Quelle  sc7180-trogdor-wormdingler.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Google Wormdingler board device tree source
 *
 * Copyright 2021 Google LLC.
 */

/dts-v1/;

#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-detachable.dtsi"

/ {
 avdd_lcd: avdd-lcd-regulator {
  compatible = "regulator-fixed";
  regulator-name = "avdd_lcd";

  gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  pinctrl-names = "default";
  pinctrl-0 = <&avdd_lcd_en>;

  vin-supply = <&pp5000_a>;
 };

 avee_lcd: avee-lcd-regulator {
  compatible = "regulator-fixed";
  regulator-name = "avee_lcd";

  gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  pinctrl-names = "default";
  pinctrl-0 = <&avee_lcd_en>;

  vin-supply = <&pp5000_a>;
 };

 pp1800_ts:
 v1p8_mipi: v1p8-mipi-regulator {
  compatible = "regulator-fixed";
  regulator-name = "v1p8_mipi";

  gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  pinctrl-names = "default";
  pinctrl-0 = <&mipi_1800_en>;

  vin-supply = <&pp3300_a>;
 };

 thermal-zones {
  skin_temp_thermal: skin-temp-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&pm6150_adc_tm 1>;
   sustainable-power = <574>;

   trips {
    skin_temp_alert0: trip-point0 {
     temperature = <58000>;
     hysteresis = <1000>;
     type = "passive";
    };

    skin_temp_alert1: trip-point1 {
     temperature = <62500>;
     hysteresis = <1000>;
     type = "passive";
    };

    skin-temp-crit {
     temperature = <68000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&skin_temp_alert0>;
     cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };

    map1 {
     trip = <&skin_temp_alert1>;
     cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };
 };
};

&backlight {
 pwms = <&cros_ec_pwm 0>;
};

&camcc {
 status = "okay";
};

&cros_ec {
 base_detection: cbas {
  compatible = "google,cros-cbas";
 };
};

&i2c4 {
 status = "okay";
 clock-frequency = <400000>;

 ap_ts: touchscreen@1 {
  compatible = "hid-over-i2c";
  reg = <0x01>;
  pinctrl-names = "default";
  pinctrl-0 = <&ts_int_l>;

  interrupt-parent = <&tlmm>;
  interrupts = <9 IRQ_TYPE_EDGE_FALLING>;

  panel = <&panel>;
  post-power-on-delay-ms = <70>;
  hid-descr-addr = <0x0001>;

  vdd-supply = <&pp3300_ts>;
  vddl-supply = <&pp1800_ts>;
 };
};

&mdss_dsi0 {

 panel: panel@0 {
  reg = <0>;
  enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vdd_reset_1800>;
  avdd-supply = <&avdd_lcd>;
  avee-supply = <&avee_lcd>;
  pp1800-supply = <&v1p8_mipi>;
  pp3300-supply = <&pp3300_dx_edp>;
  backlight = <&backlight>;
  rotation = <270>;

  port {
   panel_in: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };

 ports {
  port@1 {
   endpoint {
    remote-endpoint = <&panel_in>;
    data-lanes = <0 1 2 3>;
   };
  };
 };
};

&pm6150_adc {
 channel@4d {
  reg = <ADC5_AMUX_THM1_100K_PU>;
  qcom,ratiometric;
  qcom,hw-settle-time = <200>;
  label = "skin_therm";
 };
};

&pm6150_adc_tm {
 status = "okay";

 skin-temp-thermistor@1 {
  reg = <1>;
  io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
  qcom,ratiometric;
  qcom,hw-settle-time-us = <200>;
 };
};

&pp1800_uf_cam {
 status = "okay";
};

&pp1800_wf_cam {
 status = "okay";
};

&pp2800_uf_cam {
 status = "okay";
};

&pp2800_wf_cam {
 status = "okay";
};

&wifi {
 qcom,calibration-variant = "GO_WORMDINGLER";
};

/*
 * No eDP on this board but it's logically the same signal so just give it
 * a new name and assign the proper GPIO.
 */
pp3300_disp_on: &pp3300_dx_edp {
 gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
};

/* PINCTRL - modifications to sc7180-trogdor.dtsi */

/*
 * No eDP on this board but it's logically the same signal so just give it
 * a new name and assign the proper GPIO.
 */

tp_en: &en_pp3300_dx_edp {
 pins = "gpio85";
};

/* PINCTRL - board-specific pinctrl */

&tlmm {
 gpio-line-names = "HUB_RST_L",
     "AP_RAM_ID0",
     "AP_SKU_ID2",
     "AP_RAM_ID1",
     "",
     "AP_RAM_ID2",
     "UF_CAM_EN",
     "WF_CAM_EN",
     "TS_RESET_L",
     "TS_INT_L",
     "",
     "",
     "AP_EDP_BKLTEN",
     "UF_CAM_MCLK",
     "WF_CAM_CLK",
     "",
     "",
     "UF_CAM_SDA",
     "UF_CAM_SCL",
     "WF_CAM_SDA",
     "WF_CAM_SCL",
     "AVEE_LCD_EN",
     "",
     "AMP_EN",
     "",
     "",
     "",
     "",
     "HP_IRQ",
     "WF_CAM_RST_L",
     "UF_CAM_RST_L",
     "AP_BRD_ID2",
     "",
     "AP_BRD_ID0",
     "AP_H1_SPI_MISO",
     "AP_H1_SPI_MOSI",
     "AP_H1_SPI_CLK",
     "AP_H1_SPI_CS_L",
     "BT_UART_CTS",
     "BT_UART_RTS",
     "BT_UART_TXD",
     "BT_UART_RXD",
     "H1_AP_INT_ODL",
     "",
     "UART_AP_TX_DBG_RX",
     "UART_DBG_TX_AP_RX",
     "HP_I2C_SDA",
     "HP_I2C_SCL",
     "FORCED_USB_BOOT",
     "AMP_BCLK",
     "AMP_LRCLK",
     "AMP_DIN",
     "",
     "HP_BCLK",
     "HP_LRCLK",
     "HP_DOUT",
     "HP_DIN",
     "HP_MCLK",
     "AP_SKU_ID0",
     "AP_EC_SPI_MISO",
     "AP_EC_SPI_MOSI",
     "AP_EC_SPI_CLK",
     "AP_EC_SPI_CS_L",
     "AP_SPI_CLK",
     "AP_SPI_MOSI",
     "AP_SPI_MISO",
     /*
      * AP_FLASH_WP_L is crossystem ABI. Schematics
      * call it BIOS_FLASH_WP_L.
      */
     "AP_FLASH_WP_L",
     "",
     "AP_SPI_CS0_L",
     "",
     "",
     "",
     "",
     "WLAN_SW_CTRL",
     "",
     "REPORT_E",
     "",
     "ID0",
     "",
     "ID1",
     "",
     "",
     "",
     "CODEC_PWR_EN",
     "HUB_EN",
     "TP_EN",
     "MIPI_1.8V_EN",
     "VDD_RESET_1.8V",
     "AVDD_LCD_EN",
     "",
     "AP_SKU_ID1",
     "AP_RST_REQ",
     "",
     "AP_BRD_ID1",
     "AP_EC_INT_L",
     "SDM_GRFC_3",
     "",
     "",
     "BOOT_CONFIG_4",
     "BOOT_CONFIG_2",
     "",
     "",
     "",
     "",
     "",
     "",
     "",
     "BOOT_CONFIG_3",
     "WCI2_LTE_COEX_TXD",
     "WCI2_LTE_COEX_RXD",
     "",
     "",
     "",
     "",
     "FORCED_USB_BOOT_POL",
     "AP_TS_PEN_I2C_SDA",
     "AP_TS_PEN_I2C_SCL",
     "DP_HOT_PLUG_DET",
     "EC_IN_RW_ODL";

 avdd_lcd_en: avdd-lcd-en-state {
  pins = "gpio88";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 avee_lcd_en: avee-lcd-en-state {
  pins = "gpio21";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 mipi_1800_en: mipi-1800-en-state {
  pins = "gpio86";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 vdd_reset_1800: vdd-reset-1800-state {
  pins = "gpio87";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };
};