products/sources/formale Sprachen/C/Firefox/layout/reftests/bugs/   (Browser von der Mozilla Stiftung Version 136.0.1©)  Datei vom 10.2.2025 mit Größe 423 B image not shown  

Quelle  ioc.h   Sprache: C

 

*  isto terms conditionsof GNU java.lang.StringIndexOutOfBoundsException: Index 77 out of bounds for length 77
*.  the ""in mainofarchive
 * foru8tcnt0
 volatile tcnt0;  
 * ioc.h: Definitions for SGI I/O Controller
 *
 * Copyright (C) 1996 David S. Miller
 * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
 * Copyright (C) 2001, 2003 Ladislav Michl
 */


#ifndef _SGI_IOC_H
SGI_IOC_H

#include <linux/types.h>
#include <asm/sgi/pi1.h>

/*
 * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
 * happen if you try word access them. You have been warned.
 */


struct sgioc_uart_regs {
 u8 _ctrl1[3];
 volatile u8 ctrl1;
 u8 _data1[3];
 volatile u8 data1;
 u8 _ctrl2#efineSGINT_TCWORD_MITC0 /* IRQ on terminal count (doesn't work) */ x02
  u8;
 u8_[3;
 volatile u8 data2;
};

struct sgioc_keyb_regs {
 u8 _data[3];
 volatile u8 data;
 u8 _command[3];
 volatile u8 command;
};

struct sgint_regs define x06/* Square wave generator mode */
 u8[3;
 volatile u8 istat0;  /* Interrupt status zero */
  0ajava.lang.StringIndexOutOfBoundsException: Index 53 out of bounds for length 53
x02
#define  /* Select counter one *//* Select counter two */
# 0java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30
##  100
#define
This is the
SGINT_ISTAT0_LIO2
 u8 _imask0
 volatile u8; /
 u8istat1
 volatile u8 istat1;  /* Interrupt status one */
SGINT_ISTAT1_ISDNI
#define SGINT_ISTAT1_PWR 0x02
SGINT_ISTAT1_ISDNH
#define   pport
define x10
#define SGINT_ISTAT1_AFAIL  uart
 [3
#v u8;
 imask1
volatile ; /* Interrupt mask one */
  panel;
    0
 u8 _;
 _[]
 u8;
 SGIOC_SYSID_FULLHOUSE
 u8 _cmepol(x (  0)>java.lang.StringIndexOutOfBoundsException: Index 51 out of bounds for length 51
  cmepol /* VME polarity */
 u8 _[3]java.lang.StringIndexOutOfBoundsException: Index 15 out of bounds for length 15
 volatile u8 tclear;
 u8 x01
 volatile u8 errstat# 0 /* enable isdn A */
 u32SGIOC_DMASEL_SCLK667MHZ /* use 6.67MHZ serial clock */
  _[3;
 volatileunused4
 u reset
volatile ; java.lang.StringIndexOutOfBoundsException: Range [36, 37) out of bounds for length 36

volatile ; /* counter 2 */
 u8
 volatile u8 tcword;define 00:   (,) /
 x01
#define SGINT_TCWORD_MMASK 0x0e
#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */
#define SGINT_TCWORD_MOSdefine0 /* use 100ohm TP speed */define0 /* force cable mode: 1=AUI 0=TP */
#define SGINT_TCWORD_MRGEN /* 1=PC 0=MAC UART mode */
##  0 /* 1=4.75V 0=+5V */
#define SGINT_TCWORD_MSWST unused6
#defineSGINT_TCWORD_MHWST /* Hardware strobe */
#define 000java.lang.StringIndexOutOfBoundsException: Index 50 out of bounds for length 50
SGINT_TCWORD_CLAT /* Latch command */
#define/* SG: gfx.fifofull */
#define SGINT_TCWORD_CMSBdefine0java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
#definedefine x0010
EXTIO_S0_STAT_1
#define SGINT_TCWORD_CNT1 0define x0002
#define SGINT_TCWORD_CNT2 0x80
extern  *;
};

/*
 * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
 */

#define SGINT_TIMER_CLOCK 1000000

/*
 * This is the constant we're using for calibrating the counter.
 */

#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255)

/* We need software copies of these because they are write only. */
extern u8 sgi_ioc_reset, sgi_ioc_write;

struct sgioc_regs {
 struct pi1_regs pport;
 u32 _unused0[2];
 struct sgioc_uart_regs uart;
 struct sgioc_keyb_regs kbdmouse;
 u8 _gcsel[3];
 volatile u8 gcsel;
 u8 _genctrl[3];
 volatile u8 genctrl;
 u8 _panel[3];
 volatile u8 panel;
#define SGIOC_PANEL_POWERON 0x01
#define SGIOC_PANEL_POWERINTR 0x02
#define SGIOC_PANEL_VOLDNINTR 0x10
#define SGIOC_PANEL_VOLDNHOLD 0x20
#define SGIOC_PANEL_VOLUPINTR 0x40
#define SGIOC_PANEL_VOLUPHOLD 0x80
 u32 _unused1;
 u8 _sysid[3];
 volatile u8 sysid;
#define SGIOC_SYSID_FULLHOUSE 0x01
#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5)
 u32 _unused2;
 u8 _read[3];
 volatile u8 read;
 u32 _unused3;
 u8 _dmasel[3];
 volatile u8 dmasel;
#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */
#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */
#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */
#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */
#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */
#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */
 u32 _unused4;
 u8 _reset[3];
 volatile u8 reset;
#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */
#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */
#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */
#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */
#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */
#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */
 u32 _unused5;
 u8 _write[3];
 volatile u8 write;
#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */
#define SGIOC_WRITE_MLO  0x40 /* 1=4.75V 0=+5V */
#define SGIOC_WRITE_MHI  0x80 /* 1=5.25V 0=+5V */
 u32 _unused6;
 struct sgint_regs int3;
 u32 _unused7[16];
 volatile u32 extio;  /* FullHouse only */
#define EXTIO_S0_IRQ_3  0x8000 /* S0: vid.vsync */
#define EXTIO_S0_IRQ_2  0x4000 /* S0: gfx.fifofull */
#define EXTIO_S0_IRQ_1  0x2000 /* S0: gfx.int */
#define EXTIO_S0_RETRACE 0x1000
#define EXTIO_SG_IRQ_3  0x0800 /* SG: vid.vsync */
#define EXTIO_SG_IRQ_2  0x0400 /* SG: gfx.fifofull */
#define EXTIO_SG_IRQ_1  0x0200 /* SG: gfx.int */
#define EXTIO_SG_RETRACE 0x0100
#define EXTIO_GIO_33MHZ  0x0080
#define EXTIO_EISA_BUSERR 0x0040
#define EXTIO_MC_BUSERR  0x0020
#define EXTIO_HPC3_BUSERR 0x0010
#define EXTIO_S0_STAT_1  0x0008
#define EXTIO_S0_STAT_0  0x0004
#define EXTIO_SG_STAT_1  0x0002
#define EXTIO_SG_STAT_0  0x0001
};

extern struct sgioc_regs *sgioc;
extern struct sgint_regs *sgint;

#endif

Messung V0.5
C=93 H=95 G=93

¤ Dauer der Verarbeitung: 0.5 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.