| products/sources/formale sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei: yts782.cob Sprache: Cobol
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS782. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "YTS782.SCO") calling SQL * procedures in file "YTS782.MCO". *Copyright 1996 National Computing Centre Ltd, *and Computer Logic R&D S.A *on behalf of CTS5 SQL2 Project. *All rights reserved. *The CTS5 SQL2 Project is sponsored by the European Community. * *The National Computing Centre Limited and Computer Logic R&D *have given permission to NIST to distribute this program *over the World Wide Web in order to promote SQL standards. *DISCLAIMER: *This program was reviewed by employees of NIST for *conformance to the SQL standards. *NIST assumes no responsibility for any party's use of *this program. **************************************************************** * * COMMENT SECTION * * SQL VALIDATION TEST SUITE V6.0 * * YTS782.SCO * WRITTEN BY: Susan Watters * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * Set local time zone - invalid value, exception * * * REFERENCES * 16.5 GR1b <set local time zone statement>,<interval * value expression> * 6.10 GR5e <cast specification> * 6.15 F <interval value expression> * F#41 Time zone specification * F#5 DATETIME data types * F#20 CAST functions * * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test * 24/10/95 Table Inserts Corrected * * QA Status: Full FC * * Revised by DWF 1996-03-19 * Added rollback after authid * Fixed syntax errors * Removed EXEC SQL from printf * Fixed pass criteria * Worked around the literal problem **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "CTS1 " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts782.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST7561 ******************* MOVE 1 TO flag DISPLAY " TEST7561 " DISPLAY " Set local time zone - invalid value, exception" DISPLAY "References:" DISPLAY " 16.5 GR1b DISPLAY " DISPLAY " 6.10 GR5e DISPLAY " 6.15 F DISPLAY " F#41 Time zone specification" DISPLAY " F#5 DATETIME data types" DISPLAY " F#20 CAST functions" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *prepare the database DISPLAY "DELETE FROM TTIME_BASE;" * EXEC SQL DELETE FROM TTIME_BASE; CALL "SUB3" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TTIME (PK, TT)" DISPLAY "VALUES (1, TIME '00:00:00');" * EXEC SQL INSERT INTO TTIME (PK, TT) * VALUES (1, TIME '00:00:00'); CALL "SUB4" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TTIME (PK, TT)" DISPLAY "VALUES (2, TIME '10:50:00');" * EXEC SQL INSERT INTO TTIME (PK, TT) * VALUES (2, TIME '10:50:00'); CALL "SUB5" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TTIME (PK, TT)" DISPLAY "VALUES (3, TIME '20:11:00');" * EXEC SQL INSERT INTO TTIME (PK, TT) * VALUES (3, TIME '20:11:00'); CALL "SUB6" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TTIME (PK, TT)" DISPLAY "VALUES (4, TIME '01:45:00');" * EXEC SQL INSERT INTO TTIME (PK, TT) * VALUES (4, TIME '01:45:00'); CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO TTIME (PK)" DISPLAY "VALUES (5);" * EXEC SQL INSERT INTO TTIME (PK) * VALUES (5); CALL "SUB8" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *attempt to set time zone to an invalid interval DISPLAY "SET TIME ZONE INTERVAL '13:01' HOUR TO MINUTE;" * EXEC SQL SET TIME ZONE INTERVAL '13:01' HOUR TO MINUTE * ; CALL "SUB9" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD *That should generate a data exception - invalid time zone *displacement which is SQLSTATE 22009 DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 22009; its value is ", SQLSTATE if (SQLSTATE NOT = "22009") then MOVE 0 TO flag END-IF *check values in tables have not been updated MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM TTIME" DISPLAY " WHERE PK = 1" DISPLAY " AND TT = TIME '00:00:00';" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM TTIME * WHERE PK = 1 * AND TT = TIME '00:00:00'; CALL "SUB10" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "SET TIME ZONE INTERVAL -'13:00' HOUR TO MINUTE;" * EXEC SQL SET TIME ZONE INTERVAL -'13:00' HOUR TO MINUTE * ; CALL "SUB11" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD *That should generate a data exception - invalid time zone *displacement which is SQLSTATE 22009 DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 22009; its value is ", SQLSTATE if (SQLSTATE NOT = "22009") then MOVE 0 TO flag END-IF *check values in tables have not been updated MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM TTIME" DISPLAY " WHERE PK = 1" DISPLAY " AND TT = TIME '00:00:00';" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM TTIME * WHERE PK = 1 * AND TT = TIME '00:00:00'; CALL "SUB12" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF *attempt to insert NULL interval value DISPLAY "SET TIME ZONE CAST ((SELECT A.TT - B.TT " DISPLAY "FROM TTIME A, TTIME B" DISPLAY "WHERE A.PK = 3 AND B.PK = 5) AS INTERVAL HOUR TO - " MINUTE);" * EXEC SQL SET TIME ZONE CAST ((SELECT A.TT - B.TT * FROM TTIME A, TTIME B * WHERE A.PK = 3 AND B.PK = 5) AS INTERVAL HOUR TO MINUTE) * ; CALL "SUB13" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD *That should generate a data exception - invalid time zone *displacement which is SQLSTATE 22009 DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD if (SQLCODE NOT < 0) then MOVE 0 TO flag END-IF DISPLAY "SQLSTATE should be 22009; its value is ", SQLSTATE if (SQLSTATE NOT = "22009") then MOVE 0 TO flag END-IF *check values in tables have not been updated MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM TTIME" DISPLAY " WHERE PK = 1" DISPLAY " AND TT = TIME '00:00:00';" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM TTIME * WHERE PK = 1 * AND TT = TIME '00:00:00'; CALL "SUB14" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "ROLLBACK WORK;" * EXEC SQL ROLLBACK WORK; CALL "SUB15" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " yts782.mco *** pass *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7561','pass','MCO'); CALL "SUB16" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " yts782.mco *** fail *** " * EXEC SQL INSERT INTO CTS1.TESTREPORT * VALUES('7561','fail','MCO'); CALL "SUB17" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST7561 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. [ Dauer der Verarbeitung: 0.10 Sekunden (vorverarbeitet) ] |