Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/Cobol/Test-Suite/SQL M/     Datei vom 4.1.2008 mit Größe 47 kB image not shown  

Quelle  mpb011.cob   Sprache: Cobol

 
       IDENTIFICATION DIVISION.
       PROGRAM-ID.  MPB011.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "MPB011.SCO") calling SQL
      * procedures in file "MPB011.MCO".


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1994/3/4  STANDARD COBOL LANGUAGE                           
      * NIST SQL VALIDATION TEST SUITE V6.0                          
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * MPB011.SCO                                                    
      * WRITTEN BY:  David W. Flater                                 
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *                                                              
      * This program tests <grant statement> and <revoke statement>  
      * in dynamic SQL.  This is part B of a two-part                
      * concurrency test.  It must be run as HU after MPA011 is      
      * run as FLATER.                                               
      *                                                              
      * REFERENCES                                                   
      *   FIPS PUB 127-2 14.1 Transitional SQL                       
      *   ANSI SQL-1992                                              
      *                                                              
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  progno PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  dstmt PIC  X(50).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  pauze PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  pauze2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  repcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  fails PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  maxfls PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  oldtok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  waitin PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      * Debugging is turned on by setting debug1 = 1                 
       01  debug1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "HU " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, mpb011.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "This is part B of a two-part test. It should be
      -    " started"
             DISPLAY "AFTER mpa011. Table TOKENS must exist in schema
      -    " HU."

      *to debug program, set debug1 = 1 
             MOVE 0 TO debug1
             MOVE 1000 TO maxfls
             MOVE 1 TO pauze
             MOVE 2 TO pauze2
      *This is not a concurrency test. 
      *Using TEd, increase variable pauze if there is MAYDAY message. 
             MOVE 11 TO progno

      ******************** BEGIN TEST0629 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0629 "
             DISPLAY " (dynamic)"
             DISPLAY " This is program 'B'"
             DISPLAY "References:"
             DISPLAY " 11.36 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 1, 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "You should have already started Program A."
             MOVE 1 TO waitin

           .
        P194.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P194"
             END-IF
             if (waitin  =  -1) then
               GO TO P197
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin, "."
           .
        P104.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P104"
             END-IF
             COMPUTE int1 = -1
      *  EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
      *    WHERE PROG_NO = :progno;
             CALL "SUB3" USING SQLCODE SQLSTATE int1 progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
             END-IF
             if (int1  NOT =  oldtok  AND  SQLCODE  NOT <  0  AND 
             SQLCODE  NOT =  100 ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  SQLCODE  =  100  OR  int1  NOT = 
             waitin) then
      *Waste time and try again 
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  018 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB4" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P104
             END-IF

      *Start new transaction 
      *  EXEC SQL COMMIT WORK;
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  1) then
               GO TO P196
             END-IF
             if (int1  =  3) then
               GO TO P190
             END-IF
             if (int1  =  5) then
               GO TO P189
             END-IF
             GO TO P197

      *token == 1 
           .
        P196.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P196"
             END-IF
             DISPLAY "Program 'B' trying to access inaccessible table."

             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "PREPARE S01111 FROM :dstmt;"
      *  EXEC SQL PREPARE S01111 FROM :dstmt;
             CALL "SUB6" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P100
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01111 CURSOR FOR S01111;"
      *  EXEC SQL DECLARE C01111 CURSOR FOR S01111 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01111;"
      *  EXEC SQL OPEN C01111;
             CALL "SUB7" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P100
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01111 INTO :int1;"
      *  EXEC SQL FETCH C01111 INTO :int1;
             CALL "SUB8" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD

             DISPLAY "int1 should not be 1; its value is ", int1
             if (int1  =  1) then
               MOVE 0 TO flag
             END-IF

           .
        P100.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P100"
             END-IF
             DISPLAY "SQLCODE is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE C01111;"
      *  EXEC SQL CLOSE C01111;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD


             DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
             MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB10" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
             MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB11" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
             MOVE "DELETE FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB12" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 3 TO waitin
             GO TO P195

      *token == 3 
           .
        P190.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P190"
             END-IF
             DISPLAY "Program 'B' trying to access select-only table."

             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "PREPARE S01112 FROM :dstmt;"
      *  EXEC SQL PREPARE S01112 FROM :dstmt;
             CALL "SUB14" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01112 CURSOR FOR S01112;"
      *  EXEC SQL DECLARE C01112 CURSOR FOR S01112 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01112;"
      *  EXEC SQL OPEN C01112;
             CALL "SUB15" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01112 INTO :int1;"
      *  EXEC SQL FETCH C01112 INTO :int1;
             CALL "SUB16" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C01112;"
      *  EXEC SQL CLOSE C01112;
             CALL "SUB17" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
             MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB18" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
             MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB19" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
             MOVE "DELETE FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB20" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB21" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 5 TO waitin
             GO TO P195

      *token == 5 
           .
        P189.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P189"
             END-IF
             DISPLAY "Program 'B' trying to use all privileges."

             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "PREPARE S01114 FROM :dstmt;"
      *  EXEC SQL PREPARE S01114 FROM :dstmt;
             CALL "SUB22" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01114 CURSOR FOR S01114;"
      *  EXEC SQL DECLARE C01114 CURSOR FOR S01114 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01114;"
      *  EXEC SQL OPEN C01114;
             CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01114 INTO :int1;"
      *  EXEC SQL FETCH C01114 INTO :int1;
             CALL "SUB24" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C01114;"
      *  EXEC SQL CLOSE C01114;
             CALL "SUB25" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
             MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB26" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "OPEN C01114;"
      *  EXEC SQL OPEN C01114;
             CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01114 INTO :int1;"
      *  EXEC SQL FETCH C01114 INTO :int1;
             CALL "SUB28" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 2; its value is ", int1
             if (int1  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C01114;"
      *  EXEC SQL CLOSE C01114;
             CALL "SUB29" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
             MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB30" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011 WHERE
      -    " C1 = 0"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 WHERE C1 = 0 "
             TO dstmt

             DISPLAY "PREPARE S01113 FROM :dstmt;"
      *  EXEC SQL PREPARE S01113 FROM :dstmt;
             CALL "SUB31" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01113 CURSOR FOR S01113;"
      *  EXEC SQL DECLARE C01113 CURSOR FOR S01113 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01113;"
      *  EXEC SQL OPEN C01113;
             CALL "SUB32" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01113 INTO :int1;"
      *  EXEC SQL FETCH C01113 INTO :int1;
             CALL "SUB33" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 2; its value is ", int1
             if (int1  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C01113;"
      *  EXEC SQL CLOSE C01113;
             CALL "SUB34" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
             MOVE "DELETE FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB35" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "OPEN C01114;"
      *  EXEC SQL OPEN C01114;
             CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C01114 INTO :int1;"
      *  EXEC SQL FETCH C01114 INTO :int1;
             CALL "SUB37" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 0; its value is ", int1
             if (int1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C01114;"
      *  EXEC SQL CLOSE C01114;
             CALL "SUB38" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB39" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "Program 'B' trying to use grant option (should
      -    " fail)."

             DISPLAY "dstmt=""GRANT SELECT ON FLATER.GRANT011 TO
      -    " SCHANZLE"""
             MOVE "GRANT SELECT ON FLATER.GRANT011 TO SCHANZLE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB40" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 01007; its value is ", SQLSTATE
             if (SQLCODE  <  0  OR  SQLSTATE  NOT  =   "01007") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB41" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             COMPUTE waitin = -1

           .
        P195.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P195"
             END-IF
             MOVE 0 TO fails
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P193.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P193"
             END-IF
      *  EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
      *    WHERE PROG_NO = :progno;
             CALL "SUB42" USING SQLCODE SQLSTATE progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again 
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  019 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB43" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB44" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again 
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  020 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB45" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P194

      *after token == 5 
           .
        P197.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P197"
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0629','pass','MCO');
               CALL "SUB46" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpb011.sco *** fail *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0629','fail','MCO');
               CALL "SUB47" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB48" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0629 ********************
      ******************** BEGIN TEST0630 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0630 "
             DISPLAY " (dynamic)"
             DISPLAY " This is program 'B'"
             DISPLAY "References:"
             DISPLAY " 11.37 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 1, 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "You should have already started Program A."
             MOVE 1 TO waitin

           .
        P160.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P160"
             END-IF
             if (waitin  =  -1) then
               GO TO P163
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin, "."
           .
        P161.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P161"
             END-IF
             COMPUTE int1 = -1
      *  EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
      *    WHERE PROG_NO = :progno;
             CALL "SUB49" USING SQLCODE SQLSTATE int1 progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
             END-IF
             if (int1  NOT =  oldtok  AND  SQLCODE  NOT <  0  AND 
             SQLCODE  NOT =  100 ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  SQLCODE  =  100  OR  int1  NOT = 
             waitin) then
      *Waste time and try again 
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  021 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB50" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P161
             END-IF

      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  1) then
               GO TO P162
             END-IF
             if (int1  =  3) then
               GO TO P170
             END-IF
             GO TO P163

      *token == 1 
           .
        P162.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P162"
             END-IF
             DISPLAY "Program 'B' trying to access insert-only table."

             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "PREPARE S01121 FROM :dstmt;"
      *  EXEC SQL PREPARE S01121 FROM :dstmt;
             CALL "SUB51" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P101
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01121 CURSOR FOR S01121;"
      *  EXEC SQL DECLARE C01121 CURSOR FOR S01121 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01121;"
      *  EXEC SQL OPEN C01121;
             CALL "SUB52" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P101
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "FETCH C01121 INTO :int1;"
      *  EXEC SQL FETCH C01121 INTO :int1;
             CALL "SUB53" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD

           .
        P101.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P101"
             END-IF
             DISPLAY "SQLCODE is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE C01121;"
      *  EXEC SQL CLOSE C01121;
             CALL "SUB54" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD


             DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
             MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB55" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "


             DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
             MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB56" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
             MOVE "DELETE FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB57" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB58" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 3 TO waitin
             GO TO P164

      *token == 3 
           .
        P170.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P170"
             END-IF
             DISPLAY "Program 'B' trying to access inaccessible table."

             DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
             MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "PREPARE S01122 FROM :dstmt;"
      *  EXEC SQL PREPARE S01122 FROM :dstmt;
             CALL "SUB59" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P102
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C01122 CURSOR FOR S01122;"
      *  EXEC SQL DECLARE C01122 CURSOR FOR S01122 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C01122;"
      *  EXEC SQL OPEN C01122;
             CALL "SUB60" USING SQLCODE SQLSTATE, SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               GO TO P102
             END-IF
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "FETCH C01122 INTO :int1;"
      *  EXEC SQL FETCH C01122 INTO :int1;
             CALL "SUB61" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD

           .
        P102.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P102"
             END-IF
             DISPLAY "SQLCODE is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE C01122;"
      *  EXEC SQL CLOSE C01122;
             CALL "SUB62" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD


             DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
             MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB63" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
             MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB64" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
             MOVE "DELETE FROM FLATER.GRANT011 "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
      *  EXEC SQL EXECUTE IMMEDIATE :dstmt;
             CALL "SUB65" USING SQLCODE SQLSTATE dstmt
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "


             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB66" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             COMPUTE waitin = -1

           .
        P164.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P164"
             END-IF
             MOVE 0 TO fails
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P165.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P165"
             END-IF
      *  EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
      *    WHERE PROG_NO = :progno;
             CALL "SUB67" USING SQLCODE SQLSTATE progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again 
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  022 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB68" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P165
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB69" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again 
               DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
             SQLSTATE,  "'"
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  023 
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB70" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P165
             END-IF
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P160

      *after token == 3 
           .
        P163.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P163"
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0630','pass','MCO');
               CALL "SUB71" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpb011.sco *** fail *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0630','fail','MCO');
               CALL "SUB72" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB73" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0630 ********************
           STOP RUN.

        P198.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P198"
             END-IF
             DISPLAY "CARDINALITY VIOLATION"
           .
        P199.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P199"
             END-IF
             if (fails  >  maxfls)  then
               DISPLAY "The number of attempts (fails) exceeds variable
      -    " maxfls."
               DISPLAY "Increase the value of variable maxfls, if
      -    " needed."
               DISPLAY "Or, increase the value of variable pauze."
             END-IF
             DISPLAY "MAYDAY MAYDAY PROGRAM ABORTING"
             DISPLAY "You will have to start this test over."
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.


       SLEEEP.
             COMPUTE repcnt = fails * pauze
             if (repcnt  >  17) then
               COMPUTE repcnt = repcnt * repcnt + pauze2
             END-IF
             MOVE 1 TO iii
           .
       P133.
      *  EXEC SQL COMMIT WORK;
             CALL "SUB74" USING SQLCODE SQLSTATE
             COMPUTE int1 = -1
      *  EXEC SQL UPDATE HU.WORKS
      *    SET HOURS = -1 WHERE HOURS = :int1;
             CALL "SUB75" USING SQLCODE SQLSTATE int1
             COMPUTE iii = iii + 1
             if (iii  <  repcnt) then
               GO TO P133
             END-IF
             .

95%


¤ Dauer der Verarbeitung: 0.35 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland




Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.