Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/loongarch/kernel/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 6 kB image not shown  

Quelle  numa.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Author:  Xiang Gao <gaoxiang@loongson.cn>
 *          Huacai Chen <chenhuacai@loongson.cn>
 *
 * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/numa_memblks.h>
#include <linux/swap.h>
#include <linux/memblock.h>
#include <linux/pfn.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/loongson.h>
#include <asm/numa.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/time.h>

int numa_off;
cpumask_t cpus_on_node[MAX_NUMNODES];
cpumask_t phys_cpus_on_node[MAX_NUMNODES];
EXPORT_SYMBOL(cpus_on_node);

/*
 * apicid, cpu, node mappings
 */

s16 __cpuid_to_node[CONFIG_NR_CPUS] = {
 [0 ... CONFIG_NR_CPUS - 1] = NUMA_NO_NODE
};
EXPORT_SYMBOL(__cpuid_to_node);

#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);

static int __init pcpu_cpu_to_node(int cpu)
{
 return early_cpu_to_node(cpu);
}

static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
{
 if (early_cpu_to_node(from) == early_cpu_to_node(to))
  return LOCAL_DISTANCE;
 else
  return REMOTE_DISTANCE;
}

void __init pcpu_populate_pte(unsigned long addr)
{
 populate_kernel_pte(addr);
}

void __init setup_per_cpu_areas(void)
{
 unsigned long delta;
 unsigned int cpu;
 int rc = -EINVAL;

 if (pcpu_chosen_fc == PCPU_FC_AUTO) {
  if (nr_node_ids >= 8)
   pcpu_chosen_fc = PCPU_FC_PAGE;
  else
   pcpu_chosen_fc = PCPU_FC_EMBED;
 }

 /*
 * Always reserve area for module percpu variables.  That's
 * what the legacy allocator did.
 */

 if (pcpu_chosen_fc != PCPU_FC_PAGE) {
  rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
         PERCPU_DYNAMIC_RESERVE, PMD_SIZE,
         pcpu_cpu_distance, pcpu_cpu_to_node);
  if (rc < 0)
   pr_warn("%s allocator failed (%d), falling back to page size\n",
    pcpu_fc_names[pcpu_chosen_fc], rc);
 }
 if (rc < 0)
  rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_cpu_to_node);
 if (rc < 0)
  panic("cannot initialize percpu area (err=%d)", rc);

 delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 for_each_possible_cpu(cpu)
  __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
}
#endif

/*
 * Get nodeid by logical cpu number.
 * __cpuid_to_node maps phyical cpu id to node, so we
 * should use cpu_logical_map(cpu) to index it.
 *
 * This routine is only used in early phase during
 * booting, after setup_per_cpu_areas calling and numa_node
 * initialization, cpu_to_node will be used instead.
 */

int early_cpu_to_node(int cpu)
{
 int physid = cpu_logical_map(cpu);

 if (physid < 0)
  return NUMA_NO_NODE;

 return __cpuid_to_node[physid];
}

void __init early_numa_add_cpu(int cpuid, s16 node)
{
 int cpu = __cpu_number_map[cpuid];

 if (cpu < 0)
  return;

 cpumask_set_cpu(cpu, &cpus_on_node[node]);
 cpumask_set_cpu(cpuid, &phys_cpus_on_node[node]);
}

void numa_add_cpu(unsigned int cpu)
{
 int nid = cpu_to_node(cpu);
 cpumask_set_cpu(cpu, &cpus_on_node[nid]);
}

void numa_remove_cpu(unsigned int cpu)
{
 int nid = cpu_to_node(cpu);
 cpumask_clear_cpu(cpu, &cpus_on_node[nid]);
}

static void __init node_mem_init(unsigned int node)
{
 unsigned long start_pfn, end_pfn;
 unsigned long node_addrspace_offset;

 node_addrspace_offset = nid_to_addrbase(node);
 pr_info("Node%d's addrspace_offset is 0x%lx\n",
   node, node_addrspace_offset);

 get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
 pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n",
  node, start_pfn, end_pfn);

 alloc_node_data(node);
}

#ifdef CONFIG_ACPI_NUMA

/*
 * add_numamem_region
 *
 * Add a uasable memory region described by BIOS. The
 * routine gets each intersection between BIOS's region
 * and node's region, and adds them into node's memblock
 * pool.
 *
 */

static void __init add_numamem_region(u64 start, u64 end, u32 type)
{
 u32 node = pa_to_nid(start);
 u64 size = end - start;
 static unsigned long num_physpages;

 if (start >= end) {
  pr_debug("Invalid region: %016llx-%016llx\n", start, end);
  return;
 }

 num_physpages += (size >> PAGE_SHIFT);
 pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
  node, type, start, size);
 pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
  start >> PAGE_SHIFT, end >> PAGE_SHIFT, num_physpages);
 memblock_set_node(start, size, &memblock.memory, node);
}

static void __init init_node_memblock(void)
{
 u32 mem_type;
 u64 mem_end, mem_start, mem_size;
 efi_memory_desc_t *md;

 /* Parse memory information and activate */
 for_each_efi_memory_desc(md) {
  mem_type = md->type;
  mem_start = md->phys_addr;
  mem_size = md->num_pages << EFI_PAGE_SHIFT;
  mem_end = mem_start + mem_size;

  switch (mem_type) {
  case EFI_LOADER_CODE:
  case EFI_LOADER_DATA:
  case EFI_BOOT_SERVICES_CODE:
  case EFI_BOOT_SERVICES_DATA:
  case EFI_PERSISTENT_MEMORY:
  case EFI_CONVENTIONAL_MEMORY:
   add_numamem_region(mem_start, mem_end, mem_type);
   break;
  case EFI_PAL_CODE:
  case EFI_UNUSABLE_MEMORY:
  case EFI_ACPI_RECLAIM_MEMORY:
   add_numamem_region(mem_start, mem_end, mem_type);
   fallthrough;
  case EFI_RESERVED_TYPE:
  case EFI_RUNTIME_SERVICES_CODE:
  case EFI_RUNTIME_SERVICES_DATA:
  case EFI_MEMORY_MAPPED_IO:
  case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
   pr_info("Resvd: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
     mem_type, mem_start, mem_size);
   break;
  }
 }
}

/*
 * fake_numa_init() - For Non-ACPI systems
 * Return: 0 on success, -errno on failure.
 */

static int __init fake_numa_init(void)
{
 phys_addr_t start = memblock_start_of_DRAM();
 phys_addr_t end = memblock_end_of_DRAM() - 1;

 node_set(0, numa_nodes_parsed);
 pr_info("Faking a node at [mem %pap-%pap]\n", &start, &end);

 return numa_add_memblk(0, start, end + 1);
}

int __init init_numa_memory(void)
{
 int i;
 int ret;
 int node;

 for (i = 0; i < NR_CPUS; i++)
  set_cpuid_to_node(i, NUMA_NO_NODE);

 numa_reset_distance();
 nodes_clear(numa_nodes_parsed);
 nodes_clear(node_possible_map);
 nodes_clear(node_online_map);
 WARN_ON(memblock_clear_hotplug(0, PHYS_ADDR_MAX));

 /* Parse SRAT and SLIT if provided by firmware. */
 ret = acpi_disabled ? fake_numa_init() : acpi_numa_init();
 if (ret < 0)
  return ret;

 node_possible_map = numa_nodes_parsed;
 if (WARN_ON(nodes_empty(node_possible_map)))
  return -EINVAL;

 init_node_memblock();
 if (!memblock_validate_numa_coverage(SZ_1M))
  return -EINVAL;

 for_each_node_mask(node, node_possible_map) {
  node_mem_init(node);
  node_set_online(node);
 }
 max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);

 setup_nr_node_ids();
 loongson_sysconf.nr_nodes = nr_node_ids;
 loongson_sysconf.cores_per_node = cpumask_weight(&phys_cpus_on_node[0]);

 return 0;
}

#endif

int pcibus_to_node(struct pci_bus *bus)
{
 return dev_to_node(&bus->dev);
}
EXPORT_SYMBOL(pcibus_to_node);

Messung V0.5
C=98 H=96 G=96

¤ Dauer der Verarbeitung: 0.9 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.