Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/powerpc/boot/dts/fsl/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  kmcoge4.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
 *
 * (C) Copyright 2014
 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 */

/include/ "p2041si-pre.dtsi"

/ {
 model = "keymile,kmcoge4";
 compatible = "keymile,kmcoge4", "keymile,kmp204x";
 #address-cells = <2>;
 #size-cells = <2>;
 interrupt-parent = <&mpic>;

 memory {
  device_type = "memory";
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  bman_fbpr: bman-fbpr {
   size = <0 0x1000000>;
   alignment = <0 0x1000000>;
  };
  qman_fqd: qman-fqd {
   size = <0 0x400000>;
   alignment = <0 0x400000>;
  };
  qman_pfdr: qman-pfdr {
   size = <0 0x2000000>;
   alignment = <0 0x2000000>;
  };
 };

 dcsr: dcsr@f00000000 {
  ranges = <0x00000000 0xf 0x00000000 0x01008000>;
 };

 bportals: bman-portals@ff4000000 {
  ranges = <0x0 0xf 0xf4000000 0x200000>;
 };

 qportals: qman-portals@ff4200000 {
  ranges = <0x0 0xf 0xf4200000 0x200000>;
 };

 soc: soc@ffe000000 {
  ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  reg = <0xf 0xfe000000 0 0x00001000>;
  spi@110000 {
   flash@0 {
    #address-cells = <1>;
    #size-cells = <1>;
    compatible = "spansion,s25fl256s1", "jedec,spi-nor";
    reg = <0>;
    spi-max-frequency = <20000000>; /* input clock */
   };

   network_clock@1 {
    compatible = "zarlink,zl30343";
    reg = <1>;
    spi-max-frequency = <8000000>;
   };

   flash@2 {
    #address-cells = <1>;
    #size-cells = <1>;
    compatible = "micron,m25p32", "jedec,spi-nor";
    reg = <2>;
    spi-max-frequency = <15000000>;
   };
  };

  sdhc@114000 {
   status = "disabled";
  };

  i2c@119000 {
   status = "disabled";
  };

  i2c@119100 {
   status = "disabled";
  };

  usb0: usb@210000 {
   status = "disabled";
  };

  usb1: usb@211000 {
   status = "disabled";
  };

  sata@220000 {
   status = "disabled";
  };

  sata@221000 {
   status = "disabled";
  };

  fman0: fman@400000 {
   enet0: ethernet@e0000 {
    phy-connection-type = "sgmii";
    fixed-link {
     speed = <1000>;
     full-duplex;
    };
   };
   mdio0: mdio@e1120 {
    front_phy: ethernet-phy@11 {
     reg = <0x11>;
    };
   };

   enet1: ethernet@e2000 {
    phy-connection-type = "sgmii";
    fixed-link {
     speed = <1000>;
     full-duplex;
    };
   };
   enet2: ethernet@e4000 {
    status = "disabled";
   };

   enet3: ethernet@e6000 {
    status = "disabled";
   };
   enet4: ethernet@e8000 {
    phy-handle = <&front_phy>;
    phy-connection-type = "rgmii";
   };
   enet5: ethernet@f0000 {
    status = "disabled";
   };
  };
 };

 rio: rapidio@ffe0c0000 {
  status = "disabled";
 };

 lbc: localbus@ffe124000 {
  reg = <0xf 0xfe124000 0 0x1000>;
  ranges = <0 0 0xf 0xffa00000 0x00040000  /* LB 0 */
     1 0 0xf 0xfb000000 0x00010000  /* LB 1 */
     2 0 0xf 0xd0000000 0x10000000  /* LB 2 */
     3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */

  nand@0,0 {
   #address-cells = <1>;
   #size-cells = <1>;
   compatible = "fsl,elbc-fcm-nand";
   reg = <0 0 0x40000>;
  };

  board-control@1,0 {
   compatible = "keymile,qriox";
   reg = <1 0 0x80>;
  };

  chassis-mgmt@3,0 {
   compatible = "keymile,bfticu";
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <3 0 0x100>;
   interrupt-parent = <&mpic>;
   interrupts = <6 1 0 0>;
  };
 };

 pci0: pcie@ffe200000 {
  reg = <0xf 0xfe200000 0 0x1000>;
  ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
     0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
  pcie@0 {
   ranges = <0x02000000 0 0xe0000000
      0x02000000 0 0xe0000000
      0 0x20000000

      0x01000000 0 0x00000000
      0x01000000 0 0x00000000
      0 0x00010000>;
  };
 };

 pci1: pcie@ffe201000 {
  status = "disabled";
 };

 pci2: pcie@ffe202000 {
  reg = <0xf 0xfe202000 0 0x1000>;
  ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
     0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
  pcie@0 {
   ranges = <0x02000000 0 0xe0000000
      0x02000000 0 0xe0000000
      0 0x20000000

      0x01000000 0 0x00000000
      0x01000000 0 0x00000000
      0 0x00010000>;
  };
 };
};

/include/ "p2041si-post.dtsi"

[ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet)  ]