products/sources/formale sprachen/Cobol/Test-Suite/SQL M/  image not shown  

Quellcode-Bibliothek

© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: cdr016.cob   Sprache: Unknown

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR016.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "CDR016.SCO") calling SQL
      * procedures in file "CDR016.MCO"  

      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1989/04/07 STANDARD COBOL LANGUAGE                          
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * CDR016.SCO                                                    
      * WRITTEN BY: SUN DAJUN                                        
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *                                                              
      *   THIS ROUTINE TESTS THE <unique constraint definition>      
      *                                                              
      * REFERENCES                                                   
      *       AMERICAN NATIONAL STANDARD database language - SQL     
      *                          with Integrity Enhancement          
      *                                                              
      *            SECTION 6.6 <unique constraint definition>        
      *               <unique constraint definition>::=              
      *                      <unique specifition>(<unique column     
      *                      list>)                                  
      *                <unique specifition>::= UNIQUE|PRIMARY KEY    
      *                                                              
      ****************************************************************






      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      * EXEC SQL END DECLARE SECTION END-EXEC

       01  code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC X(18).

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
    
       PROCEDURE DIVISION.
       P0.


           MOVE "SUN" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           CALL "AUTHCK" USING SQLCODE uidx
           MOVE SQLCODE TO SQL-COD
           if (uid NOT = uidx) then
            DISPLAY "ERROR: User " uid " expected."
            DISPLAY "User " uidx " connected."
            DISPLAY " "
            STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, cdr016.sco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
      ******************** BEGIN TEST0352 *******************
      *This program updates a row in PRIMARY KEY TABLE      
      *-- SIZ1_P, this will let two rows have the same value
      * in PRIMARY COLUMNs.                                      

           DISPLAY " FIPS sizing TEST0352 "
           DISPLAY " PRIMARY KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " SELECT COUNT(*) INTO:count1"
           DISPLAY " FROM SIZ1_P"
           DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1;"
           DISPLAY  " "
           DISPLAY " UPDATE SIZ1_P"
           DISPLAY " SET S2 = 'TTT'"
           DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1;"
           DISPLAY "code1 = SQLCODE;"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO:count2"
           DISPLAY " FROM SIZ1_P"
           DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTT' AND S3 = 1;"
           DISPLAY  " "
           MOVE 0 TO count1
           MOVE 0 TO count2
      * EXEC SQL SELECT COUNT(*) INTO:count1
      *  FROM SIZ1_P
      *  WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1 END-EXEC
           CALL "SUB1" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL UPDATE SIZ1_P
      *  SET S2 = 'TTT'
      *  WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1 END-EXEC
           CALL "SUB2" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO:count2
      *  FROM SIZ1_P
      *  WHERE S1 = 'E1' AND S2 = 'TTT' AND S3 = 1 END-EXEC
           CALL "SUB3" USING SQLCODE count2
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB4" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 is not equal to 0."
           DISPLAY " count1 is 1"
           DISPLAY " count2 is 1"
           DISPLAY " Your answer is :"
           DISPLAY " code1 is ", code1
           DISPLAY " count1 is ", count1
           DISPLAY " count2 is ", count2
           if (code1  NOT =  0  AND  count1  =  1  AND  count2  =  1)
             then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0352','pass','MCO') END-EXEC
             CALL "SUB5" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0352','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB6" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr016.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB7" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      **************** END TEST 0352 **********





      ******************** BEGIN TEST0353 *******************
      *This test updates a row or rows on FOREIGN KEY       
      *column in table SIZ1_F,set those rows (E1,*,*,*,*,*  
      **,*,*) to (E9,*,*,*,*,*,*,*,*),but there is not a row
      *(E9,*,*,*,*,*,*,*,*,*) in PRIMARY TABLE -- SIZ1_P,   
      *this should be an   ERROR.                           

           DISPLAY " FIPS sizing TEST0353 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " UPDATE SIZ1_F"
           DISPLAY " SET F1='E9'"
           DISPLAY " WHERE F1='E2';"
           DISPLAY "code1 = SQLCODE;"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count1"
           DISPLAY " FROM SIZ1_F"
           DISPLAY " WHERE F1 = 'E2';"
      * EXEC SQL UPDATE SIZ1_F
      *  SET F1 = 'E9'
      *  WHERE F1 = 'E2' END-EXEC
           CALL "SUB8" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO :count1
      *  FROM SIZ1_F
      *  WHERE F1 = 'E2' END-EXEC
           CALL "SUB9" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD

      * EXEC SQL ROLLBACK WORK;
           CALL "SUB10" USING SQLCODE
           MOVE SQLCODE TO SQL-COD

           DISPLAY " The correct result is code1 not equal 0"
           DISPLAY " count1 = 3"
           DISPLAY " Your answer is code1=", code1
           DISPLAY " count1 = ", count1
           if (code1  NOT =  0  AND  count1  =  3) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0353','pass','MCO') END-EXEC
             CALL "SUB11" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0353','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB12" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr016.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB13" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ******************** END TEST0353 *************************



      ******************** BEGIN TEST0354 ******************
      *This test update a row or rows on FOREIGN KEY       
      *column in table SIZ1_F and there is correspondind   
      *primary key a row  in PRIMARY TABLE -- SIZ1_P and   
      *same forgeign key rows  in  SIZ1_F.                 

           DISPLAY " FIPS sizing TEST0354 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " UPDATE SIZ1_F"
           DISPLAY " SET F1='E1'"
           DISPLAY " WHERE F1='E2' AND F6 = 'RRR';"
           DISPLAY "code1 = SQLCODE;"
           DISPLAY " SELECT COUNT(*) INTO :count1"
           DISPLAY " FROM SIZ1_F"
           DISPLAY " WHERE F1 = 'E1';"
      * EXEC SQL UPDATE SIZ1_F
      *  SET F1 = 'E1'
      *  WHERE F1 = 'E2' AND F6 = 'RRR' END-EXEC
           CALL "SUB14" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO :count1
      *  FROM SIZ1_F
      *  WHERE F1 = 'E1' END-EXEC
           CALL "SUB15" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB16" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct result is code1 equal 0"
           DISPLAY " count1 = 4"
           DISPLAY " Your answer is code1=", code1
           DISPLAY " count1 = ", count1
           if (code1  =  0  AND  count1  =  4) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0354','pass','MCO') END-EXEC
             CALL "SUB17" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0354','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB18" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr016.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB19" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ******************** END TEST0354 *************************



      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]