Quelle  sm8650-mtp.dts   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023, Linaro Limited
 */

/dts-v1/;

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8650.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 8
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"

/ {
 model = "Qualcomm Technologies, Inc. SM8650 MTP";
 compatible = "qcom,sm8650-mtp", "qcom,sm8650";

 aliases {
  serial0 = &uart15;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 pmic-glink {
  compatible = "qcom,sm8650-pmic-glink",
        "qcom,sm8550-pmic-glink",
        "qcom,pmic-glink";
  #address-cells = <1>;
  #size-cells = <0>;
  orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;

  connector@0 {
   compatible = "usb-c-connector";
   reg = <0>;

   power-role = "dual";
   data-role = "dual";

   ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;

     pmic_glink_hs_in: endpoint {
      remote-endpoint = <&usb_1_dwc3_hs>;
     };
    };

    port@1 {
     reg = <1>;

     pmic_glink_ss_in: endpoint {
      remote-endpoint = <&usb_dp_qmpphy_out>;
     };
    };
   };
  };
 };

 sound {
  compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
  model = "SM8650-MTP";
  audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
    "SpkrRight IN", "WSA_SPK2 OUT";

  wsa-dai-link {
   link-name = "WSA Playback";

   cpu {
    sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
   };

   codec {
    sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";

  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;

  regulator-always-on;
  regulator-boot-on;
 };
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8550-rpmh-regulators";

  vdd-bob1-supply = <&vph_pwr>;
  vdd-bob2-supply = <&vph_pwr>;
  vdd-l2-l13-l14-supply = <&vreg_bob1>;
  vdd-l3-supply = <&vreg_s1c_1p2>;
  vdd-l5-l16-supply = <&vreg_bob1>;
  vdd-l6-l7-supply = <&vreg_bob1>;
  vdd-l8-l9-supply = <&vreg_bob1>;
  vdd-l11-supply = <&vreg_s1c_1p2>;
  vdd-l12-supply = <&vreg_s6c_1p8>;
  vdd-l15-supply = <&vreg_s6c_1p8>;
  vdd-l17-supply = <&vreg_bob2>;

  qcom,pmic-id = "b";

  vreg_bob1: bob1 {
   regulator-name = "vreg_bob1";
   regulator-min-microvolt = <3296000>;
   regulator-max-microvolt = <3960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_bob2: bob2 {
   regulator-name = "vreg_bob2";
   regulator-min-microvolt = <2720000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2b_3p0: ldo2 {
   regulator-name = "vreg_l2b_3p0";
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5b_3p1: ldo5 {
   regulator-name = "vreg_l5b_3p1";
   regulator-min-microvolt = <3104000>;
   regulator-max-microvolt = <3104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6b_1p8: ldo6 {
   regulator-name = "vreg_l6b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7b_1p8: ldo7 {
   regulator-name = "vreg_l7b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8b_1p8: ldo8 {
   regulator-name = "vreg_l8b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9b_2p9: ldo9 {
   regulator-name = "vreg_l9b_2p9";
   regulator-min-microvolt = <2960000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11b_1p2: ldo11 {
   regulator-name = "vreg_l11b_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1504000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12b_1p8: ldo12 {
   regulator-name = "vreg_l12b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13b_3p0: ldo13 {
   regulator-name = "vreg_l13b_3p0";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14b_3p2: ldo14 {
   regulator-name = "vreg_l14b_3p2";
   regulator-min-microvolt = <3200000>;
   regulator-max-microvolt = <3200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15b_1p8: ldo15 {
   regulator-name = "vreg_l15b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16b_2p8: ldo16 {
   regulator-name = "vreg_l16b_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17b_2p5: ldo17 {
   regulator-name = "vreg_l17b_2p5";
   regulator-min-microvolt = <2504000>;
   regulator-max-microvolt = <2504000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm8550vs-rpmh-regulators";

  vdd-l1-supply = <&vreg_s1c_1p2>;
  vdd-l2-supply = <&vreg_s1c_1p2>;
  vdd-l3-supply = <&vreg_s1c_1p2>;
  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;

  qcom,pmic-id = "c";

  vreg_s1c_1p2: smps1 {
   regulator-name = "vreg_s1c_1p2";
   regulator-min-microvolt = <1256000>;
   regulator-max-microvolt = <1348000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s2c_0p8: smps2 {
   regulator-name = "vreg_s2c_0p8";
   regulator-min-microvolt = <852000>;
   regulator-max-microvolt = <1036000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s3c_0p9: smps3 {
   regulator-name = "vreg_s3c_0p9";
   regulator-min-microvolt = <976000>;
   regulator-max-microvolt = <1064000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s4c_1p2: smps4 {
   regulator-name = "vreg_s4c_1p2";
   regulator-min-microvolt = <1224000>;
   regulator-max-microvolt = <1280000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s5c_0p7: smps5 {
   regulator-name = "vreg_s5c_0p7";
   regulator-min-microvolt = <752000>;
   regulator-max-microvolt = <900000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s6c_1p8: smps6 {
   regulator-name = "vreg_s6c_1p8";
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <2000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1c_1p2: ldo1 {
   regulator-name = "vreg_l1c_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3c_1p2: ldo3 {
   regulator-name = "vreg_l3c_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8550vs-rpmh-regulators";

  vdd-l1-supply = <&vreg_s3c_0p9>;

  qcom,pmic-id = "d";

  vreg_l1d_0p88: ldo1 {
   regulator-name = "vreg_l1d_0p88";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-3 {
  compatible = "qcom,pm8550vs-rpmh-regulators";

  vdd-l3-supply = <&vreg_s3c_0p9>;

  qcom,pmic-id = "e";

  vreg_l3e_0p9: ldo3 {
   regulator-name = "vreg_l3e_0p9";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-4 {
  compatible = "qcom,pm8550vs-rpmh-regulators";

  vdd-l1-supply = <&vreg_s3c_0p9>;
  vdd-l3-supply = <&vreg_s3c_0p9>;

  qcom,pmic-id = "g";

  vreg_l1g_0p91: ldo1 {
   regulator-name = "vreg_l1g_0p91";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3g_0p91: ldo3 {
   regulator-name = "vreg_l3g_0p91";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-5 {
  compatible = "qcom,pm8550ve-rpmh-regulators";

  vdd-l1-supply = <&vreg_s3c_0p9>;
  vdd-l2-supply = <&vreg_s3c_0p9>;
  vdd-l3-supply = <&vreg_s1c_1p2>;
  vdd-s4-supply = <&vph_pwr>;

  qcom,pmic-id = "i";

  vreg_s4i_0p85: smps4 {
   regulator-name = "vreg_s4i_0p85";
   regulator-min-microvolt = <852000>;
   regulator-max-microvolt = <1004000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1i_0p88: ldo1 {
   regulator-name = "vreg_l1i_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2i_0p88: ldo2 {
   regulator-name = "vreg_l2i_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3i_1p2: ldo3 {
   regulator-name = "vreg_l3i_0p91";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-6 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "m";

  vdd-l1-l2-supply = <&vreg_s1c_1p2>;
  vdd-l3-l4-supply = <&vreg_bob2>;
  vdd-l5-supply = <&vreg_s6c_1p8>;
  vdd-l6-supply = <&vreg_bob1>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1m_1p1: ldo1 {
   regulator-name = "vreg_l1m_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2m_1p056: ldo2 {
   regulator-name = "vreg_l2m_1p056";
   regulator-min-microvolt = <1056000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3m_2p8: ldo3 {
   regulator-name = "vreg_l3m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4m_2p8: ldo4 {
   regulator-name = "vreg_l4m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5m_1p8: ldo5 {
   regulator-name = "vreg_l5m_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6m_2p8: ldo6 {
   regulator-name = "vreg_l6m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7m_2p96: ldo7 {
   regulator-name = "vreg_l7m_2p96";
   regulator-min-microvolt = <2960000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-7 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "n";

  vdd-l1-l2-supply = <&vreg_s1c_1p2>;
  vdd-l3-l4-supply = <&vreg_s6c_1p8>;
  vdd-l5-supply = <&vreg_bob2>;
  vdd-l6-supply = <&vreg_bob2>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1n_1p1: ldo1 {
   regulator-name = "vreg_l1n_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2n_1p056: ldo2 {
   regulator-name = "vreg_l2n_1p056";
   regulator-min-microvolt = <1056000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3n_1p8: ldo3 {
   regulator-name = "vreg_l3n_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4n_1p8: ldo4 {
   regulator-name = "vreg_l4n_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5n_2p8: ldo5 {
   regulator-name = "vreg_l5n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6n_2p8: ldo6 {
   regulator-name = "vreg_l6n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7n_3p3: ldo7 {
   regulator-name = "vreg_l7n_3p3";
   regulator-min-microvolt = <3304000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };
};

&iris {
 status = "okay";
};

&lpass_tlmm {
 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
  pins = "gpio21";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&mdss {
 status = "okay";
};

&mdss_dsi0 {
 vdda-supply = <&vreg_l3i_1p2>;

 status = "okay";

 panel@0 {
  compatible = "visionox,vtdr6130";
  reg = <0>;

  reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;

  vddio-supply = <&vreg_l12b_1p8>;
  vci-supply = <&vreg_l13b_3p0>;
  vdd-supply = <&vreg_l11b_1p2>;

  pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
  pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
  pinctrl-names = "default", "sleep";

  port {
   panel0_in: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };
};

&mdss_dsi0_out {
 remote-endpoint = <&panel0_in>;
 data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
 vdds-supply = <&vreg_l1i_0p88>;

 status = "okay";
};

&pcie0 {
 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

 pinctrl-0 = <&pcie0_default_state>;
 pinctrl-names = "default";

 status = "okay";
};

&pcie0_phy {
 vdda-phy-supply = <&vreg_l1i_0p88>;
 vdda-pll-supply = <&vreg_l3i_1p2>;

 status = "okay";
};

&pcie1 {
 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;

 pinctrl-0 = <&pcie1_default_state>;
 pinctrl-names = "default";

 status = "okay";
};

&pcie1_phy {
 vdda-phy-supply = <&vreg_l3e_0p9>;
 vdda-pll-supply = <&vreg_l3i_1p2>;
 vdda-qref-supply = <&vreg_l1i_0p88>;

 status = "okay";
};

&pm8550_gpios {
 sdc2_card_det_n: sdc2-card-det-state {
  pins = "gpio12";
  function = "normal";
  bias-pull-up;
  input-enable;
  output-disable;
  power-source = <1>; /* 1.8 V */
 };
};

&pm8550b_eusb2_repeater {
 vdd18-supply = <&vreg_l15b_1p8>;
 vdd3-supply = <&vreg_l5b_3p1>;
};

&qupv3_id_1 {
 status = "okay";
};

&remoteproc_adsp {
 firmware-name = "qcom/sm8650/adsp.mbn",
   "qcom/sm8650/adsp_dtb.mbn";

 status = "okay";
};

&remoteproc_cdsp {
 firmware-name = "qcom/sm8650/cdsp.mbn",
   "qcom/sm8650/cdsp_dtb.mbn";

 status = "okay";
};

&remoteproc_mpss {
 firmware-name = "qcom/sm8650/modem.mbn",
   "qcom/sm8650/modem_dtb.mbn";

 status = "okay";
};

&sdhc_2 {
 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;

 vmmc-supply = <&vreg_l9b_2p9>;
 vqmmc-supply = <&vreg_l8b_1p8>;
 bus-width = <4>;
 no-sdio;
 no-mmc;

 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
 pinctrl-names = "default", "sleep";

 status = "okay";
};

&sleep_clk {
 clock-frequency = <32764>;
};

&swr0 {
 status = "okay";

 /* WSA8845, Speaker Left */
 left_spkr: speaker@0,0 {
  compatible = "sdw20217020400";
  reg = <0 0>;
  pinctrl-0 = <&spkr_1_sd_n_active>;
  pinctrl-names = "default";
  powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrLeft";
  vdd-1p8-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l3c_1p2>;

  /*
   * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
   * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
   * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
   * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
   * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
   * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
   */
  qcom,port-mapping = <1 2 3 7 10 13>;
 };

 /* WSA8845, Speaker Right */
 right_spkr: speaker@0,1 {
  compatible = "sdw20217020400";
  reg = <0 1>;
  pinctrl-0 = <&spkr_2_sd_n_active>;
  pinctrl-names = "default";
  powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrRight";
  vdd-1p8-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l3c_1p2>;

  /*
   * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
   * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
   * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
   * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
   * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
   * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
   */
  qcom,port-mapping = <4 5 6 7 11 13>;
 };
};

&tlmm {
 /* Reserved I/Os for NFC */
 gpio-reserved-ranges = <32 8>, <74 1>;

 disp0_reset_n_active: disp0-reset-n-active-state {
  pins = "gpio133";
  function = "gpio";
  drive-strength = <8>;
  bias-disable;
 };

 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
  pins = "gpio133";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 mdp_vsync_active: mdp-vsync-active-state {
  pins = "gpio86";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 mdp_vsync_suspend: mdp-vsync-suspend-state {
  pins = "gpio86";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
  pins = "gpio77";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&uart15 {
 status = "okay";
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;

 vcc-supply = <&vreg_l17b_2p5>;
 vcc-max-microamp = <1300000>;
 vccq-supply = <&vreg_l1c_1p2>;
 vccq-max-microamp = <1200000>;

 status = "okay";
};

&ufs_mem_phy {
 vdda-phy-supply = <&vreg_l1d_0p88>;
 vdda-pll-supply = <&vreg_l3i_1p2>;

 status = "okay";
};

/*
 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
 * USB SS -> USB-C
 */

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 dr_mode = "otg";
 usb-role-switch;
};

&usb_1_dwc3_hs {
 remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
 vdd-supply = <&vreg_l1i_0p88>;
 vdda12-supply = <&vreg_l3i_1p2>;

 phys = <&pm8550b_eusb2_repeater>;

 status = "okay";
};

&usb_dp_qmpphy {
 vdda-phy-supply = <&vreg_l3i_1p2>;
 vdda-pll-supply = <&vreg_l3g_0p91>;

 status = "okay";
};

&usb_dp_qmpphy_out {
 remote-endpoint = <&pmic_glink_ss_in>;
};

&xo_board {
 clock-frequency = <76800000>;
};