Quelle  rk3568-evb1-v10.dts   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"

/ {
 model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
 compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";

 aliases {
  ethernet0 = &gmac0;
  ethernet1 = &gmac1;
  mmc0 = &sdmmc0;
  mmc1 = &sdhci;
 };

 backlight: backlight {
  compatible = "pwm-backlight";
  brightness-levels = <20 220>;
  default-brightness-level = <100>;
  num-interpolated-steps = <200>;
  power-supply = <&vcc3v3_sys>;
  pwms = <&pwm4 0 25000 0>;
 };

 chosen: chosen {
  stdout-path = "serial2:1500000n8";
 };

 dc_12v: regulator-dc-12v {
  compatible = "regulator-fixed";
  regulator-name = "dc_12v";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <12000000>;
  regulator-max-microvolt = <12000000>;
 };

 hdmi-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi_con_in: endpoint {
    remote-endpoint = <&hdmi_out_con>;
   };
  };
 };

 leds {
  compatible = "gpio-leds";

  led_work: led-0 {
   gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
   function = LED_FUNCTION_HEARTBEAT;
   color = <LED_COLOR_ID_BLUE>;
   linux,default-trigger = "heartbeat";
   pinctrl-names = "default";
   pinctrl-0 = <&led_work_en>;
  };
 };

 rk809-sound {
  compatible = "simple-audio-card";
  simple-audio-card,format = "i2s";
  simple-audio-card,name = "Analog RK809";
  simple-audio-card,mclk-fs = <256>;

  simple-audio-card,cpu {
   sound-dai = <&i2s1_8ch>;
  };
  simple-audio-card,codec {
   sound-dai = <&rk809>;
  };
 };

 vcc3v3_sys: regulator-vcc3v3-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&dc_12v>;
 };

 vcc5v0_sys: regulator-vcc5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&dc_12v>;
 };

 vcc5v0_usb: regulator-vcc5v0-usb {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_usb";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&dc_12v>;
 };

 vcc5v0_usb_host: regulator-vcc5v0-usb-host {
  compatible = "regulator-fixed";
  enable-active-high;
  gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_usb_host_en>;
  regulator-name = "vcc5v0_usb_host";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc5v0_usb>;
 };

 vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
  compatible = "regulator-fixed";
  enable-active-high;
  gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_usb_otg_en>;
  regulator-name = "vcc5v0_usb_otg";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc5v0_usb>;
 };

 vcc3v3_lcd0_n: regulator-vcc3v3-lcd0-n {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_lcd0_n";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  enable-active-high;
  gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
  vin-supply = <&vcc3v3_sys>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc3v3_lcd0_n_en>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 vcc3v3_lcd1_n: regulator-vcc3v3-lcd1-n {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_lcd1_n";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  enable-active-high;
  gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
  vin-supply = <&vcc3v3_sys>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc3v3_lcd1_n_en>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };
};

&combphy0 {
 status = "okay";
};

&combphy1 {
 status = "okay";
};

&cpu0 {
 cpu-supply = <&vdd_cpu>;
};

&cpu1 {
 cpu-supply = <&vdd_cpu>;
};

&cpu2 {
 cpu-supply = <&vdd_cpu>;
};

&cpu3 {
 cpu-supply = <&vdd_cpu>;
};

&dsi0 {
 clock-master;
 #address-cells = <1>;
 #size-cells = <0>;
 status = "okay";

 panel@0 {
  compatible = "wanchanglong,w552793baa", "raydium,rm67200";
  reg = <0>;
  backlight = <&backlight>;
  iovcc-supply = <&vcc3v3_lcd0_n>;
  reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
  vdd-supply = <&vcc3v3_lcd0_n>;
  vsn-supply = <&vcc5v0_sys>;
  vsp-supply = <&vcc5v0_sys>;

  port {
   panel_in_dsi: endpoint {
    remote-endpoint = <&dsi0_out_panel>;
   };
  };
 };

};

&dsi0_in {
 dsi0_in_vp1: endpoint {
  remote-endpoint = <&vp1_out_dsi0>;
 };
};

&dsi0_out {
 dsi0_out_panel: endpoint {
  remote-endpoint = <&panel_in_dsi>;
 };
};

&dsi_dphy0 {
 status = "okay";
};

&gmac0 {
 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
 assigned-clock-rates = <0>, <125000000>;
 clock_in_out = "output";
 phy-handle = <&rgmii_phy0>;
 phy-mode = "rgmii-id";
 pinctrl-names = "default";
 pinctrl-0 = <&gmac0_miim
       &gmac0_tx_bus2
       &gmac0_rx_bus2
       &gmac0_rgmii_clk
       &gmac0_rgmii_bus>;
 status = "okay";
};

&gmac1 {
 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
 assigned-clock-rates = <0>, <125000000>;
 clock_in_out = "output";
 phy-handle = <&rgmii_phy1>;
 phy-mode = "rgmii-id";
 pinctrl-names = "default";
 pinctrl-0 = <&gmac1m1_miim
       &gmac1m1_tx_bus2
       &gmac1m1_rx_bus2
       &gmac1m1_rgmii_clk
       &gmac1m1_rgmii_bus>;
 status = "okay";
};

&gpu {
 mali-supply = <&vdd_gpu>;
 status = "okay";
};

&hdmi {
 avdd-0v9-supply = <&vdda0v9_image>;
 avdd-1v8-supply = <&vcca1v8_image>;
 status = "okay";
};

&hdmi_in {
 hdmi_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi>;
 };
};

&hdmi_out {
 hdmi_out_con: endpoint {
  remote-endpoint = <&hdmi_con_in>;
 };
};

&hdmi_sound {
 status = "okay";
};

&i2c0 {
 status = "okay";

 vdd_cpu: regulator@1c {
  compatible = "tcs,tcs4525";
  reg = <0x1c>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <800000>;
  regulator-max-microvolt = <1150000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc5v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 rk809: pmic@20 {
  compatible = "rockchip,rk809";
  reg = <0x20>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
  assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
  assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
  #clock-cells = <1>;
  clock-names = "mclk";
  clocks = <&cru I2S1_MCLKOUT_TX>;
  pinctrl-names = "default";
  pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
  system-power-controller;
  #sound-dai-cells = <0>;
  vcc1-supply = <&vcc3v3_sys>;
  vcc2-supply = <&vcc3v3_sys>;
  vcc3-supply = <&vcc3v3_sys>;
  vcc4-supply = <&vcc3v3_sys>;
  vcc5-supply = <&vcc3v3_sys>;
  vcc6-supply = <&vcc3v3_sys>;
  vcc7-supply = <&vcc3v3_sys>;
  vcc8-supply = <&vcc3v3_sys>;
  vcc9-supply = <&vcc3v3_sys>;
  wakeup-source;

  regulators {
   vdd_logic: DCDC_REG1 {
    regulator-name = "vdd_logic";
    regulator-always-on;
    regulator-boot-on;
    regulator-initial-mode = <0x2>;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_gpu: DCDC_REG2 {
    regulator-name = "vdd_gpu";
    regulator-always-on;
    regulator-initial-mode = <0x2>;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_ddr: DCDC_REG3 {
    regulator-name = "vcc_ddr";
    regulator-always-on;
    regulator-boot-on;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vdd_npu: DCDC_REG4 {
    regulator-name = "vdd_npu";
    regulator-initial-mode = <0x2>;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8: DCDC_REG5 {
    regulator-name = "vcc_1v8";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_image: LDO_REG1 {
    regulator-name = "vdda0v9_image";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda_0v9: LDO_REG2 {
    regulator-name = "vdda_0v9";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_pmu: LDO_REG3 {
    regulator-name = "vdda0v9_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <900000>;
    };
   };

   vccio_acodec: LDO_REG4 {
    regulator-name = "vccio_acodec";
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vccio_sd: LDO_REG5 {
    regulator-name = "vccio_sd";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_pmu: LDO_REG6 {
    regulator-name = "vcc3v3_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcca_1v8: LDO_REG7 {
    regulator-name = "vcca_1v8";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca1v8_pmu: LDO_REG8 {
    regulator-name = "vcca1v8_pmu";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vcca1v8_image: LDO_REG9 {
    regulator-name = "vcca1v8_image";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_3v3: SWITCH_REG1 {
    regulator-name = "vcc_3v3";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_sd: SWITCH_REG2 {
    regulator-name = "vcc3v3_sd";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };
  };

  codec {
   rockchip,mic-in-differential;
  };
 };
};

&i2c1 {
 status = "okay";

 touchscreen0: goodix@14 {
  compatible = "goodix,gt1151";
  reg = <0x14>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
  AVDD28-supply = <&vcc3v3_lcd0_n>;
  irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&touch_int &touch_rst>;
  reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
  VDDIO-supply = <&vcc3v3_lcd0_n>;
 };
};

&i2s0_8ch {
 status = "okay";
};

&i2s1_8ch {
 rockchip,trcm-sync-tx-only;
 status = "okay";
};

&mdio0 {
 rgmii_phy0: ethernet-phy@0 {
  compatible = "ethernet-phy-ieee802.3-c22";
  reg = <0x0>;
  reset-assert-us = <20000>;
  reset-deassert-us = <100000>;
  reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
 };
};

&mdio1 {
 rgmii_phy1: ethernet-phy@0 {
  compatible = "ethernet-phy-ieee802.3-c22";
  reg = <0x0>;
  reset-assert-us = <20000>;
  reset-deassert-us = <100000>;
  reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
 };
};

&pinctrl {
 display {
  vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
   rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
  };
  vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
   rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
  };
 };

 leds {
  led_work_en: led_work_en {
   rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pmic {
  pmic_int: pmic_int {
   rockchip,pins =
    <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };

 touchscreen {
  touch_int: touch_int {
   rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
  };
  touch_rst: touch_rst {
   rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 usb {
  vcc5v0_usb_host_en: vcc5v0_usb_host_en {
   rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
  };
  vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
   rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&pmu_io_domains {
 pmuio1-supply = <&vcc3v3_pmu>;
 pmuio2-supply = <&vcc3v3_pmu>;
 vccio1-supply = <&vccio_acodec>;
 vccio2-supply = <&vcc_1v8>;
 vccio3-supply = <&vccio_sd>;
 vccio4-supply = <&vcc_1v8>;
 vccio5-supply = <&vcc_3v3>;
 vccio6-supply = <&vcc_1v8>;
 vccio7-supply = <&vcc_3v3>;
 status = "okay";
};

&pwm4 {
 status = "okay";
};

&saradc {
 vref-supply = <&vcca_1v8>;
 status = "okay";
};

&sdhci {
 bus-width = <8>;
 max-frequency = <200000000>;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 status = "okay";
};

&sdmmc0 {
 bus-width = <4>;
 cap-sd-highspeed;
 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 disable-wp;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc3v3_sd>;
 vqmmc-supply = <&vccio_sd>;
 status = "okay";
};

&tsadc {
 rockchip,hw-tshut-mode = <1>;
 rockchip,hw-tshut-polarity = <0>;
 status = "okay";
};

&uart2 {
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

&usb_host0_xhci {
 extcon = <&usb2phy0>;
 status = "okay";
};

&usb_host1_ehci {
 status = "okay";
};

&usb_host1_ohci {
 status = "okay";
};

&usb_host1_xhci {
 status = "okay";
};

&usb2phy0 {
 status = "okay";
};

&usb2phy0_host {
 phy-supply = <&vcc5v0_usb_host>;
 status = "okay";
};

&usb2phy0_otg {
 phy-supply = <&vcc5v0_usb_otg>;
 status = "okay";
};

&usb2phy1 {
 status = "okay";
};

&usb2phy1_host {
 phy-supply = <&vcc5v0_usb_host>;
 status = "okay";
};

&usb2phy1_otg {
 phy-supply = <&vcc5v0_usb_host>;
 status = "okay";
};

&vop {
 assigned-clocks = <&cru DCLK_VOP0>, <&cru PLL_VPLL>, <&cru DCLK_VOP1>;
 assigned-clock-parents = <&pmucru PLL_HPLL>, <&xin24m>, <&cru PLL_VPLL>;
 assigned-clock-rates = <0>, <132000000>, <132000000>;
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
  reg = <ROCKCHIP_VOP2_EP_HDMI0>;
  remote-endpoint = <&hdmi_in_vp0>;
 };
};

&vp1 {
 vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
  reg = <ROCKCHIP_VOP2_EP_MIPI0>;
  remote-endpoint = <&dsi0_in_vp1>;
 };
};