products/sources/formale sprachen/Java/apache-tomcat-10.1.16-src/webapps/docs/config image not shown  

Quellcode-Bibliothek

© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: jaspic.xml   Sprache: XML

Original von: Apache©

<?xml version="1.0" encoding="UTF-8"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->

<!DOCTYPE document [
  <!ENTITY project SYSTEM "project.xml">
]>
<document url="jaspic.html">

  &project;

  <properties>
    <title>Jakarta Authentication (formerly JASPIC)</title>
  </properties>

<body>

<section name="Table of Contents">
<toc />
</section>

<section name="Introduction">

  <p>Tomcat implements <a
  href="https://jakarta.ee/specifications/authentication/3.0/">Jakarta
  Authentication 3.0</a>. The implementation is primarily intended to enable the
  integration of 3rd party authentication implementations with Tomcat.</p>

  <p>Jakarta Authentication may be configured in one of two ways:</p>
  <ul>
    <li>At the container level via the static configuration file
        <code>$CATALINA_BASE/conf/jaspic-providers.xml</code>. With this
        approach all required classes must be visible to Tomcat's Common class
        loader which normally means placing a JAR in
        <code>$CATALINA_BASE/lib</code>.</li>
     <li>At the web application level via dynamic configuration using the
         Jakarta Authentication API. With this approach all required classes
         must be visible to the web application class loader which normally
         means placing a JAR in the web application's WEB-INF/lib
         directory.</li>
  </ul>

  <p>Users should be aware that if the static Jakarta Authentication
     configuration file configures Jakarta Authentication for a given web
     application then the Jakarta Authentication configuration will take
     precedence over any <code><login-config></code> present in the web
     application's WEB-INF/web.xml file.



</section>

<section name="Static configuration">

  <subsection name="AuthConfigProvider">

    <p>If the 3rd party implementation includes an
    <code>AuthConfigProvider</code> then a web application can be configured to
    use it by nesting the following inside the
    <code><jaspic-providers></code> element in
    <code>$CATALINA_BASE/conf/jaspic-providers.xml</code>.</p>
<source><![CDATA[<provider name="any"
          className="fully.qualified.implementation.class.Name"
          layer="HttpServlet"
          appContext="Catalina/localhost /contextPath"
          description="any">
  <property name="see-provider-documentation"
            value="see-provider-documentation" />
</provider>]]></source>

    <p>The <code>name</code> and <code>description</code> attributes are not
    used by Tomcat.</p>

    <p>The <code>className</code> attribute must be the fully qualified class
    name of the <code>AuthConfigProvider</code>. The implementation may be
    packaged with the web application or in Tomcat's
    <code>$CATALINA_BASE/lib</code> directory.</p>

    <p>The <code>layer</code> attribute must be <code>HttpServlet</code>.</p>

    <p>The <code>appContext</code> attribute must be exactly the concatenation
    of:</p>
    <ul>
      <li>The engine name</li>
      <li>The forward slash character</li>
      <li>The host name</li>
      <li>A single space</li>
      <li>The context path</li>
    </ul>

    <p>If the <code>AuthConfigProvider</code> supports configuration via
    properties these may be specified via <code><property></code> elements
    nesting inside the <code><provide></code> element.</p>

  </subsection>

  <subsection name="ServerAuthModule">

    <p>If the 3rd party implementation only provides an
    <code>ServerAuthModule</code> then it will be necessary to provide a number
    of supporting classes. These may be a custom implementation or,
    alternatively, Tomcat provides a simple wrapper implementation for
    <code>ServerAuthModule</code>s.
    </p>

    <p>Tomcat's wrapper for <code>ServerAuthModule</code> can be configured
    by nesting the following inside the
    <code><jaspic-providers></code> element in
    <code>$CATALINA_BASE/conf/jaspic-providers.xml</code>.</p>
<source><![CDATA[<provider name="any"
          className="org.apache.catalina.authenticator.jaspic.SimpleAuthConfigProvider"
          layer="HttpServlet"
          appContext="Catalina/localhost /contextPath"
          description="any">
  <property name="org.apache.catalina.authenticator.jaspic.ServerAuthModule.1"
            value="fully.qualified.implementation.class.Name" />
  <property name="see-provider-documentation"
            value="see-provider-documentation" />
</provider>]]></source>

    <p>The configuration is similar to the <code>AuthConfigProvider</code> in
    the previous section but with some key differences.</p>

    <p>The <code>className</code> attribute must be
    <code>org.apache.catalina.authenticator.jaspic.SimpleAuthConfigProvider</code>.</p>

    <p>The <code>ServerAuthModule</code>(s) are specified via properties. The
    property name must be
    <code>org.apache.catalina.authenticator.jaspic.ServerAuthModule.n</code>
    where <code>n</code> is the index of the module. The index must start at 1
    an increment in steps of 1 until all modules are defined. The value of the
    property must be the fully qualified class name of the module.</p>
  </subsection>

</section>

<section name="Dynamic configuration">

  <p>Jakarta Authentication modules and configuration can be packaged within a
  WAR file with the web application. The web application can then register the
  required Jakarta Authentication configuration when it starts using the
  standard Jakarta Authentication APIs.</p>

  <p>If parallel deployment is being used then dynamic configuration should not
  be used. The Jakarta Authentication API assumes that a context path is unique
  for any given host which is not the case when using parallel deployment. When
  using parallel deployment, static Jakarta Authentication configuration should
  be used. This will require that all versions of the application use the same
  Jakarta Authentication configuration.</p>

</section>

<section name="3rd party modules">

  <p>This is not an exhaustive list. The Tomcat community welcomes contributions
  that add to this section.</p>

  <subsection name="Philip Green II's module for Google OAuth 2">

    <p>The source code for this module along with the
    <a href="https://github.com/phillipgreenii/google-oauth-2.0-serverauthmodule">documentation</a>
    which includes details of the necessary Google API configuration is
    available on GitHub.</p>

    <p>A sample configuration for using this module with Tomcat would look like
    this:</p>
<source><![CDATA[<jaspic-providers xmlns="https://tomcat.apache.org/xml"
                  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                  xsi:schemaLocation="https://tomcat.apache.org/xml jaspic-providers.xsd"
                  version="1.0">
  <provider name="google-oauth"
            className="org.apache.catalina.authenticator.jaspic.SimpleAuthConfigProvider"
            layer="HttpServlet"
            appContext="Catalina/localhost /contextPath"
            description="Google OAuth test">
    <property name="org.apache.catalina.authenticator.jaspic.ServerAuthModule.1"
              value="com.idmworks.security.google.GoogleOAuthServerAuthModule" />
    <property name="oauth.clientid"
              value="obtained-from-Google-console" />
    <property name="oauth.clientsecret"
              value="obtained-from-Google-console" />
    <property name="ignore_missing_login_context"
              value="true" />
  </provider>
</jaspic-providers>]]></source>
  </subsection>

</section>

</body>

</document>

¤ Dauer der Verarbeitung: 0.19 Sekunden  (vorverarbeitet)  ¤





Download des
Quellennavigators
Download des
sprechenden Kalenders

in der Quellcodebibliothek suchen




Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.


Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.


Bot Zugriff