Quelle  editundo.cxx   Sprache: C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <memory>
#include "impedit.hxx"
#include "editundo.hxx"
#include <editeng/editview.hxx>
#include <editeng/editeng.hxx>
#include <utility>
#include <osl/diagnose.h>


static void lcl_DoSetSelection( EditView const * pView, sal_uInt16 nPara )
{
    EPaM aEPaM( nPara, 0 );
    EditPaM aPaM = pView->getImpEditEngine().CreateEditPaM(aEPaM);
    aPaM.SetIndex( aPaM.GetNode()->Len() );
    EditSelection aSel( aPaM, aPaM );
    pView->getImpl().SetEditSelection( aSel );
}

EditUndoManager::EditUndoManager(sal_uInt16 nMaxUndoActionCount )
:   SfxUndoManager(nMaxUndoActionCount),
    mpEditEngine(nullptr)
{
}

void EditUndoManager::SetEditEngine(EditEngine* pNew)
{
    mpEditEngine = pNew;
}

bool EditUndoManager::Undo()
{
    if ( !mpEditEngine || GetUndoActionCount() == 0 )
        return false;

    DBG_ASSERT( mpEditEngine->GetActiveView(), "Active View?" );

    if ( !mpEditEngine->GetActiveView() )
    {
        if (!mpEditEngine->GetEditViews().empty())
            mpEditEngine->SetActiveView(mpEditEngine->GetEditViews()[0]);
        else
        {
            OSL_FAIL("Undo in engine is not possible without a View! ");
            return false;
        }
    }

    mpEditEngine->GetActiveView()->getImpl().DrawSelectionXOR(); // Remove the old selection

    mpEditEngine->SetUndoMode( true );
    bool bDone = SfxUndoManager::Undo();
    mpEditEngine->SetUndoMode( false );

    EditSelection aNewSel( mpEditEngine->GetActiveView()->getImpl().GetEditSelection() );
    DBG_ASSERT( !aNewSel.IsInvalid(), "Invalid selection after Undo () ");
    DBG_ASSERT( !aNewSel.DbgIsBuggy( mpEditEngine->GetEditDoc() ), "Broken selection after Undo () ");

    aNewSel.Min() = aNewSel.Max();
    mpEditEngine->GetActiveView()->getImpl().SetEditSelection( aNewSel );
    if (mpEditEngine->IsUpdateLayout())
        mpEditEngine->FormatAndLayout( mpEditEngine->GetActiveView(), true );

    return bDone;
}

bool EditUndoManager::Redo()
{
    if ( !mpEditEngine || GetRedoActionCount() == 0 )
        return false;

    DBG_ASSERT( mpEditEngine->GetActiveView(), "Active View?" );

    if ( !mpEditEngine->GetActiveView() )
    {
        if (!mpEditEngine->GetEditViews().empty())
            mpEditEngine->SetActiveView(mpEditEngine->GetEditViews()[0]);
        else
        {
            OSL_FAIL( "Redo in Engine without View not possible!" );
            return false;
        }
    }

    mpEditEngine->GetActiveView()->getImpl().DrawSelectionXOR(); // Remove the old selection

    mpEditEngine->SetUndoMode( true );
    bool bDone = SfxUndoManager::Redo();
    mpEditEngine->SetUndoMode( false );

    EditSelection aNewSel( mpEditEngine->GetActiveView()->getImpl().GetEditSelection() );
    DBG_ASSERT( !aNewSel.IsInvalid(), "Invalid selection after Undo () ");
    DBG_ASSERT( !aNewSel.DbgIsBuggy( mpEditEngine->GetEditDoc() ), "Broken selection after Undo () ");

    aNewSel.Min() = aNewSel.Max();
    mpEditEngine->GetActiveView()->getImpl().SetEditSelection( aNewSel );
    if (mpEditEngine->IsUpdateLayout())
        mpEditEngine->FormatAndLayout( mpEditEngine->GetActiveView() );

    return bDone;
}

EditUndo::EditUndo(sal_uInt16 nI, EditEngine* pEE) :
    nId(nI), mnViewShellId(-1), mpEditEngine(pEE)
{
    const EditView* pEditView = mpEditEngine ? mpEditEngine->GetActiveView() : nullptr;
    const OutlinerViewShell* pViewShell = pEditView ? pEditView->getImpl().GetViewShell() : nullptr;
    if (pViewShell)
        mnViewShellId = pViewShell->GetViewShellId();
}

EditUndo::~EditUndo()
{
}


sal_uInt16 EditUndo::GetId() const
{
    return nId;
}

bool EditUndo::CanRepeat(SfxRepeatTarget&) const
{
    return false;
}

OUString EditUndo::GetComment() const
{
    OUString aComment;

    if (mpEditEngine)
        aComment = mpEditEngine->GetUndoComment( GetId() );

    return aComment;
}

ViewShellId EditUndo::GetViewShellId() const
{
    return mnViewShellId;
}

EditUndoDelContent::EditUndoDelContent(EditEngine* pEE, std::unique_ptr<ContentNode> pNode, sal_Int32 nPortion)
    : EditUndo(EDITUNDO_DELCONTENT, pEE)
    , nNode(nPortion)
    , mpContentNode(std::move(pNode))
{}

EditUndoDelContent::~EditUndoDelContent()
{
}

void EditUndoDelContent::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    ContentNode* pNode = mpContentNode.get();
    GetEditEngine()->InsertContent(std::move(mpContentNode), nNode);
    EditSelection aSel(EditPaM(pNode, 0), EditPaM(pNode, pNode->Len()));
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(aSel);
}

void EditUndoDelContent::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );

    EditEngine* pEE = GetEditEngine();

    // pNode is no longer correct, if the paragraphs where merged
    // in between Undos
    ContentNode* pNode = pEE->GetEditDoc().GetObject(nNode);
    DBG_ASSERT(pNode, "EditUndoDelContent::Redo(): Node?!");

    pEE->RemoveParaPortion(nNode);

    // Do not delete node, depends on the undo!
    mpContentNode = pEE->GetEditDoc().Release(nNode);
    assert(mpContentNode.get() == pNode);

    if (pEE->IsCallParaInsertedOrDeleted())
        pEE->ParagraphDeleted(nNode);

    DeletedNodeInfo* pDeletedNodeInfo = new DeletedNodeInfo(pNode, nNode);
    pEE->AppendDeletedNodeInfo(pDeletedNodeInfo);
    pEE->UpdateSelections();

    ContentNode* pCheckNode = (nNode < pEE->GetEditDoc().Count())
        ? pEE->GetEditDoc().GetObject(nNode)
        : pEE->GetEditDoc().GetObject(nNode - 1);

    assert(pCheckNode);

    DBG_ASSERT(pCheckNode != mpContentNode.get(), "?! RemoveContent !? ");

    EditPaM aPaM(pCheckNode, pCheckNode->Len());

    pEE->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aPaM ) );
}

EditUndoConnectParas::EditUndoConnectParas(
    EditEngine* pEE, sal_Int32 nN, sal_uInt16 nSP,
    SfxItemSet _aLeftParaAttribs, SfxItemSet _aRightParaAttribs,
    const SfxStyleSheet* pLeftStyle, const SfxStyleSheet* pRightStyle, bool bBkwrd) :
    EditUndo(EDITUNDO_CONNECTPARAS, pEE),
    nNode(nN),
    nSepPos(nSP),
    aLeftParaAttribs(std::move(_aLeftParaAttribs)),
    aRightParaAttribs(std::move(_aRightParaAttribs)),
    eLeftStyleFamily(SfxStyleFamily::All),
    eRightStyleFamily(SfxStyleFamily::All),
    bBackward(bBkwrd)
{
    if ( pLeftStyle )
    {
        aLeftStyleName = pLeftStyle->GetName();
        eLeftStyleFamily = pLeftStyle->GetFamily();
    }
    if ( pRightStyle )
    {
        aRightStyleName = pRightStyle->GetName();
        eRightStyleFamily = pRightStyle->GetFamily();
    }
}

EditUndoConnectParas::~EditUndoConnectParas()
{
}

void EditUndoConnectParas::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );

    // For SplitContent ParagraphInserted can not be called yet because the
    // Outliner relies on the attributes to initialize the depth

    bool bCall = GetEditEngine()->IsCallParaInsertedOrDeleted();
    GetEditEngine()->SetCallParaInsertedOrDeleted(false);

    EditPaM aPaM = GetEditEngine()->SplitContent(nNode, nSepPos);

    GetEditEngine()->SetCallParaInsertedOrDeleted( bCall );
    if (GetEditEngine()->IsCallParaInsertedOrDeleted())
    {
        GetEditEngine()->ParagraphInserted( nNode+1 );
        GetEditEngine()->SetParaAttribs( nNode+1, aRightParaAttribs );
    }

    // Calling SetParaAttribs is effective only after ParagraphInserted
    GetEditEngine()->SetParaAttribs( nNode, aLeftParaAttribs );

    if (GetEditEngine()->GetStyleSheetPool())
    {
        if ( !aLeftStyleName.isEmpty() )
            GetEditEngine()->SetStyleSheet( nNode, static_cast<SfxStyleSheet*>(GetEditEngine()->GetStyleSheetPool()->Find( aLeftStyleName, eLeftStyleFamily )) );
        if ( !aRightStyleName.isEmpty() )
            GetEditEngine()->SetStyleSheet( nNode+1, static_cast<SfxStyleSheet*>(GetEditEngine()->GetStyleSheetPool()->Find( aRightStyleName, eRightStyleFamily )) );
    }

    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aPaM ) );
}

void EditUndoConnectParas::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: Np Active View!" );
    EditPaM aPaM = GetEditEngine()->ConnectContents( nNode, bBackward );

    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aPaM ) );
}

EditUndoSplitPara::EditUndoSplitPara(
    EditEngine* pEE, sal_Int32 nN, sal_uInt16 nSP) :
    EditUndo(EDITUNDO_SPLITPARA, pEE),
    nNode(nN), nSepPos(nSP) {}

EditUndoSplitPara::~EditUndoSplitPara() {}

void EditUndoSplitPara::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->ConnectContents(nNode, false);
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aPaM ) );
}

void EditUndoSplitPara::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->SplitContent(nNode, nSepPos);
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aPaM ) );
}

EditUndoInsertChars::EditUndoInsertChars(
    EditEngine* pEE, const EPaM& rEPaM, OUString aStr) :
    EditUndo(EDITUNDO_INSERTCHARS, pEE),
    aEPaM(rEPaM),
    aText(std::move(aStr)) {}

void EditUndoInsertChars::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    EditSelection aSel( aPaM, aPaM );
    aSel.Max().SetIndex( aSel.Max().GetIndex() + aText.getLength() );
    EditPaM aNewPaM( GetEditEngine()->DeleteSelection(aSel) );
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aNewPaM, aNewPaM ) );
}

void EditUndoInsertChars::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    GetEditEngine()->InsertText(EditSelection(aPaM, aPaM), aText);
    EditPaM aNewPaM( aPaM );
    aNewPaM.SetIndex( aNewPaM.GetIndex() + aText.getLength() );
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( EditSelection( aPaM, aNewPaM ) );
}

bool EditUndoInsertChars::Merge( SfxUndoAction* pNextAction )
{
    EditUndoInsertChars* pNext = dynamic_cast<EditUndoInsertChars*>(pNextAction);
    if (!pNext)
        return false;

    if ( aEPaM.nPara != pNext->aEPaM.nPara )
        return false;

    if ( ( aEPaM.nIndex + aText.getLength() ) == pNext->aEPaM.nIndex )
    {
        aText += pNext->aText;
        return true;
    }
    return false;
}

EditUndoRemoveChars::EditUndoRemoveChars(
    EditEngine* pEE, const EPaM& rEPaM, OUString aStr) :
    EditUndo(EDITUNDO_REMOVECHARS, pEE),
    aEPaM(rEPaM), aText(std::move(aStr)) {}

void EditUndoRemoveChars::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    EditSelection aSel( aPaM, aPaM );
    GetEditEngine()->InsertText(aSel, aText);
    aSel.Max().SetIndex( aSel.Max().GetIndex() + aText.getLength() );
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(aSel);
}

void EditUndoRemoveChars::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    EditSelection aSel( aPaM, aPaM );
    aSel.Max().SetIndex( aSel.Max().GetIndex() + aText.getLength() );
    EditPaM aNewPaM = GetEditEngine()->DeleteSelection(aSel);
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(aNewPaM);
}

EditUndoInsertFeature::EditUndoInsertFeature(
    EditEngine* pEE, const EPaM& rEPaM, const SfxPoolItem& rFeature) :
    EditUndo(EDITUNDO_INSERTFEATURE, pEE),
    aEPaM(rEPaM),
    pFeature(rFeature.Clone())
{
    DBG_ASSERT( pFeature, "Feature could not be duplicated: EditUndoInsertFeature" );
}

EditUndoInsertFeature::~EditUndoInsertFeature()
{
}

void EditUndoInsertFeature::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    EditSelection aSel( aPaM, aPaM );
    // Attributes are then corrected implicitly by the document ...
    aSel.Max().SetIndex( aSel.Max().GetIndex()+1 );
    GetEditEngine()->DeleteSelection(aSel);
    aSel.Max().SetIndex( aSel.Max().GetIndex()-1 ); // For Selection
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(aSel);
}

void EditUndoInsertFeature::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditPaM aPaM = GetEditEngine()->CreateEditPaM(aEPaM);
    EditSelection aSel( aPaM, aPaM );
    GetEditEngine()->InsertFeature(aSel, *pFeature);
    if ( pFeature->Which() == EE_FEATURE_FIELD )
        GetEditEngine()->UpdateFieldsOnly();
    aSel.Max().SetIndex( aSel.Max().GetIndex()+1 );
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(aSel);
}

EditUndoMoveParagraphs::EditUndoMoveParagraphs(
    EditEngine* pEE, const Range& rParas, sal_Int32 n) :
    EditUndo(EDITUNDO_MOVEPARAGRAPHS, pEE), nParagraphs(rParas), nDest(n) {}

EditUndoMoveParagraphs::~EditUndoMoveParagraphs() {}

void EditUndoMoveParagraphs::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    Range aTmpRange( nParagraphs );
    tools::Long nTmpDest = aTmpRange.Min();

    tools::Long nDiff = nDest - aTmpRange.Min();
    aTmpRange.Min() += nDiff;
    aTmpRange.Max() += nDiff;

    if ( nParagraphs.Min() < static_cast<tools::Long>(nDest) )
    {
        tools::Long nLen = aTmpRange.Len();
        aTmpRange.Min() -= nLen;
        aTmpRange.Max() -= nLen;
    }
    else
        nTmpDest += aTmpRange.Len();

    EditSelection aNewSel = GetEditEngine()->MoveParagraphs(aTmpRange, nTmpDest);
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( aNewSel );
}

void EditUndoMoveParagraphs::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditSelection aNewSel = GetEditEngine()->MoveParagraphs(nParagraphs, nDest);
    GetEditEngine()->GetActiveView()->getImpl().SetEditSelection( aNewSel );
}

EditUndoSetStyleSheet::EditUndoSetStyleSheet(
    EditEngine* pEE, sal_Int32 nP, OUString _aPrevName, SfxStyleFamily ePrevFam,
    OUString _aNewName, SfxStyleFamily eNewFam, SfxItemSet _aPrevParaAttribs) :
    EditUndo(EDITUNDO_STYLESHEET, pEE),
    nPara(nP),
    aPrevName(std::move(_aPrevName)),
    aNewName(std::move(_aNewName)),
    ePrevFamily(ePrevFam),
    eNewFamily(eNewFam),
    aPrevParaAttribs(std::move(_aPrevParaAttribs))
{
}

EditUndoSetStyleSheet::~EditUndoSetStyleSheet()
{
}

void EditUndoSetStyleSheet::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    GetEditEngine()->SetStyleSheet( nPara, static_cast<SfxStyleSheet*>(GetEditEngine()->GetStyleSheetPool()->Find( aPrevName, ePrevFamily )) );
    GetEditEngine()->SetParaAttribsOnly( nPara, aPrevParaAttribs );
    lcl_DoSetSelection( GetEditEngine()->GetActiveView(), nPara );
}

void EditUndoSetStyleSheet::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    GetEditEngine()->SetStyleSheet( nPara, static_cast<SfxStyleSheet*>(GetEditEngine()->GetStyleSheetPool()->Find( aNewName, eNewFamily )) );
    lcl_DoSetSelection( GetEditEngine()->GetActiveView(), nPara );
}

EditUndoSetParaAttribs::EditUndoSetParaAttribs(
    EditEngine* pEE, sal_Int32 nP, SfxItemSet _aPrevItems, SfxItemSet _aNewItems) :
    EditUndo(EDITUNDO_PARAATTRIBS, pEE),
    nPara(nP),
    aPrevItems(std::move(_aPrevItems)),
    aNewItems(std::move(_aNewItems)) {}

EditUndoSetParaAttribs::~EditUndoSetParaAttribs() {}

void EditUndoSetParaAttribs::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    GetEditEngine()->SetParaAttribsOnly( nPara, aPrevItems );
    lcl_DoSetSelection( GetEditEngine()->GetActiveView(), nPara );
}

void EditUndoSetParaAttribs::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    GetEditEngine()->SetParaAttribsOnly( nPara, aNewItems );
    lcl_DoSetSelection( GetEditEngine()->GetActiveView(), nPara );
}

EditUndoSetAttribs::EditUndoSetAttribs(EditEngine* pEE, const ESelection& rESel, SfxItemSet aNewItems) :
    EditUndo(EDITUNDO_ATTRIBS, pEE),
    aESel(rESel),
    aNewAttribs(std::move(aNewItems)),
    nSpecial(SetAttribsMode::NONE),
    m_bSetSelection(true),
    // When EditUndoSetAttribs actually is a RemoveAttribs this could be
    // recognize by the empty itemset, but then it would have to be caught in
    // its own place, which possible a setAttribs does with an empty itemset.
    bSetIsRemove(false),
    bRemoveParaAttribs(false),
    nRemoveWhich(0)
{
}

EditUndoSetAttribs::~EditUndoSetAttribs()
{
}

void EditUndoSetAttribs::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditEngine* pEE = GetEditEngine();
    bool bFields = false;
    for ( sal_Int32 nPara = aESel.start.nPara; nPara <= aESel.end.nPara; nPara++ )
    {
        const ContentAttribsInfo& rInf = *aPrevAttribs[nPara-aESel.start.nPara];

        // first the paragraph attributes ...
        pEE->SetParaAttribsOnly(nPara, rInf.GetPrevParaAttribs());

        // Then the character attributes ...
        // Remove all attributes including features, are later re-established.
        pEE->RemoveCharAttribs(nPara, 0, true);
        DBG_ASSERT( pEE->GetEditDoc().GetObject( nPara ), "Undo (SetAttribs): pNode = NULL!" );
        ContentNode* pNode = pEE->GetEditDoc().GetObject( nPara );
        for (const auto & nAttr : rInf.GetPrevCharAttribs())
        {
            const EditCharAttrib& rX = *nAttr;
            // is automatically "poolsized"
            pEE->GetEditDoc().InsertAttrib(pNode, rX.GetStart(), rX.GetEnd(), *rX.GetItem());
            if (rX.Which() == EE_FEATURE_FIELD)
                bFields = true;
        }
    }
    if ( bFields )
        pEE->UpdateFieldsOnly();
    if (m_bSetSelection)
    {
        ImpSetSelection();
    }
}

void EditUndoSetAttribs::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditEngine* pEE = GetEditEngine();

    EditSelection aSel = pEE->CreateSelection(aESel);
    if ( !bSetIsRemove )
        pEE->SetAttribs( aSel, aNewAttribs, nSpecial );
    else
        pEE->RemoveCharAttribs( aSel, bRemoveParaAttribs, nRemoveWhich );

    if (m_bSetSelection)
    {
        ImpSetSelection();
    }
}

void EditUndoSetAttribs::AppendContentInfo(ContentAttribsInfo* pNew)
{
    aPrevAttribs.push_back(std::unique_ptr<ContentAttribsInfo>(pNew));
}

void EditUndoSetAttribs::ImpSetSelection()
{
    EditEngine* pEE = GetEditEngine();
    EditSelection aSel = pEE->CreateSelection(aESel);
    pEE->GetActiveView()->getImpl().SetEditSelection(aSel);
}

EditUndoTransliteration::EditUndoTransliteration(EditEngine* pEE, const ESelection&&nbsp;rESel, TransliterationFlags nM) :
    EditUndo(EDITUNDO_TRANSLITERATE, pEE),
    aOldESel(rESel), nMode(nM) {}

EditUndoTransliteration::~EditUndoTransliteration()
{
}

void EditUndoTransliteration::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );

    EditEngine* pEE = GetEditEngine();

    EditSelection aSel = pEE->CreateSelection(aNewESel);

    // Insert text, but don't expand Attribs at the current position:
    aSel = pEE->DeleteSelected( aSel );
    EditSelection aDelSel( aSel );
    aSel = pEE->InsertParaBreak( aSel );
    aDelSel.Max() = aSel.Min();
    aDelSel.Max().GetNode()->GetCharAttribs().DeleteEmptyAttribs();
    EditSelection aNewSel;
    if ( pTxtObj )
    {
        aNewSel = pEE->InsertText( *pTxtObj, aSel );
    }
    else
    {
        aNewSel = pEE->InsertText( aSel, aText );
    }
    if ( aNewSel.Min().GetNode() == aDelSel.Max().GetNode() )
    {
        aNewSel.Min().SetNode( aDelSel.Min().GetNode() );
        aNewSel.Min().SetIndex( aNewSel.Min().GetIndex() + aDelSel.Min().GetIndex() );
    }
    if ( aNewSel.Max().GetNode() == aDelSel.Max().GetNode() )
    {
        aNewSel.Max().SetNode( aDelSel.Min().GetNode() );
        aNewSel.Max().SetIndex( aNewSel.Max().GetIndex() + aDelSel.Min().GetIndex() );
    }
    pEE->DeleteSelected( aDelSel );
    pEE->GetActiveView()->getImpl().SetEditSelection( aNewSel );
}

void EditUndoTransliteration::Redo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    EditEngine* pEE = GetEditEngine();

    EditSelection aSel = pEE->CreateSelection(aOldESel);
    EditSelection aNewSel = pEE->TransliterateText( aSel, nMode );
    pEE->GetActiveView()->getImpl().SetEditSelection( aNewSel );
}

EditUndoMarkSelection::EditUndoMarkSelection(EditEngine* pEE, const ESelection& rSel) :
    EditUndo(EDITUNDO_MARKSELECTION, pEE), aSelection(rSel) {}

EditUndoMarkSelection::~EditUndoMarkSelection() {}

void EditUndoMarkSelection::Undo()
{
    DBG_ASSERT( GetEditEngine()->GetActiveView(), "Undo/Redo: No Active View!" );
    if ( GetEditEngine()->GetActiveView() )
    {
        if ( GetEditEngine()->IsFormatted() )
            GetEditEngine()->GetActiveView()->SetSelection( aSelection );
        else
            GetEditEngine()->GetActiveView()->getImpl().SetEditSelection(GetEditEngine()->CreateSelection(aSelection));
    }
}

void EditUndoMarkSelection::Redo()
{
    // For redo unimportant, because at the beginning of the undo parentheses
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */