Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  cis_disconnection.py

  Sprache: Python
 

# Copyright 2025 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import hci_packets as hci
import link_layer_packets as ll
import llcp_packets as llcp
import random
import unittest
from hci_packets import ErrorCode
from py.bluetooth import Address
from py.controller import ControllerTest, generate_rpa


class Test(ControllerTest):

    SDU_Interval_C_TO_P = 10000  # 10ms
    SDU_Interval_P_TO_C = 10000  # 10ms
    ISO_Interval = 16  # 20ms
    Sub_Interval = 7500  # 7.5ms (approximation)
    CIG_Sync_Delay = 7500  # 7.5ms (approximation)
    CIS_Sync_Delay = 7500  # 7.5ms (approximation)
    Worst_Case_SCA = hci.ClockAccuracy.PPM_500
    Packing = hci.Packing.SEQUENTIAL
    Framing = hci.Enable.DISABLED
    NSE = 4
    Max_SDU_C_TO_P = 130
    Max_SDU_P_TO_C = 130
    Max_PDU_C_TO_P = 130
    Max_PDU_P_TO_C = 130
    PHY_C_TO_P = 0x1
    PHY_P_TO_C = 0x1
    FT_C_TO_P = 1
    FT_P_TO_C = 1
    BN_C_TO_P = 2
    BN_P_TO_C = 2
    Max_Transport_Latency_C_TO_P = 40000  # 40ms
    Max_Transport_Latency_P_TO_C = 40000  # 40ms
    RTN_C_TO_P = 3
    RTN_P_TO_C = 3

    # Test the behavior of the controller when disconnecting the
    # ACL connection for a peripheral CIS that is in accepting state.
    async def test_peripheral_accepting(self):
        # Test parameters.
        cig_id = 0x12
        cis_id = 0x42
        cis_connection_handle = 0xe00
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        controller = self.controller

        # Enable Connected Isochronous Stream Host Support.
        await self.enable_connected_isochronous_stream_host_support()

        # Prelude: Establish an ACL connection as peripheral with the IUT.
        acl_connection_handle = await self.establish_le_connection_peripheral(peer_address)

        # The Lower Tester sends an LL_CIS_REQ to the IUT.
        controller.send_llcp(source_address=peer_address,
                             destination_address=controller.address,
                             pdu=llcp.CisReq(cig_id=cig_id,
                                             cis_id=cis_id,
                                             phy_c_to_p=hci.PhyType.LE_1M,
                                             phy_p_to_c=hci.PhyType.LE_1M,
                                             framed=self.Framing == hci.Enable.ENABLED,
                                             max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                             max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                             sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                             sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                             max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                             max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                             nse=self.NSE,
                                             sub_interval=self.Sub_Interval,
                                             bn_p_to_c=self.BN_C_TO_P,
                                             bn_c_to_p=self.BN_P_TO_C,
                                             ft_c_to_p=self.FT_C_TO_P,
                                             ft_p_to_c=self.FT_P_TO_C,
                                             iso_interval=self.ISO_Interval,
                                             cis_offset_min=0,
                                             cis_offset_max=0,
                                             conn_event_count=0))

        # The IUT sends an HCI_LE_CIS_Request event to the Upper Tester and the parameters include
        # CIS_Connection_Handle assigned by the IUT.
        await self.expect_evt(
            hci.LeCisRequest(acl_connection_handle=acl_connection_handle,
                             cis_connection_handle=cis_connection_handle,
                             cig_id=cig_id,
                             cis_id=cis_id))

        # The ACL connection is disconnected before the Host can accept the CIS request.
        controller.send_ll(
            ll.Disconnect(source_address=peer_address,
                          destination_address=controller.address,
                          reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller sends HCI Disconnection Complete event for the ACL
        # connection, but the pending CIS connection is silently dropped.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=acl_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

    # Test the behavior of the controller when disconnecting the
    # ACL connection for a peripheral CIS that is in accepted state, pending the
    # CIS connection indication.
    async def test_peripheral_accepted(self):
        # Test parameters.
        cig_id = 0x12
        cis_id = 0x42
        cis_connection_handle = 0xe00
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        controller = self.controller

        # Enable Connected Isochronous Stream Host Support.
        await self.enable_connected_isochronous_stream_host_support()

        # Prelude: Establish an ACL connection as peripheral with the IUT.
        acl_connection_handle = await self.establish_le_connection_peripheral(peer_address)

        # The Lower Tester sends an LL_CIS_REQ to the IUT.
        controller.send_llcp(source_address=peer_address,
                             destination_address=controller.address,
                             pdu=llcp.CisReq(cig_id=cig_id,
                                             cis_id=cis_id,
                                             phy_c_to_p=hci.PhyType.LE_1M,
                                             phy_p_to_c=hci.PhyType.LE_1M,
                                             framed=self.Framing == hci.Enable.ENABLED,
                                             max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                             max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                             sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                             sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                             max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                             max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                             nse=self.NSE,
                                             sub_interval=self.Sub_Interval,
                                             bn_p_to_c=self.BN_C_TO_P,
                                             bn_c_to_p=self.BN_P_TO_C,
                                             ft_c_to_p=self.FT_C_TO_P,
                                             ft_p_to_c=self.FT_P_TO_C,
                                             iso_interval=self.ISO_Interval,
                                             cis_offset_min=0,
                                             cis_offset_max=0,
                                             conn_event_count=0))

        # The IUT sends an HCI_LE_CIS_Request event to the Upper Tester and the parameters include
        # CIS_Connection_Handle assigned by the IUT.
        await self.expect_evt(
            hci.LeCisRequest(acl_connection_handle=acl_connection_handle,
                             cis_connection_handle=cis_connection_handle,
                             cig_id=cig_id,
                             cis_id=cis_id))

        # The Upper Tester accepts the CIS request.
        controller.send_cmd(hci.LeAcceptCisRequest(connection_handle=cis_connection_handle))

        # The IUT sends a successful Command Status to the Upper Tester.
        await self.expect_evt(
            hci.LeAcceptCisRequestStatus(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # The IUT sends an LL_CIS_RSP PDU to the Upper Tester. In the message, the CIS_Offset_Min
        # field and the CIS_Offset_Max field are equal to or a subset of the values received in the
        # LL_CIS_REQ sent in step 2.
        cis_rsp = await self.expect_llcp(source_address=controller.address,
                                         destination_address=peer_address,
                                         expected_pdu=llcp.CisRsp(cis_offset_min=self.Any,
                                                                  cis_offset_max=self.Any,
                                                                  conn_event_count=0))

        # The ACL connection is disconnected before the Lower Tester sends back LL_CIS_IND.
        controller.send_ll(
            ll.Disconnect(source_address=peer_address,
                          destination_address=controller.address,
                          reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller send HCI LE Cis Established for to notify of the status
        # of the CIS connection.
        await self.expect_evt(
            hci.LeCisEstablishedV1(status=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION,
                                   connection_handle=self.Any))

        # The controller sends HCI Disconnection Complete event for the ACL
        # connection, but the pending CIS connection is silently dropped.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=acl_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

    # Test the behavior of the controller when disconnecting the
    # ACL connection for a peripheral CIS that is in connected state.
    async def test_peripheral_connected(self):
        # Test parameters.
        cig_id = 0x12
        cis_id = 0x42
        cis_connection_handle = 0xe00
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        controller = self.controller

        # Enable Connected Isochronous Stream Host Support.
        await self.enable_connected_isochronous_stream_host_support()

        # Prelude: Establish an ACL connection as peripheral with the IUT.
        acl_connection_handle = await self.establish_le_connection_peripheral(peer_address)

        # The Lower Tester sends an LL_CIS_REQ to the IUT.
        controller.send_llcp(source_address=peer_address,
                             destination_address=controller.address,
                             pdu=llcp.CisReq(cig_id=cig_id,
                                             cis_id=cis_id,
                                             phy_c_to_p=hci.PhyType.LE_1M,
                                             phy_p_to_c=hci.PhyType.LE_1M,
                                             framed=self.Framing == hci.Enable.ENABLED,
                                             max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                             max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                             sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                             sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                             max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                             max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                             nse=self.NSE,
                                             sub_interval=self.Sub_Interval,
                                             bn_p_to_c=self.BN_C_TO_P,
                                             bn_c_to_p=self.BN_P_TO_C,
                                             ft_c_to_p=self.FT_C_TO_P,
                                             ft_p_to_c=self.FT_P_TO_C,
                                             iso_interval=self.ISO_Interval,
                                             cis_offset_min=0,
                                             cis_offset_max=0,
                                             conn_event_count=0))

        # The IUT sends an HCI_LE_CIS_Request event to the Upper Tester and the parameters include
        # CIS_Connection_Handle assigned by the IUT.
        await self.expect_evt(
            hci.LeCisRequest(acl_connection_handle=acl_connection_handle,
                             cis_connection_handle=cis_connection_handle,
                             cig_id=cig_id,
                             cis_id=cis_id))

        # The Upper Tester accepts the CIS request.
        controller.send_cmd(hci.LeAcceptCisRequest(connection_handle=cis_connection_handle))

        # The IUT sends a successful Command Status to the Upper Tester.
        await self.expect_evt(
            hci.LeAcceptCisRequestStatus(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # The IUT sends an LL_CIS_RSP PDU to the Upper Tester. In the message, the CIS_Offset_Min
        # field and the CIS_Offset_Max field are equal to or a subset of the values received in the
        # LL_CIS_REQ sent in step 2.
        cis_rsp = await self.expect_llcp(source_address=controller.address,
                                         destination_address=peer_address,
                                         expected_pdu=llcp.CisRsp(cis_offset_min=self.Any,
                                                                  cis_offset_max=self.Any,
                                                                  conn_event_count=0))

        # The Lower Tester sends an LL_CIS_IND where the CIS_Offset is the time (ms) from the start of
        # the ACL connection event in connEvent Count to the first CIS anchor point, the CIS_Sync_Delay
        # is CIG_Sync_Delay minus the offset from the CIG reference point to the CIS anchor point in s,
        # and the connEventCount is the CIS_Offset reference point.
        controller.send_llcp(source_address=peer_address,
                             destination_address=controller.address,
                             pdu=llcp.CisInd(aa=0,
                                             cis_offset=cis_rsp.cis_offset_max,
                                             cig_sync_delay=self.CIG_Sync_Delay,
                                             cis_sync_delay=self.CIS_Sync_Delay,
                                             conn_event_count=0))

        # The IUT sends a successful HCI_LE_CIS_Established event to the Upper Tester, after the first
        # CIS packet sent by the Lower Tester. The Connection_Handle parameter is the
        # CIS_Connection_Handle value provided in the HCI_LE_CIS_Request event.
        await self.expect_evt(
            hci.LeCisEstablishedV1(status=ErrorCode.SUCCESS,
                                   connection_handle=cis_connection_handle,
                                   cig_sync_delay=self.CIG_Sync_Delay,
                                   cis_sync_delay=self.CIS_Sync_Delay,
                                   transport_latency_c_to_p=self.Any,
                                   transport_latency_p_to_c=self.Any,
                                   phy_c_to_p=hci.SecondaryPhyType.LE_1M,
                                   phy_p_to_c=hci.SecondaryPhyType.LE_1M,
                                   nse=self.NSE,
                                   bn_c_to_p=self.BN_C_TO_P,
                                   bn_p_to_c=self.BN_P_TO_C,
                                   ft_c_to_p=self.FT_C_TO_P,
                                   ft_p_to_c=self.FT_P_TO_C,
                                   max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                   max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                   iso_interval=self.ISO_Interval))

        # The ACL connection is disconnected when the CIS connection is fully established.
        controller.send_ll(
            ll.Disconnect(source_address=peer_address,
                          destination_address=controller.address,
                          reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller send HCI LE Cis Established for to notify of the status
        # of the CIS connection.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=cis_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller sends HCI Disconnection Complete event for the ACL
        # connection, but the pending CIS connection is silently dropped.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=acl_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

    # Test the behavior of the controller when disconnecting the
    # ACL connection for a peripheral CIS that is in accepted state, pending the
    # CIS connection indication.
    async def test_central_initiating(self):
        # Test parameters.
        cig_id = 0x12
        cis_id = 0x42
        cis_connection_handle = 0xe00
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        controller = self.controller

        # Enable Connected Isochronous Stream Host Support.
        await self.enable_connected_isochronous_stream_host_support()

        # Prelude: Establish an ACL connection as central with the IUT.
        acl_connection_handle = await self.establish_le_connection_central(peer_address)

        # The Upper Tester sends an HCI_LE_Set_CIG_Parameters_Test command to the IUT with
        # CIS_Count set to 1, BN, FT, NSE, PHY_C_TO_P[], PHY_P_TO_C[] and ISO_Interval to be set to
        # the values specified in Table 4.135 and Table 4.136. Any remaining values are assigned the
        # default values as specified in Section 4.10.1.3 Default Values for Set CIG Parameters
        # Commands. The Upper Tester receives a successful HCI_Command_Complete event with a
        # valid Connection_Handle from the IUT and CIS_Count = 1.
        controller.send_cmd(
            hci.LeSetCigParametersTest(cig_id=cig_id,
                                       sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                       sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                       ft_c_to_p=self.FT_C_TO_P,
                                       ft_p_to_c=self.FT_P_TO_C,
                                       iso_interval=self.ISO_Interval,
                                       worst_case_sca=self.Worst_Case_SCA,
                                       packing=self.Packing,
                                       framing=self.Framing,
                                       cis_config=[
                                           hci.LeCisParametersTestConfig(
                                               cis_id=cis_id,
                                               nse=self.NSE,
                                               max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                               max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                               max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                               max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                               phy_c_to_p=self.PHY_C_TO_P,
                                               phy_p_to_c=self.PHY_P_TO_C,
                                               bn_c_to_p=self.BN_C_TO_P,
                                               bn_p_to_c=self.BN_P_TO_C)
                                       ]))

        await self.expect_evt(
            hci.LeSetCigParametersTestComplete(status=ErrorCode.SUCCESS,
                                               num_hci_command_packets=1,
                                               cig_id=cig_id,
                                               connection_handle=[cis_connection_handle]))

        # The Upper Tester sends an HCI_LE_Create_CIS command to the IUT with the
        # ACL_Connection_Handle of the established ACL connection and CIS_Count set to 1. The Upper
        # Tester receives a Status of Success from the IUT.
        controller.send_cmd(
            hci.LeCreateCis(cis_config=[
                hci.LeCreateCisConfig(cis_connection_handle=cis_connection_handle,
                                      acl_connection_handle=acl_connection_handle)
            ]))

        await self.expect_evt(
            hci.LeCreateCisStatus(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # The Lower Tester receives an LL_CIS_REQ PDU from the IUT with all fields set to valid values.
        # CIS_Offset_Min is a value between 500µs and TSPX_conn_interval, CIS_Offset_Max is a value
        # between CIS_Offset_Min and the CIS_Offset_Max value as calculated in [14] Section 2.4.2.29
        # using TSPX_conn_interval as the value of connInterval, and connEventCount is the reference
        # event anchor point for which the offsets applied.
        cis_req = await self.expect_llcp(source_address=controller.address,
                                         destination_address=peer_address,
                                         expected_pdu=llcp.CisReq(
                                             cig_id=cig_id,
                                             cis_id=cis_id,
                                             phy_c_to_p=hci.PhyType.LE_1M,
                                             phy_p_to_c=hci.PhyType.LE_1M,
                                             framed=self.Framing == hci.Enable.ENABLED,
                                             max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                             max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                             sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                             sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                             max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                             max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                             nse=self.NSE,
                                             sub_interval=self.Any,
                                             bn_p_to_c=self.BN_C_TO_P,
                                             bn_c_to_p=self.BN_P_TO_C,
                                             ft_c_to_p=self.FT_C_TO_P,
                                             ft_p_to_c=self.FT_P_TO_C,
                                             iso_interval=self.ISO_Interval,
                                             cis_offset_min=self.Any,
                                             cis_offset_max=self.Any,
                                             conn_event_count=0))

        # The ACL connection is disconnected before the Lower Tester sends back LL_CIS_RSP.
        controller.send_ll(
            ll.Disconnect(source_address=peer_address,
                          destination_address=controller.address,
                          reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller send HCI LE Cis Established for to notify of the status
        # of the CIS connection.
        await self.expect_evt(
            hci.LeCisEstablishedV1(status=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION,
                                   connection_handle=cis_connection_handle))

        # The controller sends HCI Disconnection Complete event for the ACL
        # connection.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=acl_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

    # Test the behavior of the controller when disconnecting the
    # ACL connection for a central CIS that is in connected state.
    async def test_central_connected(self):
        # Test parameters.
        cig_id = 0x12
        cis_id = 0x42
        cis_connection_handle = 0xe00
        peer_address = Address('aa:bb:cc:dd:ee:ff')
        controller = self.controller

        # Enable Connected Isochronous Stream Host Support.
        await self.enable_connected_isochronous_stream_host_support()

        # Prelude: Establish an ACL connection as central with the IUT.
        acl_connection_handle = await self.establish_le_connection_central(peer_address)

        # The Upper Tester sends an HCI_LE_Set_CIG_Parameters_Test command to the IUT with
        # CIS_Count set to 1, BN, FT, NSE, PHY_C_TO_P[], PHY_P_TO_C[] and ISO_Interval to be set to
        # the values specified in Table 4.135 and Table 4.136. Any remaining values are assigned the
        # default values as specified in Section 4.10.1.3 Default Values for Set CIG Parameters
        # Commands. The Upper Tester receives a successful HCI_Command_Complete event with a
        # valid Connection_Handle from the IUT and CIS_Count = 1.
        controller.send_cmd(
            hci.LeSetCigParametersTest(cig_id=cig_id,
                                       sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                       sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                       ft_c_to_p=self.FT_C_TO_P,
                                       ft_p_to_c=self.FT_P_TO_C,
                                       iso_interval=self.ISO_Interval,
                                       worst_case_sca=self.Worst_Case_SCA,
                                       packing=self.Packing,
                                       framing=self.Framing,
                                       cis_config=[
                                           hci.LeCisParametersTestConfig(
                                               cis_id=cis_id,
                                               nse=self.NSE,
                                               max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                               max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                               max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                               max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                               phy_c_to_p=self.PHY_C_TO_P,
                                               phy_p_to_c=self.PHY_P_TO_C,
                                               bn_c_to_p=self.BN_C_TO_P,
                                               bn_p_to_c=self.BN_P_TO_C)
                                       ]))

        await self.expect_evt(
            hci.LeSetCigParametersTestComplete(status=ErrorCode.SUCCESS,
                                               num_hci_command_packets=1,
                                               cig_id=cig_id,
                                               connection_handle=[cis_connection_handle]))

        # The Upper Tester sends an HCI_LE_Create_CIS command to the IUT with the
        # ACL_Connection_Handle of the established ACL connection and CIS_Count set to 1. The Upper
        # Tester receives a Status of Success from the IUT.
        controller.send_cmd(
            hci.LeCreateCis(cis_config=[
                hci.LeCreateCisConfig(cis_connection_handle=cis_connection_handle,
                                      acl_connection_handle=acl_connection_handle)
            ]))

        await self.expect_evt(
            hci.LeCreateCisStatus(status=ErrorCode.SUCCESS, num_hci_command_packets=1))

        # The Lower Tester receives an LL_CIS_REQ PDU from the IUT with all fields set to valid values.
        # CIS_Offset_Min is a value between 500µs and TSPX_conn_interval, CIS_Offset_Max is a value
        # between CIS_Offset_Min and the CIS_Offset_Max value as calculated in [14] Section 2.4.2.29
        # using TSPX_conn_interval as the value of connInterval, and connEventCount is the reference
        # event anchor point for which the offsets applied.
        cis_req = await self.expect_llcp(source_address=controller.address,
                                         destination_address=peer_address,
                                         expected_pdu=llcp.CisReq(
                                             cig_id=cig_id,
                                             cis_id=cis_id,
                                             phy_c_to_p=hci.PhyType.LE_1M,
                                             phy_p_to_c=hci.PhyType.LE_1M,
                                             framed=self.Framing == hci.Enable.ENABLED,
                                             max_sdu_c_to_p=self.Max_SDU_C_TO_P,
                                             max_sdu_p_to_c=self.Max_SDU_P_TO_C,
                                             sdu_interval_c_to_p=self.SDU_Interval_C_TO_P,
                                             sdu_interval_p_to_c=self.SDU_Interval_P_TO_C,
                                             max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                             max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                             nse=self.NSE,
                                             sub_interval=self.Any,
                                             bn_p_to_c=self.BN_C_TO_P,
                                             bn_c_to_p=self.BN_P_TO_C,
                                             ft_c_to_p=self.FT_C_TO_P,
                                             ft_p_to_c=self.FT_P_TO_C,
                                             iso_interval=self.ISO_Interval,
                                             cis_offset_min=self.Any,
                                             cis_offset_max=self.Any,
                                             conn_event_count=0))

        # The Lower Tester sends an LL_CIS_RSP PDU to the IUT.
        controller.send_llcp(source_address=peer_address,
                             destination_address=controller.address,
                             pdu=llcp.CisRsp(cis_offset_min=cis_req.cis_offset_min,
                                             cis_offset_max=cis_req.cis_offset_max,
                                             conn_event_count=0))

        # The Lower Tester receives an LL_CIS_IND from the IUT where the CIS_Offset is the time (ms)
        # from the start of the ACL connection event in connEvent Count to the first CIS anchor point, the
        # CIS_Sync_Delay is CIG_Sync_Delay minus the offset from the CIG reference point to the CIS
        # anchor point in s, and the connEventCount is the CIS_Offset reference point.
        cis_ind = await self.expect_llcp(source_address=controller.address,
                                         destination_address=peer_address,
                                         expected_pdu=llcp.CisInd(aa=0,
                                                                  cis_offset=self.Any,
                                                                  cig_sync_delay=self.Any,
                                                                  cis_sync_delay=self.Any,
                                                                  conn_event_count=0))

        # 7. The Upper Tester receives a successful HCI_LE_CIS_Established event with the NSE, BN, FT,
        # and Max_PDU parameters as set in step 1 from the IUT, after the first CIS packet sent by the LT.
        # The Connection_Handle parameter is set to the value provided in the HCI_LE_Create_CIS
        # command.
        await self.expect_evt(
            hci.LeCisEstablishedV1(status=ErrorCode.SUCCESS,
                                   connection_handle=cis_connection_handle,
                                   cig_sync_delay=cis_ind.cig_sync_delay,
                                   cis_sync_delay=cis_ind.cis_sync_delay,
                                   transport_latency_c_to_p=self.Any,
                                   transport_latency_p_to_c=self.Any,
                                   phy_c_to_p=hci.SecondaryPhyType.LE_1M,
                                   phy_p_to_c=hci.SecondaryPhyType.LE_1M,
                                   nse=self.NSE,
                                   bn_c_to_p=self.BN_C_TO_P,
                                   bn_p_to_c=self.BN_P_TO_C,
                                   ft_c_to_p=self.FT_C_TO_P,
                                   ft_p_to_c=self.FT_P_TO_C,
                                   max_pdu_c_to_p=self.Max_PDU_C_TO_P,
                                   max_pdu_p_to_c=self.Max_PDU_P_TO_C,
                                   iso_interval=self.ISO_Interval))

        # The ACL connection is disconnected after the CIS is established.
        controller.send_ll(
            ll.Disconnect(source_address=peer_address,
                          destination_address=controller.address,
                          reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller send HCI Disconnection Complete event to notify of the status
        # of the CIS connection.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=cis_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

        # The controller sends HCI Disconnection Complete event for the ACL
        # connection.
        await self.expect_evt(
            hci.DisconnectionComplete(status=hci.ErrorCode.SUCCESS,
                                      connection_handle=acl_connection_handle,
                                      reason=hci.ErrorCode.REMOTE_USER_TERMINATED_CONNECTION))

Messung V0.5 in Prozent
C=84 H=93 G=88

¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet am  2026-06-27) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik