Quelle  pm660.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2020, Konrad Dybcio
 */

#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/thermal/thermal.h>

/ {
 thermal-zones {
  pm660-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&pm660_temp>;

   trips {
    pm660_alert0: pm660-alert0 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };
    pm660_crit: pm660-crit {
     temperature = <125000>;
     hysteresis = <2000>;
     type = "critical";
    };
   };
  };
 };
};

&spmi_bus {

 pmic@0 {
  compatible = "qcom,pm660", "qcom,spmi-pmic";
  reg = <0x0 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  rtc@6000 {
   compatible = "qcom,pm8941-rtc";
   reg = <0x6000>, <0x6100>;
   reg-names = "rtc", "alarm";
   interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  };

  pon: pon@800 {
   compatible = "qcom,pm8998-pon";
   reg = <0x800>;
   mode-bootloader = <0x2>;
   mode-recovery = <0x1>;

   pon_pwrkey: pwrkey {
    compatible = "qcom,pm8941-pwrkey";
    interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
    debounce = <15625>;
    bias-pull-up;
    linux,code = <KEY_POWER>;

    status = "disabled";
   };

   pon_resin: resin {
    compatible = "qcom,pm8941-resin";
    interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
    debounce = <15625>;
    bias-pull-up;

    status = "disabled";
   };
  };

  pm660_charger: charger@1000 {
   compatible = "qcom,pm660-charger";
   reg = <0x1000>;

   interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
         <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
         <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
         <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";

   io-channels = <&pm660_rradc 3>,
          <&pm660_rradc 4>;
   io-channel-names = "usbin_i", "usbin_v";

   status = "disabled";
  };

  pm660_temp: temp-alarm@2400 {
   compatible = "qcom,spmi-temp-alarm";
   reg = <0x2400>;
   interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
   io-channels = <&pm660_adc ADC5_DIE_TEMP>;
   io-channel-names = "thermal";
   #thermal-sensor-cells = <0>;
  };

  pm660_adc: adc@3100 {
   compatible = "qcom,spmi-adc-rev2";
   reg = <0x3100>;
   interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   #address-cells = <1>;
   #size-cells = <0>;
   #io-channel-cells = <1>;

   channel@0 {
    reg = <ADC5_REF_GND>;
    qcom,decimation = <1024>;
    qcom,pre-scaling = <1 1>;
    label = "ref_gnd";
   };

   channel@1 {
    reg = <ADC5_1P25VREF>;
    qcom,decimation = <1024>;
    qcom,pre-scaling = <1 1>;
    label = "vref_1p25";
   };

   channel@6 {
    reg = <ADC5_DIE_TEMP>;
    qcom,decimation = <1024>;
    qcom,pre-scaling = <1 1>;
    label = "die_temp";
   };

   channel@4c {
    reg = <ADC5_XO_THERM_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "xo_therm";
   };

   channel@4d {
    reg = <ADC5_AMUX_THM1_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "msm_therm";
   };

   channel@4e {
    reg = <ADC5_AMUX_THM2_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "emmc_therm";
   };

   channel@4f {
    reg = <ADC5_AMUX_THM3_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "pa_therm0";
   };

   channel@50 {
    reg = <ADC5_AMUX_THM4_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "pa_therm1";
   };

   channel@51 {
    reg = <ADC5_AMUX_THM5_100K_PU>;
    qcom,pre-scaling = <1 1>;
    qcom,decimation = <1024>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "quiet_therm";
   };

   channel@83 {
    reg = <ADC5_VPH_PWR>;
    qcom,decimation = <1024>;
    qcom,pre-scaling = <1 3>;
    label = "vph_pwr";
   };

   channel@85 {
    reg = <ADC5_VCOIN>;
    qcom,decimation = <1024>;
    qcom,pre-scaling = <1 3>;
    label = "vcoin";
   };
  };

  pm660_rradc: adc@4500 {
   compatible = "qcom,pm660-rradc";
   reg = <0x4500>;
   #io-channel-cells = <1>;

   status = "disabled";
  };

  pm660_gpios: gpio@c000 {
   compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
   reg = <0xc000>;
   gpio-controller;
   gpio-ranges = <&pm660_gpios 0 0 13>;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 pmic@1 {
  compatible = "qcom,pm660", "qcom,spmi-pmic";
  reg = <0x1 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pm660_spmi_regulators: regulators {
   compatible = "qcom,pm660-regulators";
  };
 };
};