (1, 'A', 10, 'a');" EXEC SQL INSERT INTO BARNO VALUES (1, 'A', 10, 'a') END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (2, 'A', 20, 'a');" EXEC SQL INSERT INTO BARNO VALUES (2, 'A', 20, 'a') END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (1, 'A', 30, 'a');" EXEC SQL INSERT INTO BARNO VALUES (1, 'A', 30, 'a') END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (3, 'A', 20, 'a');" EXEC SQL INSERT INTO BARNO VALUES (3, 'A', 20, 'a') END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (3, NULL, 30, 'a');" EXEC SQL INSERT INTO BARNO VALUES (3, NULL, 30, 'a') END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (3, NULL, 30, 'b');" EXEC SQL INSERT INTO BARNO VALUES (3, NULL, 30, 'b') END-EXEC MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (NORMSQ NOT = "23000") then MOVE 0 TO flag END-IF if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (3, 'A', 30, NULL));" EXEC SQL INSERT INTO BARNO VALUES (3, 'A', 30, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (3, 'B', 30, NULL));" EXEC SQL INSERT INTO BARNO VALUES (3, 'B', 30, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BARNO VALUES (4, 'B', NULL, NULL));" EXEC SQL INSERT INTO BARNO VALUES (4, 'B', NULL, NULL) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE FEAT16 CASCADE;" EXEC SQL DROP TABLE FEAT16 CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE BARNO CASCADE;" EXEC SQL DROP TABLE BARNO CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0641','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " dml114.pco *** fail *** " EXEC SQL INSERT INTO HU.TESTREPORT VALUES('0641','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST0641 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.29 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
