Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/net/wireless/ralink/rt2x00/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  rt2x00pci.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>

 */


/*
Module: rt2x00pci
Abstract: rt2x00 generic pci device routines.
 */


#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>

#include "rt2x00.h"
#include "rt2x00pci.h"

/*
 * PCI driver handlers.
 */

static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev)
{
 kfree(rt2x00dev->rf);
 rt2x00dev->rf = NULL;

 kfree(rt2x00dev->eeprom);
 rt2x00dev->eeprom = NULL;

 if (rt2x00dev->csr.base) {
  iounmap(rt2x00dev->csr.base);
  rt2x00dev->csr.base = NULL;
 }
}

static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
{
 struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);

 rt2x00dev->csr.base = pci_ioremap_bar(pci_dev, 0);
 if (!rt2x00dev->csr.base)
  goto exit;

 rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
 if (!rt2x00dev->eeprom)
  goto exit;

 rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
 if (!rt2x00dev->rf)
  goto exit;

 return 0;

exit:
 rt2x00_probe_err("Failed to allocate registers\n");

 rt2x00pci_free_reg(rt2x00dev);

 return -ENOMEM;
}

int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
{
 struct ieee80211_hw *hw;
 struct rt2x00_dev *rt2x00dev;
 int retval;
 u16 chip;

 retval = pci_enable_device(pci_dev);
 if (retval) {
  rt2x00_probe_err("Enable device failed\n");
  return retval;
 }

 retval = pci_request_regions(pci_dev, pci_name(pci_dev));
 if (retval) {
  rt2x00_probe_err("PCI request regions failed\n");
  goto exit_disable_device;
 }

 pci_set_master(pci_dev);

 if (pci_set_mwi(pci_dev))
  rt2x00_probe_err("MWI not available\n");

 if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) {
  rt2x00_probe_err("PCI DMA not supported\n");
  retval = -EIO;
  goto exit_release_regions;
 }

 hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
 if (!hw) {
  rt2x00_probe_err("Failed to allocate hardware\n");
  retval = -ENOMEM;
  goto exit_release_regions;
 }

 pci_set_drvdata(pci_dev, hw);

 rt2x00dev = hw->priv;
 rt2x00dev->dev = &pci_dev->dev;
 rt2x00dev->ops = ops;
 rt2x00dev->hw = hw;
 rt2x00dev->irq = pci_dev->irq;
 rt2x00dev->name = ops->name;

 if (pci_is_pcie(pci_dev))
  rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
 else
  rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);

 retval = rt2x00pci_alloc_reg(rt2x00dev);
 if (retval)
  goto exit_free_device;

 /*
 * Because rt3290 chip use different efuse offset to read efuse data.
 * So before read efuse it need to indicate it is the
 * rt3290 or not.
 */

 pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
 rt2x00dev->chip.rt = chip;

 retval = rt2x00lib_probe_dev(rt2x00dev);
 if (retval)
  goto exit_free_reg;

 return 0;

exit_free_reg:
 rt2x00pci_free_reg(rt2x00dev);

exit_free_device:
 ieee80211_free_hw(hw);

exit_release_regions:
 pci_clear_mwi(pci_dev);
 pci_release_regions(pci_dev);

exit_disable_device:
 pci_disable_device(pci_dev);

 return retval;
}
EXPORT_SYMBOL_GPL(rt2x00pci_probe);

void rt2x00pci_remove(struct pci_dev *pci_dev)
{
 struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
 struct rt2x00_dev *rt2x00dev = hw->priv;

 /*
 * Free all allocated data.
 */

 rt2x00lib_remove_dev(rt2x00dev);
 rt2x00pci_free_reg(rt2x00dev);
 ieee80211_free_hw(hw);

 /*
 * Free the PCI device data.
 */

 pci_clear_mwi(pci_dev);
 pci_disable_device(pci_dev);
 pci_release_regions(pci_dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_remove);

static int __maybe_unused rt2x00pci_suspend(struct device *dev)
{
 struct ieee80211_hw *hw = dev_get_drvdata(dev);
 struct rt2x00_dev *rt2x00dev = hw->priv;

 return rt2x00lib_suspend(rt2x00dev);
}

static int __maybe_unused rt2x00pci_resume(struct device *dev)
{
 struct ieee80211_hw *hw = dev_get_drvdata(dev);
 struct rt2x00_dev *rt2x00dev = hw->priv;

 return rt2x00lib_resume(rt2x00dev);
}

SIMPLE_DEV_PM_OPS(rt2x00pci_pm_ops, rt2x00pci_suspend, rt2x00pci_resume);
EXPORT_SYMBOL_GPL(rt2x00pci_pm_ops);

/*
 * rt2x00pci module information.
 */

MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("rt2x00 pci library");
MODULE_LICENSE("GPL");

Messung V0.5
C=97 H=90 G=93

¤ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.