/* * Copyright 2007 The Android Open Source Project * * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file.
*/
/** Given the byte size of the index buffer to be passed to the matrix proc, return the maximum number of resulting pixels that can be computed (i.e. the number of SkPMColor values to be written by the sample proc). This routine takes into account that filtering and scale-vs-affine affect the amount of buffer space needed.
Only valid to call after chooseProcs (setContext) has been called. It is safe to call this inside the shader's shadeSpan() method.
*/ int maxCountForBufferSize(size_t bufferSize) const;
// If a shader proc is present, then the corresponding matrix/sample procs // are ignored
ShaderProc32 getShaderProc32() const { return fShaderProc32; }
private: enum {
kBMStateSize = 136 // found by inspection. if too small, we will call new/delete
};
SkSTArenaAlloc<kBMStateSize> fAlloc;
ShaderProc32 fShaderProc32; // chooseProcs // These are used if the shaderproc is nullptr
MatrixProc fMatrixProc; // chooseProcs
SampleProc32 fSampleProc32; // chooseProcs
// Return false if we failed to setup for fast translate (e.g. overflow) bool setupForTranslate();
#ifdef SK_DEBUG staticvoid DebugMatrixProc(const SkBitmapProcState&,
uint32_t[], int count, int x, int y); #endif
};
/* Macros for packing and unpacking pairs of 16bit values in a 32bit uint. Used to allow access to a stream of uint16_t either one at a time, or 2 at a time by unpacking a uint32_t
*/ #ifdef SK_CPU_BENDIAN #define PACK_TWO_SHORTS(pri, sec) ((pri) << 16 | (sec)) #define UNPACK_PRIMARY_SHORT(packed) ((uint32_t)(packed) >> 16) #define UNPACK_SECONDARY_SHORT(packed) ((packed) & 0xFFFF) #else #define PACK_TWO_SHORTS(pri, sec) ((pri) | ((sec) << 16)) #define UNPACK_PRIMARY_SHORT(packed) ((packed) & 0xFFFF) #define UNPACK_SECONDARY_SHORT(packed) ((uint32_t)(packed) >> 16) #endif
// Helper class for mapping the middle of pixel (x, y) into SkFractionalInt bitmap space. // Discussion: // Overall, this code takes a point in destination space, and uses the center of the pixel // at (x, y) to determine the sample point in source space. It then adjusts the pixel by different // amounts based in filtering and tiling. // This code can be broken into two main cases based on filtering: // * no filtering (nearest neighbor) - when using nearest neighbor filtering all tile modes reduce // the sampled by one ulp. If a simple point pt lies precisely on XXX.1/2 then it forced down // when positive making 1/2 + 1/2 = .999999 instead of 1.0. // * filtering - in the filtering case, the code calculates the -1/2 shift for starting the // bilerp kernel. There is a twist; there is a big difference between clamp and the other tile // modes. In tile and repeat the matrix has been reduced by an additional 1/width and 1/height // factor. This maps from destination space to [0, 1) (instead of source space) to allow easy // modulo arithmetic. This means that the -1/2 needed by bilerp is actually 1/2 * 1/width for x // and 1/2 * 1/height for y. This is what happens when the poorly named fFilterOne{X|Y} is // divided by two. class SkBitmapProcStateAutoMapper { public:
SkBitmapProcStateAutoMapper(const SkBitmapProcState& s, int x, int y,
SkPoint* scalarPoint = nullptr) {
SkPoint pt;
s.fInvProc(s.fInvMatrix,
SkIntToScalar(x) + SK_ScalarHalf,
SkIntToScalar(y) + SK_ScalarHalf, &pt);
SkFixed biasX = 0, biasY = 0; if (s.fBilerp) {
biasX = s.fFilterOneX >> 1;
biasY = s.fFilterOneY >> 1;
} else { // Our rasterizer biases upward. That is a rect from 0.5...1.5 fills pixel 1 and not // pixel 0. To make an image that is mapped 1:1 with device pixels but at a half pixel // offset select every pixel from the src image once we make exact integer pixel sample // values round down not up. Note that a mirror mapping will not have this property.
biasX = 1;
biasY = 1;
}
// punt to unsigned for defined underflow behavior
fX = (SkFractionalInt)((uint64_t)SkScalarToFractionalInt(pt.x()) -
(uint64_t)SkFixedToFractionalInt(biasX));
fY = (SkFractionalInt)((uint64_t)SkScalarToFractionalInt(pt.y()) -
(uint64_t)SkFixedToFractionalInt(biasY));
int intX() const { return SkFractionalIntToInt(fX); } int intY() const { return SkFractionalIntToInt(fY); }
private:
SkFractionalInt fX, fY;
};
namespace sktests { // f is the value to pack, max is the largest the value can be.
uint32_t pack_clamp(SkFixed f, unsigned max); // As above, but width is the width of the pretend bitmap.
uint32_t pack_repeat(SkFixed f, unsigned max, size_t width);
uint32_t pack_mirror(SkFixed f, unsigned max, size_t width);
}
namespace SkOpts { // SkBitmapProcState optimized Shader, Sample, or Matrix procs. externvoid (*S32_alpha_D32_filter_DX)(const SkBitmapProcState&, const uint32_t* xy, int count, SkPMColor*); externvoid (*S32_alpha_D32_filter_DXDY)(const SkBitmapProcState&, const uint32_t* xy, int count, SkPMColor*);
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
