Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: ist007.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  IST007.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "IST007.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1993/06/22 EMBEDDED COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * IST007.PCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      *   THIS ROUTINE TESTS THE INFORMATION SCHEMA FOR
      *   TRANSITIONAL SQL.
      *
      * REFERENCES
      *   ANSI SQL-1992
      *     21 Information Schema and Definition Schema
      *   X3H2-93-389  Corrections to FIPS Transitional SQL
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  ctr1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ctr2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  catlog PIC  X(128).
       01  junk1 PIC  X(39).
       01  junk2 PIC  X(39).
       01  junk3 PIC  X(39).
       01  junk4 PIC  X(39).
       01  junk5 PIC  X(39).
       01  junk6 PIC  X(39).
       01  junk7 PIC  X(39).
       01  junk8 PIC  X(39).
       01  junk9 PIC  X(39).
       01  junk10 PIC  X(39).
       01  junk11 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic5 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic6 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic7 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic8 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic9 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indica PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indicb PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, ist007.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0609 *******************
             MOVE 1 TO flag

      *Transitional SQL.  USAGE_PRIVILEGES is required for
      *TSQL, but domains, character sets, collations, and
      *translations are not.  This test also checks for existence
      *of columns pertaining to domains, character sets,
      *collations, and translations in the other TSQL data
      *structures.

      *FIPS PUB 127-2 section 14.2 # 35 says:
      *  In Entry SQL or Intermediate SQL, some of these tables
      *may have empty or trivial contents, but an implementation
      *supporting this feature is required to process statements
      *that properly reference any of these tables.

             DISPLAY " TEST0609 "
             DISPLAY "Orphaned IS data structures, Transitional SQL"
             DISPLAY " Reference FIPS PUB 127-2;"
             DISPLAY "Also ANSI X3H2-93-148 Corrections to ANSI
      -    " SQL-1992,"
             DISPLAY " page 16 -- changes to COLUMNS view,"
             DISPLAY "and X3H2-93-389 Corrections to FIPS Transitional
      -    " SQL"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE
             COMPUTE ctr1 = -1

      *Catalog names are Full SQL.  Make sure that there is
      *exactly one catalog name in all the TSQL INFO_
      *SCHEM data structures.

             DISPLAY "SELECT COUNT (DISTINCT TABLE_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.TABLES;"

             EXEC SQL SELECT COUNT (DISTINCT TABLE_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.TABLES END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT TABLE_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.VIEWS;"

             EXEC SQL SELECT COUNT (DISTINCT TABLE_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.VIEWS END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT TABLE_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.COLUMNS;"

             EXEC SQL SELECT COUNT (DISTINCT TABLE_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.COLUMNS END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT CAT_NAME)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.SCHEMATA;"

             EXEC SQL SELECT COUNT (DISTINCT CAT_NAME)
               INTO :ctr1
               FROM INFO_SCHEM.SCHEMATA END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT TABLE_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.TABLE_PRIVILEGES;"

             EXEC SQL SELECT COUNT (DISTINCT TABLE_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.TABLE_PRIVILEGES END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT TABLE_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.COLUMN_PRIVILEGES;"

             EXEC SQL SELECT COUNT (DISTINCT TABLE_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.COLUMN_PRIVILEGES END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 1; its value is ", ctr1
             if (ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (DISTINCT OBJECT_CAT)"
             DISPLAY "INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES;"

             EXEC SQL SELECT COUNT (DISTINCT OBJECT_CAT)
               INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES END-EXEC
             MOVE SQLCODE TO SQL-COD

      *Relaxed pass condition in case it's empty.

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0 or 1; its value is ", ctr1
             if (ctr1  NOT =  0  AND  ctr1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT TABLE_CAT INTO :catlog"
             DISPLAY "FROM INFO_SCHEM.TABLES"
             DISPLAY "WHERE TABLE_NAME = 'WCOV';"

      *Note to translator:  catlog is too long to initialize the entir
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO catlog
             EXEC SQL SELECT TABLE_CAT INTO :catlog
               FROM INFO_SCHEM.TABLES
               WHERE TABLE_NAME = 'WCOV' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "catlog is '", catlog "'"

             DISPLAY "IMPORTANT: If SQLSTATE indicated truncation,"
             DISPLAY "increase the size of the catlog string and re-"
             DISPLAY "run the test; otherwise you will fail needlessly."

      *This is overkill but it checks for NULLs in TABLES.

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.TABLES"
             DISPLAY "WHERE TABLE_CAT <> :catlog"
             DISPLAY "OR TABLE_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.TABLES
               WHERE TABLE_CAT <> :catlog
               OR TABLE_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.VIEWS"
             DISPLAY "WHERE TABLE_CAT <> :catlog"
             DISPLAY "OR TABLE_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.VIEWS
               WHERE TABLE_CAT <> :catlog
               OR TABLE_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.COLUMNS"
             DISPLAY "WHERE TABLE_CAT <> :catlog"
             DISPLAY "OR TABLE_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.COLUMNS
               WHERE TABLE_CAT <> :catlog
               OR TABLE_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.SCHEMATA"
             DISPLAY "WHERE CAT_NAME <> :catlog"
             DISPLAY "OR CAT_NAME IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.SCHEMATA
               WHERE CAT_NAME <> :catlog
               OR CAT_NAME IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.TABLE_PRIVILEGES"
             DISPLAY "WHERE TABLE_CAT <> :catlog"
             DISPLAY "OR TABLE_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.TABLE_PRIVILEGES
               WHERE TABLE_CAT <> :catlog
               OR TABLE_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.COLUMN_PRIVILEGES"
             DISPLAY "WHERE TABLE_CAT <> :catlog"
             DISPLAY "OR TABLE_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.COLUMN_PRIVILEGES
               WHERE TABLE_CAT <> :catlog
               OR TABLE_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE OBJECT_CAT <> :catlog"
             DISPLAY "OR OBJECT_CAT IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE OBJECT_CAT <> :catlog
               OR OBJECT_CAT IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Remaining orphaned columns in COLUMNS.

             DISPLAY "SELECT CHAR_SET_CAT,"
             DISPLAY "CHAR_SET_SCHEM,"
             DISPLAY "CHAR_SET_NAME,"
             DISPLAY "COLLATION_CAT,"
             DISPLAY "COLLATION_SCHEM,"
             DISPLAY "COLLATION_NAME,"
             DISPLAY "DOMAIN_CAT,"
             DISPLAY "DOMAIN_SCHEM,"
             DISPLAY "DOMAIN_NAME,"
             DISPLAY "INTERVAL_TYPE,"
             DISPLAY "INTERVAL_PREC"
             DISPLAY "INTO :junk1:indic1,"
             DISPLAY ":junk2:indic2,"
             DISPLAY ":junk3:indic3,"
             DISPLAY ":junk4:indic4,"
             DISPLAY ":junk5:indic5,"
             DISPLAY ":junk6:indic6,"
             DISPLAY ":junk7:indic7,"
             DISPLAY ":junk8:indic8,"
             DISPLAY ":junk9:indic9,"
             DISPLAY ":junk10:indica,"
             DISPLAY ":junk11:indicb"
             DISPLAY "FROM INFO_SCHEM.COLUMNS"
             DISPLAY "WHERE TABLE_SCHEM = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'USIG'"
             DISPLAY "AND COLUMN_NAME = 'C1';"

             EXEC SQL SELECT CHAR_SET_CAT,
               CHAR_SET_SCHEM,
               CHAR_SET_NAME,
               COLLATION_CAT,
               COLLATION_SCHEM,
               COLLATION_NAME,
               DOMAIN_CAT,
               DOMAIN_SCHEM,
               DOMAIN_NAME,
               INTERVAL_TYPE,
               INTERVAL_PREC
               INTO :junk1:indic1,
               :junk2:indic2,
               :junk3:indic3,
               :junk4:indic4,
               :junk5:indic5,
               :junk6:indic6,
               :junk7:indic7,
               :junk8:indic8,
               :junk9:indic9,
               :junk10:indica,
               :junk11:indicb
               FROM INFO_SCHEM.COLUMNS
               WHERE TABLE_SCHEM = 'FLATER'
               AND TABLE_NAME = 'USIG'
               AND COLUMN_NAME = 'C1' END-EXEC
             MOVE SQLCODE TO SQL-COD

      *Ignore values of parameters
             DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
             if (SQLCODE  <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 00000 or 01004; its value is ",
             SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "00000"  AND  NORMSQ  NOT  =
             "01004") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "00000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF

      *Remaining orphaned columns in SCHEMATA.

             DISPLAY "SELECT DEF_CHAR_SET_CAT,"
             DISPLAY "DEF_CHAR_SET_SCHEM,"
             DISPLAY "DEF_CHAR_SET_NAME"
             DISPLAY "INTO :junk1:indic1,"
             DISPLAY ":junk2:indic2,"
             DISPLAY ":junk3:indic3"
             DISPLAY "FROM INFO_SCHEM.SCHEMATA"
             DISPLAY "WHERE SCHEM_NAME = 'FLATER';"

             EXEC SQL SELECT DEF_CHAR_SET_CAT,
               DEF_CHAR_SET_SCHEM,
               DEF_CHAR_SET_NAME
               INTO :junk1:indic1,
               :junk2:indic2,
               :junk3:indic3
               FROM INFO_SCHEM.SCHEMATA
               WHERE SCHEM_NAME = 'FLATER' END-EXEC
             MOVE SQLCODE TO SQL-COD

      *Ignore values of parameters
             DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
             if (SQLCODE  <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 00000 or 01004; its value is ",
             SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "00000"  AND  NORMSQ  NOT  =
             "01004") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "00000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF

      *The regular rigamarole for USAGE_PRIVILEGES.

      *Verify visibility condition

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE GRANTEE NOT IN ('PUBLIC', USER)"
             DISPLAY "AND GRANTOR <> USER;"

             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE GRANTEE NOT IN ('PUBLIC', USER)
               AND GRANTOR <> USER END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify existence of 'USAGE' AS PRIVILEGE_TYPE

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE PRIVILEGE_TYPE <> 'USAGE'"
             DISPLAY "OR PRIVILEGE_TYPE IS NULL;"

             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE PRIVILEGE_TYPE <> 'USAGE'
               OR PRIVILEGE_TYPE IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT USAGE_PRIVILEGES_IS_GRANTABLE_NOT_NULL

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE IS_GRANTABLE IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE IS_GRANTABLE IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT USAGE_PRIVILEGES_IS_GRANTABLE_CHECK

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE IS_GRANTABLE NOT IN"
             DISPLAY "('YES', 'NO');"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE IS_GRANTABLE NOT IN
               ('YES', 'NO') END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify constraint USAGE_PRIVILEGES_PRIMARY_KEY

             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES"
             DISPLAY "WHERE GRANTOR IS NULL"
             DISPLAY "OR GRANTEE IS NULL"
             DISPLAY "OR OBJECT_SCHEM IS NULL"
             DISPLAY "OR OBJECT_NAME IS NULL"
             DISPLAY "OR OBJECT_TYPE IS NULL;"

             COMPUTE ctr1 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES
               WHERE GRANTOR IS NULL
               OR GRANTEE IS NULL
               OR OBJECT_SCHEM IS NULL
               OR OBJECT_NAME IS NULL
               OR OBJECT_TYPE IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES;"

             EXEC SQL SELECT COUNT(*) INTO :ctr1
               FROM INFO_SCHEM.USAGE_PRIVILEGES END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT COUNT(*) INTO :ctr2"
             DISPLAY "FROM INFO_SCHEM.USAGE_PRIVILEGES A,"
             DISPLAY "INFO_SCHEM.USAGE_PRIVILEGES B"
             DISPLAY "WHERE A.GRANTOR = B.GRANTOR"
             DISPLAY "AND A.GRANTEE = B.GRANTEE"
             DISPLAY "AND A.OBJECT_SCHEM = B.OBJECT_SCHEM"
             DISPLAY "AND A.OBJECT_NAME = B.OBJECT_NAME"
             DISPLAY "AND A.OBJECT_TYPE = B.OBJECT_TYPE;"

             COMPUTE ctr2 = -1
             EXEC SQL SELECT COUNT(*) INTO :ctr2
               FROM INFO_SCHEM.USAGE_PRIVILEGES A,
               INFO_SCHEM.USAGE_PRIVILEGES B
               WHERE A.GRANTOR = B.GRANTOR
               AND A.GRANTEE = B.GRANTEE
               AND A.OBJECT_SCHEM = B.OBJECT_SCHEM
               AND A.OBJECT_NAME = B.OBJECT_NAME
               AND A.OBJECT_TYPE = B.OBJECT_TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be equal to ctr2."
             DISPLAY "ctr1 is ", ctr1 "; ctr2 is ", ctr2 "."
             if (ctr1  NOT =  ctr2) then
               MOVE 0 TO flag
             END-IF

      *It might be reasonable to check the row for SQL_TEXT, but
      *I'll omit it since it's an orphaned feature.  The only
      *requirement is that, IF there is anything at all in the
      *table, then it meets all of the above constraints.

             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0609','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " ist007.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0609','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0609 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

¤ Dauer der Verarbeitung: 0.33 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.