/** * struct gpio_regulator_state - state description * @value: microvolts or microamps * @gpios: bitfield of gpio target-states for the value * * This structure describes a supported setting of the regulator * and the necessary gpio-state to achieve it. * * The n-th bit in the bitfield describes the state of the n-th GPIO * from the gpios-array defined in gpio_regulator_config below.
*/ struct gpio_regulator_state { int value; int gpios;
};
/** * struct gpio_regulator_config - config structure * @supply_name: Name of the regulator supply * @input_supply: Name of the input regulator supply * @enabled_at_boot: Whether regulator has been enabled at * boot or not. 1 = Yes, 0 = No * This is used to keep the regulator at * the default state * @startup_delay: Start-up time in microseconds * @gflags: Array of GPIO configuration flags for initial * states * @ngpios: Number of GPIOs and configurations available * @states: Array of gpio_regulator_state entries describing * the gpio state for specific voltages * @nr_states: Number of states available * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE * @init_data: regulator_init_data * * This structure contains gpio-voltage regulator configuration * information that must be passed by platform code to the * gpio-voltage regulator driver.
*/ struct gpio_regulator_config { constchar *supply_name; constchar *input_supply;
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.