Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Firefox/accessible/windows/msaa/   (Browser von der Mozilla Stiftung Version 136.0.1©)  Datei vom 10.2.2025 mit Größe 2 kB image not shown  

Impressum mpage.c   Sprache: unbekannt

 
Haftungsausschluß.c KontaktUnknown {[0] [0] [0]}diese Dinge liegen außhalb unserer Verantwortung

// SPDX-License-Identifier: GPL-2.0
/*
 * fs/mpage.c
 *
 * Copyright (C) 2002, Linus Torvalds.
 *
 * Contains functions related to preparing and submitting BIOs which contain
 * multiple pagecache pages.
 *
 * 15May2002 Andrew Morton
 *  Initial version
 * 27Jun2002 axboe@suse.de
 *  use bio_add_page() to build bio's just the right size
 */

#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/kdev_t.h>
#include <linux/gfp.h>
#include <linux/bio.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/highmem.h>
#include <linux/prefetch.h>
#include <linux/mpage.h>
#include <linux/mm_inline.h>
#include <linux/writeback.h>
#include <linux/backing-dev.h>
#include <linux/pagevec.h>
#include "internal.h"

/*
 * I/O completion handler for multipage BIOs.
 *
 * The mpage code never puts partial pages into a BIO (except for end-of-file).
 * If a page does not map to a contiguous run of blocks then it simply falls
 * back to block_read_full_folio().
 *
 * Why is this?  If a page's completion depends on a number of different BIOs
 * which can complete in any order (or at the same time) then determining the
 * status of that page is hard.  See end_buffer_async_read() for the details.
 * There is no point in duplicating all that complexity.
 */
static void mpage_read_end_io(struct bio *bio)
{
 struct folio_iter fi;
 int err = blk_status_to_errno(bio->bi_status);

 bio_for_each_folio_all(fi, bio)
  folio_end_read(fi.folio, err == 0);

 bio_put(bio);
}

static void mpage_write_end_io(struct bio *bio)
{
 struct folio_iter fi;
 int err = blk_status_to_errno(bio->bi_status);

 bio_for_each_folio_all(fi, bio) {
  if (err)
   mapping_set_error(fi.folio->mapping, err);
  folio_end_writeback(fi.folio);
 }

 bio_put(bio);
}

static struct bio *mpage_bio_submit_read(struct bio *bio)
{
 bio->bi_end_io = mpage_read_end_io;
 guard_bio_eod(bio);
 submit_bio(bio);
 return NULL;
}

static struct bio *mpage_bio_submit_write(struct bio *bio)
{
 bio->bi_end_io = mpage_write_end_io;
 guard_bio_eod(bio);
 submit_bio(bio);
 return NULL;
}

/*
 * support function for mpage_readahead.  The fs supplied get_block might
 * return an up to date buffer.  This is used to map that buffer into
 * the page, which allows read_folio to avoid triggering a duplicate call
 * to get_block.
 *
 * The idea is to avoid adding buffers to pages that don't already have
 * them.  So when the buffer is up to date and the page size == block size,
 * this marks the page up to date instead of adding new buffers.
 */
static void map_buffer_to_folio(struct folio *folio, struct buffer_head *bh,
  int page_block)
{
 struct inode *inode = folio->mapping->host;
 struct buffer_head *page_bh, *head;
 int block = 0;

 head = folio_buffers(folio);
 if (!head) {
  /*
   * don't make any buffers if there is only one buffer on
   * the folio and the folio just needs to be set up to date
   */
  if (inode->i_blkbits == folio_shift(folio) &&
      buffer_uptodate(bh)) {
   folio_mark_uptodate(folio);
   return;
  }
  head = create_empty_buffers(folio, i_blocksize(inode), 0);
 }

 page_bh = head;
 do {
  if (block == page_block) {
   page_bh->b_state = bh->b_state;
   page_bh->b_bdev = bh->b_bdev;
   page_bh->b_blocknr = bh->b_blocknr;
   break;
  }
  page_bh = page_bh->b_this_page;
  block++;
 } while (page_bh != head);
}

struct mpage_readpage_args {
 struct bio *bio;
 struct folio *folio;
 unsigned int nr_pages;
 bool is_readahead;
 sector_t last_block_in_bio;
 struct buffer_head map_bh;
 unsigned long first_logical_block;
 get_block_t *get_block;
};

/*
 * This is the worker routine which does all the work of mapping the disk
 * blocks and constructs largest possible bios, submits them for IO if the
 * blocks are not contiguous on the disk.
 *
 * We pass a buffer_head back and forth and use its buffer_mapped() flag to
 * represent the validity of its disk mapping and to decide when to do the next
 * get_block() call.
 */
static struct bio *do_mpage_readpage(struct mpage_readpage_args *args)
{
 struct folio *folio = args->folio;
 struct inode *inode = folio->mapping->host;
 const unsigned blkbits = inode->i_blkbits;
 const unsigned blocks_per_folio = folio_size(folio) >> blkbits;
 const unsigned blocksize = 1 << blkbits;
 struct buffer_head *map_bh = &args->map_bh;
 sector_t block_in_file;
 sector_t last_block;
 sector_t last_block_in_file;
 sector_t first_block;
 unsigned page_block;
 unsigned first_hole = blocks_per_folio;
 struct block_device *bdev = NULL;
 int length;
 int fully_mapped = 1;
 blk_opf_t opf = REQ_OP_READ;
 unsigned nblocks;
 unsigned relative_block;
 gfp_t gfp = mapping_gfp_constraint(folio->mapping, GFP_KERNEL);

 if (args->is_readahead) {
  opf |= REQ_RAHEAD;
  gfp |= __GFP_NORETRY | __GFP_NOWARN;
 }

 if (folio_buffers(folio))
  goto confused;

 block_in_file = folio_pos(folio) >> blkbits;
 last_block = block_in_file + ((args->nr_pages * PAGE_SIZE) >> blkbits);
 last_block_in_file = (i_size_read(inode) + blocksize - 1) >> blkbits;
 if (last_block > last_block_in_file)
  last_block = last_block_in_file;
 page_block = 0;

 /*
  * Map blocks using the result from the previous get_blocks call first.
  */
 nblocks = map_bh->b_size >> blkbits;
 if (buffer_mapped(map_bh) &&
   block_in_file > args->first_logical_block &&
   block_in_file < (args->first_logical_block + nblocks)) {
  unsigned map_offset = block_in_file - args->first_logical_block;
  unsigned last = nblocks - map_offset;

  first_block = map_bh->b_blocknr + map_offset;
  for (relative_block = 0; ; relative_block++) {
   if (relative_block == last) {
    clear_buffer_mapped(map_bh);
    break;
   }
   if (page_block == blocks_per_folio)
    break;
   page_block++;
   block_in_file++;
  }
  bdev = map_bh->b_bdev;
 }

 /*
  * Then do more get_blocks calls until we are done with this folio.
  */
 map_bh->b_folio = folio;
 while (page_block < blocks_per_folio) {
  map_bh->b_state = 0;
  map_bh->b_size = 0;

  if (block_in_file < last_block) {
   map_bh->b_size = (last_block-block_in_file) << blkbits;
   if (args->get_block(inode, block_in_file, map_bh, 0))
    goto confused;
   args->first_logical_block = block_in_file;
  }

  if (!buffer_mapped(map_bh)) {
   fully_mapped = 0;
   if (first_hole == blocks_per_folio)
    first_hole = page_block;
   page_block++;
   block_in_file++;
   continue;
  }

  /* some filesystems will copy data into the page during
   * the get_block call, in which case we don't want to
   * read it again.  map_buffer_to_folio copies the data
   * we just collected from get_block into the folio's buffers
   * so read_folio doesn't have to repeat the get_block call
   */
  if (buffer_uptodate(map_bh)) {
   map_buffer_to_folio(folio, map_bh, page_block);
   goto confused;
  }
 
  if (first_hole != blocks_per_folio)
   goto confused;  /* hole -> non-hole */

  /* Contiguous blocks? */
  if (!page_block)
   first_block = map_bh->b_blocknr;
  else if (first_block + page_block != map_bh->b_blocknr)
   goto confused;
  nblocks = map_bh->b_size >> blkbits;
  for (relative_block = 0; ; relative_block++) {
   if (relative_block == nblocks) {
    clear_buffer_mapped(map_bh);
    break;
   } else if (page_block == blocks_per_folio)
    break;
   page_block++;
   block_in_file++;
  }
  bdev = map_bh->b_bdev;
 }

 if (first_hole != blocks_per_folio) {
  folio_zero_segment(folio, first_hole << blkbits, folio_size(folio));
  if (first_hole == 0) {
   folio_mark_uptodate(folio);
   folio_unlock(folio);
   goto out;
  }
 } else if (fully_mapped) {
  folio_set_mappedtodisk(folio);
 }

 /*
  * This folio will go to BIO.  Do we need to send this BIO off first?
  */
 if (args->bio && (args->last_block_in_bio != first_block - 1))
  args->bio = mpage_bio_submit_read(args->bio);

alloc_new:
 if (args->bio == NULL) {
  args->bio = bio_alloc(bdev, bio_max_segs(args->nr_pages), opf,
          gfp);
  if (args->bio == NULL)
   goto confused;
  args->bio->bi_iter.bi_sector = first_block << (blkbits - 9);
 }

 length = first_hole << blkbits;
 if (!bio_add_folio(args->bio, folio, length, 0)) {
  args->bio = mpage_bio_submit_read(args->bio);
  goto alloc_new;
 }

 relative_block = block_in_file - args->first_logical_block;
 nblocks = map_bh->b_size >> blkbits;
 if ((buffer_boundary(map_bh) && relative_block == nblocks) ||
     (first_hole != blocks_per_folio))
  args->bio = mpage_bio_submit_read(args->bio);
 else
  args->last_block_in_bio = first_block + blocks_per_folio - 1;
out:
 return args->bio;

confused:
 if (args->bio)
  args->bio = mpage_bio_submit_read(args->bio);
 if (!folio_test_uptodate(folio))
  block_read_full_folio(folio, args->get_block);
 else
  folio_unlock(folio);
 goto out;
}

/**
 * mpage_readahead - start reads against pages
 * @rac: Describes which pages to read.
 * @get_block: The filesystem's block mapper function.
 *
 * This function walks the pages and the blocks within each page, building and
 * emitting large BIOs.
 *
 * If anything unusual happens, such as:
 *
 * - encountering a page which has buffers
 * - encountering a page which has a non-hole after a hole
 * - encountering a page with non-contiguous blocks
 *
 * then this code just gives up and calls the buffer_head-based read function.
 * It does handle a page which has holes at the end - that is a common case:
 * the end-of-file on blocksize < PAGE_SIZE setups.
 *
 * BH_Boundary explanation:
 *
 * There is a problem.  The mpage read code assembles several pages, gets all
 * their disk mappings, and then submits them all.  That's fine, but obtaining
 * the disk mappings may require I/O.  Reads of indirect blocks, for example.
 *
 * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
 * submitted in the following order:
 *
 *  12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
 *
 * because the indirect block has to be read to get the mappings of blocks
 * 13,14,15,16.  Obviously, this impacts performance.
 *
 * So what we do it to allow the filesystem's get_block() function to set
 * BH_Boundary when it maps block 11.  BH_Boundary says: mapping of the block
 * after this one will require I/O against a block which is probably close to
 * this one.  So you should push what I/O you have currently accumulated.
 *
 * This all causes the disk requests to be issued in the correct order.
 */
void mpage_readahead(struct readahead_control *rac, get_block_t get_block)
{
 struct folio *folio;
 struct mpage_readpage_args args = {
  .get_block = get_block,
  .is_readahead = true,
 };

 while ((folio = readahead_folio(rac))) {
  prefetchw(&folio->flags);
  args.folio = folio;
  args.nr_pages = readahead_count(rac);
  args.bio = do_mpage_readpage(&args);
 }
 if (args.bio)
  mpage_bio_submit_read(args.bio);
}
EXPORT_SYMBOL(mpage_readahead);

/*
 * This isn't called much at all
 */
int mpage_read_folio(struct folio *folio, get_block_t get_block)
{
 struct mpage_readpage_args args = {
  .folio = folio,
  .nr_pages = folio_nr_pages(folio),
  .get_block = get_block,
 };

 args.bio = do_mpage_readpage(&args);
 if (args.bio)
  mpage_bio_submit_read(args.bio);
 return 0;
}
EXPORT_SYMBOL(mpage_read_folio);

/*
 * Writing is not so simple.
 *
 * If the page has buffers then they will be used for obtaining the disk
 * mapping.  We only support pages which are fully mapped-and-dirty, with a
 * special case for pages which are unmapped at the end: end-of-file.
 *
 * If the page has no buffers (preferred) then the page is mapped here.
 *
 * If all blocks are found to be contiguous then the page can go into the
 * BIO.  Otherwise fall back to the mapping's writepage().
 * 
 * FIXME: This code wants an estimate of how many pages are still to be
 * written, so it can intelligently allocate a suitably-sized BIO.  For now,
 * just allocate full-size (16-page) BIOs.
 */

struct mpage_data {
 struct bio *bio;
 sector_t last_block_in_bio;
 get_block_t *get_block;
};

/*
 * We have our BIO, so we can now mark the buffers clean.  Make
 * sure to only clean buffers which we know we'll be writing.
 */
static void clean_buffers(struct folio *folio, unsigned first_unmapped)
{
 unsigned buffer_counter = 0;
 struct buffer_head *bh, *head = folio_buffers(folio);

 if (!head)
  return;
 bh = head;

 do {
  if (buffer_counter++ == first_unmapped)
   break;
  clear_buffer_dirty(bh);
  bh = bh->b_this_page;
 } while (bh != head);

 /*
  * we cannot drop the bh if the page is not uptodate or a concurrent
  * read_folio would fail to serialize with the bh and it would read from
  * disk before we reach the platter.
  */
 if (buffer_heads_over_limit && folio_test_uptodate(folio))
  try_to_free_buffers(folio);
}

static int mpage_write_folio(struct writeback_control *wbc, struct folio *folio,
  struct mpage_data *mpd)
{
 struct bio *bio = mpd->bio;
 struct address_space *mapping = folio->mapping;
 struct inode *inode = mapping->host;
 const unsigned blkbits = inode->i_blkbits;
 const unsigned blocks_per_folio = folio_size(folio) >> blkbits;
 sector_t last_block;
 sector_t block_in_file;
 sector_t first_block;
 unsigned page_block;
 unsigned first_unmapped = blocks_per_folio;
 struct block_device *bdev = NULL;
 int boundary = 0;
 sector_t boundary_block = 0;
 struct block_device *boundary_bdev = NULL;
 size_t length;
 struct buffer_head map_bh;
 loff_t i_size = i_size_read(inode);
 int ret = 0;
 struct buffer_head *head = folio_buffers(folio);

 if (head) {
  struct buffer_head *bh = head;

  /* If they're all mapped and dirty, do it */
  page_block = 0;
  do {
   BUG_ON(buffer_locked(bh));
   if (!buffer_mapped(bh)) {
    /*
     * unmapped dirty buffers are created by
     * block_dirty_folio -> mmapped data
     */
    if (buffer_dirty(bh))
     goto confused;
    if (first_unmapped == blocks_per_folio)
     first_unmapped = page_block;
    continue;
   }

   if (first_unmapped != blocks_per_folio)
    goto confused; /* hole -> non-hole */

   if (!buffer_dirty(bh) || !buffer_uptodate(bh))
    goto confused;
   if (page_block) {
    if (bh->b_blocknr != first_block + page_block)
     goto confused;
   } else {
    first_block = bh->b_blocknr;
   }
   page_block++;
   boundary = buffer_boundary(bh);
   if (boundary) {
    boundary_block = bh->b_blocknr;
    boundary_bdev = bh->b_bdev;
   }
   bdev = bh->b_bdev;
  } while ((bh = bh->b_this_page) != head);

  if (first_unmapped)
   goto page_is_mapped;

  /*
   * Page has buffers, but they are all unmapped. The page was
   * created by pagein or read over a hole which was handled by
   * block_read_full_folio().  If this address_space is also
   * using mpage_readahead then this can rarely happen.
   */
  goto confused;
 }

 /*
  * The page has no buffers: map it to disk
  */
 BUG_ON(!folio_test_uptodate(folio));
 block_in_file = folio_pos(folio) >> blkbits;
 /*
  * Whole page beyond EOF? Skip allocating blocks to avoid leaking
  * space.
  */
 if (block_in_file >= (i_size + (1 << blkbits) - 1) >> blkbits)
  goto page_is_mapped;
 last_block = (i_size - 1) >> blkbits;
 map_bh.b_folio = folio;
 for (page_block = 0; page_block < blocks_per_folio; ) {

  map_bh.b_state = 0;
  map_bh.b_size = 1 << blkbits;
  if (mpd->get_block(inode, block_in_file, &map_bh, 1))
   goto confused;
  if (!buffer_mapped(&map_bh))
   goto confused;
  if (buffer_new(&map_bh))
   clean_bdev_bh_alias(&map_bh);
  if (buffer_boundary(&map_bh)) {
   boundary_block = map_bh.b_blocknr;
   boundary_bdev = map_bh.b_bdev;
  }
  if (page_block) {
   if (map_bh.b_blocknr != first_block + page_block)
    goto confused;
  } else {
   first_block = map_bh.b_blocknr;
  }
  page_block++;
  boundary = buffer_boundary(&map_bh);
  bdev = map_bh.b_bdev;
  if (block_in_file == last_block)
   break;
  block_in_file++;
 }
 BUG_ON(page_block == 0);

 first_unmapped = page_block;

page_is_mapped:
 /* Don't bother writing beyond EOF, truncate will discard the folio */
 if (folio_pos(folio) >= i_size)
  goto confused;
 length = folio_size(folio);
 if (folio_pos(folio) + length > i_size) {
  /*
   * The page straddles i_size.  It must be zeroed out on each
   * and every writepage invocation because it may be mmapped.
   * "A file is mapped in multiples of the page size.  For a file
   * that is not a multiple of the page size, the remaining memory
   * is zeroed when mapped, and writes to that region are not
   * written out to the file."
   */
  length = i_size - folio_pos(folio);
  folio_zero_segment(folio, length, folio_size(folio));
 }

 /*
  * This page will go to BIO.  Do we need to send this BIO off first?
  */
 if (bio && mpd->last_block_in_bio != first_block - 1)
  bio = mpage_bio_submit_write(bio);

alloc_new:
 if (bio == NULL) {
  bio = bio_alloc(bdev, BIO_MAX_VECS,
    REQ_OP_WRITE | wbc_to_write_flags(wbc),
    GFP_NOFS);
  bio->bi_iter.bi_sector = first_block << (blkbits - 9);
  wbc_init_bio(wbc, bio);
  bio->bi_write_hint = inode->i_write_hint;
 }

 /*
  * Must try to add the page before marking the buffer clean or
  * the confused fail path above (OOM) will be very confused when
  * it finds all bh marked clean (i.e. it will not write anything)
  */
 wbc_account_cgroup_owner(wbc, folio, folio_size(folio));
 length = first_unmapped << blkbits;
 if (!bio_add_folio(bio, folio, length, 0)) {
  bio = mpage_bio_submit_write(bio);
  goto alloc_new;
 }

 clean_buffers(folio, first_unmapped);

 BUG_ON(folio_test_writeback(folio));
 folio_start_writeback(folio);
 folio_unlock(folio);
 if (boundary || (first_unmapped != blocks_per_folio)) {
  bio = mpage_bio_submit_write(bio);
  if (boundary_block) {
   write_boundary_block(boundary_bdev,
     boundary_block, 1 << blkbits);
  }
 } else {
  mpd->last_block_in_bio = first_block + blocks_per_folio - 1;
 }
 goto out;

confused:
 if (bio)
  bio = mpage_bio_submit_write(bio);

 /*
  * The caller has a ref on the inode, so *mapping is stable
  */
 ret = block_write_full_folio(folio, wbc, mpd->get_block);
 mapping_set_error(mapping, ret);
out:
 mpd->bio = bio;
 return ret;
}

/**
 * mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them
 * @mapping: address space structure to write
 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
 * @get_block: the filesystem's block mapper function.
 *
 * This is a library function, which implements the writepages()
 * address_space_operation.
 */
int
mpage_writepages(struct address_space *mapping,
  struct writeback_control *wbc, get_block_t get_block)
{
 struct mpage_data mpd = {
  .get_block = get_block,
 };
 struct folio *folio = NULL;
 struct blk_plug plug;
 int error;

 blk_start_plug(&plug);
 while ((folio = writeback_iter(mapping, wbc, folio, &error)))
  error = mpage_write_folio(wbc, folio, &mpd);
 if (mpd.bio)
  mpage_bio_submit_write(mpd.bio);
 blk_finish_plug(&plug);
 return error;
}
EXPORT_SYMBOL(mpage_writepages);

[ Seitenstruktur0.50Drucken  ]