Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/svtools/source/misc/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 9 kB image not shown  

Quelle  embedtransfer.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/embed/XEmbedPersist.hpp>
#include <com/sun/star/embed/NoVisualAreaSizeException.hpp>
#include <com/sun/star/datatransfer/XTransferable.hpp>
#include <com/sun/star/embed/Aspects.hpp>
#include <osl/diagnose.h>
#include <sot/exchange.hxx>
#include <svtools/embedtransfer.hxx>
#include <tools/mapunit.hxx>
#include <vcl/outdev.hxx>
#include <vcl/filter/SvmWriter.hxx>
#include <vcl/gdimtf.hxx>
#include <comphelper/fileformat.h>
#include <comphelper/propertysequence.hxx>
#include <comphelper/storagehelper.hxx>
#include <unotools/ucbstreamhelper.hxx>
#include <unotools/streamwrap.hxx>
#include <unotools/tempfile.hxx>
#include <toolkit/helper/vclunohelper.hxx>

#include <svtools/embedhlp.hxx>

using namespace ::com::sun::star;

SvEmbedTransferHelper::SvEmbedTransferHelper( const uno::Reference< embed::XEmbeddedObject >& xObj,
                                              const Graphic* pGraphic,
                                                sal_Int64 nAspect )
: m_xObj( xObj )
, m_nAspect( nAspect )
{
    if (pGraphic)
        m_oGraphic.emplace(*pGraphic);
    if( xObj.is() )
    {
        TransferableObjectDescriptor aObjDesc;

        FillTransferableObjectDescriptor( aObjDesc, m_xObj, nullptr, m_nAspect );
        PrepareOLE( aObjDesc );
    }
}


SvEmbedTransferHelper::~SvEmbedTransferHelper()
{
}

void SvEmbedTransferHelper::SetParentShellID( const OUString& rShellID )
{
    maParentShellID = rShellID;
}


void SvEmbedTransferHelper::AddSupportedFormats()
{
    AddFormat( SotClipboardFormatId::EMBED_SOURCE );
    AddFormat( SotClipboardFormatId::OBJECTDESCRIPTOR );
    AddFormat( SotClipboardFormatId::GDIMETAFILE );
    AddFormat( SotClipboardFormatId::BITMAP );
}


bool SvEmbedTransferHelper::GetData( const css::datatransfer::DataFlavor& rFlavor, const OUString& rDestDoc )
{
    bool bRet = false;

    if( m_xObj.is() )
    {
        try
        {
            SotClipboardFormatId nFormat = SotExchange::GetFormat( rFlavor );
            if( HasFormat( nFormat ) )
            {
                if( nFormat == SotClipboardFormatId::OBJECTDESCRIPTOR )
                {
                    TransferableObjectDescriptor aDesc;
                    FillTransferableObjectDescriptor( aDesc, m_xObj, m_oGraphic ? &*m_oGraphic : nullptr, m_nAspect );
                    bRet = SetTransferableObjectDescriptor( aDesc );
                }
                else if( nFormat == SotClipboardFormatId::EMBED_SOURCE )
                {
                    try
                    {
                        // TODO/LATER: Probably the graphic should be copied here as well
                        // currently it is handled by the applications
                        utl::TempFileFast aTmp;
                        uno::Reference < embed::XEmbedPersist > xPers( m_xObj, uno::UNO_QUERY );
                        if ( xPers.is() )
                        {
                            uno::Reference < embed::XStorage > xStg = comphelper::OStorageHelper::GetTemporaryStorage();
                            OUString aName( u"Dummy"_ustr );
                            SvStream* pStream = nullptr;
                            bool bDeleteStream = false;
                            uno::Sequence < beans::PropertyValue > aEmpty;
                            uno::Sequence<beans::PropertyValue> aObjArgs( comphelper::InitPropertySequence({
                                    { "SourceShellID", uno::Any(maParentShellID) },
                                    { "DestinationShellID", uno::Any(rDestDoc) }
                                }));
                            xPers->storeToEntry(xStg, aName, aEmpty, aObjArgs);
                            if ( xStg->isStreamElement( aName ) )
                            {
                                uno::Reference < io::XStream > xStm = xStg->cloneStreamElement( aName );
                                pStream = utl::UcbStreamHelper::CreateStream( xStm ).release();
                                bDeleteStream = true;
                            }
                            else
                            {
                                pStream = aTmp.GetStream( StreamMode::STD_READWRITE );
                                uno::Reference < embed::XStorage > xStor = comphelper::OStorageHelper::GetStorageFromStream( new utl::OStreamWrapper( *pStream ) );
                                xStg->openStorageElement( aName, embed::ElementModes::READ )->copyToStorage( xStor );
                            }

                            const sal_uInt32               nLen = pStream->TellEnd();
                            css::uno::Sequence< sal_Int8 > aSeq( nLen );

                            pStream->Seek( STREAM_SEEK_TO_BEGIN );
                            pStream->ReadBytes(aSeq.getArray(), nLen);
                            if ( bDeleteStream )
                                delete pStream;

                            bRet = aSeq.hasElements();
                            if( bRet )
                            {
                                SetAny( uno::Any(aSeq) );
                            }
                        }
                        else
                        {
                            //TODO/LATER: how to handle objects without persistence?!
                        }
                    }
                    catch ( uno::Exception& )
                    {
                    }
                }
                else if ( nFormat == SotClipboardFormatId::GDIMETAFILE && m_oGraphic )
                {
                    SvMemoryStream aMemStm( 65535, 65535 );
                    aMemStm.SetVersion( SOFFICE_FILEFORMAT_CURRENT );

                    const GDIMetaFile& aMetaFile = m_oGraphic->GetGDIMetaFile();
                    SvmWriter aWriter( aMemStm );
                    aWriter.Write( aMetaFile );
                    uno::Any aAny;
                    aAny <<= uno::Sequence< sal_Int8 >( static_castconst sal_Int8* >( aMemStm.GetData() ),
                                                    aMemStm.TellEnd() );
                    SetAny( aAny );
                    bRet = true;
                }
                else if ( ( nFormat == SotClipboardFormatId::BITMAP || nFormat == SotClipboardFormatId::PNG ) && m_oGraphic )
                {
                    bRet = SetBitmapEx( m_oGraphic->GetBitmapEx(), rFlavor );
                }
                else if ( m_xObj.is() && ::svt::EmbeddedObjectRef::TryRunningState( m_xObj ) )
                {
                    uno::Reference< datatransfer::XTransferable > xTransferable( m_xObj->getComponent(), uno::UNO_QUERY );
                    if ( xTransferable.is() )
                    {
                        uno::Any aAny = xTransferable->getTransferData( rFlavor );
                        SetAny( aAny );
                        bRet = true;
                    }
                }
            }
        }
        catch( uno::Exception& )
        {
            // Error handling?
        }
    }

    return bRet;
}


void SvEmbedTransferHelper::ObjectReleased()
{
    m_xObj.clear();
}

void SvEmbedTransferHelper::FillTransferableObjectDescriptor( TransferableObjectDescriptor& rDesc,
    const css::uno::Reference< css::embed::XEmbeddedObject >& xObj,
    const Graphic* pGraphic,
    sal_Int64 nAspect )
{
    //TODO/LATER: need TypeName to fill it into the Descriptor (will be shown in listbox)
    css::datatransfer::DataFlavor aFlavor;
    SotExchange::GetFormatDataFlavor( SotClipboardFormatId::OBJECTDESCRIPTOR, aFlavor );

    rDesc.maClassName = SvGlobalName( xObj->getClassID() );
    rDesc.maTypeName = aFlavor.HumanPresentableName;

    //TODO/LATER: the aspect size in the descriptor is wrong, unfortunately the stream
    // representation of the descriptor allows only 4 bytes for the aspect
    // so for internal transport something different should be found
    rDesc.mnViewAspect = sal::static_int_cast<sal_uInt16>( nAspect );

    Size aSize;
    MapMode aMapMode( MapUnit::Map100thMM );
    if ( nAspect == embed::Aspects::MSOLE_ICON )
    {
        if ( pGraphic )
        {
            aMapMode = pGraphic->GetPrefMapMode();
            aSize = pGraphic->GetPrefSize();
        }
        else
            aSize = Size( 2500, 2500 );
    }
    else
    {
        try
        {
            awt::Size aSz = xObj->getVisualAreaSize( rDesc.mnViewAspect );
            aSize = Size( aSz.Width, aSz.Height );
        }
        catch( embed::NoVisualAreaSizeException& )
        {
            OSL_FAIL( "Can not get visual area size!" );
            aSize = Size( 5000, 5000 );
        }

        // TODO/LEAN: getMapUnit can switch object to running state
        aMapMode = MapMode( VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( rDesc.mnViewAspect ) ) );
    }

    rDesc.maSize = OutputDevice::LogicToLogic( aSize, aMapMode, MapMode( MapUnit::Map100thMM ) );
    rDesc.maDragStartPos = Point();
    rDesc.maDisplayName.clear();
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=96 H=100 G=97

¤ Dauer der Verarbeitung: 0.12 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.