| Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/arm/boot/dts/aspeed/ (Open Source Betriebssystem Version 6.17.9©) Datei vom 24.10.2025 mit Größe 32 kB |
|
Quelle aspeed-bmc-facebook-minerva.dts Sprache: unbekannt |
|
|
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2023 Facebook Inc. /dts-v1/; #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/i2c/i2c.h> / { model = "Facebook Minerva CMM"; compatible = "facebook,minerva-cmc", "aspeed,ast2600"; aliases { serial4 = &uart5; serial5 = &uart6; /* * PCA9548 (2-0077) provides 8 channels connecting to * 6 pcs of FCB (Fan Controller Board). */ i2c16 = &imux16; i2c17 = &imux17; i2c18 = &imux18; i2c19 = &imux19; i2c20 = &imux20; i2c21 = &imux21; i2c22 = &imux22; i2c23 = &imux23; i2c24 = &imux24; i2c25 = &imux25; i2c26 = &imux26; i2c27 = &imux27; i2c28 = &imux28; i2c29 = &imux29; i2c30 = &imux30; i2c31 = &imux31; i2c32 = &imux32; i2c33 = &imux33; i2c34 = &imux34; i2c35 = &imux35; i2c36 = &imux36; i2c37 = &imux37; i2c38 = &imux38; i2c39 = &imux39; i2c40 = &imux40; i2c41 = &imux41; i2c42 = &imux42; i2c43 = &imux43; i2c44 = &imux44; i2c45 = &imux45; i2c46 = &imux46; i2c47 = &imux47; spi1 = &spi_gpio; }; chosen { stdout-path = "serial5:57600n8"; }; memory@80000000 { device_type = "memory"; reg = <0x80000000 0x80000000>; }; iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, <&adc1 2>; }; leds { compatible = "gpio-leds"; led-0 { label = "bmc_heartbeat_amber"; gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; led-1 { label = "fp_id_amber"; default-state = "off"; gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; }; led-2 { label = "power_blue"; default-state = "off"; gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; }; led-3 { label = "fan_status_led"; gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-4 { label = "fan_fault_led_n"; gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>; default-state = "off"; }; led-5 { label = "bmc_ready_noled"; gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; }; }; spi_gpio: spi { status = "okay"; compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; tpm@0 { compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; spi-max-frequency = <33000000>; reg = <0>; }; }; }; &uart6 { status = "okay"; }; &wdt1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdtrst1_default>; aspeed,reset-type = "soc"; aspeed,external-signal; aspeed,ext-push-pull; aspeed,ext-active-high; aspeed,ext-pulse-duration = <256>; }; &mac3 { status = "okay"; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii4_default>; fixed-link { speed = <100>; full-duplex; }; }; &mdio3 { status = "okay"; }; &fmc { status = "okay"; flash@0 { status = "okay"; m25p,fast-read; label = "bmc"; spi-max-frequency = <50000000>; #include "openbmc-flash-layout-128.dtsi" }; flash@1 { status = "okay"; m25p,fast-read; label = "alt-bmc"; spi-max-frequency = <50000000>; }; }; &sgpiom0 { status = "okay"; ngpios = <128>; bus-frequency = <2000000>; }; &i2c0 { status = "okay"; power-monitor@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <1000>; }; power-monitor@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <1000>; }; power-monitor@44 { compatible = "lltc,ltc4287"; reg = <0x44>; shunt-resistor-micro-ohms = <2000>; }; power-monitor@43 { compatible = "infineon,xdp710"; reg = <0x43>; }; leds_gpio: gpio@19 { compatible = "nxp,pca9555"; reg = <0x19>; gpio-controller; #gpio-cells = <2>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <238 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "PWRGD_P24V_SMPWROK", "P1V5_PWROK", "P3V3_PWROK", "P5V_PWROK", "P12V_SCM_PWROK", "P12V_PWROK", "P24V_PWROK", "P48V_HSC_PWROK", "ERR_GPIO_IRQ", "TMP75_ALERT_N", "BMC_PWROK", "P12V_INA230_ALERT_N", "P24V_INA230_ALERT_N","", "P48V_HSC_ALERT_N", "P1V05_PWROK"; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <240 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P1V05_PWR_FAIL", "P1V5_PWR_FAIL", "P24V_PWR_FAIL", "P24V_SM_PWR_FAIL", "IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N", "RTC_INT_N_R", "ERR_GPIO_IRQ", "", "", "", "", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <242 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "", "", "", "", "", "", "", "", "RACKMON_A_1", "RACKMON_A_2", "RACKMON_B_1", "RACKMON_B_2", "", "", "", ""; }; }; &i2c1 { status = "okay"; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; temperature-sensor@4f { compatible = "ti,tmp75"; reg = <0x4f>; }; eeprom@54 { compatible = "atmel,24c128"; reg = <0x54>; }; }; &i2c2 { status = "okay"; i2c-mux@77 { compatible = "nxp,pca9548"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; i2c-mux-idle-disconnect; // FCB 1 imux16: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <218 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R", "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R", "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R", "FCB_1_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <218 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N", "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N", "FCB_1_TMP75_ALERT_N", "", "", "", "FAN1_PRSNT", "FAN2_PRSNT", "FAN3_PRSNT", "FAN4_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <218 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT", "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT", "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT", "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <218 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL", "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL", "FAN2_POWER_FAIL", "FAN3_POWER_FAIL", "FAN4_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; // FCB 2 imux17: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <220 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R", "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R", "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R", "FCB_2_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <220 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N", "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N", "FCB_2_TMP75_ALERT_N", "", "", "", "FAN5_PRSNT", "FAN6_PRSNT", "FAN7_PRSNT", "FAN8_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <220 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT", "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT", "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT", "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <220 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL", "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL", "FAN6_POWER_FAIL", "FAN7_POWER_FAIL", "FAN8_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; // FCB 3 imux18: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <230 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R", "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R", "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R", "FCB_3_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <230 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N", "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N", "FCB_3_TMP75_ALERT_N", "", "", "", "FAN9_PRSNT", "FAN10_PRSNT", "FAN11_PRSNT", "FAN12_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <230 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT", "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT", "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT", "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <230 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL", "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL", "FAN10_POWER_FAIL", "FAN11_POWER_FAIL", "FAN12_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; // FCB 4 imux19: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <232 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R", "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R", "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R", "FCB_4_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <232 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N", "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N", "FCB_4_TMP75_ALERT_N", "", "", "", "FAN13_PRSNT", "FAN14_PRSNT", "FAN15_PRSNT", "FAN16_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <232 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT", "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT", "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT", "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <232 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL", "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL", "FAN14_POWER_FAIL", "FAN15_POWER_FAIL", "FAN16_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; // FCB 5 imux20: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <254 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R", "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R", "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R", "FCB_5_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <254 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N", "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N", "FCB_5_TMP75_ALERT_N", "", "", "", "FAN20_PRSNT", "FAN19_PRSNT", "FAN18_PRSNT", "FAN17_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <254 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT", "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT", "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT", "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <254 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL", "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL", "FAN19_POWER_FAIL", "FAN18_POWER_FAIL", "FAN17_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; // FCB 6 imux21: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; pwm@5e{ compatible = "max31790"; reg = <0x5e>; #address-cells = <1>; #size-cells = <0>; }; power-sensor@40 { compatible = "ti,ina238"; reg = <0x40>; shunt-resistor = <1000>; }; power-sensor@41 { compatible = "ti,ina238"; reg = <0x41>; shunt-resistor = <1000>; }; power-sensor@44 { compatible = "ti,ina238"; reg = <0x44>; shunt-resistor = <1000>; }; power-sensor@45 { compatible = "ti,ina238"; reg = <0x45>; shunt-resistor = <1000>; }; temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; gpio@11 { compatible = "nxp,pca9555"; reg = <0x11>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <252 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R", "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R", "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R", "FCB_6_PWRGD_P3V3_R", "", "", "", "", "", "", "", "", ""; }; gpio@12 { compatible = "nxp,pca9555"; reg = <0x12>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <252 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N", "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N", "FCB_6_TMP75_ALERT_N", "", "", "", "FAN24_PRSNT", "FAN23_PRSNT", "FAN22_PRSNT", "FAN21_PRSNT", "", "", "", ""; }; gpio@13 { compatible = "nxp,pca9555"; reg = <0x13>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <252 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT", "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT", "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT", "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT", "", "", "", "", "", "", "", ""; }; gpio@17 { compatible = "nxp,pca9555"; reg = <0x17>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&sgpiom0>; interrupts = <252 IRQ_TYPE_LEVEL_LOW>; gpio-line-names = "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL", "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL", "FAN23_POWER_FAIL", "FAN22_POWER_FAIL", "FAN21_POWER_FAIL", "", "", "", "", "", "", "", "", ""; }; }; imux22: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; }; imux23: i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; }; }; }; &i2c3 { status = "okay"; i2c-mux@72 { compatible = "nxp,pca9545"; reg = <0x72>; #address-cells = <1>; #size-cells = <0>; imux24: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux25: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux26: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux27: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; }; }; &i2c4 { status = "okay"; i2c-mux@72 { compatible = "nxp,pca9545"; reg = <0x72>; #address-cells = <1>; #size-cells = <0>; imux28: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux29: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux30: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux31: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; }; }; &i2c5 { status = "okay"; i2c-mux@72 { compatible = "nxp,pca9545"; reg = <0x72>; #address-cells = <1>; #size-cells = <0>; imux32: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux33: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux34: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux35: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; }; }; &i2c6 { status = "okay"; i2c-mux@72 { compatible = "nxp,pca9545"; reg = <0x72>; #address-cells = <1>; #size-cells = <0>; imux36: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux37: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux38: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux39: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; }; }; &i2c7 { status = "okay"; }; &i2c8 { status = "okay"; }; &i2c9 { status = "okay"; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; &i2c12 { status = "okay"; i2c-mux@70 { compatible = "nxp,pca9545"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; imux40: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux41: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux42: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux43: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; }; }; &i2c13 { status = "okay"; i2c-mux@70 { compatible = "nxp,pca9545"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; imux44: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux45: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux46: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; imux47: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; }; }; &i2c14 { status = "okay"; multi-master; ipmb@10 { compatible = "ipmb-dev"; reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; i2c-protocol; }; }; &i2c15 { status = "okay"; eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; eeprom@56 { compatible = "atmel,24c64"; reg = <0x56>; }; }; &adc0 { aspeed,int-vref-microvolt = <2500000>; status = "okay"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default>; }; &adc1 { aspeed,int-vref-microvolt = <2500000>; status = "okay"; pinctrl-0 = <&pinctrl_adc10_default>; }; &ehci0 { status = "okay"; }; &ehci1 { status = "okay"; }; &uhci { status = "okay"; }; &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", /*B0-B7*/ "","","","","","","","", /*C0-C7*/ "","","","","BLADE_UART_SEL2","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","","","","","","", /*G0-G7*/ "","","","","","","","", /*H0-H7*/ "","","","","","","","", /*I0-I7*/ "","","","","","","","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","BLADE_UART_SEL0","","","", /*M0-M7*/ "","","","","","BLADE_UART_SEL1","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "","","","","","power-chassis-control","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","","","","","host0-ready", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","BAT_DETECT","","power-chassis-good","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","", /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; }; &sgpiom0 { gpio-line-names = /*"input pin","output pin"*/ /*A0 - A7*/ "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N", "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N", "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N", "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N", "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N", "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N", "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N", "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N", /*B0 - B7*/ "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N", "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N", "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N", "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N", "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N", "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N", "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N", "PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N", /*C0 - C7*/ "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N", "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N", "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N", "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N", "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N", "PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N", "PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N", "PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N", /*D0 - D7*/ "PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N", "PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N", "PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N", "PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N", "PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N", "PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N", "PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N", "PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N", /*E0 - E7*/ "PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N", "PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N", "PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N", "PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N", "PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N", "PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N", "PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N", "PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N", /*F0 - F7*/ "PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N", "PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N", "PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N", "PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N", "PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N", "PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N", "PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N", "PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N", /*G0 - G7*/ "PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N", "PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N", "PWRGD_FCB_1","FM_BMC_RST_RTCRST_R", "PWRGD_FCB_2","", "PWRGD_FCB_3","FM_MDIO_SW_SEL", "PWRGD_FCB_4","FM_P24V_SMPWR_EN", "PWRGD_FCB_6","", "PWRGD_FCB_5","", /*H0 - H7*/ "LEAK_DETECT_MTIA_BLADE1_N","", "LEAK_DETECT_MTIA_BLADE2_N","", "LEAK_DETECT_MTIA_BLADE3_N","", "LEAK_DETECT_MTIA_BLADE4_N","", "LEAK_DETECT_MTIA_BLADE5_N","", "LEAK_DETECT_MTIA_BLADE6_N","", "LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N", "LEAK_DETECT_MTIA_BLADE8_N","", /*I0 - I7*/ "LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N", "LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N", "LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N", "LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N", "LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N", "LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N", "LEAK_DETECT_MTIA_BLADE15_N","BMC_READY", "LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N", /*J0 - J7*/ "LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N", "LEAK_DETECT_NW_BLADE2_N","", "LEAK_DETECT_NW_BLADE3_N","", "LEAK_DETECT_NW_BLADE4_N","", "LEAK_DETECT_NW_BLADE5_N","", "LEAK_DETECT_NW_BLADE6_N","", "PWRGD_MTIA_BLADE1_HSC_PWROK_N","", "PWRGD_MTIA_BLADE2_HSC_PWROK_N","", /*K0 - K7*/ "PWRGD_MTIA_BLADE3_HSC_PWROK_N","", "PWRGD_MTIA_BLADE4_HSC_PWROK_N","", "PWRGD_MTIA_BLADE5_HSC_PWROK_N","", "PWRGD_MTIA_BLADE6_HSC_PWROK_N","", "PWRGD_MTIA_BLADE7_HSC_PWROK_N","", "PWRGD_MTIA_BLADE8_HSC_PWROK_N","", "PWRGD_MTIA_BLADE9_HSC_PWROK_N","", "PWRGD_MTIA_BLADE10_HSC_PWROK_N","", /*L0 - L7*/ "PWRGD_MTIA_BLADE11_HSC_PWROK_N","", "PWRGD_MTIA_BLADE12_HSC_PWROK_N","", "PWRGD_MTIA_BLADE13_HSC_PWROK_N","", "PWRGD_MTIA_BLADE14_HSC_PWROK_N","", "PWRGD_MTIA_BLADE15_HSC_PWROK_N","", "PWRGD_MTIA_BLADE16_HSC_PWROK_N","", "PWRGD_NW_BLADE1_HSC_PWROK_N","", "PWRGD_NW_BLADE2_HSC_PWROK_N","", /*M0 - M7*/ "PWRGD_NW_BLADE3_HSC_PWROK_N","", "PWRGD_NW_BLADE4_HSC_PWROK_N","", "PWRGD_NW_BLADE5_HSC_PWROK_N","", "PWRGD_NW_BLADE6_HSC_PWROK_N","", "RPU_READY","", "IT_GEAR_RPU_LINK_N","", "IT_GEAR_LEAK","", "WATER_VALVE_CLOSED_N","", /*N0 - N7*/ "VALVE_STATUS_0","", "VALVE_STATUS_1","", "PCA9555_IRQ1_N","", "PCA9555_IRQ2_N","", "CR_TOGGLE_BOOT_N","", "IRQ_FCB_1_N","", "IRQ_FCB_2_N","", "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","", /*O0 - O7*/ "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","", "BOT_BCB_CABLE_PRSNT_N","", "TOP_BCB_CABLE_PRSNT_N","", "IRQ_FCB_3_N","", "IRQ_FCB_4_N","", "CHASSIS_LEAK0_DETECT_N","", "CHASSIS_LEAK1_DETECT_N","", "PCA9555_IRQ3_N","", /*P0 - P7*/ "PCA9555_IRQ4_N","", "PCA9555_IRQ5_N","", "CMM_AC_PWR_BTN_N","", "RPU_READY_SPARE","", "IT_GEAR_LEAK_SPARE","", "IT_GEAR_RPU_LINK_SPARE_N","", "IRQ_FCB_6_N","", "IRQ_FCB_5_N",""; }; [ Dauer der Verarbeitung: 0.5 Sekunden (vorverarbeitet) ] |
2026-04-07