Quelle yts767.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS767.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "YTS767.PCO")

      *Copyright 1996 National Computing Centre Ltd,
      *and Computer Logic R&D S.A
      *on behalf of CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * YTS767.PCO
      * WRITTEN BY:  Susan Watters
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * Access To CHECK_CONSTRAINTS view
      * a) Explicit table constraints in CHECK_CONSTRAINTS view
      * b) Column constraints in CHECK_CONSTRAINTS view.
      * c) Domain constraints in CHECK_CONSTRAINTS view.
      * d) Unique identification in CHECK_CONSTRAINTS view.
      *
      *
      * REFERENCES
      *   21.2.15  CHECK_CONSTRAINTS view
      *   21.2.13  TABLE_CONSTRAINTS view
      *   11.4 SR9 <column constraint definition>
      *   11.6 SR1 <table constraint definition>
      *   11.9     <check constraint definition>
      *   10.6 SR2 <constraint name definition> and
      *            <constraint attributes>
      *   11.6 SR2 <table constraint definition>
      *   11.21    <domain definition>
      *   F# 33    Constraint tables
      *   F# 25    Domain definition
      *   F# 17    Multiple schemas per user
      *   F# 3     Basic schema manipulation
      *   F# 2     Basic information schema
      *
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
      * 12.12.95 Remove references to CONSTRAINT_SCHEMA
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-03-11
      *   Added rollback after authid
      *   Removed EXEC SQL from inside printf
      *   Fixed identifiers in info schem
      *   Get constraint schema too in case name is re-used
      *   Cleanups
      *   Added visual check warning
      *   Fixed string length
      *   Fixed syntax errors
      *   Fixed bad schema references
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  conam1 PIC  X(128).
       01  cosch1 PIC  X(128).
       01  chck PIC  X(30).
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  co2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, yts767.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7544 *******************
             MOVE 1 TO flag
             MOVE 1 TO flag2

             DISPLAY " TEST7544 "
             DISPLAY " Explicit table constr. in CHECK_CONSTRAINTS
      -    " view"
             DISPLAY "References:"
             DISPLAY " 21.2.15 CHECK_CONSTRAINTS view"
             DISPLAY " 21.3.13 TABLE_CONSTRAINTS view"
             DISPLAY " 11.4 SR9 "
             DISPLAY " 11.6 SR1 "
             DISPLAY " 11.9 "
             DISPLAY " 10.6 SR2 and "
             DISPLAY " "
             DISPLAY " 11.6 SR2

"
             DISPLAY " F# 33 Constraint tables"
             DISPLAY " F# 17 Multiple schemas per user"
             DISPLAY " F# 3 Basic schema manipulation"
             DISPLAY " F# 2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *ensure CHECK CONSTRAINT in table staff7 schema CTS1 appears
      *initialise all variables
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             MOVE 99 TO indic1

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "TABLE_NAME = 'STAFF7' AND"
             DISPLAY "CONSTRAINT_TYPE = 'CHECK';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1' AND
               TABLE_NAME = 'STAFF7' AND
               CONSTRAINT_TYPE = 'CHECK' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check row is featured in the CHECK_CONSTRAINTS view

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check value returned is correct
      *as length of check clause is above 18 chars the implementation
      *may store either a NULL value or the check clause itself

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (GRADE BETWEEN 1 AND
      -    " 20)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (GRADE BETWEEN 1 AND 20)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF

             DISPLAY  " "

      *ensure CHECK_CONSTRAINT in table staff7, schema cts1b appears
      *initialise all variables

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck
             MOVE 99 TO indic1

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1B' AND"
             DISPLAY "TABLE_NAME = 'STAFF7';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1B' AND
               TABLE_NAME = 'STAFF7' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check row is featured in the CHECK_CONSTRAINTS view

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check value returned is correct
      *as length of check clause is above 18 chars the implementation
      *may store either a NULL value or the check clause itself

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (GRADE BETWEEN 1 AND
      -    " 20)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (GRADE BETWEEN 1 AND 20)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

      *ensure CHECK CONSTRAINT in PROJ_DURATION schema CTS1 appears

      *reinitialise all variables

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "TABLE_NAME = 'PROJ_DURATION';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1' AND
               TABLE_NAME = 'PROJ_DURATION' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check row is featured in the CHECK_CONSTRAINTS view

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (MONTHS > 0)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (MONTHS > 0)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

      *ensure CHECK CONSTRAINT in PROJ_DURATION schema CTS1b appears

      *reinitialise all variables

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1B' AND"
             DISPLAY "TABLE_NAME = 'PROJ_DURATION';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1B' AND
               TABLE_NAME = 'PROJ_DURATION' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check row is featured in the CHECK_CONSTRAINTS view

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *ensure value for CHECK_CLAUSE is as expected

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (MONTHS > 0)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (MONTHS > 0)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (flag  NOT =  1) then
               DISPLAY " yts767.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7544','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             else
               if (flag2  =  1) then
                 DISPLAY " yts767.pco *** pass *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7544','pass','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
               else
                 DISPLAY " yts767.pco *** nogo *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7544','nogo','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
                 COMPUTE errcnt = errcnt + 1
               END-IF
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7544 ********************
      ******************** BEGIN TEST7545 *******************
             MOVE 1 TO flag
             MOVE 1 TO flag2

             DISPLAY " TEST7545 "
             DISPLAY " Column constraints in CHECK_CONSTRAINTS view"
             DISPLAY "References:"
             DISPLAY " 21.2.15 CHECK_CONSTRAINTS view"
             DISPLAY " 21.3.13 TABLE_CONSTRAINTS view"
             DISPLAY " 11.4 SR9 "
             DISPLAY " 11.6 SR1

"
             DISPLAY " 11.9 "
             DISPLAY " 10.6 SR2 and "
             DISPLAY " "
             DISPLAY " 11.6 SR2

"
             DISPLAY " F# 33 Constraint tables"
             DISPLAY " F# 17 Multiple Schemas Per User"
             DISPLAY " F# 3 Basic Schema Manipulation"
             DISPLAY " F# 2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "CONSTRAINT_TYPE = 'CHECK' AND"
             DISPLAY "TABLE_NAME = 'STAFFZ';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1' AND
               CONSTRAINT_TYPE = 'CHECK' AND
               TABLE_NAME = 'STAFFZ' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (SALARY > 0)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (SALARY > 0)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1B' AND"
             DISPLAY "CONSTRAINT_TYPE = 'CHECK' AND"
             DISPLAY "TABLE_NAME = 'STAFFZ';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
               WHERE TABLE_SCHEMA = 'CTS1B' AND
               CONSTRAINT_TYPE = 'CHECK' AND
               TABLE_NAME = 'STAFFZ' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (SALARY > 0)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (SALARY > 0)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (flag  NOT =  1) then
               DISPLAY " yts767.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7545','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             else
               if (flag2  =  1) then
                 DISPLAY " yts767.pco *** pass *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7545','pass','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
               else
                 DISPLAY " yts767.pco *** nogo *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7545','nogo','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
                 COMPUTE errcnt = errcnt + 1
               END-IF
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7545 ********************
      ******************** BEGIN TEST7546 *******************
             MOVE 1 TO flag
             MOVE 1 TO flag2

             DISPLAY " TEST7546 "
             DISPLAY " Domain constraints in CHECK_CONSTRAINTS view"
             DISPLAY "References:"
             DISPLAY " 21.2.15 CHECK_CONSTRAINTS view"
             DISPLAY " 21.3.13 TABLE_CONSTRAINTS view"
             DISPLAY " 11.4 SR9 "
             DISPLAY " 11.6 SR1

"
             DISPLAY " 11.9 "
             DISPLAY " 10.6 SR2 and "
             DISPLAY " "
             DISPLAY " 11.6 SR2

"
             DISPLAY " 11.21 "
             DISPLAY " F# 33 Constraint tables"
             DISPLAY " F# 25 Domain definition"
             DISPLAY " F# 17 Multiple Schemas Per User"
             DISPLAY " F# 3 Basic Schema Manipulation"
             DISPLAY " F# 2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS"
             DISPLAY "WHERE DOMAIN_SCHEMA = 'CTS1' AND"
             DISPLAY "DOMAIN_NAME = 'ESAL';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS
               WHERE DOMAIN_SCHEMA = 'CTS1' AND
               DOMAIN_NAME = 'ESAL' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (VALUE > 500)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (VALUE > 500)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO conam1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cosch1

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO chck

             DISPLAY "SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME"
             DISPLAY "INTO :cosch1, :conam1"
             DISPLAY "FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS"
             DISPLAY "WHERE DOMAIN_SCHEMA = 'CTS1B' AND"
             DISPLAY "DOMAIN_NAME = 'ESAL';"
             EXEC SQL SELECT CONSTRAINT_SCHEMA, CONSTRAINT_NAME
               INTO :cosch1, :conam1
               FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS
               WHERE DOMAIN_SCHEMA = 'CTS1B' AND
               DOMAIN_NAME = 'ESAL' END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT CHECK_CLAUSE INTO :chck:indic1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = :cosch1"
             DISPLAY "AND CONSTRAINT_NAME = :conam1;"
             EXEC SQL SELECT CHECK_CLAUSE INTO :chck:indic1
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA = :cosch1
               AND CONSTRAINT_NAME = :conam1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (indic1  =  -1) then
               DISPLAY "indic1 is -1 -- skip subtest"
             else
               DISPLAY "Value expected is CHECK (VALUE > 500)"
               DISPLAY "chck is ", chck
               if (chck  NOT  =   "CHECK (VALUE > 500)") then
                 DISPLAY "VISUAL CHECK REQUIRED -- ALTERNATE SYNTAX MAY
      -    " BE VALID"
                 MOVE 0 TO flag2
               END-IF
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (flag  NOT =  1) then
               DISPLAY " yts767.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7546','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             else
               if (flag2  =  1) then
                 DISPLAY " yts767.pco *** pass *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7546','pass','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
               else
                 DISPLAY " yts767.pco *** nogo *** "
                 EXEC SQL INSERT INTO CTS1.TESTREPORT
                   VALUES('7546','nogo','PCO') END-EXEC
                 MOVE SQLCODE TO SQL-COD
                 COMPUTE errcnt = errcnt + 1
               END-IF
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7546 ********************
      ******************** BEGIN TEST7547 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7547 "
             DISPLAY " Unique identification in CHECK_CONSTRAINTS
      -    " view"
             DISPLAY "References:"
             DISPLAY " 21.2.15 CHECK_CONSTRAINTS view"
             DISPLAY " 21.3.13 TABLE_CONSTRAINTS view"
             DISPLAY " 11.4 SR9 "
             DISPLAY " 11.6 SR1

"
             DISPLAY " 11.9 "
             DISPLAY " 10.6 SR2 and "
             DISPLAY " "
             DISPLAY " 11.6 SR2

"
             DISPLAY " F# 33 Constraint tables"
             DISPLAY " F# 17 Multiple Schemas Per User"
             DISPLAY " F# 3 Basic Schema Manipulation"
             DISPLAY " F# 2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *check CONSTRAINT_CATALOG contains no NULL values

             DISPLAY "SELECT COUNT (*) INTO :co"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_CATALOG IS NULL"
             EXEC SQL SELECT COUNT (*) INTO :co
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_CATALOG IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "co should be 0; its value is ", co
             if (co  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *check constraint_schema contains no null values
             DISPLAY "SELECT COUNT (*) INTO :co"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA IS NULL;"
             EXEC SQL SELECT COUNT (*) INTO :co
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_SCHEMA IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "co should be 0; its value is ", co
             if (co  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *check constraint_name contains no NULL values

             DISPLAY "SELECT COUNT (*) INTO :co"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_NAME IS NULL;"
             EXEC SQL SELECT COUNT (*) INTO :co
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_NAME IS NULL END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "co should be 0; its value is ", co
             if (co  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *check combined values of CATALOG,
      *NAME and SCHEMA are unique

             MOVE 99 TO co
             COMPUTE co2 = -1
             DISPLAY "SELECT COUNT (*) INTO :co"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS;"
             EXEC SQL SELECT COUNT (*) INTO :co
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT COUNT (*) INTO :co2"
             DISPLAY "FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS AS T"
             DISPLAY "WHERE"
             DISPLAY "UNIQUE ("
             DISPLAY " SELECT * FROM
      -    " INFORMATION_SCHEMA.CHECK_CONSTRAINTS"
             DISPLAY " WHERE CONSTRAINT_CATALOG =
      -    " T.CONSTRAINT_CATALOG AND"
             DISPLAY " CONSTRAINT_NAME = T.CONSTRAINT_NAME AND"
             DISPLAY " CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA"
             DISPLAY " );"
             EXEC SQL SELECT COUNT (*) INTO :co2
               FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS AS T
               WHERE
               UNIQUE (
               SELECT * FROM INFORMATION_SCHEMA.CHECK_CONSTRAINTS
               WHERE CONSTRAINT_CATALOG = T.CONSTRAINT_CATALOG AND
               CONSTRAINT_NAME = T.CONSTRAINT_NAME AND
               CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "co should be equal to co2; co is ", co, ", co2 is
      -    " ", co2
             if (co  NOT =  co2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts767.pco *** pass *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7547','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts767.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7547','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7547 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality100%

¤ Dauer der Verarbeitung: 0.24 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.