Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  bit_vector.cc

  Sprache: C
 

/*
 * Copyright (C) 2011 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */


#include "bit_vector.h"

#include <limits>
#include <sstream>

#include "allocator.h"
#include "bit_vector-inl.h"

namespace art {

BitVector::BitVector(bool expandable,
                     Allocator* allocator,
                     uint32_t storage_size,
                     uint32_t* storage)
  : storage_(storage),
    storage_size_(storage_size),
    allocator_(allocator),
    expandable_(expandable) {
  DCHECK(storage_ != nullptr);

  static_assert(sizeof(*storage_) == kWordBytes, "word bytes");
  static_assert(sizeof(*storage_) * 8u == kWordBits, "word bits");
}

BitVector::BitVector(uint32_t start_bits, bool expandable, Allocator* allocator)
    : BitVector(expandable,
                allocator,
                BitsToWords(start_bits),
                static_cast<uint32_t*>(allocator->Alloc(BitsToWords(start_bits) * kWordBytes))) {}

BitVector::BitVector(const BitVector& src,
                     bool expandable,
                     Allocator* allocator)
  : BitVector(expandable,
              allocator,
              src.storage_size_,
              static_cast<uint32_t*>(allocator->Alloc(src.storage_size_ * kWordBytes))) {
  // Direct memcpy would be faster, but this should be fine too and is cleaner.
  Copy(&src);
}

BitVector::~BitVector() {
  if (storage_ != nullptr) {
    // Only free if we haven't been moved out of.
    allocator_->Free(storage_);
  }
}

bool BitVector::SameBitsSet(const BitVector *src) const {
  int our_highest = GetHighestBitSet();
  int src_highest = src->GetHighestBitSet();

  // If the highest bit set is different, we are different.
  if (our_highest != src_highest) {
    return false;
  }

  // If the highest bit set is -1, both are cleared, we are the same.
  // If the highest bit set is 0, both have a unique bit set, we are the same.
  if (our_highest <= 0) {
    return true;
  }

  // Get the highest bit set's cell's index
  // No need of highest + 1 here because it can't be 0 so BitsToWords will work here.
  int our_highest_index = BitsToWords(our_highest);

  // This memcmp is enough: we know that the highest bit set is the same for both:
  //   - Therefore, min_size goes up to at least that, we are thus comparing at least what we need to, but not less.
  //      ie. we are comparing all storage cells that could have difference, if both vectors have cells above our_highest_index,
  //          they are automatically at 0.
  return (memcmp(storage_, src->GetRawStorage(), our_highest_index * kWordBytes) == 0);
}

bool BitVector::IsSubsetOf(const BitVector *other) const {
  int this_highest = GetHighestBitSet();
  int other_highest = other->GetHighestBitSet();

  // If the highest bit set is -1, this is empty and a trivial subset.
  if (this_highest < 0) {
    return true;
  }

  // If the highest bit set is higher, this cannot be a subset.
  if (this_highest > other_highest) {
    return false;
  }

  // Compare each 32-bit word.
  size_t this_highest_index = BitsToWords(this_highest + 1);
  for (size_t i = 0; i < this_highest_index; ++i) {
    uint32_t this_storage = storage_[i];
    uint32_t other_storage = other->storage_[i];
    if ((this_storage | other_storage) != other_storage) {
      return false;
    }
  }
  return true;
}

void BitVector::Intersect(const BitVector* src) {
  uint32_t src_storage_size = src->storage_size_;

  // Get the minimum size between us and source.
  uint32_t min_size = (storage_size_ < src_storage_size) ? storage_size_ : src_storage_size;

  uint32_t idx;
  for (idx = 0; idx < min_size; idx++) {
    storage_[idx] &= src->GetRawStorageWord(idx);
  }

  // Now, due to this being an intersection, there are two possibilities:
  //   - Either src was larger than us: we don't care, all upper bits would thus be 0.
  //   - Either we are larger than src: we don't care, all upper bits would have been 0 too.
  // So all we need to do is set all remaining bits to 0.
  for (; idx < storage_size_; idx++) {
    storage_[idx] = 0;
  }
}

bool BitVector::Union(const BitVector* src) {
  // Get the highest bit to determine how much we need to expand.
  int highest_bit = src->GetHighestBitSet();
  bool changed = false;

  // If src has no bit set, we are done: there is no need for a union with src.
  if (highest_bit == -1) {
    return changed;
  }

  // Update src_size to how many cells we actually care about: where the bit is + 1.
  uint32_t src_size = BitsToWords(highest_bit + 1);

  // Is the storage size smaller than src's?
  if (storage_size_ < src_size) {
    changed = true;

    EnsureSize(highest_bit);

    // Check: storage size should be big enough to hold this bit now.
    DCHECK_LT(static_cast<uint32_t> (highest_bit), storage_size_ * kWordBits);
  }

  for (uint32_t idx = 0; idx < src_size; idx++) {
    uint32_t existing = storage_[idx];
    uint32_t update = existing | src->GetRawStorageWord(idx);
    if (existing != update) {
      changed = true;
      storage_[idx] = update;
    }
  }
  return changed;
}

bool BitVector::UnionIfNotIn(const BitVector* union_with, const BitVector* not_in) {
  // Get the highest bit to determine how much we need to expand.
  int highest_bit = union_with->GetHighestBitSet();
  bool changed = false;

  // If src has no bit set, we are done: there is no need for a union with src.
  if (highest_bit == -1) {
    return changed;
  }

  // Update union_with_size to how many cells we actually care about: where the bit is + 1.
  uint32_t union_with_size = BitsToWords(highest_bit + 1);

  // Is the storage size smaller than src's?
  if (storage_size_ < union_with_size) {
    EnsureSize(highest_bit);

    // Check: storage size should be big enough to hold this bit now.
    DCHECK_LT(static_cast<uint32_t> (highest_bit), storage_size_ * kWordBits);
  }

  uint32_t not_in_size = not_in->GetStorageSize();

  uint32_t idx = 0;
  for (; idx < std::min(not_in_size, union_with_size); idx++) {
    uint32_t existing = storage_[idx];
    uint32_t update = existing |
        (union_with->GetRawStorageWord(idx) & ~not_in->GetRawStorageWord(idx));
    if (existing != update) {
      changed = true;
      storage_[idx] = update;
    }
  }

  for (; idx < union_with_size; idx++) {
    uint32_t existing = storage_[idx];
    uint32_t update = existing | union_with->GetRawStorageWord(idx);
    if (existing != update) {
      changed = true;
      storage_[idx] = update;
    }
  }
  return changed;
}

void BitVector::Subtract(const BitVector *src) {
  uint32_t src_size = src->storage_size_;

  // We only need to operate on bytes up to the smaller of the sizes of the two operands.
  unsigned int min_size = (storage_size_ > src_size) ? src_size : storage_size_;

  // Difference until max, we know both accept it:
  //   There is no need to do more:
  //     If we are bigger than src, the upper bits are unchanged.
  //     If we are smaller than src, the nonexistent upper bits are 0 and thus can't get subtracted.
  for (uint32_t idx = 0; idx < min_size; idx++) {
    storage_[idx] &= (~(src->GetRawStorageWord(idx)));
  }
}

uint32_t BitVector::NumSetBits() const {
  uint32_t count = 0;
  for (uint32_t word = 0; word < storage_size_; word++) {
    count += POPCOUNT(storage_[word]);
  }
  return count;
}

uint32_t BitVector::NumSetBits(uint32_t end) const {
  DCHECK_LE(end, storage_size_ * kWordBits);
  return NumSetBits(storage_, end);
}

void BitVector::SetInitialBits(uint32_t num_bits) {
  // If num_bits is 0, clear everything.
  if (num_bits == 0) {
    ClearAllBits();
    return;
  }

  // Set the highest bit we want to set to get the BitVector allocated if need be.
  SetBit(num_bits - 1);

  uint32_t idx;
  // We can set every storage element with -1.
  for (idx = 0; idx < WordIndex(num_bits); idx++) {
    storage_[idx] = std::numeric_limits<uint32_t>::max();
  }

  // Handle the potentially last few bits.
  uint32_t rem_num_bits = num_bits & 0x1f;
  if (rem_num_bits != 0) {
    storage_[idx] = (1U << rem_num_bits) - 1;
    ++idx;
  }

  // Now set the upper ones to 0.
  for (; idx < storage_size_; idx++) {
    storage_[idx] = 0;
  }
}

int BitVector::GetHighestBitSet() const {
  unsigned int max = storage_size_;
  for (int idx = max - 1; idx >= 0; idx--) {
    // If not 0, we have more work: check the bits.
    uint32_t value = storage_[idx];

    if (value != 0) {
      // Return highest bit set in value plus bits from previous storage indexes.
      return 31 - CLZ(value) + (idx * kWordBits);
    }
  }

  // All zero, therefore return -1.
  return -1;
}

int BitVector::GetLowestBitCleared() const {
  uint32_t max = storage_size_;
  for (uint32_t idx = 0; idx < max; idx++) {
    uint32_t negated_value = ~storage_[idx];

    if (negated_value != 0) {
      // Return lowerest bit cleared in value plus bits from previous storage indexes.
      return CTZ(negated_value) + (idx * kWordBits);
    }
  }

  // All zero, therefore return -1.
  return -1;
}

void BitVector::Copy(const BitVector *src) {
  // Get highest bit set, we only need to copy till then.
  int highest_bit = src->GetHighestBitSet();

  // If nothing is set, clear everything.
  if (highest_bit == -1) {
    ClearAllBits();
    return;
  }

  // Set upper bit to ensure right size before copy.
  SetBit(highest_bit);

  // Now set until highest bit's storage.
  uint32_t size = 1 + (highest_bit / kWordBits);
  memcpy(storage_, src->GetRawStorage(), kWordBytes * size);

  // Set upper bits to 0.
  uint32_t left = storage_size_ - size;

  if (left > 0) {
    memset(storage_ + size, 0, kWordBytes * left);
  }
}

uint32_t BitVector::NumSetBits(const uint32_t* storage, uint32_t end) {
  uint32_t word_end = WordIndex(end);
  uint32_t partial_word_bits = end & 0x1f;

  uint32_t count = 0u;
  for (uint32_t word = 0u; word < word_end; word++) {
    count += POPCOUNT(storage[word]);
  }
  if (partial_word_bits != 0u) {
    count += POPCOUNT(storage[word_end] & ~(0xffffffffu << partial_word_bits));
  }
  return count;
}

void BitVector::Dump(std::ostream& os, const char *prefix) const {
  std::ostringstream buffer;
  DumpHelper(prefix, buffer);
  os << buffer.str() << std::endl;
}

void BitVector::DumpHelper(const char* prefix, std::ostringstream& buffer) const {
  // Initialize it.
  if (prefix != nullptr) {
    buffer << prefix;
  }

  buffer << '(';
  for (size_t i = 0; i < storage_size_ * kWordBits; i++) {
    buffer << IsBitSet(i);
  }
  buffer << ')';
}

void BitVector::EnsureSize(uint32_t idx) {
  if (idx >= storage_size_ * kWordBits) {
    DCHECK(expandable_) << "Attempted to expand a non-expandable bitmap to position " << idx;

    /* Round up to word boundaries for "idx+1" bits */
    uint32_t new_size = BitsToWords(idx + 1);
    DCHECK_GT(new_size, storage_size_);
    uint32_t *new_storage =
        static_cast<uint32_t*>(allocator_->Alloc(new_size * kWordBytes));
    memcpy(new_storage, storage_, storage_size_ * kWordBytes);
    // Zero out the new storage words.
    memset(&new_storage[storage_size_], 0, (new_size - storage_size_) * kWordBytes);
    // TODO: collect stats on space wasted because of resize.

    // Free old storage.
    allocator_->Free(storage_);

    // Set fields.
    storage_ = new_storage;
    storage_size_ = new_size;
  }
}

Allocator* BitVector::GetAllocator() const {
  return allocator_;
}

}  // namespace art

Messung V0.5 in Prozent
C=91 H=95 G=92

¤ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet am  2026-06-29) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik